| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes for graphics, nothing too major, nouveau has a few
regression fixes for various fallout from header changes previously,
vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.
All seems on course for a quieter rc7, fingers crossed.
nouveau:
- fix svm init conditions
- fix nv50 modesetting regression
- fix cursor plane modifiers
- fix > 64x64 cursor regression
vc4:
- Fix LBM size calculation
- Fix high resolutions for hvs5
i915:
- Fix ICL MG PHY vswing
- Fix subplatform handling
- Fix selftest memleak
- Clear CACHE_MODE prior to clearing residuals
- Always flush the active worker before returning from the wait
- Always try to reserve GGTT address 0x0
amdgpu:
- Fix a fan control regression on some boards
- Fix clang warning"
* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
drm/nouveau/kms/nv50-: Report max cursor size to userspace
drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
drm/nouveau/dispnv50: Restore pushing of all data.
amdgpu: fix clang build warning
Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
drm/i915/gt: Always try to reserve GGTT address 0x0
drm/i915: Always flush the active worker before returning from the wait
drm/i915/selftest: Fix potential memory leak
drm/i915: Check for all subplatform bits
drm/i915: Fix ICL MG PHY vswing handling
drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
drm/vc4: Correct POS1_SCL for hvs5
drm/vc4: Correct lbm size and calculation
drm/nouveau/nvif: fix method count when pushing an array
|
|
It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).
That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).
This subtly broke the tty conversion to write_iter in commit
9bb48c82aced ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.
The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.
Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer. Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.
Fixes: 9bb48c82aced ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.
Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In testing, in a configuration with Redfish and native NVMe multipath when
an EEH is injected, a kernel oops is being encountered:
(unreliable)
lpfc_nvme_ls_req+0x328/0x720 [lpfc]
__nvme_fc_send_ls_req.constprop.13+0x1d8/0x3d0 [nvme_fc]
nvme_fc_create_association+0x224/0xd10 [nvme_fc]
nvme_fc_reset_ctrl_work+0x110/0x154 [nvme_fc]
process_one_work+0x304/0x5d
the NBMe transport is issuing a Disconnect LS request, which the driver
receives and tries to post but the work queue used by the driver is already
being torn down by the eeh.
Fix by validating the validity of the work queue before proceeding with the
LS transmit.
Link: https://lore.kernel.org/r/20210127221601.84878-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Similar to mt7921 devices, introduce coredump support for mt7663 chipset
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce coredump support to mt7921 driver.
The coredump would be produced when MCU met the fatal error or driver
sent out the specific cmd to force trigger it.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MSI interrupts for mt7921 driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Register regdomain notifier to determine the channel domain the hw scan
should rely on.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce runtime PM to mt7921 driver
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rely on mt76_connac_mcu module for suspend and WoW support and remove
duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rely on mt76_connac_mcu module for sched_scan and hw_scan and remove
duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rely on mt76_connac_mcu common library and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce suspend/resume and WoW (Wake-on-WoWLAN) support to mt7921
driver to allow remote wakeu-up from the suspend state.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If device has enabled beacon hw filter rx beacons are not reported to
the host. Introduce beacon_loss mcu event to trigger mac80211 mlme
connection state machine in this configuration.
IEEE80211_VIF_BEACON_FILTER has not set in vif flags since hw beacon
filter is not enabled yet
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce support for hw beacon filter available in the mt7921 firmware.
According to mt7921e firmware, enabling hardware filter would rely on
mt7921_mcu_uni_bss_bcnft and disabling hardware filter still rely on legacy
mt7921_mcu_set_bss_pm.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable 802.11 power-save support available in mt7921 firmware
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
introduce schedule scan to control mt7921 firmware to do background scan in
defined plan to see if the matched SSID is available.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add debugfs support to dump driver statistics and hardware details.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce support for mt7921e 802.11ax (Wi-Fi 6) 2x2:2SS chipset.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Filling ieee80211_ops with the mt7921 operations.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add EEPROM support to MT7921 to determine the capability the card has
such as indentificaiton, MAC address, the band and antenna number the
card able to support.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add DMA and register access support to MT7921e driver to set up the link
for the data movement between the host and MT7921 MAC, or the host and
MT7921 MCU.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
MT7921 contains a microprocessor with which the host can use command/event
to communicate to implement offload features such as establish connection,
hardware scan and so on. The host has to download the ROM patch, RAM
firmware and finally activate the MCU to complete the MT7921
initialization.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add Rx packet description parsing, Tx packet description compositon, handle
packet recycling and provide MAC information mt76 core needs to support
mac80211.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
make coccicheck complains:
./drivers/bus/mvebu-mbus.c:1113:2-8: ERROR: missing iounmap; ioremap on line 1106 and execution via conditional on line 1111
It took some staring but I don't think there is a problem because the
file global `mbus_state` is passed mvebu_mbus_common_init() as the
`mbus` parameter so `mbus_state.mbuswins_base` and `mbus->mbuswins_base`
are the same thing. But this is confusing for anyone reading the code
and one less complaint from coccicheck would be nice so lets fix it.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The debugging code in the following ifdef land
- QL_ALL_DUMP
- QL_REG_DUMP
- QL_DEV_DUMP
- QL_CB_DUMP
- QL_IB_DUMP
- QL_OB_DUMP
becomes unnecessary because,
- Device status and general registers can be obtained by ethtool.
- Coredump can be done via devlink health reporter.
- Structure related to the hardware (struct ql_adapter) can be obtained
by crash or drgn.
Link: https://lkml.org/lkml/2020/6/30/19
Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-8-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ring buffer
devlink health could be used to get coredump. No need to send so much
data to the kernel ring buffer.
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-7-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With force_coredump module parameter set, devlink health dump will
reset the MPI RISC first which takes 5 secs to be finished.
Note that only NIC function that owns the firmware can do the
force_dumping. Otherwise devlink will receive an EPERM error.
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-6-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
$ devlink health dump show DEVICE reporter coredump -p -j
{
"Core Registers": {
"segment": 1,
"values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
},
"Test Logic Regs": {
"segment": 2,
"values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
},
"RMII Registers": {
"segment": 3,
"values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
},
...
"Sem Registers": {
"segment": 50,
"values": [ 0,0,0,0 ]
}
}
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-5-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stop calling ql_release_all in qlge_init_device and free things one step
at a time.
struct qlge_adapter *qdev is now a private structure of struct devlink
and memset is not necessary.
Link: https://lore.kernel.org/patchwork/patch/1321092/#1516928
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-4-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Initialize devlink health dump framework for the qlge driver so the
coredump could be done via devlink.
struct qlge_adapter is now used as the private data structure of
struct devlink so it could exist independently of struct net_device
and devlink reload could be supported in the future. The private data
of PCIe driver now points to qlge_adapter.
Since devlink_alloc will zero out struct qlge_adapter, memset in
qlge_init_device is not necessary.
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-3-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
qlogic drivers
To avoid namespace clashes with other qlogic drivers and also for the
sake of naming consistency, use the "qlge_" prefix as suggested in
drivers/staging/qlge/TODO,
- For existing ql_ prefix,
sed -i "s/ql_/qlge_/g" *.{c,h}
- for structs not having a prefix
1. get a list of structs
grep "struct.*{" qlge.
2. add qlge_ for each struct, e.g.,
sed -i "s/ib_ae_iocb_rsp/qlge_ib_ae_iocb_rsp/g" *.{c,h}
Link: https://lore.kernel.org/patchwork/patch/1318503/#1516131
Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20210123104613.38359-2-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
By this change, it will enable WBS supported on the specific Realtek BT
devices, such as RTL8822C and RTL8852A.
In the future, it's able to maintain what the Realtek devices support WBS
here.
Tested-by: Hilda Wu <hildawu@realtek.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Playing audio with PulseAudio and the bcm2835-pcm driver results
in distorted sound. Timer-based scheduling does not properly work
with bcm2835-pcm since configuring PulseAudio with tsched=0
avoids this problem.
Setting the SNDRV_PCM_INFO_BATCH flag prevents PulseAudio to use
timer-based scheduling by default. Settings this flag makes audio
works out of the box.
Based on: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7f2430cda819a9ecb1df5a0f3ef4f1c20db3f811
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Link: https://lore.kernel.org/r/20210127174348.10192-1-me@dylanvanassche.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
result
The variable result is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210128173703.645328-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* acpi-sysfs:
ACPI: sysfs: Prefer "compatible" modalias
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas driver updates for v5.12
- Miscellaneous fixes and improvements.
* tag 'renesas-drivers-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
Link: https://lore.kernel.org/r/20210129090815.2552425-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
To avoid potential compilation problems, replaced the badly written
MB_TO_SECTS() macro (missing parenthesis around the argument use) with
the inline function mb_to_sects(). And while at it, simplify the
calculation of the total number of zones of the device using the
round_up() macro.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move power_save common code shared between mt7663 and mt7921 in
mt76_connac module
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move pm mt7663 data structure in mt76_connac.h introducing
mt76_connac_pm data struct. This is a preliminary patch to share pm code
between mt7663 and mt7921
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move WoW and suspend code in mt76_connac_mcu module in order to be reused in
mt7615 and mt7921 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move hw_scan/sched_scan in mt76_connac_mcu module in order to be reused in
mt7615 and mt7921 drivers
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt76_connac common mcu library for code sharing between mt7615 and
mt7921 devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt76_vif data structure to share common fields between
mt7615_vif and mt7921_vif and create a mcu common library
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In gpiochip_add_data_with_key, we should check the return value of
dev_set_name to ensure that device name is allocated successfully
and then add a label on the error path to free device name to fix
kmemleak as below:
unreferenced object 0xc2d6fc40 (size 64):
comm "kworker/0:1", pid 16, jiffies 4294937425 (age 65.120s)
hex dump (first 32 bytes):
67 70 69 6f 63 68 69 70 30 00 1a c0 54 63 1a c0 gpiochip0...Tc..
0c ed 84 c0 48 ed 84 c0 3c ee 84 c0 10 00 00 00 ....H...<.......
backtrace:
[<962810f7>] kobject_set_name_vargs+0x2c/0xa0
[<f50797e6>] dev_set_name+0x2c/0x5c
[<94abbca9>] gpiochip_add_data_with_key+0xfc/0xce8
[<5c4193e0>] omap_gpio_probe+0x33c/0x68c
[<3402f137>] platform_probe+0x58/0xb8
[<7421e210>] really_probe+0xec/0x3b4
[<000f8ada>] driver_probe_device+0x58/0xb4
[<67e0f7f7>] bus_for_each_drv+0x80/0xd0
[<4de545dc>] __device_attach+0xe8/0x15c
[<2e4431e7>] bus_probe_device+0x84/0x8c
[<c18b1de9>] device_add+0x384/0x7c0
[<5aff2995>] of_platform_device_create_pdata+0x8c/0xb8
[<061c3483>] of_platform_bus_create+0x198/0x230
[<5ee6d42a>] of_platform_populate+0x60/0xb8
[<2647300f>] sysc_probe+0xd18/0x135c
[<3402f137>] platform_probe+0x58/0xb8
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
If we receive a transfer event indicating that an endpoint should be
halted, but current endpoint state doesn't match it, then the halt might
be just resolved by the stop endpoint completion handler that detects the
halted endpoint due to a context state error.
In this case the TD we halted on is already moved to the cancelled TD list,
and should not be successfully completed and given back anymore.
Let the stop endpoint completion handler reset the endpoint, and then let
the reset endpoint handler give back the cancelled TD among all other
ones on the cancelled TD list
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-28-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A halted endpoint can be detected both when transfer events complete, and
in stop endpoint command completion. Both these handlers will start
clearing up the halted endpoint and queue a reset endpoint command.
It's possible to get both events for the same halted endpoint if right
after a URB cancel queues a stop endpoint command the endpoint stalls.
Use the EP_HALTED flag to prevent resetting the endpoint twice.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-27-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xhci_find_new_dequeue_state() and xhci_queue_new_dequeue_state() are no
longer used afer introducing the move_dequeue_past_td() function.
also remove struct xhci_dequeue_state as its no longer used.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace xhci_find_new_dequeue_state() and xhci_queue_new_dequeue_state()
functions with one combined function.
These function were always called after each other, and had a lot of extra
code just to pass the newly found dequeue state from the first function
to the other.
The new function also returns error in case there is a failure to
queue the new dequeue state. This way the caller can decide on
recovery measures to handle it.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-25-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Handle race where a stop endpoint command fails with "context state error"
as hardware hasn't actually started the ring yet after a previous urb
cancellation completed and restarted the endpoint.
Flushing the doorbell write that restart the endpoint reduced these cases,
but didn't completely resolve them.
Check if the ring is running in the stop endpoint completion handler, and
issue a new stop endpoint command in this case.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210129130044.206855-24-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
