| Age | Commit message (Collapse) | Author |
|---|
|
The function returns with the ppm_lock held if the PPM is
busy or there's an error.
Reported-and-tested-by: Luciano Coelho <luciano.coelho@intel.com>
Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reported-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20240806112029.2984319-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
source capability message
Since commit (122968f8dda8 usb: typec: tcpm: avoid resets for missing
source capability messages), state will change from SNK_WAIT_CAPABILITIES
to SNK_WAIT_CAPABILITIES_TIMEOUT. We need to change SNK_WAIT_CAPABILITIES
-> SNK_READY path to SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_READY
accordingly. Otherwise, the sink port will never change to SNK_READY state
if the source does't have PD capability.
[ 503.547183] pending state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT @ 310 ms [rev3 NONE_AMS]
[ 503.857239] state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT [delayed 310 ms]
[ 503.857254] PD TX, header: 0x87
[ 503.862440] PD TX complete, status: 2
[ 503.862484] state change SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_UNATTACHED [rev3 NONE_AMS]
Fixes: 122968f8dda8 ("usb: typec: tcpm: avoid resets for missing source capability messages")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20240802064156.1846768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ``alt`` parameter was used as a way to differentiate between
f->disable() and f->set_alt(). As the code paths diverge quite a bit,
pull out the f->disable() code from ffs_func_set_alt(), everything will
become clearer and less error prone. No change in functionality
intended.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-3-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The blamed commit made ffs_func_disable() always return -EINVAL as the
method calls ffs_func_set_alt() with the ``alt`` argument being
``(unsigned)-1``, which is always greater than MAX_ALT_SETTINGS.
Use the MAX_ALT_SETTINGS check just in the f->set_alt() code path,
f->disable() doesn't care about the ``alt`` parameter.
Make a surgical fix, but really the f->disable() code shall be pulled
out from ffs_func_set_alt(), the code will become clearer. A patch will
follow.
Note that ffs_func_disable() always returning -EINVAL made pixel6 crash
on USB disconnect.
Fixes: 2f550553e23c ("usb: gadget: f_fs: Add the missing get_alt callback")
Cc: stable <stable@kernel.org>
Reported-by: William McVicker <willmcvicker@google.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fix for 6.11-rc2
Here's a fix for an issue when using the usb_debug driver with Xen.
This change has been in linux-next for a couple of days with no reported
issues.
* tag 'usb-serial-6.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: debug: do not echo input by default
|
|
In commit a78a8da51b36 ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-3-david@davidgow.net
(cherry picked from commit 92653f2a572505adaf7f13f695c1907e71a1dc84)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In commit a78a8da51b36 ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b36 ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c3753 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-2-david@davidgow.net
(cherry picked from commit 54bf0af90844fbf18f5be3272eda69198dfdb622)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=6f345e48
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the missing geni_icc_disable() before return in
geni_i2c_runtime_resume().
Fixes: bf225ed357c6 ("i2c: i2c-qcom-geni: Add interconnect support")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
User-space is allowed to submit any property in an async flip as
long as the value doesn't change. However we missed one case:
as things stand, the kernel rejects no-op FB_ID changes on
non-primary planes. Fix this by changing the conditional and
skipping drm_atomic_check_prop_changes() only for FB_ID on the
primary plane (instead of skipping for FB_ID on any plane).
Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731191014.878320-1-contact@emersion.fr
|
|
Pull virtio fix from Michael Tsirkin:
"Fix a single, long-standing issue with kick pass-through vdpa"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- Fix ACPI notifier racing with itself (intel-vbtn)
- Initialize local variable to cover a timeout corner case
(intel/ifs)
- WMI docs spelling
New device IDs:
- amd/{pmc,pmf}: AMD 1Ah model 60h series.
- amd/pmf: SPS quirk support for ASUS ROG Ally X"
* tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Initialize union ifs_status to zero
platform/x86: msi-wmi-platform: Fix spelling mistakes
platform/x86/amd/pmf: Add new ACPI ID AMDI0107
platform/x86/amd/pmc: Send OS_HINT command for new AMD platform
platform/x86/amd: pmf: Add quirk for ROG Ally X
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
|
|
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com
(cherry picked from commit 60a2066c50058086510c91f404eb582029650970)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
When a reference counter is at zero and refcount_sub_and_test() is invoked
to subtract zero, the function accepts this request without any warning and
returns true. This behavior does not seem ideal because the counter being
already at zero indicates a use-after-free. Furthermore, returning true by
refcount_sub_and_test() in this case potentially results in a double-free
done by its caller.
Modify the underlying function __refcount_sub_and_test() to warn about this
case as a use-after-free and have it return false to avoid the potential
double-free.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240717130023.5675-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Take into account the plane rotation and flipping when calculating src
positions for the wide plane parts.
This is not an issue yet, because rotation is only supported for the
UBWC planes and wide UBWC planes are rejected anyway because in parallel
multirect case only the half of the usual width is supported for tiled
formats. However it's better to fix this now rather than stumbling upon
it later.
Fixes: 80e8ae3b38ab ("drm/msm/dpu: add support for wide planes")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601059/
Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-3-5efb90cbb8be@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
YUV formats require only CSC to be enabled. Even decimated formats
should not require scaler. Relax the requirement and don't check for the
scaler block while checking if YUV format can be enabled.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/601049/
Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-2-5efb90cbb8be@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The QCM2290 doesn't have CSC blocks, so it can not support YUV formats
even on ViG blocks. Fix the formats declared by _VIG_SBLK_NOSCALE().
Fixes: 5334087ee743 ("drm/msm: add support for QCM2290 MDSS")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/601048/
Link: https://lore.kernel.org/r/20240627-dpu-virtual-wide-v5-1-5efb90cbb8be@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
If the dpu_format_populate_layout() fails, then FB is prepared, but not
cleaned up. This ends up leaking the pin_count on the GEM object and
causes a splat during DRM file closure:
msm_obj->pin_count
WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc
[...]
Call trace:
update_lru_locked+0xc4/0xcc
put_pages+0xac/0x100
msm_gem_free_object+0x138/0x180
drm_gem_object_free+0x1c/0x30
drm_gem_object_handle_put_unlocked+0x108/0x10c
drm_gem_object_release_handle+0x58/0x70
idr_for_each+0x68/0xec
drm_gem_release+0x28/0x40
drm_file_free+0x174/0x234
drm_release+0xb0/0x160
__fput+0xc0/0x2c8
__fput_sync+0x50/0x5c
__arm64_sys_close+0x38/0x7c
invoke_syscall+0x48/0x118
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x120
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
irq event stamp: 129818
hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124
hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c
softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8
softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/600714/
Link: https://lore.kernel.org/r/20240625-dpu-mode-config-width-v5-1-501d984d634f@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Before re-starting link training reset the link phy params namely
the pre-emphasis and voltage swing levels otherwise the next
link training begins at the previously cached levels which can result
in link training failures.
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/605946/
Link: https://lore.kernel.org/r/20240725220450.131245-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
For cases where the crtc's connectors_changed was set without enable/active
getting toggled , there is an atomic_enable() call followed by an
atomic_disable() but without an atomic_mode_set().
This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in
the atomic_enable() as the dpu_encoder's connector was cleared in the
atomic_disable() but not re-assigned as there was no atomic_mode_set() call.
Fix the NULL ptr access by moving the assignment for atomic_enable() and also
use drm_atomic_get_new_connector_for_encoder() to get the connector from
the atomic_state.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/59
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Patchwork: https://patchwork.freedesktop.org/patch/606729/
Link: https://lore.kernel.org/r/20240731191723.3050932-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Fix the dp_panel_get_supported_bpp() API to return the minimum
supported bpp correctly for relevant cases and use this API
to correct the behavior of DP driver which hard-codes the max supported
bpp to 30.
This is incorrect because the number of lanes and max data rate
supported by the lanes need to be taken into account.
Replace the hardcoded limit with the appropriate math which accounts
for the accurate number of lanes and max data rate.
changes in v2:
- Fix the dp_panel_get_supported_bpp() and use it
- Drop the max_t usage as dp_panel_get_supported_bpp() already
returns the min_bpp correctly now
changes in v3:
- replace min_t with just min as all params are u32
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/43
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/607073/
Link: https://lore.kernel.org/r/20240805202009.1120981-1-quic_abhinavk@quicinc.com
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
DPU debugging macros need to be converted to a proper drm_debug_*
macros, however this is a going an intrusive patch, not suitable for a
fix. Wire DPU_DEBUG and DPU_DEBUG_DRIVER to always use DRM_DEBUG_DRIVER
to make sure that DPU debugging messages always end up in the drm debug
messages and are controlled via the usual drm.debug mask.
I don't think that it is a good idea for a generic DPU_DEBUG macro to be
tied to DRM_UT_KMS. It is used to report a debug message from driver, so by
default it should go to the DRM_UT_DRIVER channel. While refactoring
debug macros later on we might end up with particular messages going to
ATOMIC or KMS, but DRIVER should be the default.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606932/
Link: https://lore.kernel.org/r/20240802-dpu-fix-wb-v2-2-7eac9eb8e895@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
With the new __counted_by annotation, the "lli_size" variable needs to
valid for accesses to the "lli" array. This requirement is not met in
stm32_dma3_chan_desc_alloc(), since "lli_size" starts at "0", so "lli"
index "0" will not be considered valid during the initialization for loop.
Fix this by setting lli_size immediately after allocation (similar to
how this is handled in stm32_mdma_alloc_desc() for the node/count
relationship).
Fixes: f561ec8b2b33 ("dmaengine: Add STM32 DMA3 support")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716213830.work.951-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
With the new __counted_by annocation, the "sglen" struct member must
be set before accessing the "sg" array. This initialization was done in
other places where a new struct omap_desc is allocated, but these cases
were missed. Set "sglen" after allocation.
Fixes: b85178611c11 ("dmaengine: ti: omap-dma: Annotate struct omap_desc with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716215702.work.802-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently there are two names utilized in the driver to keep the functions
call status: ret and err. For the sake of unification convert to using the
first version only.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-7-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to have a more coherent DW AHB DMA slave configuration method -
dwc_config() - let's simplify the source and destination channel max-burst
calculation procedure:
1. Create the max-burst verification method as it has been just done for
the memory and peripheral address widths. Thus the dwc_config() method
will turn to a set of the verification methods execution.
2. Since both the generic DW AHB DMA and Intel iDMA 32-bit engines support
the power-of-2 bursts only, then the specified by the client driver
max-burst values can be converted to being power-of-2 right in the
max-burst verification method.
3. Since max-burst encoded value is required on the CTL_LO fields
calculation stage, the encode_maxburst() callback can be easily dropped
from the dw_dma structure meanwhile the encoding procedure will be
executed right in the CTL_LO register value calculation.
Thus the update will provide the next positive effects: the internal
DMA-slave config structure will contain only the real DMA-transfer config
values, which will be encoded to the DMA-controller register fields only
when it's required on the buffer mapping; the redundant encode_maxburst()
callback will be dropped simplifying the internal HW-abstraction API;
dwc_config() will look more readable executing the verification functions
one-by-one.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-6-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
As a preparatory change before dropping the encode_maxburst() callbacks
let's move dw_dma_encode_maxburst() and idma32_encode_maxburst() to being
defined above the dw_dma_prepare_ctllo() and idma32_prepare_ctllo()
methods respectively. That's required since the former methods will be
called from the later ones directly.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-5-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the CTL LO fields are calculated on the platform-specific basis.
It's implemented by means of the prepare_ctllo() callbacks using the
ternary operator within the local variables init block at the beginning of
the block scope. The functions code currently is relatively hard to
comprehend and isn't that optimal since implies four conditional
statements executed and two additional local variables defined. Let's
simplify the DW AHB DMA prepare_ctllo() method by unrolling the ternary
operators into the normal if-else statement, dropping redundant
master-interface ID variables and initializing the local variables based
on the singly evaluated DMA-transfer direction check. Thus the method will
look much more readable since now the fields content can be easily
inferred right from the if-else branch. Provide the same update in the
Intel DMA32 core driver for the sake of the driver code unification.
Note besides of the effects described above this update is basically a
preparation before dropping the max burst encoding callback. The dropping
will require to call the burst fields calculation methods right in the
prepare_ctllo() callbacks. It would have made the later functions code
even more complex should they were left in the original state.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-4-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently in case of the DEV_TO_MEM or MEM_TO_DEV DMA transfers the memory
data width (single transfer width) is determined based on the buffer
length, buffer base address or DMA master-channel max address width
capability. It isn't enough in case of the channel disabling prior the
block transfer is finished. Here is what DW AHB DMA IP-core databook says
regarding the port suspension (DMA-transfer pause) implementation in the
controller:
"When CTLx.SRC_TR_WIDTH < CTLx.DST_TR_WIDTH and the CFGx.CH_SUSP bit is
high, the CFGx.FIFO_EMPTY is asserted once the contents of the FIFO do not
permit a single word of CTLx.DST_TR_WIDTH to be formed. However, there may
still be data in the channel FIFO, but not enough to form a single
transfer of CTLx.DST_TR_WIDTH. In this scenario, once the channel is
disabled, the remaining data in the channel FIFO is not transferred to the
destination peripheral."
So in case if the port gets to be suspended and then disabled it's
possible to have the data silently discarded even though the controller
reported that FIFO is empty and the CTLx.BLOCK_TS indicated the dropped
data already received from the source device. This looks as if the data
somehow got lost on a way from the peripheral device to memory and causes
problems for instance in the DW APB UART driver, which pauses and disables
the DMA-transfer as soon as the recv data timeout happens. Here is the way
it looks:
Memory <------- DMA FIFO <------ UART FIFO <---------------- UART
DST_TR_WIDTH -+--------| | |
| | | | No more data
Current lvl -+--------| |---------+- DMA-burst lvl
| | |---------+- Leftover data
| | |---------+- SRC_TR_WIDTH
-+--------+-------+---------+
In the example above: no more data is getting received over the UART port
and BLOCK_TS is not even close to be fully received; some data is left in
the UART FIFO, but not enough to perform a bursted DMA-xfer to the DMA
FIFO; some data is left in the DMA FIFO, but not enough to be passed
further to the system memory in a single transfer. In this situation the
8250 UART driver catches the recv timeout interrupt, pauses the
DMA-transfer and terminates it completely, after which the IRQ handler
manually fetches the leftover data from the UART FIFO into the
recv-buffer. But since the DMA-channel has been disabled with the data
left in the DMA FIFO, that data will be just discarded and the recv-buffer
will have a gap of the "current lvl" size in the recv-buffer at the tail
of the lately received data portion. So the data will be lost just due to
the misconfigured DMA transfer.
Note this is only relevant for the case of the transfer suspension and
_disabling_. No problem will happen if the transfer will be re-enabled
afterwards or the block transfer is fully completed. In the later case the
"FIFO flush mode" will be executed at the transfer final stage in order to
push out the data left in the DMA FIFO.
In order to fix the denoted problem the DW AHB DMA-engine driver needs to
make sure that the _bursted_ source transfer width is greater or equal to
the single destination transfer (note the HW databook describes more
strict constraint than actually required). Since the peripheral-device
side is prescribed by the client driver logic, the memory-side can be only
used for that. The solution can be easily implemented for the DEV_TO_MEM
transfers just by adjusting the memory-channel address width. Sadly it's
not that easy for the MEM_TO_DEV transfers since the mem-to-dma burst size
is normally dynamically determined by the controller. So the only thing
that can be done is to make sure that memory-side address width is greater
than the peripheral device address width.
Fixes: a09820043c9e ("dw_dmac: autoconfigure data_width or get it via platform data")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-3-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently the src_addr_width and dst_addr_width fields of the
dma_slave_config structure are mapped to the CTLx.SRC_TR_WIDTH and
CTLx.DST_TR_WIDTH fields of the peripheral bus side in order to have the
properly aligned data passed to the target device. It's done just by
converting the passed peripheral bus width to the encoded value using the
__ffs() function. This implementation has several problematic sides:
1. __ffs() is undefined if no bit exist in the passed value. Thus if the
specified addr-width is DMA_SLAVE_BUSWIDTH_UNDEFINED, __ffs() may return
unexpected value depending on the platform-specific implementation.
2. DW AHB DMA-engine permits having the power-of-2 transfer width limited
by the DMAH_Mk_HDATA_WIDTH IP-core synthesize parameter. Specifying
bus-width out of that constraints scope will definitely cause unexpected
result since the destination reg will be only partly touched than the
client driver implied.
Let's fix all of that by adding the peripheral bus width verification
method and calling it in dwc_config() which is supposed to be executed
before preparing any transfer. The new method will make sure that the
passed source or destination address width is valid and if undefined then
the driver will just fallback to the 1-byte width transfer.
Fixes: 029a40e97d0d ("dmaengine: dw: provide DMA capabilities")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-2-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the missing clk_disable_unprepare() before return in
geni_i2c_runtime_resume().
Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not
happening after the resume. This is because serdes registers are reset
when FPD is off (in suspend state) and needs to be reprogrammed in the
resume path with the same default initialization as done in the first
stage bootloader psu_init routine.
To address the failure introduce a set of serdes registers to be saved in
the suspend path and then restore it on resume.
Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The recent switch to drmm allocation in drm_bridge_connector_init() may
cause double free on bridge_connector in some of the error handling
paths.
Drop the explicit kfree() calls on bridge_connector.
Fixes: c12907be57b1 ("drm/bridge-connector: switch to using drmm allocations")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: default avatarRobert Foss <rfoss@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-bridge-connector-fix-dbl-free-v1-1-d558b2d0eb93@collabora.com
|
|
Hardware-speaking, there is no feature-reduced cursor specific
plane, so this driver reserves the last all Overlay plane as a
Cursor plane, but sets the maximum cursor width/height to the
maximum value that the full overlay plane can use.
While this could be ok, it raises issues with common userspace
using libdrm (especially Mutter, but other compositors too) which
will crash upon performing allocations and/or using said cursor
plane.
Reduce the maximum width/height for the cursor to 512x512 pixels,
value taken from IGT's maximum cursor size test, which succeeds.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240718082410.204459-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Compile-testing with CONFIG_MMU disabled causes a link error in omapdrm:
arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault_2d':
omap_gem.c:(.text+0x36e): undefined reference to `vmf_insert_mixed'
arm-linux-gnueabi-ld: drivers/gpu/drm/omapdrm/omap_gem.o: in function `omap_gem_fault':
omap_gem.c:(.text+0x74a): undefined reference to `vmf_insert_mixed'
Avoid this by adding a Kconfig dependency.
Fixes: dc6fcaaba5a5 ("drm/omap: Allow build with COMPILE_TEST=y")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719095942.3841009-1-arnd@kernel.org
|
|
These clocks are already added to the list. Remove the duplicates ones.
Fixes: a67d780720ff ("genpd: imx: scu-pd: add more PDs")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240717080334.2210988-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Free the unused skb when not ip packets arrive.
Fixes: c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't break the resize action if the vq coalescing feature
named VIRTIO_NET_F_VQ_NOTF_COAL is not negotiated.
Fixes: f61fe5f081cf ("virtio-net: fix the vq coalescing setting for vq resize")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Eugenio Pé rez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Virtio spec says:
The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL
feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET
and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET.
So we add the feature negotiation check to
virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On the PCH side the second PPS was introduced in ICP+.Add condition
On MTL_PCH and greater platform also having the second PPS.
Note that DG1/2 south block only has the single PPS, so need
to exclude the fake DG1/2 PCHs
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488
Fixes: 93cbc1accbce ("drm/i915/mtl: Add fake PCH for Meteor Lake")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801111141.574854-1-dnyaneshwar.bhadane@intel.com
(cherry picked from commit da1878b61c8d480c361ba6a39ce8a31c80b65826)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In transmit path, it is likely that the iova is not aligned to PCIe TLP
max payload size, which is 128 for WCN7850. Normally in such cases hardware
is expected to split the packet into several parts in a manner such that
they, other than the first one, have aligned iova. However due to hardware
limitations, WCN7850 does not behave like that properly with some specific
unaligned iova in transmit path. This easily results in target hang in a
KPI transmit test: packet send/receive failure, WMI command send timeout
etc. Also fatal error seen in PCIe level:
...
Capabilities: ...
...
DevSta: ... FatalErr+ ...
...
...
Work around this by manually moving/reallocating payload buffer such that
we can map it to a 128 bytes aligned iova. The moving requires sufficient
head room or tail room in skb: for the former we can do ourselves a favor
by asking some extra bytes when registering with mac80211, while for the
latter we can do nothing.
Moving/reallocating buffer consumes additional CPU cycles, but the good news
is that an aligned iova increases PCIe efficiency. In my tests on some X86
platforms the KPI results are almost consistent.
Since this is seen only with WCN7850, add a new hardware parameter to
differentiate from others.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Cc: <stable@vger.kernel.org>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240715023814.20242-1-quic_bqiang@quicinc.com
|
|
The current map seems to be out of sync (and includes a duplicate entry
for GPIO193..).
Replace it with the map present in shipping devices' ACPI tables.
This new one seems more complete, as it e.g. contains GPIO145 (PCIE6a
WAKE#)
Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/20240711-topic-x1e_pdc_tlmm-v1-1-e278b249d793@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver supports the FT8201 chip as well. It registers up to 10 touch
points.
Tested on: Lenovo ThinkSmart View (CD-18781Y), LCM: BOE TV080WXM-LL4
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240804031310.331871-3-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Return negative -ENOMEM instead of positive ENOMEM.
Fixes: 497ddafe915e ("phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/a956a3e2-c6ce-4f07-ad80-ec8a96e00d16@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to fsl,imx8mq-usb-phy.yaml, this tuning parameter should be
fsl,phy-pcs-tx-deemph-3p5db-attenuation-db.
Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240801124642.1152838-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update the PCIe Gen4 PHY init sequence with the latest based on internal
Qualcomm documentation.
Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240801-x1e80100-phy-qmp-pcie-fix-config-v2-1-cdc0f22b4169@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
