| Age | Commit message (Collapse) | Author |
|---|
|
SPI thread wakes up to perform SPI transfer whenever there is an TX skb
from n/w stack or interrupt from MAC-PHY. Ethernet frame from TX skb is
transferred based on the availability tx credits in the MAC-PHY which is
reported from the previous SPI transfer. Sometimes there is a possibility
that TX skb is available to transmit but there is no tx credits from
MAC-PHY. In this case, there will not be any SPI transfer but the thread
will be running in an endless loop until tx credits available again.
So checking the availability of tx credits along with TX skb will prevent
the above infinite loop. When the tx credits available again that will be
notified through interrupt which will trigger the SPI transfer to get the
available tx credits.
Fixes: 53fbde8ab21e ("net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_kasprintf() can fail and return NULL, add missing return value
checks.
Fixes: 0ac2a08f42ce ("interconnect: add clk-based icc provider support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202165723.17292-1-brgl@bgdev.pl
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
array
The following UBSAN error is reported during boot on the db410c board on
a clang-19 build:
Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
...
pc : qnoc_probe+0x5f8/0x5fc
...
The cause of the error is that the counter member was not set before
accessing the annotated flexible array member, but after that. Fix this
by initializing it earlier.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYs+2mBz1y2dAzxkj9-oiBJ2Acm1Sf1h2YQ3VmBqj_VX2g@mail.gmail.com
Fixes: dd4904f3b924 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241203223334.233404-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).
Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The source and destination rings were incorrectly assigned during the ring
linking process. The "source" ring, which contains the new segments,
was not spliced into the "destination" ring, leading to incorrect ring
expansion.
Fixes: fe688e500613 ("usb: xhci: refactor xhci_link_rings() to use source and destination rings")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Closes: https://lore.kernel.org/lkml/CAAJw_ZtppNqC9XA=-WVQDr+vaAS=di7jo15CzSqONeX48H75MA@mail.gmail.com/
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHC hosts from several vendors have the same issue where endpoints start
so slowly that a later queued 'Stop Endpoint' command may complete before
endpoint is up and running.
The 'Stop Endpoint' command fails with context state error as the endpoint
still appears as stopped.
See commit 42b758137601 ("usb: xhci: Limit Stop Endpoint retries") for
details
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On gt reset, if a context is running, then accumulate it's active time
into the busyness counter since there will be no chance for the context
to switch out and update it's run time.
v2: Move comment right above the if (John)
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Active busyness of an engine is calculated using gt timestamp and the
context switch in time. While capturing the gt timestamp, it's possible
that the context switches out. This race could result in an active
busyness value that is greater than the actual context runtime value by a
small amount. This leads to a negative delta and throws off busyness
calculations for the user.
If a subsequent count is smaller than the previous one, just return the
previous one, since we expect the busyness to catch up.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
(cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
On GT reset, we store total busyness counts for all engines and
re-register the utilization buffer with GuC. At that time we should
reset the buffer, so that we don't get spurious busyness counts on
subsequent queries.
To repro this issue, run igt@perf_pmu@busy-hang followed by
igt@perf_pmu@most-busy-idle-check-all for a couple iterations.
Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
There is a check for NULL at the start of create_txqs() and
create_rxqs() which tess if "nic_dev->txqs" is non-NULL. The
intention is that if the device is already open and the queues
are already created then we don't create them a second time.
However, the bug is that if we have an error in the create_txqs()
then the pointer doesn't get set back to NULL. The NULL check
at the start of the function will say that it's already open when
it's not and the device can't be used.
Set ->txqs back to NULL on cleanup on error.
Fixes: c3e79baf1b03 ("net-next/hinic: Add logical Txq and Rxq")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0cc98faf-a0ed-4565-a55b-0fa2734bc205@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small follow-up to align this to an equivalent behavior as the bond driver.
The change in 3625920b62c3 ("teaming: fix vlan_features computing") removed
the netdevice vlan_features when there is no team port attached, yet it
leaves the full set of enc_features intact.
Instead, leave the default features as pre 3625920b62c3, and recompute once
we do have ports attached. Also, similarly as in bonding case, call the
netdev_base_features() helper on the enc_features.
Fixes: 3625920b62c3 ("teaming: fix vlan_features computing")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241213123657.401868-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len +
sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition
could have an integer wrapping bug. Use size_add() to prevent this.
Fixes: a08943947873 ("crypto: chtls - Register chtls with net tls")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c6bfb23c-2db2-4e1b-b8ab-ba3925c82ef5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Registers
The values returned by the driver after processing the contents of the
Temperature Result and the Temperature Limit Registers do not correspond to
the TMP512/TMP513 specifications. A raw register value is converted to a
signed integer value by a sign extension in accordance with the algorithm
provided in the specification, but due to the off-by-one error in the sign
bit index, the result is incorrect.
According to the TMP512 and TMP513 datasheets, the Temperature Result (08h
to 0Bh) and Limit (11h to 14h) Registers are 13-bit two's complement
integer values, shifted left by 3 bits. The value is scaled by 0.0625
degrees Celsius per bit. E.g., if regval = 1 1110 0111 0000 000, the
output should be -25 degrees, but the driver will return +487 degrees.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-4-m.masimov@maxima.ru
[groeck: fixed description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The value returned by the driver after processing the contents of the
Current Register does not correspond to the TMP512/TMP513 specifications.
A raw register value is converted to a signed integer value by a sign
extension in accordance with the algorithm provided in the specification,
but due to the off-by-one error in the sign bit index, the result is
incorrect. Moreover, negative values will be reported as large positive
due to missing sign extension from u32 to long.
According to the TMP512 and TMP513 datasheets, the Current Register (07h)
is a 16-bit two's complement integer value. E.g., if regval = 1000 0011
0000 0000, then the value must be (-32000 * lsb), but the driver will
return (33536 * lsb).
Fix off-by-one bug, and also cast data->curr_lsb_ua (which is of type u32)
to long to prevent incorrect cast for negative values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-3-m.masimov@maxima.ru
[groeck: Fixed description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Registers
The values returned by the driver after processing the contents of the
Shunt Voltage Register and the Shunt Limit Registers do not correspond to
the TMP512/TMP513 specifications. A raw register value is converted to a
signed integer value by a sign extension in accordance with the algorithm
provided in the specification, but due to the off-by-one error in the sign
bit index, the result is incorrect. Moreover, the PGA shift calculated with
the tmp51x_get_pga_shift function is relevant only to the Shunt Voltage
Register, but is also applied to the Shunt Limit Registers.
According to the TMP512 and TMP513 datasheets, the Shunt Voltage Register
(04h) is 13 to 16 bit two's complement integer value, depending on the PGA
setting. The Shunt Positive (0Ch) and Negative (0Dh) Limit Registers are
16-bit two's complement integer values. Below are some examples:
* Shunt Voltage Register
If PGA = 8, and regval = 1000 0011 0000 0000, then the decimal value must
be -32000, but the value calculated by the driver will be 33536.
* Shunt Limit Register
If regval = 1000 0011 0000 0000, then the decimal value must be -32000, but
the value calculated by the driver will be 768, if PGA = 1.
Fix sign bit index, and also correct misleading comment describing the
tmp51x_get_pga_shift function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-2-m.masimov@maxima.ru
[groeck: Fixed description and multi-line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Three small fixes for the soc tree:
- devicetee fix for the Arm Juno reference machine, to allow more
interesting PCI configurations
- build fix for SCMI firmware on the NXP i.MX platform
- fix for a race condition in Arm FF-A firmware"
* tag 'soc-fixes-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: fvp: Update PCIe bus-range property
firmware: arm_ffa: Fix the race around setting ffa_dev->properties
firmware: arm_scmi: Fix i.MX build dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FE910C04 rmnet compositions
USB: serial: option: add MediaTek T7XX compositions
USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready
USB: serial: option: add MeiG Smart SLM770A
USB: serial: option: add TCL IK512 MBIM & ECM
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI Host
========
- Fix the MHI BAR mapping by passing BAR number to pcim_iomap_region() API
instead of BAR mask. This fixes a regression for Qualcomm MHI modems.
* tag 'mhi-fixes-for-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: fix MHI BAR mapping
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs
A number of these were from an audit by Javier Carrasco of places
we may leak stack data via holes in structures passed to userspace that
were not explicitly zeroed. Very helpful effort after we found a similar
bug in review of new code.
This affected:
- dummy driver
- kionix,kmx61
- murrata,zpa2326
- rockchip,saradc
- rohm,bh1745
- veml,vcnl4035
- ti,ads1119
- ti,ads8688
- ti,tmp0006
Other fixes:
core,inkern
- Underflow fo reference count issue in error path of iio_channel_get_all()
for devices we haven't yet gotten.
tests
- Kconfig typo fix so it's possible to tell what test is being enabled.
- Check for allocation failures.
adi,ad4695
- Ensure timing requirement wrt to final clock edge vs next conversion
signal are met by adding an additional SPI transfer.
adi,ad7124
- Ensure channels are disabled at probe to avoid wrong data if channel 0
is not the first one read.
adi,ad7173
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9467
- Fix handing of multiple devices by not editing a single static
structure and instead making a per instance copy.
adi,ad9832
- Off by one error on input verification for phase control
adi,ad9834
- Off by one error on input verification for phase control.
atmel,at91
- In an error path don't use a variable that hasn't been initialized yet.
invensense,icm42600
- SPI burst write does not work for some icm426000 chips, disable it.
- Ensure correct handling of timestamps after resume.
st,sensors
- Add back accidentally dropped IIS2MDC compatible in binding doc.
st,stm32-dfsdm:
- label property was accidentally made a required property. Make it optional
again to fix use of older DT.
ti,ads1119
- Use a fixed size for the channel data rather than an integer, bringing
the code inline with the advertised 16 bit channel size and avoiding
userspace misinterpreting the data.
ti,ads124s08
- Use _cansleep gpio calls as no reason to prevent sleeping and it
was stopping a new board design working (trivial fix).
ti,ads1298
- Add a check on failure of devm_kasprintf()
* tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
iio: adc: ti-ads1298: Add NULL check in ads1298_init
iio: adc: stm32-dfsdm: handle label as an optional property
iio: adc: ad4695: fix buffered read, single sample timings
...
|
|
Add a mechanism with which the status of PCI error recovery runs
is reported to the platform. Together with the status supply additional
information that may aid in problem determination.
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Driver currently populates subsystem_device id in the
"hw_ver" field of ib_attr structure in query_device.
Updated to populate PCI revision ID.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Preethi G <preethi.gurusiddalingeswaraswamy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Current driver implementation doesn't populate the port_num
field in query_qp. Adding the code to convert internal firmware
port id to ibv defined port number and export it.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Firmware expects "min_rnr_timer" as a mandatory attribute in
MODIFY_QP command during the RTR-RTS transition. This needs
to be enforced by the driver which is missing while setting
bnxt_set_mandatory_attributes that sends these flags as part
of modify_qp optimization.
Fixes: 82c32d219272 ("RDMA/bnxt_re: Add support for optimized modify QP")
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When RDMA app configures path MTU, add a check in modify_qp verb
to make sure that it doesn't go beyond interface MTU. If this
check fails, driver will fail the modify_qp verb.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The check for 9060 condition should only be made for legacy chips.
Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241211083931.968831-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it.
Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early")
Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
|
|
When USB-C monitor is connected directly to Intel Barlow Ridge host, it
goes into "redrive" mode that basically routes the DisplayPort signals
directly from the GPU to the USB-C monitor without any tunneling needed.
However, the host router must be powered on for this to work. Aaron
reported that there are a couple of cases where this will not work with
the current code:
- Booting with USB-C monitor plugged in.
- Plugging in USB-C monitor when the host router is in sleep state
(runtime suspended).
- Plugging in USB-C device while the system is in system sleep state.
In all these cases once the host router is runtime suspended the picture
on the connected USB-C display disappears too. This is certainly not
what the user expected.
For this reason improve the redrive mode handling to keep the host
router from runtime suspending when detect that any of the above cases
is happening.
Fixes: a75e0684efe5 ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode")
Reported-by: Aaron Rainbolt <arainbolt@kfocus.org>
Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
|
|
The existing linked list based implementation of how ts tags are
assigned and managed is unsafe against concurrency and corner cases:
- element addition in tx processing can race against element removal
in ts queue completion,
- element removal in ts queue completion can race against element
removal in device close,
- if a large number of frames gets added to tx queue without ts queue
completions in between, elements with duplicate tag values can get
added.
Use a different implementation, based on per-port used tags bitmaps and
saved skb arrays.
Safety for addition in tx processing vs removal in ts completion is
provided by:
tag = find_first_zero_bit(...);
smp_mb();
<write rdev->ts_skb[tag]>
set_bit(...);
vs
<read rdev->ts_skb[tag]>
smp_mb();
clear_bit(...);
Safety for removal in ts completion vs removal in device close is
provided by using atomic read-and-clear for rdev->ts_skb[tag]:
ts_skb = xchg(&rdev->ts_skb[tag], NULL);
if (ts_skb)
<handle it>
Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some calls into ionic_get_module_eeprom() don't use a single
full buffer size, but instead multiple calls with an offset.
Teach our driver to use the offset correctly so we can
respond appropriately to the caller.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are some FW error handling paths that can cause us to
try to destroy the workqueue more than once, so let's be sure
we're checking for that.
The case where this popped up was in an AER event where the
handlers got called in such a way that ionic_reset_prepare()
and thus ionic_dev_teardown() got called twice in a row.
The second time through the workqueue was already destroyed,
and destroy_workqueue() choked on the bad wq pointer.
We didn't hit this in AER handler testing before because at
that time we weren't using a private workqueue. Later we
replaced the use of the system workqueue with our own private
workqueue but hadn't rerun the AER handler testing since then.
Fixes: 9e25450da700 ("ionic: add private workqueue per-device")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered.
Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If either a zero count or a large one is provided, kernel can crash.
Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters")
Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following typos:
'Alocate' ==> 'Allocate',
'specifed' ==> 'specified',
'Technlogy' ==> 'Technology',
'Brnach' ==> 'Branch',
'branchs' ==> 'branches'.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240930074023.618110-1-yanzhen@vivo.com
|
|
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead.
Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for some reported issues.
Included in here are:
- typec driver bugfixes
- u_serial gadget driver bugfix for much reported and discussed issue
- dwc2 bugfixes
- midi gadget driver bugfix
- ehci-hcd driver bugfix
- other small bugfixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix connector status writing past buffer size
usb: typec: ucsi: Fix completion notifications
usb: dwc2: Fix HCD port connection race
usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature
usb: dwc2: Fix HCD resume
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support
usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode
usb: core: hcd: only check primary hcd skip_phy_initialization
usb: gadget: midi2: Fix interpretation of is_midi1 bits
usb: dwc3: imx8mp: fix software node kernel dump
usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()
usb: typec: anx7411: fix fwnode_handle reference leak
usb: host: max3421-hcd: Correctly abort a USB request.
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
usb: ehci-hcd: fix call balance of clocks handling routines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two small serial driver fixes for 6.13-rc3. They are:
- ioport build fallout fix for the 8250 port driver that should
resolve Guenter's runtime problems
- sh-sci driver bugfix for a reported problem
Both of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: Work around warning backtrace in serial8250_set_defaults
serial: sh-sci: Check if TX data was written to device in .tx_empty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging gpib driver build and bugfixes for issues
that have been much-reported (should finally fix Guenter's build
issues). There are more of these coming in later -rc releases, but for
now this should fix the majority of the reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix i386 build issue
staging: gpib: Fix faulty workaround for assignment in if
staging: gpib: Workaround for ppc build failure
staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in rsassa-pkcs1 as well as a buffer overrun in
hisilicon/debugfs"
* tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem
crypto: rsassa-pkcs1 - Copy source data for SG list
|
|
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Set bindgen's Rust target version to prevent issues when
pairing older rustc releases with newer bindgen releases,
such as bindgen >= 0.71.0 and rustc < 1.82 due to
unsafe_extern_blocks.
drm/panic:
- Remove spurious empty line detected by a new Clippy warning"
* tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux:
rust: kbuild: set `bindgen`'s Rust target version
drm/panic: remove spurious empty line to clean warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Per-domain device-list locking fixes for the AMD IOMMU driver
- Fix incorrect use of smp_processor_id() in the NVidia-specific part
of the ARM-SMMU-v3 driver
- Intel IOMMU driver fixes:
- Remove cache tags before disabling ATS
- Avoid draining PRQ in sva mm release path
- Fix qi_batch NULL pointer with nested parent domain
* tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Avoid draining PRQ in sva mm release path
iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain
iommu/vt-d: Remove cache tags before disabling ATS
iommu/amd: Add lockdep asserts for domain->dev_list
iommu/amd: Put list_add/del(dev_data) back under the domain->lock
iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix an OF node reference leak in the sata_highbank driver
* tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
|
|
syzbot reported the following crash [1]
Issue came with the blamed commit. Instead of going through
all the iov components, we keep using the first one
and end up with a malformed skb.
[1]
kernel BUG at net/core/skbuff.c:2849 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024
RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848
Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293
RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00
RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000
RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c
R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50
R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80
FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284
tipc_aead_decrypt net/tipc/crypto.c:894 [inline]
tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844
tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109
tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668
__netif_receive_skb_list_ptype net/core/dev.c:5720 [inline]
__netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762
__netif_receive_skb_list net/core/dev.c:5814 [inline]
netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905
gro_normal_list include/net/gro.h:515 [inline]
napi_complete_done+0x2b5/0x870 net/core/dev.c:6256
napi_complete include/linux/netdevice.h:567 [inline]
tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057
do_iter_readv_writev+0x600/0x880
vfs_writev+0x376/0xba0 fs/read_write.c:1050
do_writev+0x1b6/0x360 fs/read_write.c:1096
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper")
Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fairly small fixes for v6.13, the most substatial one being
disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA
platforms since it doesn't work"
* tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.
spi: rockchip: Fix PM runtime count on no-op cs
spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of additional changes, one ensuring we give AXP717 enough
time to stabilise after changing voltages which fixes serious
stability issues on some platforms and another documenting the DT
support required for the Qualcomm WCN6750"
* tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: axp20x: AXP717: set ramp_delay
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
|
