summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-09-28Revert "[media] media: em28xx - remove reset_resume interface"Mauro Carvalho Chehab
The reset_resume call is needed, otherwise it will break resume on some conditions, depending on the usb ehci/xhci controller. This reverts commit b89193e0b06f44f48e3bf897a5b5cb4a7aff3359. Reported-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-28serial: 8250: Add Quark X1000 to 8250_pci.cBryan O'Donoghue
Quark X1000 contains two designware derived 8250 serial ports. Each port has a unique PCI configuration space consisting of BAR0:UART BAR1:DMA respectively. Unlike the standard 8250 the register width is 32 bits for RHR,IER etc The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a bitrate of up to about 2.76 megabits per second. This patch enables standard 8250 mode Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28tty: omap-serial: pull out calculation from baud_is_mode16Frans Klaver
To determine the correct divisor, we need to know the difference between the desired baud rate and the actual baud rate. The calculation for this difference is implemented twice within omap_serial_baud_is_mode16(). Pull out the calculation for easier maintenance. While at it, remove the CamelCasing from the variable names. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28tty: omap-serial: fix division by zeroFrans Klaver
If the chosen baud rate is large enough (e.g. 3.5 megabaud), the calculated n values in serial_omap_is_baud_mode16() may become 0. This causes a division by zero when calculating the difference between calculated and desired baud rates. To prevent this, cap the n13 and n16 values on 1. Division by zero in kernel. [<c00132e0>] (unwind_backtrace) from [<c00112ec>] (show_stack+0x10/0x14) [<c00112ec>] (show_stack) from [<c01ed7bc>] (Ldiv0+0x8/0x10) [<c01ed7bc>] (Ldiv0) from [<c023805c>] (serial_omap_baud_is_mode16+0x4c/0x68) [<c023805c>] (serial_omap_baud_is_mode16) from [<c02396b4>] (serial_omap_set_termios+0x90/0x8d8) [<c02396b4>] (serial_omap_set_termios) from [<c0230a0c>] (uart_change_speed+0xa4/0xa8) [<c0230a0c>] (uart_change_speed) from [<c0231798>] (uart_set_termios+0xa0/0x1fc) [<c0231798>] (uart_set_termios) from [<c022bb44>] (tty_set_termios+0x248/0x2c0) [<c022bb44>] (tty_set_termios) from [<c022c17c>] (set_termios+0x248/0x29c) [<c022c17c>] (set_termios) from [<c022c3e4>] (tty_mode_ioctl+0x1c8/0x4e8) [<c022c3e4>] (tty_mode_ioctl) from [<c0227e70>] (tty_ioctl+0xa94/0xb18) [<c0227e70>] (tty_ioctl) from [<c00cf45c>] (do_vfs_ioctl+0x4a0/0x560) [<c00cf45c>] (do_vfs_ioctl) from [<c00cf568>] (SyS_ioctl+0x4c/0x74) [<c00cf568>] (SyS_ioctl) from [<c000e480>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28xen_hvc: no reason to write the type key on xenstoreStefano Stabellini
The backend type is chosen by the toolstack. Regardless, the frontend should not care, especially given that it cannot have an effect as the backend is started before this code is run. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-28[media] pt3: fix DTV FE I2C driver load error pathsAntti Palosaari
Get rid of 'module_is_live' usage. on x86_64: when CONFIG_MODULES is not enabled: ../drivers/media/pci/pt3/pt3.c: In function 'pt3_attach_fe': ../drivers/media/pci/pt3/pt3.c:433:6: error: implicit declaration of function 'module_is_live' [-Werror=implicit-function-declaration] Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Akihiro Tsukada <tskd08@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-29clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enableNathan Lynch
The arch_timer_evtstrm_enable hooks in arm and arm64 are substantially similar, the only difference being a CONFIG_COMPAT-conditional section which is relevant only for arm64. Copy the arm64 version to the driver, removing the arch-specific hooks. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29clocksource: arm_arch_timer: Enable counter access for 32-bit ARMNathan Lynch
The only difference between arm and arm64's implementations of arch_counter_set_user_access is that 32-bit ARM does not enable user access to the virtual counter. We want to enable this access for the 32-bit ARM VDSO, so copy the arm64 version to the driver itself, and remove the arch-specific implementations. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29clocksource: arm_arch_timer: Change clocksource name if CP15 unavailableNathan Lynch
The arm and arm64 VDSOs need CP15 access to the architected counter. If this is unavailable (which is allowed by ARM v7), indicate this by changing the clocksource name to "arch_mem_counter" before registering the clocksource. Suggested by Stephen Boyd. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com>
2014-09-29clocksource: sirf: Disable counter before re-setting itHao Liu
According to HW spec, we have to disable the counter before setting it, if we don't this, in pressure test, sometimes the timer might not generate interrupt any more. And this patch also fixes a typo for register set by changing 0x7 to 0x3. 0x7 is loop mode in HW, but here we are using oneshot 0x3. Signed-off-by: Hao Liu <Hao.Liu@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29clocksource: cadence_ttc: Add support for 32bit modeMichal Simek
New TTCs support 32bit mode. Older versions support only 16bit modes. Keep 16bit mode as default and 32bit optional. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29clocksource: tcb_clksrc: Sanitize IRQ requestGael Portay
The clock is not unprepared in case of the request IRQ fails. Also update to request_irq. Signed-off-by: Gaël PORTAY <gael.portay@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29clocksource: arm_arch_timer: Discard unavailable timers correctlySudeep Holla
Currently we wait until both cp15 and mem timers are probed if we have both timer device nodes present in the device tree without checking if the device is actually available. If one of the timer device node present is disabled, the system locks up on the boot as no timer gets registered. This patch adds the check for the availability of the timer device so that unavailable timers are discarded correctly. It also adds the missing of_node_put. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-09-29clocksource: vf_pit_timer: Support shutdown modeStefan Agner
In order to avoid waking up the system in a low power mode, the clocksource should not generate interrupts anymore. Disable the PIT timer interrupt when changing into the CLOCK_EVT_MODE_SHUTDOWN mode. [dlezcano] : remove superfluous empty line Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
2014-09-29ARM: meson6: clocksource: Add Meson6 timer supportCarlo Caione
Meson6 SoCs are equipped with 5 32-bit timers, called TIMER_A, TIMER_B, TIMER_C, TIMER_D and TIMER_E. The driver is providing clocksource support for the 32-bit counter using TIMER_E. Clockevents are also supported using TIMER_A. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-09-28mtd: move support for struct flash_platform_data into m25p80Rafał Miłecki
This "type" seems to be an extra hint for m25p80 about the flash. Some archs register flash_platform_data with "name" set to "m25p80" and then with a real flash name set in "type". It seems to be a trick specific to the m25p80 so let's move it out of spi-nor. Btw switch to the spi_nor_match_id instead of iterating spi_nor_ids. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28cxgb4: Add support for adaptive rxHariprasad Shenai
Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4/cxgb4vf: Add Devicde ID for two more adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro.Hariprasad Shenai
Remove redundant idx parameter of CH_DEVICE() macro, its always zero. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4: Use BAR2 Going To Sleep (GTS) for T5 and later.Hariprasad Shenai
Use BAR2 GTS for T5. If we are on T4 use the old doorbell mechanism; otherwise ue the new BAR2 mechanism. Use BAR2 doorbells for refilling FL's. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28mlx4: exploit skb->xmit_more to conditionally send doorbellEric Dumazet
skb->xmit_more tells us if another skb is coming next. We need to send doorbell when : xmit_more is not set, or txqueue is stopped (preventing next skb to come immediately) Tested with a modified pktgen version, I got a 40% increase of throughput. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: support ethtool eeehayeswang
Support get_eee() and set_eee() of ethtool_ops. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: add functions to set EEEhayeswang
Add functions to enable EEE and set EEE advertisement. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28r8152: change the EEE definitionhayeswang
Replace the EEE definitions with the ones which is declared in "mdio.h". Chage some definitions to make them readable. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's ESIC port I/O decoding cleanupMaciej W. Rozycki
Use the slot-specific I/O range for decoding accesses to PDQ ASIC registers (IOCS0) and the discrete Burst Holdoff register (IOCS1) as per the "HD64981F EISA Slave Interface Controller (ESIC)" datasheet. Use disjoint decode ranges now that the assignment of chip selects is known. Update the span of the port I/O resource requested accordingly. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: DEFEA's Burst Holdoff register initialization fixMaciej W. Rozycki
Use the mask rather than bit number macro to initialize the chip select control bit for PDQ register space decoding in the Burst Holdoff register. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28defxx: Correct DEFEA's ESIC port I/O accessesMaciej W. Rozycki
Reverse the order of arguments to `outb', data to write comes first. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28mtd: spi-nor: add Kconfig option to disable 4K sectorsRafał Miłecki
Current situation with 4K sectors is quite messy. First of all, some MTD "users" don't work with such small size. An example may be UBIFS which requires 15 KiB erase blocks as a minimum. In theory spi-nor should provide multiple erase regions and MTD "users" should use the one they need. Unforunately that is not implemented. In the result our flashes database in spi-nor is hackish. For some flashes we pretend they don't support 4K sectors just because some distribution uses UBIFS on it. This ofc leads to conflicts, like Samsung using w25q128 with 4K sectors vs. OpenWrt requiring it to pretend it's 64 KiB blocks only. My idea (plan?) for fixing this situation: 1) Use real hw info (this requires a way for disabling 4K for now) 2) Provide detailed info about erase regions 3) Make UBIFS work with devices that support 4K sectors Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28net: dsa: bcm_sf2: add support for controlling EEEFlorian Fainelli
When EEE is enabled, negotiate this feature with the PHY and make sure that the capability checking, local EEE advertisement, link partner EEE advertisement and auto-negotiation resolution returned by phy_init_eee() is positive, and enable EEE at the switch level. While querying the current EEE settings, verify the low-power indication and indicate its status. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: bcm_sf2: add port_enable/disable callbacksFlorian Fainelli
The SF2 switch driver is already architected around per-port enable/disable callbacks, so we just need a slight update to our existing bcm_sf2_port_setup() resp. bcm_sf2_port_disable() functions to be suitable as callbacks for port_enable/port_disable. We need to shuffle a little the code that does the per-port VLAN configuration/isolation since ports can now be brought up/down separately, so we need to make sure that IMP (CPU, management) port is always included in that specific port setup. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28net: dsa: bcm_sf2: disable RGMII interface(s) when link is downFlorian Fainelli
When the link is down, disable the RGMII interface to conserve as much power as possible. We re-enable the RGMII interface whenever the link is detected. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Two small fixes for omap dmaengine driver which fixes cyclic suspend and resume" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: omap-dma: Restore the CLINK_CTRL in resume path dmaengine: omap-dma: Add memory barrier to dma_resume path
2014-09-28Merge tag 'hix5hd2-clock-for-3.18-v2' of ↵Mike Turquette
git://github.com/hisilicon/linux-hisi into clk-next Hisilicon HiX5HD2 clock updates for 3.18-v2 - Add I2C clocks - Add watchdog clocks - Add sd clocks - Add complex clock implementation to support sata, usb and ethernet
2014-09-28dma: imx-sdma: fix another incorrect __init annotationArnd Bergmann
In e34b731faa7d1 ("dma: imx-sdma: Remove spurious __init annotation on sdma_probe()"), Mark found an extraneous __init label and fixed it. However, he missed another one, because now we get this other warning: WARNING: drivers/dma/imx-sdma.o(.text+0x3bb4): Section mismatch in reference from the function sdma_probe() to the function .init.text:sdma_get_firmware() The function sdma_probe() references the function __init sdma_get_firmware(). Same reasoning as the last time, the function may get called at runtime, so it can't be __init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-28AHCI: Cleanup checking of multiple MSIs/SLM modesAlexander Gordeev
Sharing Last Message (SLM) mode is currently checked in two functions: ahci_host_activate() and ahci_init_interrupts(). This update consolidates SLM mode check with activation of multiple MSIs mode. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: linux-ide@vger.kernel.org
2014-09-28libata-sff: Fix controllers with no ctl portOndrej Zary
Currently, ata_sff_softreset is skipped for controllers with no ctl port. But that also skips ata_sff_dev_classify required for device detection. This means that libata is currently broken on controllers with no ctl port. No device connected: [ 1.872480] pata_isapnp 01:01.02: activated [ 1.889823] scsi2 : pata_isapnp [ 1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.888110] ata3.01: qc timeout (cmd 0xec) [ 6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.888085] ata3.01: qc timeout (cmd 0xec) [ 16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.888086] ata3.01: qc timeout (cmd 0xec) [ 46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 51.888100] ata3.00: qc timeout (cmd 0xec) [ 51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 61.888079] ata3.00: qc timeout (cmd 0xec) [ 61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 91.888089] ata3.00: qc timeout (cmd 0xec) [ 91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5) ATAPI device connected: [ 1.882061] pata_isapnp 01:01.02: activated [ 1.893430] scsi2 : pata_isapnp [ 1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 6.892107] ata3.01: qc timeout (cmd 0xec) [ 6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 16.892079] ata3.01: qc timeout (cmd 0xec) [ 16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.892079] ata3.01: qc timeout (cmd 0xec) [ 46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5) [ 46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 46.924570] ata3.00: configured for PIO0 (device error ignored) [ 46.926295] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray [ 46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20 So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset if the ctl port is not available. This makes IDE port on ES968 behave correctly: No device connected: [ 4.670888] pata_isapnp 01:01.02: activated [ 4.673207] scsi host2: pata_isapnp [ 4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 7.081840] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k ATAPI device connected: [ 4.704362] pata_isapnp 01:01.02: activated [ 4.706620] scsi host2: pata_isapnp [ 4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11 [ 4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr [ 4.888673] ata3.00: configured for PIO0 (device error ignored) [ 4.893984] scsi 2:0:0:0: CD-ROM ACER CD-767E/O 1.5X PQ: 0 ANSI: 5 [ 7.015578] Adding 2541652k swap on /dev/sda2. Priority:-1 extents:1 across:2541652k Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-09-28net_dma: simple removalDan Williams
Per commit "77873803363c net_dma: mark broken" net_dma is no longer used and there is no plan to fix it. This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards. Reverting the remainder of the net_dma induced changes is deferred to subsequent patches. Marked for stable due to Roman's report of a memory leak in dma_pin_iovec_pages(): https://lkml.org/lkml/2014/9/3/177 Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: David Whipple <whipple@securedatainnovations.ch> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: <stable@vger.kernel.org> Reported-by: Roman Gushchin <klamm@yandex-team.ru> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2014-09-28Merge remote-tracking branch 'regulator/topic/sky81452' into regulator-driversMark Brown
Conflicts: drivers/regulator/Kconfig drivers/regulator/Makefile
2014-09-28Merge remote-tracking branch 'regulator/topic/pwm' into regulator-driversMark Brown
Conflicts: drivers/regulator/Kconfig
2014-09-28regmap: fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li
Since we cannot make sure the 'val_count' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-28regmap: debugfs: fix possbile NULL pointer dereferenceXiubo Li
If 'map->dev' is NULL and there will lead dev_name() to be NULL pointer dereference. So before dev_name(), we need to have check of the map->dev pionter. We also should make sure that the 'name' pointer shouldn't be NULL for debugfs_create_dir(). So here using one default "dummy" debugfs name when the 'name' pointer and 'map->dev' are both NULL. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-28regulator: pwm-regulator: get voltage and duty table from dtsChris Zhong
rename st-pwm to pwm-regulator. And support getting voltage & duty table from device tree, other platforms can also use this driver without any modify. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-28clk: hix5hd2: add I2C clocksWei Yan
hix5hd2 add I2C clocks (I2C0~i2C5) Signed-off-by: Wei Yan <sledge.yanwei@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add watchdog0 clocksGuoxiong Yan
hix5hd2 add watchdog0 clocks Signed-off-by: Guoxiong Yan <yanguoxiong@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add sd clkJiancheng Xue
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28clk: hix5hd2: add complex clkZhangfei Gao
Support clk of sata, usb and ethernet Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2014-09-28ACPI / SBS: Fix check in acpi_ac_get_present()Rafael J. Wysocki
Parentheses are missing under an if () statement in acpi_ac_get_present() which makes the check work differently from what was intended (at least according to the comment right above it). Add the missing parens. The problem was found by sparse. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: All applicable <stable@vger.kernel.org>
2014-09-27clk: use uninitialized_var instead setting 'flags' to 0 directly.Xiubo Li
Setting 'flags' to zero will be certainly a misleading way to avoid warning of 'flags' may be used uninitialized. uninitialized_var is a correct way because the warning is a false possitive. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-27Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's our last set of fixes for 3.17. Most of these are for TI platforms, fixing some noisy Kconfig issues, runtime clock and power issues on several platforms and NAND timings on DRA7. There are also a couple of bug fixes for i.MX, one for QCOM and a small fix to avoid section mismatch noise on PXA. Diffstat looks large, partially due to some tables being updated and thus touching many lines. The qcom gsbi change also restructures clock management a bit and thus touches a bunch of lines. All in all, a bit more changes than we'd like at this point, but nothing stands out as risky either so it seems like the right thing to send it up now instead of holding it to the merge window" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers/soc: qcom: do not disable the iface clock in probe ARM: imx: fix .is_enabled() of shared gate clock ARM: OMAP3: Fix I/O chain clock line assertion timed out error ARM: keystone: dts: fix bindings for pcie and usb clock nodes bus: omap_l3_noc: Fix connID for OMAP4 ARM: DT: imx53: fix lvds channel 1 port ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init ARM: OMAP: Fix Kconfig warning for omap1
2014-09-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This has: - EFI revert to fix a boot regression - early_ioremap() fix for boot failure - KASLR fix for possible boot failures - EFI fix for corrupted string printing - remove a misleading EFI bootup 'failed!' error message Unfortunately it's all rather close to the merge window" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Truncate 64-bit values when calling 32-bit OutputString() x86/efi: Delete misleading efi_printk() error message Revert "efi/x86: efistub: Move shared dependencies to <asm/efi.h>" x86/kaslr: Avoid the setup_data area when picking location x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8
generated by cgit (git 2.34.1) at 2025-09-18 06:55:49 +0000