summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-08-15Merge tag 'net-6.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter Current release - regressions: - udp: fall back to software USO if IPv6 extension headers are present - wifi: iwlwifi: correctly lookup DMA address in SG table Current release - new code bugs: - eth: mlx5e: fix queue stats access to non-existing channels splat Previous releases - regressions: - eth: mlx5e: take state lock during tx timeout reporter - eth: mlxbf_gige: disable RX filters until RX path initialized - eth: igc: fix reset adapter logics when tx mode change Previous releases - always broken: - tcp: update window clamping condition - netfilter: - nf_queue: drop packets with cloned unconfirmed conntracks - nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests - vsock: fix recursive ->recvmsg calls - dsa: vsc73xx: fix MDIO bus access and PHY opera - eth: gtp: pull network headers in gtp_dev_xmit() - eth: igc: fix packet still tx after gate close by reducing i226 MAC retry buffer - eth: mana: fix RX buf alloc_size alignment and atomic op panic - eth: hns3: fix a deadlock problem when config TC during resetting" * tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: hns3: use correct release function during uninitialization net: hns3: void array out of bound when loop tnl_num net: hns3: fix a deadlock problem when config TC during resetting net: hns3: use the user's cfg after reset net: hns3: fix wrong use of semaphore up selftests: net: lib: kill PIDs before del netns pse-core: Conditionally set current limit during PI regulator registration net: thunder_bgx: Fix netdev structure allocation net: ethtool: Allow write mechanism of LPL and both LPL and EPL vsock: fix recursive ->recvmsg calls selftest: af_unix: Fix kselftest compilation warnings netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests netfilter: nf_tables: Introduce nf_tables_getobj_single netfilter: nf_tables: Audit log dump reset after the fact selftests: netfilter: add test for br_netfilter+conntrack+queue combination netfilter: nf_queue: drop packets with cloned unconfirmed conntracks netfilter: flowtable: initialise extack before use netfilter: nfnetlink: Initialise extack before use in ACKs netfilter: allow ipv6 fragments to arrive on different devices tcp: Update window clamping condition ...
2024-08-15Merge tag 'media/v6.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Two regression fixes: - fix atomisp support for ISP2400 - fix dvb-usb regression for TeVii s480 dual DVB-S2 S660 board" * tag 'media/v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: atomisp: Fix streaming no longer working on BYT / ISP2400 devices media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"
2024-08-15drm/msm/adreno: Fix error return if missing firmware-nameRob Clark
-ENODEV is used to signify that there is no zap shader for the platform, and the CPU can directly take the GPU out of secure mode. We want to use this return code when there is no zap-shader node. But not when there is, but without a firmware-name property. This case we want to treat as-if the needed fw is not found. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/604564/
2024-08-15Merge tag 'ata-6.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Niklas Cassel: - Revert a recent change to sense data generation. Sense data can be in either fixed format or descriptor format. The D_SENSE bit in the Control mode page controls which format to generate. All places but one respected the D_SENSE bit. The recent change fixed the one place that didn't respect the D_SENSE bit. However, it turns out that hdparm, hddtemp and udisks (incorrectly) assumes sense data in descriptor format. Therefore, even while the change was technically correct, revert it, since even if these user space programs are fixed to (correctly) look at the format type before parsing the data, older versions of these tools will be around roughly forever. * tag 'ata-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"
2024-08-15Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-inLuiz Augusto von Dentz
This inverts the LE State quirk so by default we assume the controllers would report valid states rather than invalid which is how quirks normally behave, also this would result in HCI command failing it the LE States are really broken thus exposing the controllers that are really broken in this respect. Link: https://github.com/bluez/bluez/issues/584 Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-15Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"Griffin Kroah-Hartman
This reverts commit bab2f5e8fd5d2f759db26b78d9db57412888f187. Joel reported that this commit breaks userspace and stops sensors in SDM845 from working. Also breaks other qcom SoC devices running postmarketOS. Cc: stable <stable@kernel.org> Cc: Ekansh Gupta <quic_ekangupt@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Link: https://lore.kernel.org/r/9a9f5646-a554-4b65-8122-d212bb665c81@umsystem.edu Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: bab2f5e8fd5d ("misc: fastrpc: Restrict untrusted app to attach to privileged PD") Link: https://lore.kernel.org/r/20240815094920.8242-1-griffin@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-15xhci: Fix Panther point NULL pointer deref at full-speed re-enumerationMathias Nyman
re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. Reported-by: Karel Balej <balejk@matfyz.cz> Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/ Cc: stable@vger.kernel.org Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-15drm/xe: Hold a PM ref when GT TLB invalidations are inflightMatthew Brost
Avoid GT TLB invalidation timeouts by holding a PM ref when invalidations are inflight. v2: - Drop PM ref before signaling fence (CI) v3: - Move invalidation_fence_signal helper in tlb timeout to previous patch (Matthew Auld) Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-4-matthew.brost@intel.com (cherry picked from commit 0a382f9bc5dc4744a33970a5ed4df8f9c702ee9e) Requires: 46209ce5287b ("drm/xe: Add xe_gt_tlb_invalidation_fence_init helper") Requires: 0e414ab036e0 ("drm/xe: Drop xe_gt_tlb_invalidation_wait") Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Drop xe_gt_tlb_invalidation_waitMatthew Brost
Having two methods to wait on GT TLB invalidations is not ideal. Remove xe_gt_tlb_invalidation_wait and only use GT TLB invalidation fences. In addition to two methods being less than ideal, once GT TLB invalidations are coalesced the seqno cannot be assigned during xe_gt_tlb_invalidation_ggtt/range. Thus xe_gt_tlb_invalidation_wait would not have a seqno to wait one. A fence however can be armed and later signaled. v3: - Add explaination about coalescing to commit message v4: - Don't put dma fence if defined on stack (CI) v5: - Initialize ret to zero (CI) v6: - Use invalidation_fence_signal helper in tlb timeout (Matthew Auld) Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-3-matthew.brost@intel.com (cherry picked from commit 61ac035361ae555ee5a17a7667fe96afdde3d59a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Add xe_gt_tlb_invalidation_fence_init helperMatthew Brost
Other layers should not be touching struct xe_gt_tlb_invalidation_fence directly, add helper for initialization. v2: - Add dma_fence_get and list init to xe_gt_tlb_invalidation_fence_init Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-2-matthew.brost@intel.com (cherry picked from commit a522b285c6b4b611406d59612a8d7241714d2e31) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe/pf: Fix VF config validation on multi-GT platformsMichal Wajdeczko
When validating VF config on the media GT, we may wrongly report that VF is already partially configured on it, as we consider GGTT and LMEM provisioning done on the primary GT (since both GGTT and LMEM are tile-level resources, not a GT-level). This will cause skipping a VF auto-provisioning on the media-GT and in result will block a VF from successfully initialize that GT. Fix that by considering GGTT and LMEM configurations only when checking if a VF provisioning is complete, and omit GGTT and LMEM when reporting empty/partial provisioning. Fixes: 234670cea9a2 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240806180516.618-1-michal.wajdeczko@intel.com (cherry picked from commit 5bdacb0907c1f531995b6ba47b832ac3a0182ae9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Build PM into GuC CT layerMatthew Brost
Take PM ref when any G2H are outstanding, drop when none are outstanding. To safely ensure we have PM ref when in the GuC CT layer, a PM ref needs to be held when scheduler messages are pending too. v2: - Add outer PM protections to xe_file_close (CI) v3: - Only take PM ref 0->1 and drop on 1->0 (Matthew Auld) v4: - Add assert to G2H increment function v5: - Rebase v6: - Declare xe as local variable in xe_file_close (CI) Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-5-matthew.brost@intel.com (cherry picked from commit d930c19fdff3109e97b610fa10943b7602efcabd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe/vf: Fix register value lookupMichal Wajdeczko
We should use the number of actual entries stored in the runtime register buffer, not the maximum number of entries that this buffer can hold, otherwise bsearch() may fail and we may miss the data and wrongly report unexpected access to some registers. Fixes: 4edadc41a3a4 ("drm/xe/vf: Use register values obtained from the PF") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718203155.486-1-michal.wajdeczko@intel.com (cherry picked from commit ad16682db18f4414e53bba1ce0db75b08bdc4dff) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Fix use after free when client stats are capturedUmesh Nerlige Ramappa
xe_file_close triggers an asynchronous queue cleanup and then frees up the xef object. Since queue cleanup flushes all pending jobs and the KMD stores client usage stats into the xef object after jobs are flushed, we see a use-after-free for the xef object. Resolve this by taking a reference to xef from xe_exec_queue. While at it, revert an earlier change that contained a partial work around for this issue. v2: - Take a ref to xef even for the VM bind queue (Matt) - Squash patches relevant to that fix and work around (Lucas) v3: Fix typo (Lucas) Fixes: ce62827bc294 ("drm/xe: Do not access xe file when updating exec queue run_ticks") Fixes: 6109f24f87d7 ("drm/xe: Add helper to accumulate exec queue runtime") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1908 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-5-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 2149ded63079449b8dddf9da38392632f155e6b5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Take a ref to xe file when user creates a VMUmesh Nerlige Ramappa
Take a reference to xef when user creates the VM and put the reference when user destroys the VM. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-4-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit a2387e69493df3de706f14e4573ee123d23d5d34) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Add ref counting for xe_fileUmesh Nerlige Ramappa
Add ref counting for xe_file. v2: - Add kernel doc for exported functions (Matt) - Instead of xe_file_destroy, export the get/put helpers (Lucas) v3: Fixup the kernel-doc format and description (Matt, Lucas) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-3-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit ce8c161cbad43f4056451e541f7ae3471d0cca12) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Move part of xe_file cleanup to a helperUmesh Nerlige Ramappa
In order to make xe_file ref counted, move destruction of xe_file members to a helper. v2: Move xe_vm_close_and_put back into xe_file_close (Matt) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-2-umesh.nerlige.ramappa@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 3d0c4a62cc553c6ffde4cb11620eba991e770665) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15drm/xe: Validate user fence during creationMatthew Brost
Fail invalid addresses during user fence creation. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717140429.1396820-1-matthew.brost@intel.com (cherry picked from commit 0fde907da2d5fd4da68845e96c6842497159c858) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-08-15net: hns3: use correct release function during uninitializationPeiyang Wang
pci_request_regions is called to apply for PCI I/O and memory resources when the driver is initialized, Therefore, when the driver is uninstalled, pci_release_regions should be used to release PCI I/O and memory resources instead of pci_release_mem_regions is used to release memory reasouces only. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: void array out of bound when loop tnl_numPeiyang Wang
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix a deadlock problem when config TC during resettingJie Wang
When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: use the user's cfg after resetPeiyang Wang
Consider the followed case that the user change speed and reset the net interface. Before the hw change speed successfully, the driver get old old speed from hw by timer task. After reset, the previous speed is config to hw. As a result, the new speed is configed successfully but lost after PF reset. The followed pictured shows more dirrectly. +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool -s 100G | | +------------------>| set speed 100G | | +--------------------->| | | set successfully | | |<---------------------+---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 200G | | changing event | ethtool --reset |<---------------------+ | (100G) +------------------>| cfg previous speed |<--+ | | after reset (200G) | | +--------------------->| | | +---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 100G | | changing event | |<---------------------+ | (200G) | | |<--+ | |query cfg (timer task)| | +--------------------->| | | return 200G | | |<---------------------+ | | | v v v This patch save new speed if hw change speed successfully, which will be used after reset successfully. Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix wrong use of semaphore upJie Wang
Currently, if hns3 PF or VF FLR reset failed after five times retry, the reset done process will directly release the semaphore which has already released in hclge_reset_prepare_general. This will cause down operation fail. So this patch fixes it by adding reset state judgement. The up operation is only called after successful PF FLR reset. Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR") Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15pse-core: Conditionally set current limit during PI regulator registrationOleksij Rempel
Fix an issue where `devm_regulator_register()` would fail for PSE controllers that do not support current limit control, such as simple GPIO-based controllers like the podl-pse-regulator. The `REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now conditionally set only if the `pi_set_current_limit` operation is supported. This change prevents the regulator registration routine from attempting to call `pse_pi_set_current_limit()`, which would return `-EOPNOTSUPP` and cause the registration to fail. Fixes: 4a83abcef5f4f ("net: pse-pd: Add new power limit get and set c33 features") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Kyle Swenson <kyle.swenson@est.tech> Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15pmdomain: imx: wait SSAR when i.MX93 power domain onPeng Fan
With "quiet" set in bootargs, there is power domain failure: "imx93_power_domain 44462400.power-domain: pd_off timeout: name: 44462400.power-domain, stat: 4" The current power on opertation takes ISO state as power on finished flag, but it is wrong. Before powering on operation really finishes, powering off comes and powering off will never finish because the last powering on still not finishes, so the following powering off actually not trigger hardware state machine to run. SSAR is the last step when powering on a domain, so need to wait SSAR done when powering on. Since EdgeLock Enclave(ELE) handshake is involved in the flow, enlarge the waiting time to 10ms for both on and off to avoid timeout. Cc: stable@vger.kernel.org Fixes: 0a0f7cc25d4a ("soc: imx: add i.MX93 SRC power domain driver") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240814124740.2778952-1-peng.fan@oss.nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-15drm/rockchip: inno-hdmi: Fix infoframe uploadAlex Bee
HDMI analyser shows that the AVI infoframe is no being longer send. The switch to the HDMI connector api should have used the frame content which is now given in the buffer parameter, but instead still uses the (now) empty and superfluous packed_frame variable. Fix it. Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector") Signed-off-by: Alex Bee <knaerzche@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240805110855.274140-2-knaerzche@gmail.com
2024-08-15net: thunder_bgx: Fix netdev structure allocationMarc Zyngier
Commit 94833addfaba ("net: thunderx: Unembed netdev structure") had a go at dynamically allocating the netdev structures for the thunderx_bgx driver. This change results in my ThunderX box catching fire (to be fair, it is what it does best). The issues with this change are that: - bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and bgx_init_of_phy(), both expecting netdev to be a valid pointer. - bgx_init_of_phy() populates the MAC addresses for *all* LMACs attached to a given BGX instance, and thus needs netdev for each of them to have been allocated. There is a few things to be said about how the driver mixes LMAC and BGX states which leads to this sorry state, but that's beside the point. To address this, go back to a situation where all netdev structures are allocated before the driver starts relying on them, and move the freeing of these structures to driver removal. Someone brave enough can always go and restructure the driver if they want. Fixes: 94833addfaba ("net: thunderx: Unembed netdev structure") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15Revert "serial: 8250_omap: Set the console genpd always on if no console ↵Griffin Kroah-Hartman
suspend" This reverts commit 68e6939ea9ec3d6579eadeab16060339cdeaf940. Kevin reported that this causes a crash during suspend on platforms that dont use PM domains. Link: https://lore.kernel.org/r/7ha5hgpchq.fsf@baylibre.com Cc: Thomas Richard <thomas.richard@bootlin.com> Fixes: 68e6939ea9ec ("serial: 8250_omap: Set the console genpd always on if no console suspend") Cc: stable <stable@kernel.org> Reported-by: Kevin Hilman <khilman@kernel.org> Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com> Link: https://lore.kernel.org/r/20240814111747.82371-1-griffin@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14Merge tag 'wireless-2024-08-14' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.11 We have few fixes to drivers. The most important here is a fix for iwlwifi which caused major slowdowns for several users. * tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: correctly lookup DMA address in SG table wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850 ==================== Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-14firmware: qcom: tzmem: fix virtual-to-physical address conversionBartosz Golaszewski
We currently only correctly convert the virtual address passed by the caller to qcom_tzmem_to_phys() if it corresponds to the base address of the chunk. If the user wants to convert some pointer at an offset relative to that base address, we'll return 0. Let's change the implementation of qcom_tzmem_to_phys(): iterate over the chunks and try to call gen_pool_virt_to_phys() just-in-time instead of trying to call it only once when creating the chunk. Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator") Reported-by: Johan Hovold <johan+linaro@kernel.org> Closes: https://lore.kernel.org/lkml/20240729095542.21097-1-johan+linaro@kernel.org/ Acked-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20240731-tzmem-efivars-fix-v2-1-f0e84071ec07@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14firmware: qcom: scm: Mark get_wq_ctx() as atomic callMurali Nalajala
Currently get_wq_ctx() is wrongly configured as a standard call. When two SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to resume the corresponding sleeping thread. But if get_wq_ctx() is interrupted, goes to sleep and another SMC call is waiting to be allocated a waitq context, it leads to a deadlock. To avoid this get_wq_ctx() must be an atomic call and can't be a standard SMC call. Hence mark get_wq_ctx() as a fast call. Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic") Cc: stable@vger.kernel.org Signed-off-by: Murali Nalajala <quic_mnalajal@quicinc.com> Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com> Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Link: https://lore.kernel.org/r/20240814223244.40081-1-quic_uchalich@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-15i2c: tegra: Do not mark ACPI devices as irq safeBreno Leitao
On ACPI machines, the tegra i2c module encounters an issue due to a mutex being called inside a spinlock. This leads to the following bug: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 ... Call trace: __might_sleep __mutex_lock_common mutex_lock_nested acpi_subsys_runtime_resume rpm_resume tegra_i2c_xfer The problem arises because during __pm_runtime_resume(), the spinlock &dev->power.lock is acquired before rpm_resume() is called. Later, rpm_resume() invokes acpi_subsys_runtime_resume(), which relies on mutexes, triggering the error. To address this issue, devices on ACPI are now marked as not IRQ-safe, considering the dependency of acpi_subsys_runtime_resume() on mutexes. Fixes: bd2fdedbf2ba ("i2c: tegra: Add the ACPI support") Cc: <stable@vger.kernel.org> # v5.17+ Co-developed-by: Michael van der Westhuizen <rmikey@meta.com> Signed-off-by: Michael van der Westhuizen <rmikey@meta.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-08-14spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resumeVignesh Raghavendra
Its necessary to call pm_runtime_force_*() hooks as part of system suspend/resume calls so that the runtime_pm hooks get called. This ensures latest state of the IP is cached and restored during system sleep. This is especially true if runtime autosuspend is enabled as runtime suspend hooks may not be called at all before system sleeps. Without this patch, OSPI NOR enumeration (READ_ID) fails during resume as context saved during suspend path is inconsistent. Fixes: 078d62de433b ("spi: cadence-qspi: add system-wide suspend and resume callbacks") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://patch.msgid.link/20240814151237.3856184-1-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-08-14Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"Niklas Cassel
This reverts commit 28ab9769117ca944cb6eb537af5599aa436287a4. Sense data can be in either fixed format or descriptor format. SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit: "The SATL shall support this bit as defined in SPC-5 with the following exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense data), then the SATL should return fixed format sense data for ATA PASS-THROUGH commands." The libata SATL has always kept D_SENSE set to zero by default. (It is however possible to change the value using a MODE SELECT SG_IO command.) Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit, however, successful ATA PASS-THROUGH commands incorrectly returned the sense data in descriptor format (regardless of the D_SENSE bit). Commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH commands. However, after commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"), there were bug reports that hdparm, hddtemp, and udisks were no longer working as expected. These applications incorrectly assume the returned sense data is in descriptor format, without even looking at the RESPONSE CODE field in the returned sense data (to see which format the returned sense data is in). Considering that there will be broken versions of these applications around roughly forever, we are stuck with being bug compatible with older kernels. Cc: stable@vger.kernel.org # 4.19+ Reported-by: Stephan Eisvogel <eisvogel@seitics.de> Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/ Fixes: 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-08-14media: atomisp: Fix streaming no longer working on BYT / ISP2400 devicesHans de Goede
Commit a0821ca14bb8 ("media: atomisp: Remove test pattern generator (TPG) support") broke BYT support because it removed a seemingly unused field from struct sh_css_sp_config and a seemingly unused value from enum ia_css_input_mode. But these are part of the ABI between the kernel and firmware on ISP2400 and this part of the TPG support removal changes broke ISP2400 support. ISP2401 support was not affected because on ISP2401 only a part of struct sh_css_sp_config is used. Restore the removed field and enum value to fix this. Fixes: a0821ca14bb8 ("media: atomisp: Remove test pattern generator (TPG) support") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-14i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resumeAndi Shyti
Add the missing geni_icc_disable() call before returning in the geni_i2c_runtime_resume() function. Commit 9ba48db9f77c ("i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume") by Gaosheng missed disabling the interconnect in one case. Fixes: bf225ed357c6 ("i2c: i2c-qcom-geni: Add interconnect support") Cc: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-08-13of/irq: Prevent device address out-of-bounds read in interrupt map walkStefan Wiehler
When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size. Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com> Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-08-13drm/msm: fix the highest_bank_bit for sc7180Abhinav Kumar
sc7180 programs the ubwc settings as 0x1e as that would mean a highest bank bit of 14 which matches what the GPU sets as well. However, the highest_bank_bit field of the msm_mdss_data which is being used to program the SSPP's fetch configuration is programmed to a highest bank bit of 16 as 0x3 translates to 16 and not 14. Fix the highest bank bit field used for the SSPP to match the mdss and gpu settings. Fixes: 6f410b246209 ("drm/msm/mdss: populate missing data") Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Stephen Boyd <swboyd@chromium.org> # Trogdor.Lazor Patchwork: https://patchwork.freedesktop.org/patch/607625/ Link: https://lore.kernel.org/r/20240808235227.2701479-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-08-13dm persistent data: fix memory allocation failureMikulas Patocka
kmalloc is unreliable when allocating more than 8 pages of memory. It may fail when there is plenty of free memory but the memory is fragmented. Zdenek Kabelac observed such failure in his tests. This commit changes kmalloc to kvmalloc - kvmalloc will fall back to vmalloc if the large allocation fails. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Cc: stable@vger.kernel.org
2024-08-13drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1Kenneth Feng
add HDP_SD support on gc 12.0.0/1 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 61cffacb3a1c590b15c0e9ff987de02d293e0dd8)
2024-08-13drm/amdgpu: Update kmd_fw_shared for VCN5Yinjie Yao
kmd_fw_shared changed in VCN5 Signed-off-by: Yinjie Yao <yinjie.yao@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit aa02486fb18cecbaca0c4fd393d1a03f1d4c3f9a)
2024-08-13drm/amd/amdgpu: command submission parser for JPEGDavid (Ming Qiang) Wu
Add JPEG IB command parser to ensure registers in the command are within the JPEG IP block. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a7f670d5d8e77b092404ca8a35bb0f8f89ed3117) Cc: stable@vger.kernel.org
2024-08-13drm/amdgpu/mes12: fix suspend issueJack Xiao
Use mes pipe to unmap kcq and kgq. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f7fb9d677faf0460131bc2af15afd766d48a1f47)
2024-08-13drm/amdgpu/mes12: sw/hw fini for unified mesJack Xiao
Free memory for two pipes and unmap pipe0 via pipe1. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 98cae695a8ae0e4291b1fa7feef9b54fabefe885)
2024-08-13drm/amdgpu/mes12: configure two pipes hardware resourcesJack Xiao
Configure two pipes with different hardware resources. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ea5d6db17a8e3635ad91e8c53faa1fdc9570fbbb)
2024-08-13drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipesJack Xiao
Adjust mes12 sw/hw initiailization for both pipe0 and pipe1 enablement. The two pipes are almost identical pipe. Pipe0 behaves like schq and pipe1 like kiq, pipe0 was mapped by pipe1. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit aa539da8aff07ab08def6490e8c9b441439e70ba)
2024-08-13drm/amdgpu/mes12: add mes pipe switch supportJack Xiao
Add mes pipe switch to let caller choose pipe to submit packet. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b2dee0837a4be63e8d3e00550a9f057644f962c4)
2024-08-13drm/amdgpu/mes12: load unified mes fw on pipe0 and pipe1Jack Xiao
Enable unified mes firmware to load on pipe0 and pipe1. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e69c2dd7534f3fcabf7bb801db2a7ac71e7e5da6)
2024-08-13drm/amdgpu/mes: add multiple mes ring instances supportJack Xiao
Add multiple mes ring instances in mes structure to support multiple mes pipes. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c7d4355648ffa02a1551495b05c71ea6c884d29c)
2024-08-13drm/amdgpu/mes12: update mes_v12_api_def.hJack Xiao
Update mes12 api definition. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2ab5dc59177419d8a49e89585e82ff41524270fc)
generated by cgit (git 2.34.1) at 2025-09-11 17:30:55 +0000