summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-11-30zram: fix unbalanced idr management at hot removalTakashi Iwai
The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd98578 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: David Disseldorp <ddiss@suse.de> Reported-by: David Disseldorp <ddiss@suse.de> Tested-by: David Disseldorp <ddiss@suse.de> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01Merge tag 'drm-misc-fixes-2016-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes single drm fix. * tag 'drm-misc-fixes-2016-11-30' of git://anongit.freedesktop.org/git/drm-misc: drm: Don't call drm_for_each_crtc with a non-KMS driver
2016-12-01Merge tag 'tilcdc-4.10' of https://github.com/jsarha/linux into drm-nextDave Airlie
tilcdc changes for v4.10 * tag 'tilcdc-4.10' of https://github.com/jsarha/linux: (23 commits) drm/tilcdc: fix parsing of some DT properties drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1 drm/tilcdc: Configure video mode to HW in enable() not in mode_set_nofb() drm/tilcdc: Load palette at the end of mode_set_nofb() drm/tilcdc: Add timeout wait for palette loading to complete drm/tilcdc: Enable palette loading for revision 2 LCDC too drm/tilcdc: Fix load mode bit-field setting in tilcdc_crtc_enable() drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.h drm/tilcdc: Fix tilcdc_crtc_create() return value handling drm/tilcdc: implement palette loading for rev1 drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDC drm/tilcdc: Add drm bridge support for attaching drm bridge drivers drm/bridge: Add ti-tfp410 DVI transmitter driver dt-bindings: Move "ti,tfp410.txt" from display/ti to display/bridge drm/tilcdc: Recover from sync lost error flood by resetting the LCDC drm/tilcdc: Fix race from forced shutdown of crtc in unload drm/tilcdc: Use unload to handle initialization failures drm/tilcdc: Stop using struct drm_driver load() callback drm/tilcdc: Remove obsolete drm_connector_register() calls drm/tilcdc: Correct misspelling in error message ...
2016-12-01Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into ↵Dave Airlie
drm-next On the userspace side, all the basics are working, and most of glmark2 is working. I've been working through deqp, and I've got a couple more things to fix (but we've gone from 70% to 80+% pass in last day, and current deqp run that is going should pick up another 5-10%). I expect to push the mesa patches today or tomorrow. There are a couple more a5xx related patches to take the gpu out of secure mode (for the devices that come up in secure mode, like the hw I have), but those depend on an scm patch that would come in through another tree. If that can land in the next day or two, there might be a second late pull request for drm/msm. In addition to the new-shiny, there have also been a lot of overlay/ plane related fixes for issues found using drm-hwc2 (in the process of testing/debugging the atomic/kms fence patches), resulting in rework to assign hwpipes to kms planes dynamically (as part of global atomic state) and also handling SMP (fifo) block allocation atomically as part of the ->atomic_check() step. All those patches should also help out atomic weston (when those patches eventually land). * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (36 commits) drm/msm: gpu: Add support for the GPMU drm/msm: gpu: Add A5XX target support drm/msm: Disable interrupts during init drm/msm: Remove 'src_clk' from adreno configuration drm/msm: gpu: Add OUT_TYPE4 and OUT_TYPE7 drm/msm: Add adreno_gpu_write64() drm/msm: gpu Add new gpu register read/write functions drm/msm: gpu: Return error on hw_init failure drm/msm: gpu: Cut down the list of "generic" registers to the ones we use drm/msm: update generated headers drm/msm/adreno: move scratch register dumping to per-gen code drm/msm/rd: support for 64b iova drm/msm: convert iova to 64b drm/msm: set dma_mask properly drm/msm: Remove bad calls to of_node_put() drm/msm/mdp5: move LM bounds check into plane->atomic_check() drm/msm/mdp5: dump smp state on errors too drm/msm/mdp5: add debugfs to show smp block status drm/msm/mdp5: handle SMP block allocations "atomically" drm/msm/mdp5: dynamically assign hw pipes to planes ...
2016-11-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two small fixes for MIPI PLLs on sunxi devices and a build fix for a Broadcom clk driver having unmet dependencies" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it
2016-11-30powercap / RAPL: Add Knights Mill CPUIDPiotr Luc
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_rapl Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30ACPI / CPPC: set an error code on probe error pathDan Carpenter
We should return -EINVAL (instead of 0) if get_cpu_device() fails. Fixes: 158c998ea44b (ACPI / CPPC: add sysfs support to compute delivered performance) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30cpufreq: dt: Add support for zx296718Baoyou Xie
Add the compatible string for supporting the generic cpufreq driver on the ZTE's zx296718 SoC. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / OPP: Pass opp_table to dev_pm_opp_put_regulator()Stephen Boyd
Joonyoung Shim reported an interesting problem on his ARM octa-core Odoroid-XU3 platform. During system suspend, dev_pm_opp_put_regulator() was failing for a struct device for which dev_pm_opp_set_regulator() is called earlier. This happened because an earlier call to dev_pm_opp_of_cpumask_remove_table() function (from cpufreq-dt.c file) removed all the entries from opp_table->dev_list apart from the last CPU device in the cpumask of CPUs sharing the OPP. But both dev_pm_opp_set_regulator() and dev_pm_opp_put_regulator() routines get CPU device for the first CPU in the cpumask. And so the OPP core failed to find the OPP table for the struct device. This patch attempts to fix this problem by returning a pointer to the opp_table from dev_pm_opp_set_regulator() and using that as the parameter to dev_pm_opp_put_regulator(). This ensures that the dev_pm_opp_put_regulator() doesn't fail to find the opp table. Note that similar design problem also exists with other dev_pm_opp_put_*() APIs, but those aren't used currently by anyone and so we don't need to update them for now. Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Reported-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [ Viresh: Wrote commit log and tested on exynos 5250 ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / Domains: Do not print PM domain add error message if EPROBE_DEFERGeert Uytterhoeven
EPROBE_DEFER is not an error, hence printing an error message like renesas_irqc e61c0000.interrupt-controller: failed to add to PM domain always-on: -517 may confuse the user. Suppress the error message in case of EPROBE_DEFER to fix this. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / QoS: Export dev_pm_qos_update_user_latency_toleranceAndrew Lutomirski
nvme wants a module parameter that overrides the default latency tolerance. This makes it easy for nvme to reflect that default in sysfs. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / QoS: Fix writing 'auto' to pm_qos_latency_tolerance_usAndrew Lutomirski
If it was already 'auto', then writing 'auto' again would incorrectly fail. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30PM / QoS: Improve sysfs pm_qos_latency_tolerance validationAndrew Lutomirski
Negative values are special. Don't let users write them directly. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30macvtap: handle ubuf refcount correctly when meet errorsJason Wang
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30tun: handle ubuf refcount correctly when meet errorsJason Wang
We trigger uarg->callback() immediately after we decide do datacopy even if caller want to do zerocopy. This will cause the callback (vhost_net_zerocopy_callback) decrease the refcount. But when we meet an error afterwards, the error handling in vhost handle_tx() will try to decrease it again. This is wrong and fix this by delay the uarg->callback() until we're sure there's no errors. Reported-by: wangyunjian <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30driver: ipvlan: Remove useless member mtu_adj of struct ipvl_devGao Feng
The mtu_adj is initialized to zero when alloc mem, there is no any assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one right value. So it is useless member of struct ipvl_dev, then remove it. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during resumeGrygorii Strashko
netif_set_real_num_tx/rx_queues() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_resume() |- cpsw_ndo_open() |- netif_set_real_num_tx/rx_queues() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_open() by rtnl_lock/unlock() calls. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: commit e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Tested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30ethernet :mellanox :mlx5: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder
In alloc_cmd_box(), pci_pool_alloc() followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30ethernet :mellanox :mlx4: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder
In mlx4_alloc_cmd_mailbox(), pci_pool_alloc() followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30Merge tag 'pwm/for-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "This contains two one-line fixes for issues that were introduced in v4.9-rc1" * tag 'pwm/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix device reference leak pwm: meson: Add missing spin_lock_init()
2016-11-30net: ethernet: ti: cpsw: split tx budget according between channelsIvan Khoronzhuk
Split device budget between channels according to channel rate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: optimize end of poll cycleIvan Khoronzhuk
Check budget fullness only after it's updated and update channel mask only once to keep budget balance between channels. It's also needed for farther changes. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: cpsw: add .ndo to set per-queue rateIvan Khoronzhuk
This patch allows to rate limit queues tx queues for cpsw interface. The rate is set in absolute Mb/s units and cannot be more a speed an interface is connected with. The rate for a tx queue can be tested with: ethtool -L eth0 rx 4 tx 4 echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate tc qdisc add dev eth0 root handle 1: multiq tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5001 0xffff action skbedit queue_mapping 0 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5002 0xffff action skbedit queue_mapping 1 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5003 0xffff action skbedit queue_mapping 2 tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip\ dport 5004 0xffff action skbedit queue_mapping 3 iperf -c 192.168.2.1 -b 110M -p 5001 -f m -t 60 iperf -c 192.168.2.1 -b 215M -p 5002 -f m -t 60 iperf -c 192.168.2.1 -b 55M -p 5003 -f m -t 60 iperf -c 192.168.2.1 -b 32M -p 5004 -f m -t 60 Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: davinci_cpdma: add set rate for a channelIvan Khoronzhuk
The cpdma has 8 rate limited tx channels. This patch adds ability for cpdma driver to use 8 tx h/w shapers. If at least one channel is not rate limited then it must have higher number, this is because the rate limited channels have to have higher priority then not rate limited channels. The channel priority is set in low-hi direction already, so that when a new channel is added with ethtool and it doesn't have rate yet, it cannot affect on rate limited channels. It can be useful for TSN streams and just in cases when h/w rate limited channels are needed. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: ethernet: ti: davinci_cpdma: add weight function for channelsIvan Khoronzhuk
The weight of a channel is needed to split descriptors between channels. The weight can depend on maximum rate of channels, maximum rate of an interface or other reasons. The channel weight is in percentage and is independent for rx and tx channels. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30Merge tag 'wireless-drivers-for-davem-2016-11-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.9 mwifiex * properly terminate SSIDs so that uninitalised memory is not printed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Add support for XDP_TXMintz, Yuval
Add support for forwarding via XDP. Once the eBPF is attached, driver would allocate & configure a designated transmission queue meant solely for forwarding packets. Said queue would share the receive-queue's interrupt line, and would have it's own Tx statistics. Infrastructure changes required for this [spread-out through the code]: - Determine the DMA direction of the receive buffers based on the presence of the eBPF program. - Turn the sw Tx ring into a union, as regular/XDP queues have different needs for releasing resources after completion [regular requires the SKB, XDP requires the transmitted page]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Add basic XDP supportMintz, Yuval
Add support for the ndo_xdp callback. This patch would support XDP_PASS, XDP_DROP and XDP_ABORTED commands. This also adds a per Rx queue statistic which counts number of packets which didn't reach the stack [due to XDP]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Better utilize the qede_[rt]x_queueMintz, Yuval
Improve the cacheline usage of both queues by reordering - This reduces the cachelines required for egress datapath processing from 3 to 2 and those required by ingress datapath processing by 2. It also changes a couple of datapath related functions that currently require either the fastpath or the qede_dev, changing them to be based on the tx/rx queue instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Don't check netdevice for rx-hashMintz, Yuval
Receive-hashing is a fixed feature, so there's no need to check during the ingress datapath whether it's set or not. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qed*: Handle-based L2-queues.Mintz, Yuval
The driver needs to maintain several FW/HW-indices for each one of its queues. Currently, that mapping is done by the QED where it uses an rx/tx array of so-called hw-cids, populating them whenever a new queue is opened and clearing them upon destruction of said queues. This maintenance is far from ideal - there's no real reason why QED needs to maintain such a data-structure. It becomes even worse when considering the fact that the PF's queues and its child VFs' queues are all mapped into the same data-structure. As a by-product, the set of parameters an interface needs to supply for queue APIs is non-trivial, and some of the variables in the API structures have different meaning depending on their exact place in the configuration flow. This patch re-organizes the way L2 queues are configured and maintained. In short: - Required parameters for queue init are now well-defined. - Qed would allocate a queue-cid based on parameters. Upon initialization success, it would return a handle to caller. - Queue-handle would be maintained by entity requesting queue-init, not necessarily qed. - All further queue-APIs [update, destroy] would use the opaque handle as reference for the queue instead of various indices. The possible owners of such handles: - PF queues [qede] - complete handles based on provided configuration. - VF queues [qede] - fw-context-less handles, containing only relative information; Only the PF-side would need the absolute indices for configuration, so they're omitted here. - VF queues [qed, PF-side] - complete handles based on VF initialization. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Revise state locking schemeMintz, Yuval
As qede utilizes an internal-reload sequence as result of various configuration changes, the netif state wouldn't always accurately describe the status of the configuration. To compensate, we're storing an internal state of the device, which should only be accessed under the qede_lock. This patch fixes and improves several state/lock interactions: - The internal state should only be checked while locked. - While holding lock, it's preferable to check state rather than the netdevice's state. - The reload sequence is not 'atomic' - unload and subsequent load are not in the same critical section. This also add the 'locked' variant for the reload, which would later be used by XDP - useful in the case where the correct sequence is 'lock, check state and re-configure if good', instead of allowing the reload itself to make the decision regarding the configurability of the device. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Refactor data-path Rx flowMintz, Yuval
Driver's NAPI poll is using a long sequence for processing ingress packets, and it's going to get even longer once we do XDP. Break down the main loop into a series of sub-functions to allow better readability of the function. While we're at it, correct the accounting of the NAPI budget - currently we're counting only packets passed to the stack against the budget, even in case those are actually aggregations. After refactoring every CQE processed would be counted against the budget. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Refactor statistics gatheringMintz, Yuval
Refactor logic for gathering statistics into a per-queue function. This improves readability of the driver statistics' flows. In addition, this would be required by the XDP forwarding queues [as we'll need the Txq statistics gathering methods for those as well]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Remove 'num_tc'.Mintz, Yuval
Driver currently doesn't support multi-CoS, but it contains logic where multiple transmission queues could be theoretically manipulated. No point in maintaining the infrastructure at the moment. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qed: Optimize qed_chain datapath usageMintz, Yuval
The chain structure and functions are widely used by the qed* modules, both for configuration and datapath. E.g., qede's Tx has one such chain and its Rx has two. Currently, the strucutre's fields which are required for datapath related functions [produce/consume] are intertwined with fields which are required only for configuration purposes [init/destroy/etc.]. This patch re-arranges the chain structure so that all the fields which are required for datapath usage could reside in a single cacheline instead of the two which are required today. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Optimize aggregation information sizeMintz, Yuval
Driver needs to maintain a structure per-each concurrent possible open aggregation, but the structure storing that metadata is far from being optimized - biggest waste in it is that there are 2 buffer metadata, one for a replacement buffer when the aggregation begins and the other for holding the first aggregation's buffer after it begins [as firmware might still update it]. Those 2 can safely be united into a single metadata structure. struct qede_agg_info changes the following: /* size: 120, cachelines: 2, members: 9 */ /* sum members: 114, holes: 1, sum holes: 4 */ /* padding: 2 */ /* paddings: 2, sum paddings: 8 */ /* last cacheline: 56 bytes */ --> /* size: 48, cachelines: 1, members: 9 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 48 bytes */ Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30ehea: Remove unnecessary memset of stats in netdev private dataTobias Klauser
The memory for netdev private data is allocated using kzalloc/vzalloc in alloc_netdev_mqs, thus there is no need to zero the stats portion of it again in the driver's probe function. In any case, the size for the memset is wrong as the stats member is of type rtnl_link_stats64, not net_device_stats. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30cxgb4: Add PCI device ID for new adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30spi: fsl-espi: remove unused linearization codeHeiner Kallweit
After introducing direct transfers between hardware and transfer buffers remove all code which is unused now. This includes getting rid of the 64k linearization buffer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: eliminate need for linearization when reading from hardwareHeiner Kallweit
Eliminate need for linearization when reading from the hardware and write to the transfer buffers directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: eliminate need for linearization when writing to hardwareHeiner Kallweit
Eliminate need for linearization when writing to the hardware and read from the transfer buffers directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-espi: determine need for byte swap only onceHeiner Kallweit
Determine need for byte swap only once and store it in new member swab in struct fsl_espi. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-lpspi: read lpspi tx/rx fifo size in probe()Gao Pan
The lpspi tx/rx fifo size is a read only parameter resides lpspi Parameter Register. It's better to read lpspi tx/rx fifo size in probe(). Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30spi: fsl-lpspi: use wait_for_completion_timeout() while waiting transfer doneGao Pan
It's a potential problem to use wait_for_completion() because the completion condition may never come. Thus, it's better to repalce wait_for_completion() with wait_for_completion_timeout(). Signed-off-by: Gao Pan <pandy.gao@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30net: fec: cache statistics while device is downNikita Yushchenko
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid board: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200 pgd = ddecc000 [e0898200] *pgd=9e406811, *pte=400d1653, *ppte=400d1453 Internal error: : 1008 [#1] SMP ARM ... Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec registers while IPG clock is stopped by PM. Fix that by caching statistics in fec_enet_private. Cache is initialized at device probe time, and updated at statistics request time if device is up, and also just before turning device off on down path. Additional locking is not needed, since cached statistics is accessed either before device is registered, or under rtnl_lock(). Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30regulator: core: Correct type of mode in regulator_mode_constrainCharles Keepax
Every function handling the mode within the regulator core uses an unsigned int for mode, except for regulator_mode_constrain. This patch changes the type of mode within regulator_mode_constrain which fixes several instances where we are passing pointers to unsigned ints then treating them as an int within this function. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30macvtap: replace printk with netdev_errZhang Shengju
This patch replaces printk() with netdev_err() for macvtap device. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30vxlan: fix a potential issue when create a new vxlan fdb entry.Haishuang Yan
vxlan_fdb_append may return error, so add the proper check, otherwise it will cause memory leak. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Changes in v2: - Unnecessary to initialize rc to zero. Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30spi: orion: fix comment to mention MVEBUUwe Kleine-König
MVEBU chips (Armada XP, Armada 370 and others) are supported by this driver. Mention this in the help text to make more obvious what is already specified in the dependencies of this symbol. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-01 14:06:28 +0000