| Age | Commit message (Collapse) | Author |
|---|
|
When a weak pull-up is present on the SDO line, regmap_update_bits fails
to write both the SOFTRESET and SDOACTIVE bits because it incorrectly
reads them as already set.
Since the soft reset disables the SDO line, performing a
read-modify-write operation on ADI_SPI_CONFIG_A to enable the SDO line
doesn't make sense. This change directly writes to the register instead
of using regmap_update_bits.
Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818")
Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Link: https://patch.msgid.link/SA1P110MB106904C961B0F3FAFFED74C0BCF5A@SA1P110MB1069.NAMP110.PROD.OUTLOOK.COM
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
be allocated
Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to
bail out if skb cannot be allocated.
Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Cc: stable@vger.kernel.org
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Link: https://patch.msgid.link/20250208-fix-rockchip-canfd-v1-1-ec533c8a9895@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it.
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-can/SY8P300MB0421E0013C0EBD2AA46BA709A1F42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250204154859.9797-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Pull drm fixes from Dave Airlie:
"Just regular drm fixes, amdgpu, xe and i915 mostly, but a few
scattered fixes. I think one of the i915 fixes fixes some build combos
that Guenter was seeing.
amdgpu:
- Add new tiling flag for DCC write compress disable
- Add BO metadata flag for DCC
- Fix potential out of bounds access in display
- Seamless boot fix
- CONFIG_FRAME_WARN fix
- PSR1 fix
xe:
- OA uAPI related fixes
- Fix SRIOV migration initialization
- Restore devcoredump to a sane state
i915:
- Fix the build error with clamp after WARN_ON on gcc 13.x+
- HDCP related fixes
- PMU fix zero delta busyness issue
- Fix page cleanup on DMA remap failure
- Drop 64bpp YUV formats from ICL+ SDR planes
- GuC log related fix
- DisplayPort related fixes
ivpu:
- Fix error handling
komeda:
- add return check
zynqmp:
- fix locking in DP code
ast:
- fix AST DP timeout
cec:
- fix broken CEC adapter check"
* tag 'drm-fixes-2025-02-08' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
drm/i915/dp: Fix potential infinite loop in 128b/132b SST
Revert "drm/amd/display: Use HW lock mgr for PSR1"
drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml files
accel/amdxdna: Add MODULE_FIRMWARE() declarations
drm/i915/dp: Iterate DSC BPP from high to low on all platforms
drm/xe: Fix and re-enable xe_print_blob_ascii85()
drm/xe/devcoredump: Move exec queue snapshot to Contexts section
drm/xe/oa: Set stream->pollin in xe_oa_buffer_check_unlocked
drm/xe/pf: Fix migration initialization
drm/xe/oa: Preserve oa_ctrl unused bits
drm/amd/display: Fix seamless boot sequence
drm/amd/display: Fix out-of-bound accesses
drm/amdgpu: add a BO metadata flag to disable write compression for Vulkan
drm/i915/backlight: Return immediately when scale() finds invalid parameters
drm/i915/dp: Return min bpc supported by source instead of 0
drm/i915/dp: fix the Adaptive sync Operation mode for SDP
drm/i915/guc: Debug print LRC state entries only if the context is pinned
drm/i915: Drop 64bpp YUV formats from ICL+ SDR planes
drm/i915: Fix page cleanup on DMA remap failure
drm/i915/pmu: Fix zero delta busyness issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft
Pull ibft fixes from Konrad Rzeszutek Wilk:
"Two tiny fixes to IBFT code: one for Kconfig and another for IPv6"
* tag 'stable/for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entry
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- fix an error handling path for md-linear
- NVMe pull request via Keith:
- Connection fixes for fibre channel transport (Daniel)
- Endian fixes (Keith, Christoph)
- Cleanup fix for host memory buffer (Francis)
- Platform specific power quirks (Georg)
- Target memory leak (Sagi)
- Use appropriate controller state accessor (Daniel)
- Fixup for a regression introduced last week, where sunvdc wasn't
updated for an API change, causing compilation failures on sparc64.
* tag 'block-6.14-20250207' of git://git.kernel.dk/linux:
drivers/block/sunvdc.c: update the correct AIP call
md: Fix linear_set_limits()
nvme-fc: use ctrl state getter
nvme: make nvme_tls_attrs_group static
nvmet: add a missing endianess conversion in nvmet_execute_admin_connect
nvmet: the result field in nvmet_alloc_ctrl_args is little endian
nvmet: fix a memory leak in controller identify
nvme-fc: do not ignore connectivity loss during connecting
nvme: handle connectivity loss in nvme_set_queue_count
nvme-fc: go straight to connecting state when initializing
nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk
nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk
nvme-pci: remove redundant dma frees in hmb
nvmet: fix rw control endian access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a handful of issues in the amd-pstate driver, the airoha
cpufreq driver build, a (recently added) possible NULL pointer
dereference in the cpufreq code and a possible memory leak in the
power capping subsystem:
- Fix cpufreq_policy reference counting and prevent max_perf from
going above the current limit in amd-pstate, and drop a redundant
goto label from it (Dhananjay Ugwekar)
- Prevent the per-policy boost_enabled flag in amd-pstate from
getting out of sync with the actual state after boot failures
(Lifeng Zheng)
- Fix a recently added possible NULL pointer dereference in the
cpufreq core (Aboorva Devarajan)
- Fix a build issue related to CONFIG_OF and COMPILE_TEST
dependencies in the airoha cpufreq driver (Arnd Bergmann)
- Fix a possible memory leak in the power capping subsystem (Joe
Hattori)"
* tag 'pm-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq: prevent NULL dereference in cpufreq_online()
cpufreq: airoha: modify CONFIG_OF dependency
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
powercap: call put_device() on an error path in powercap_register_control_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three assorted issues, including one recent regression:
- Add an ACPI IRQ override quirk for Eluktronics MECH-17 to make the
internal keyboard work (Gannon Kolding)
- Make acpi_data_prop_read() reflect the OF counterpart behavior in
error cases (Andy Shevchenko)
- Remove recently added strict ACPI PRM handler address checks that
prevented PRM from working on some platforms in the field (Aubrey
Li)"
* tag 'acpi-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Remove unnecessary strict handler address checks
ACPI: resource: IRQ override for Eluktronics MECH-17
ACPI: property: Fix return value for nval == 0 in acpi_data_prop_read()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt support in gpio-pca953x
- fix configfs attribute locking in gpio-sim
- limit the visibility of the GPIO_GRGPIO Kconfig symbol to OF systems
only
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Use my kernel.org address for ACPI GPIO work
gpio: GPIO_GRGPIO should depend on OF
gpio: sim: lock hog configfs items if present
gpio: pca953x: Improve interrupt support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
|
|
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem.
Fixes: f70000ef2352 ("drm/panthor: Add DEV_QUERY_GROUP_PRIORITIES_INFO dev query")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250119025828.1168419-1-suhui@nfschina.com
|
|
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198
[ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890
[ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28
[ 41.931289] ---[ end trace 0000000000000000 ]---
Inside the probe function when pm_runtime_enable() is called,
the PM core invokes a resume callback if the device Host1x is
in a suspended state. As it can be seen in the logs above,
this leads to host1x_intr_start() function call which is
trying to acquire a mutex lock. But, the function
host_intr_init() only gets called after the pm_runtime_enable()
where mutex is initialised leading to the use of mutex
prior to its initialisation.
Fix this by moving the mutex initialisation prior to the runtime
PM enablement function pm_runtime_enable() in probe.
Fixes: c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
Signed-off-by: Rupinderjit Singh <rusingh@redhat.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.14
Pull MD fix from Song:
"This patch, by Bart Van Assche, fixes an error handling path for
md-linear."
* tag 'md-6.14-20250206' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: Fix linear_set_limits()
|
|
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.
By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.
Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Merge a new ACPI IRQ override quirk for Eluktronics MECH-17 (Gannon
Kolding) and an acpi_data_prop_read() fix making it reflect the OF
counterpart behavior in error cases (Andy Shevchenko).
* acpi-property:
ACPI: property: Fix return value for nval == 0 in acpi_data_prop_read()
* acpi-resource:
ACPI: resource: IRQ override for Eluktronics MECH-17
|
|
Fix a possible memory leak in the power capping subsystem (Joe Hattori).
* pm-powercap:
powercap: call put_device() on an error path in powercap_register_control_type()
|
|
The FMODE_NONOTIFY_* bits are a 2-bits mode. Open coding manipulation
of those bits is risky. Use an accessor file_set_fsnotify_mode() to
set the mode.
Rename file_set_fsnotify_mode() => file_set_fsnotify_mode_from_watchers()
to make way for the simple accessor name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20250203223205.861346-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space. Remove the superfluous double spaces.
Fixes: 9d9f204bdf7243bf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the build error with clamp after WARN_ON on gcc 13.x+ (Guenter)
- HDCP related fixes (Suraj)
- PMU fix zero delta busyness issue (Umesh)
- Fix page cleanup on DMA remap failure (Brian)
- Drop 64bpp YUV formats from ICL+ SDR planes (Ville)
- GuC log related fix (Daniele)
- DisplayPort related fixes (Ankit, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6TDHpgI6dnOc0KI@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- OA uAPI related fixes (Ashutosh)
Driver Changes:
- Fix SRIOV migration initialization (Michal)
- Restore devcoredump to a sane state (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z6S9rI1ScT_5Aw6_@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple of fixes for ivpu to error handling, komeda for format
handling, AST DP timeout fix when enabling the output, locking fix for
zynqmp DP support, tiled format handling in drm/client, and refcounting
fix for bochs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206-encouraging-judicious-quoll-adc1dc@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- When saving a device's state, always save the upstream bridge's PM L1
Substates configuration as well because the bridge never saves its
own state, and restoring a device needs the state for both ends; this
was a regression that caused link and power management errors after
suspend/resume (Ilpo Järvinen)
- Correct TPH Control Register write, where we wrote the ST Mode where
the THP Requester Enable value was intended (Robin Murphy)
* tag 'pci-v6.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/TPH: Restore TPH Requester Enable correctly
PCI/ASPM: Fix L1SS saving
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.14-rc2 from Mario Limonciello:
"* Fix some error cleanup paths with mutex use and boost
* Fix a ref counting issue
* Fix a schedutil issue"
* tag 'amd-pstate-v6.14-2025-02-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
cpufreq/amd-pstate: Fix max_perf updation with schedutil
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
cpufreq/amd-pstate: Fix per-policy boost flag incorrect when fail
|
|
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that.
Fixes: 45722e777fd9 ("cpufreq: amd-pstate: Optimize amd_pstate_update_limits()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-10-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
|
|
When we reenable TPH after changing a Steering Tag value, we need the
actual TPH Requester Enable value, not the ST Mode (which only happens to
work out by chance for non-extended TPH in interrupt vector mode).
Link: https://lore.kernel.org/r/13118098116d7bce07aa20b8c52e28c7d1847246.1738759933.git.robin.murphy@arm.com
Fixes: d2e8a34876ce ("PCI/TPH: Add Steering Tag support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
|
|
Commit 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in
pci_save_aspm_l1ss_state()") aimed to perform L1SS config save for both the
Upstream Port and its upstream bridge when handling an Upstream Port, which
matches what the L1SS restore side does. However, parent->state_saved can
be set true at an earlier time when the upstream bridge saved other parts
of its state. Then later when attempting to save the L1SS config while
handling the Upstream Port, parent->state_saved is true in
pci_save_aspm_l1ss_state() resulting in early return and skipping saving
bridge's L1SS config because it is assumed to be already saved. Later on
restore, junk is written into L1SS config which causes issues with some
devices.
Remove parent->state_saved check and unconditionally save L1SS config also
for the upstream bridge from an Upstream Port which ought to be harmless
from correctness point of view. With the Upstream Port check now present,
saving the L1SS config more than once for the bridge is no longer a problem
(unlike when the parent->state_saved check got introduced into the fix
during its development).
Link: https://lore.kernel.org/r/20250131152913.2507-1-ilpo.jarvinen@linux.intel.com
Fixes: 1db806ec06b7 ("PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219731
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/r/CAJZ5v0iKmynOQ5vKSQbg1J_FmavwZE-nRONovOZ0mpMVauheWg@mail.gmail.com
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/d7246feb-4f3f-4d0c-bb64-89566b170671@molgen.mpg.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
|
|
The find_preferred_mode() functions takes the mode_config mutex, but due
to the order most tests have, is called with the crtc_ww_class_mutex
taken. This raises a warning for a circular dependency when running the
tests with lockdep.
Reorder the tests to call find_preferred_mode before the acquire context
has been created to avoid the issue.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-4-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The tests all deviate slightly in how they assign their local pointers
to DRM entities. This makes refactoring pretty difficult, so let's just
move the assignment as soon as the entities are allocated.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-3-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some tests have the drm pointer assigned multiple times to the same
value. Drop the redundant assignments.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-2-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The light_up_connector helper function in the HDMI infrastructure unit
tests uses drm_atomic_set_crtc_for_connector(), but fails when it
returns an error.
This function can return EDEADLK though if the sequence needs to be
restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it
properly.
Let's handle EDEADLK and restart the sequence in our tests as well.
Fixes: eb66d34d793e ("drm/tests: Add output bpc tests")
Reported-by: Dave Airlie <airlied@gmail.com>
Closes: https://lore.kernel.org/r/CAPM=9tzJ4-ERDxvuwrCyUPY0=+P44orhp1kLWVGL7MCfpQjMEQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241031091558.2435850-1-mripard@kernel.org
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-1-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
When there is no dummy cycle in the spi-nor commands, both dummy bus cycle
bytes and width are zero. Because of the cpu's warning when divided by
zero, the warning should be avoided. Return just zero to avoid such
calculations.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20250206085747.3834148-1-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
stmmaceth f0804000.eth: Can't specify Rx FIFO size
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/4e98f967-f636-46fb-9eca-d383b9495b86@roeck-us.net
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Steven Price <steven.price@arm.com>
Fixes: 8865d22656b4 ("net: stmmac: Specify hardware capability value when FIFO size isn't specified")
Link: https://patch.msgid.link/E1tfeyR-003YGJ-Gb@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
unconditionally switched to printing hex values in
pinconf_generic_dump_one(). However, if a dump format is registered for the
dumped pin, the hex value is printed as well. This hex value does not
necessarily correspond 1:1 with the hardware register value (as noted by
commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")). As a
result, user-facing output may include information like:
output drive strength (0x100 uA).
To address this, check if a dump format is registered for the dumped
property, and print the unsigned value instead when applicable.
Fixes: 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20250205101058.2034860-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allocate a PAGE aligned doorbell index to ensure each process gets a
separate PAGE sized doorbell area space remapped to it in mana_ib_mmap
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1738751405-15041-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Merge the few remaining patches stuck into drm-misc-next-fixes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Memory regions (MR) of type DM (device memory) do not have an associated
umem.
In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code
incorrectly takes the wrong branch, attempting to call
dma_unmap_single() on a DMA address that is not mapped.
This results in a WARN [1], as shown below.
The issue is resolved by properly accounting for the DM type and
ensuring the correct branch is selected in mlx5_free_priv_descs().
[1]
WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90
Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00
RSP: 0018:ffffc90001913a10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x84/0x190
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0xf8/0x1c0
? handle_bug+0x55/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
dma_unmap_page_attrs+0xe6/0x290
mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib]
__mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib]
? _raw_spin_unlock_irq+0x24/0x40
? wait_for_completion+0xfe/0x130
? rdma_restrack_put+0x63/0xe0 [ib_core]
ib_dereg_mr_user+0x5f/0x120 [ib_core]
? lock_release+0xc6/0x280
destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs]
uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs]
uobj_destroy+0x3f/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs]
? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs]
? lock_acquire+0xc1/0x2f0
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs]
? lock_release+0xc6/0x280
ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs]
? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs]
__x64_sys_ioctl+0x1b0/0xa70
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f537adaf17b
Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b
RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270
R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190
R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450
</TASK>
Fixes: f18ec4223117 ("RDMA/mlx5: Use a union inside mlx5_ib_mr")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/2039c22cfc3df02378747ba4d623a558b53fc263.1738587076.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This patch addresses a potential race condition for a DMABUF MR that can
result in a CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_dmabuf_invalidate_cb() might be triggered
by another task attempting to invalidate the MR having that freed lkey.
Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state.
To resolve this race condition, the dma_resv_lock() which was hold as
part of the mlx5_ib_dmabuf_invalidate_cb() is now also acquired as part
of the mlx5_revoke_mr() scope.
Upon a successful revoke, we set umem_dmabuf->private which points to
that MR to NULL, preventing any further invalidation attempts on its
lkey.
Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Artemy Kovalyov <artemyko@mnvidia.com>
Link: https://patch.msgid.link/70617067abbfaa0c816a2544c922e7f4346def58.1738587016.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") added unnecessary strict handler address checks,
causing the PRM module to fail in translating memory error addresses.
Both static data buffer address and ACPI parameter buffer address may
be NULL if they are not needed, as described in section 4.1.2 PRM Handler
Information Structure of Platform Runtime Mechanism specification [1].
Here are two examples from real hardware:
----PRMT.dsl----
- staic data address is not used
[10Ch 0268 2] Revision : 0000
[10Eh 0270 2] Length : 002C
[110h 0272 16] Handler GUID : F6A58D47-E04F-4F5A-86B8-2A50D4AA109B
[120h 0288 8] Handler address : 0000000065CE51F4
[128h 0296 8] Satic Data Address : 0000000000000000
[130h 0304 8] ACPI Parameter Address : 000000006522A718
- ACPI parameter address is not used
[1B0h 0432 2] Revision : 0000
[1B2h 0434 2] Length : 002C
[1B4h 0436 16] Handler GUID : 657E8AE6-A8FC-4877-BB28-42E7DE1899A5
[1C4h 0452 8] Handler address : 0000000065C567C8
[1CCh 0460 8] Satic Data Address : 000000006113FB98
[1D4h 0468 8] ACPI Parameter Address : 0000000000000000
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-and-tested-by: Shi Liu <aurelianliu@tencent.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Reviewed-by: Koba Ko <kobak@nvidia.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20250126022250.3014210-1-aubrey.li@linux.intel.com
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While analysing code for software and OF node for the corner case when
caller asks to read zero items in the supposed to be an array of values
I found that ACPI behaves differently to what OF does, i.e.
1. It returns -EINVAL when caller asks to read zero items from integer
array, while OF returns 0, if no other errors happened.
2. It returns -EINVAL when caller asks to read zero items from string
array, while OF returns -ENODATA, if no other errors happened.
Amend ACPI implementation to follow what OF does.
Fixes: b31384fa5de3 ("Driver core: Unified device properties interface for platform firmware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250203194629.3731895-1-andriy.shevchenko@linux.intel.com
[ rjw: Added empty line after a conditional ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ensure cpufreq_driver->set_boost is non-NULL before using it in
cpufreq_online() to prevent a potential NULL pointer dereference.
Reported-by: Gautam Menghani <gautam@linux.ibm.com>
Closes: https://lore.kernel.org/all/c9e56c5f54cc33338762c94e9bed7b5a0d5de812.camel@linux.ibm.com/
Fixes: dd016f379ebc ("cpufreq: Introduce a more generic way to set default per-policy boost flag")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/20250205181347.2079272-1-aboorvad@linux.ibm.com
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Compile-testing without CONFIG_OF leads to a harmless build warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.
An earlier commit, b865a8404642 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.
Fix it properly.
Fixes: 84cf9e541ccc ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a8404642 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
