summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-06-25clocksource/drivers/tegra: Restore timer rate on Tegra210Dmitry Osipenko
The clocksource rate is initialized only for the first per-CPU clocksource and then that rate shall be replicated for the rest of clocksource's because they are initialized manually in the code. Fixes: 3be2a85a0b61 ("clocksource/drivers/tegra: Support per-CPU timers on all Tegra's") Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/arm_arch_timer: Extract elf_hwcap use to arch-helperAndrew Murray
Different mechanisms are used to test and set elf_hwcaps between ARM and ARM64, this results in the use of ifdeferry in this file when setting/testing for the EVTSTRM hwcap. Let's improve readability by extracting this to an arch helper. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/sysctr: Add nxp system counter timer driver supportBai Ping
The system counter (sys_ctr) is a programmable system counter which provides a shared time base to the Cortex A15, A7, A53 etc cores. It is intended for use in applications where the counter is always powered on and supports multiple, unrelated clocks. The sys_ctr hardware supports: - 56-bit counter width (roll-over time greater than 40 years) - compare frame(64-bit compare value) contains programmable interrupt generation when compare value <= counter value. [dlezcano] Fixed over 80 chars length warning Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Rename timer-tegra20.c to timer-tegra.cDmitry Osipenko
Rename driver's source file to better reflect that it's not specific to older SoC generations. Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Lower clocksource rating for some Tegra'sDmitry Osipenko
Arch-timer is more preferable for a range of Tegra SoC generations as it has higher precision and is not affect by any kind of problems. Pointed-out-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Support COMPILE_TEST universallyDmitry Osipenko
Remove build dependency on ARM for compile-testing to allow non-arch specific build-bots (like Intel's test robot) to compile the driver and report about problems. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Minor code clean upDmitry Osipenko
Correct typo and use proper upper casing for acronyms in the comments, use common style for error messages, prepend error messages with "tegra-timer:", add error message for cpuhp_setup_state() failure and clean up whitespaces in the code to fix checkpatch warnings. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Release all IRQ's on request_irq() errorDmitry Osipenko
Release all requested IRQ's on the request error to properly clean up allocated resources. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Replace readl/writel with relaxed versionsDmitry Osipenko
The readl/writel functions are inserting memory barrier to ensure that outstanding memory writes are completed, this results in L2 cache syncing being done on Tegra20 and Tegra30 which isn't a very cheap operation. Replace all readl/writel occurrences in the code with the relaxed versions since there is no need for the memory-access syncing. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Reset hardware state on initDmitry Osipenko
Reset timer's hardware state to ensure that initially it is in a predictable state. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Unify timer codeDmitry Osipenko
Tegra132 is 64bit platform and it has the tegra20-timer hardware unit. Right now the corresponding timer code isn't compiled for ARM64, remove ifdef'iness from the code and compile tegra20-timer for both 32 and 64 bit platforms. Also note that like the older generations, Tegra210 has the microseconds counter, hence the timer_us clocksource is now made available for Tegra210 as well. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/tegra: Support per-CPU timers on all Tegra'sDmitry Osipenko
Assign TMR1-4 per-CPU core on 32bit Tegra's in a way it is done for Tegra210. In a result each core can handle its own timer events, less code is unique to ARM64 and Tegra's clock events driver now has higher rating on all Tegra's, replacing the ARM's TWD timer which isn't very accurate due to the clock rate jitter caused by CPU frequency scaling. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/exynos_mct: Increase priority over ARM arch timerMarek Szyprowski
Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT (Multi Core Timer) and standard ARM Architected Timers. There are use cases, where both timer interfaces are used simultanously. One of such examples is using Exynos MCT for the main system timer and ARM Architected Timers for the KVM and virtualized guests (KVM requires arch timers). Exynos Multi-Core Timer driver (exynos_mct) must be however started before ARM Architected Timers (arch_timer), because they both share some common hardware blocks (global system counter) and turning on MCT is needed to get ARM Architected Timer working properly. To ensure selecting Exynos MCT as the main system timer, increase MCT timer rating. To ensure proper starting order of both timers during suspend/resume cycle, increase MCT hotplug priority over ARM Archictected Timers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/arc_timer: Use BIT() instead of _BITUL()Masahiro Yamada
This is in-kernel C code, so there is no reason to use _BITUL(). Replace it with equivalent BIT(). I added #include <linux/bits.h> explicitly although it has been included by other headers eventually. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/ixp4xx: Implement delay timerLinus Walleij
This adds delay timer functionality to the IXP4xx timer driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25clocksource/drivers/timer-meson6: Update with SPDX Licence identifierNeil Armstrong
Comply with the licensing rules defined in the documentation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-25dm init: remove trailing newline from calls to DMERR() and DMINFO()Stephen Boyd
These printing macros already add a trailing newline, so having another one here just makes for blank lines when these prints are enabled. Remove these needless newlines. Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm init: fix incorrect uses of kstrndup()Gen Zhang
Fix 2 kstrndup() calls with incorrect argument order. Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org # v5.1 Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25gpio: Fix return value mismatch of function gpiod_get_from_of_node()Waibel Georg
In case the requested gpio property is not found in the device tree, some callers of gpiod_get_from_of_node() expect a return value of NULL, others expect -ENOENT. In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT. Currently it gets a NULL, which breaks the loop that tries all gpio_suffixes. The result is that a gpio property is not found, even though it is there. This patch changes gpiod_get_from_of_node() to return -ENOENT instead of NULL when the requested gpio property is not found in the device tree. Additionally it modifies all calling functions to properly evaluate the return value. Another approach would be to leave the return value of gpiod_get_from_of_node() as is and fix the bug in devm_fwnode_get_index_gpiod_from_child(). Other callers would still need to be reworked. The effort would be the same as with the chosen solution. Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25pinctrl: ocelot: fix pinmuxing for pins after 31Alexandre Belloni
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pinctrl: ocelot: fix gpio direction for pins after 31Alexandre Belloni
The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25pwm: jz4740: Apply configuration atomicallyPaul Cercueil
This is cleaner, more future-proof, and incidentally it also fixes the PWM resetting its config when stopped/started several times. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Remove unused devicetree compatible stringsPaul Cercueil
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Fix the G12A AO clock parents orderNeil Armstrong
The Amlogic G12A and G12B Documentation is wrong, the AO xtal and clk81 clock source order is reversed, and validated when adding DVFS support by using the PWM AO D output to control the CPU supply voltage. The vendor tree also uses the reversed xtal and clk81 order at [1]. [1] https://github.com/hardkernel/linux/blob/odroidn2-4.9.y/drivers/amlogic/pwm/pwm_meson.c#L462 Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Update with SPDX Licence identifierNeil Armstrong
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32: Use 3 cells ->of_xlate()Fabrice Gasnier
STM32 Timers support generic 3 cells PWM to encode PWM number, period and polarity. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: Add consumer device linkFabrice Gasnier
Add a device link between the PWM consumer and the PWM provider. This enforces the PWM user to get suspended before the PWM provider. It allows proper synchronization of suspend/resume sequences: the PWM user is responsible for properly stopping PWM, before the provider gets suspended: see [1]. Add the device link in: - of_pwm_get() - pwm_get() - devm_*pwm_get() variants as it requires a reference to the device for the PWM consumer. [1] https://lkml.org/lkml/2019/2/5/770 Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32-lp: Add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence. Only perform a check here, and handle the pinctrl states. See [1]. [1] https://lkml.org/lkml/2019/2/5/770 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add a driver for SiFive SoC PWMYash Shah
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25iommu/io-pgtable: Support non-coherent page tablesBjorn Andersson
Describe the memory related to page table walks as non-cacheable for iommu instances that are not DMA coherent. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [will: Use cfg->coherent_walk, fix arm-v7s, ensure outer-shareable for NC] Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call orderPhil Reid
Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flagWill Deacon
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just an indication of whether or not the page-table walker for the IOMMU is coherent with the CPU caches. Since cache coherency is more than just a quirk, replace the flag with its own field in the io_pgtable_cfg structure. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25regulator: core: Expose some of core functions needed by couplersDmitry Osipenko
Expose some of internal functions that are required for implementation of customized regulator couplers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25regulator: core: Introduce API for regulators coupling customizationDmitry Osipenko
Right now regulator core supports only one type of regulators coupling, the "voltage max-spread" which keeps voltages of coupled regulators in a given range from each other. A more sophisticated coupling may be required in practice, one example is the NVIDIA Tegra SoCs which besides the max-spreading have other restrictions that must be adhered. Introduce API that allow platforms to provide their own customized coupling algorithms. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24tpm: Don't duplicate events from the final event log in the TCG2 logMatthew Garrett
After the first call to GetEventLog() on UEFI systems using the TCG2 crypto agile log format, any further log events (other than those triggered by ExitBootServices()) will be logged in both the main log and also in the Final Events Log. While the kernel only calls GetEventLog() immediately before ExitBootServices(), we can't control whether earlier parts of the boot process have done so. This will result in log entries that exist in both logs, and so the current approach of simply appending the Final Event Log to the main log will result in events being duplicated. We can avoid this problem by looking at the size of the Final Event Log just before we call ExitBootServices() and exporting this to the main kernel. The kernel can then skip over all events that occured before ExitBootServices() and only append events that were not also logged to the main log. Signed-off-by: Matthew Garrett <mjg59@google.com> Reported-by: Joe Richey <joerichey@google.com> Suggested-by: Joe Richey <joerichey@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24Abstract out support for locating an EFI config tableMatthew Garrett
We want to grab a pointer to the TPM final events table, so abstract out the existing code for finding an FDT table and make it generic. Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operationsVadim Sukhomlinov
TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling future TPM operations. TPM 1.2 behavior was different, future TPM operations weren't disabled, causing rare issues. This patch ensures that future TPM operations are disabled. Fixes: d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.") Cc: stable@vger.kernel.org Signed-off-by: Vadim Sukhomlinov <sukhomlinov@google.com> [dianders: resolved merge conflicts with mainline] Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24efi: Attempt to get the TCG2 event log in the boot stubMatthew Garrett
Right now we only attempt to obtain the SHA1-only event log. The protocol also supports a crypto agile log format, which contains digests for all algorithms in use. Attempt to obtain this first, and fall back to obtaining the older format if the system doesn't support it. This is lightly complicated by the event sizes being variable (as we don't know in advance which algorithms are in use), and the interface giving us back a pointer to the start of the final entry rather than a pointer to the end of the log - as a result, we need to parse the final entry to figure out its length in order to know how much data to copy up to the OS. Signed-off-by: Matthew Garrett <mjg59@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Append the final event log to the TPM event logMatthew Garrett
Any events that are logged after GetEventsLog() is called are logged to the EFI Final Events table. These events are defined as being in the crypto agile log format, so we can just append them directly to the existing log if it's in the same format. In theory we can also construct old-style SHA1 log entries for devices that only return logs in that format, but EDK2 doesn't generate the final event log in that case so it doesn't seem worth it at the moment. Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Reserve the TPM final events tableMatthew Garrett
UEFI systems provide a boot services protocol for obtaining the TPM event log, but this is unusable after ExitBootServices() is called. Unfortunately ExitBootServices() itself triggers additional TPM events that then can't be obtained using this protocol. The platform provides a mechanism for the OS to obtain these events by recording them to a separate UEFI configuration table which the OS can then map. Unfortunately this table isn't self describing in terms of providing its length, so we need to parse the events inside it to figure out how long it is. Since the table isn't mapped at this point, we need to extend the length calculation function to be able to map the event as it goes along. (Fixes by Bartosz Szczepanek <bsz@semihalf.com>) Signed-off-by: Matthew Garrett <mjg59@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Abstract crypto agile event size calculationsMatthew Garrett
We need to calculate the size of crypto agile events in multiple locations, including in the EFI boot stub. The easiest way to do this is to put it in a header file as an inline and leave a wrapper to ensure we don't end up with multiple copies of it embedded in the existing code. Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24tpm: Actually fail on TPM errors during "get random"Kees Cook
A "get random" may fail with a TPM error, but those codes were returned as-is to the caller, which assumed the result was the number of bytes that had been written to the target buffer, which could lead to a kernel heap memory exposure and over-read. This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as before. [ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random [ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)! Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989 Reported-by: Phil Baker <baker1tex@gmail.com> Reported-by: Craig Robson <craig@zhatt.com> Fixes: 7aee9c52d7ac ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure") Cc: Laura Abbott <labbott@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-25Merge tag 'mfd-fixes-5.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd bugfix from Lee Jones. Fix stmfx type confusion between regmap_read() (which takes an "u32") and the bitmap operations (which take an "unsigned long" array). * tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: stmfx: Fix an endian bug in stmfx_irq_handler() mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
2019-06-24media: staging: media: tegra-vde: Defer dmabuf's unmappingDmitry Osipenko
Frequent IOMMU remappings take about 50% of CPU usage because there is quite a lot to remap. Defer dmabuf's unmapping by 5 seconds in order to mitigate the mapping overhead which goes away completely and driver works as fast as in a case of a disabled IOMMU. The case of a disabled IOMMU should also benefit a tad from the caching since CPU cache maintenance that happens on dmabuf's attaching takes some resources. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: staging: media: tegra-vde: Add IOMMU supportDmitry Osipenko
All Tegra's could provide memory isolation for the video decoder hardware using IOMMU, it is also required for Tegra30+ in order to handle sparse dmabuf's which GPU exports in a default kernel configuration. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: hdpvr: fix locking and a missing msleepHans Verkuil
This driver has three locking issues: - The wait_event_interruptible() condition calls hdpvr_get_next_buffer(dev) which uses a mutex, which is not allowed. Rewrite with list_empty_careful() that doesn't need locking. - In hdpvr_read() the call to hdpvr_stop_streaming() didn't lock io_mutex, but it should have since stop_streaming expects that. - In hdpvr_device_release() io_mutex was locked when calling flush_work(), but there it shouldn't take that mutex since the work done by flush_work() also wants to lock that mutex. There are also two other changes (suggested by Keith): - msecs_to_jiffies(4000); (a NOP) should have been msleep(4000). - Change v4l2_dbg to v4l2_info to always log if streaming had to be restarted. Reported-by: Keith Pyle <kpyle@austin.rr.com> Suggested-by: Keith Pyle <kpyle@austin.rr.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()Boris Brezillon
cfg->type can be overridden by v4l2_ctrl_fill() and the new value is stored in the local type var. Fix the tests to use this local var. Fixes: 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: atmel: atmel-isc: fix i386 build errorEugen Hristev
Changed module parameters to static. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: v4l2-ctrl: Move compound control initializationEzequiel Garcia
Rework std_init adding an explicit initialization for compound controls. While here, make sure the control is initialized to zero, before providing default values for all its fields. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: hantro: Use vb2_get_bufferEzequiel Garcia
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 15:43:04 +0000