| Age | Commit message (Collapse) | Author |
|---|
|
The bspec is confusing on the nature of the upper 32bits of the LRC
descriptor. Once upon a time, it said that it uses the upper 32b to
decide if it should perform a lite-restore, and so we must ensure that
each unique context submitted to HW is given a unique CCID [for the
duration of it being on the HW]. Currently, this is achieved by using
a small circular tag, and assigning every context submitted to HW a
new id. However, this tag is being cleared on repinning an inflight
context such that we end up re-using the 0 tag for multiple contexts.
To avoid accidentally clearing the CCID in the upper 32bits of the LRC
descriptor, split the descriptor into two dwords so we can update the
GGTT address separately from the CCID.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1796
Fixes: 2935ed5339c4 ("drm/i915: Remove logical HW ID")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428184751.11257-1-chris@chris-wilson.co.uk
(cherry picked from commit 2632f174a2e1a5fd40a70404fa8ccfd0b1f79ebd)
(cherry picked from commit a4b70fcc587860f4b972f68217d8ebebe295ec15)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since moving the obj->vma.list to a spin_lock, and the vm->bound_list to
its vm->mutex, along with tracking shrinkable status under its own
spinlock, we no long require the object to be locked by the caller.
This is fortunate as it appears we can be called with the lock along an
error path in flipping:
<4> [139.942851] WARN_ON(debug_locks && !lock_is_held(&(&((obj)->base.resv)->lock.base)->dep_map))
<4> [139.943242] WARNING: CPU: 0 PID: 1203 at drivers/gpu/drm/i915/gem/i915_gem_domain.c:405 i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943263] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core r8169 lpc_ich snd_pcm realtek prime_numbers [last unloaded: i915]
<4> [139.943347] CPU: 0 PID: 1203 Comm: kms_flip Tainted: G U 5.6.0-gd0fda5c2cf3f1-drmtip_474+ #1
<4> [139.943363] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<4> [139.943589] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x70/0x130 [i915]
<4> [139.943589] Code: 85 28 01 00 00 be ff ff ff ff 48 8d 78 60 e8 d7 9b f0 e2 85 c0 75 b9 48 c7 c6 50 b9 38 c0 48 c7 c7 e9 48 3c c0 e8 20 d4 e9 e2 <0f> 0b eb a2 48 c7 c1 08 bb 38 c0 ba 0a 01 00 00 48 c7 c6 88 a3 35
<4> [139.943589] RSP: 0018:ffffb774c0603b48 EFLAGS: 00010282
<4> [139.943589] RAX: 0000000000000000 RBX: ffff9a142fa36e80 RCX: 0000000000000006
<4> [139.943589] RDX: 000000000000160d RSI: ffff9a142c1a88f8 RDI: ffffffffa434a64d
<4> [139.943589] RBP: ffff9a1410a513c0 R08: ffff9a142c1a88f8 R09: 0000000000000000
<4> [139.943589] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9a1436ee94b8
<4> [139.943589] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff9a1410960000
<4> [139.943589] FS: 00007fc73a744e40(0000) GS:ffff9a143da00000(0000) knlGS:0000000000000000
<4> [139.943589] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [139.943589] CR2: 00007fc73997e098 CR3: 000000002f5fe000 CR4: 00000000000006f0
<4> [139.943589] Call Trace:
<4> [139.943589] intel_pin_and_fence_fb_obj+0x1c9/0x1f0 [i915]
<4> [139.943589] intel_plane_pin_fb+0x3f/0xd0 [i915]
<4> [139.943589] intel_prepare_plane_fb+0x13b/0x5c0 [i915]
<4> [139.943589] drm_atomic_helper_prepare_planes+0x85/0x110
<4> [139.943589] intel_atomic_commit+0xda/0x390 [i915]
<4> [139.943589] drm_atomic_helper_page_flip+0x9c/0xd0
<4> [139.943589] ? drm_event_reserve_init+0x46/0x60
<4> [139.943589] drm_mode_page_flip_ioctl+0x587/0x5d0
This completes the symmetry lost in commit 8b1c78e06e61 ("drm/i915: Avoid
calling i915_gem_object_unbind holding object lock").
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1743
Fixes: 8b1c78e06e61 ("drm/i915: Avoid calling i915_gem_object_unbind holding object lock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200420125356.26614-1-chris@chris-wilson.co.uk
(cherry picked from commit a95f3ac21d64d62c746f836598d1467d5837fa28)
(cherry picked from commit 2208b85fa1766ee4821a9435d548578b67090531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we find ourselves waiting on a MI_SEMAPHORE_WAIT, either within the
user batch or in our own preamble, the engine raises a
GT_WAIT_ON_SEMAPHORE interrupt. We can unmask that interrupt and so
respond to a semaphore wait by yielding the timeslice, if we have
another context to yield to!
The only real complication is that the interrupt is only generated for
the start of the semaphore wait, and is asynchronous to our
process_csb() -- that is, we may not have registered the timeslice before
we see the interrupt. To ensure we don't miss a potential semaphore
blocking forward progress (e.g. selftests/live_timeslice_preempt) we mark
the interrupt and apply it to the next timeslice regardless of whether it
was active at the time.
v2: We use semaphores in preempt-to-busy, within the timeslicing
implementation itself! Ergo, when we do insert a preemption due to an
expired timeslice, the new context may start with the missed semaphore
flagged by the retired context and be yielded, ad infinitum. To avoid
this, read the context id at the time of the semaphore interrupt and
only yield if that context is still active.
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407130811.17321-1-chris@chris-wilson.co.uk
(cherry picked from commit c4e8ba7390346a77ffe33ec3f210bc62e0b6c8c6)
(cherry picked from commit cd60e4ac4738a6921592c4f7baf87f9a3499f0e2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Do an early rejection of a i915_vma_unbind() attempt if the i915_vma is
currently pinned, without waiting to see if the inflight operations may
unpin it. We see this problem with the shrinker trying to unbind the
active vma from inside its bind worker:
<6> [472.618968] Workqueue: events_unbound fence_work [i915]
<4> [472.618970] Call Trace:
<4> [472.618974] ? __schedule+0x2e5/0x810
<4> [472.618978] schedule+0x37/0xe0
<4> [472.618982] schedule_preempt_disabled+0xf/0x20
<4> [472.618984] __mutex_lock+0x281/0x9c0
<4> [472.618987] ? mark_held_locks+0x49/0x70
<4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60
<4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619122] i915_vma_unbind+0xae/0x110 [i915]
<4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915]
<4> [472.619208] i915_gem_shrink+0x328/0x660 [i915]
<4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915]
<4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915]
<4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80
<4> [472.619363] ? __alloc_pd+0xb/0x30 [i915]
<4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30
<4> [472.619368] ? __module_address+0x23/0xe0
<4> [472.619371] ? is_module_address+0x26/0x40
<4> [472.619374] ? static_obj+0x34/0x50
<4> [472.619376] ? lockdep_init_map+0x4d/0x1e0
<4> [472.619407] setup_page_dma+0xd/0x90 [i915]
<4> [472.619437] alloc_pd+0x29/0x50 [i915]
<4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915]
<4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915]
<4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915]
<4> [472.619577] __vma_bind+0x26/0x40 [i915]
<4> [472.619611] fence_work+0x1c/0x90 [i915]
<4> [472.619617] process_one_work+0x26a/0x620
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403120150.17091-1-chris@chris-wilson.co.uk
(cherry picked from commit 614654abe847a42fc75d7eb5096e46f796a438b6)
(cherry picked from commit dd086cf516d9bea3878abb267f62ccc53acd764b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It looks like the sja1105 external timestamping input is not as generic
as we thought. When fed a signal with 50% duty cycle, it will timestamp
both the rising and the falling edge. When fed a short pulse signal,
only the timestamp of the falling edge will be seen in the PTPSYNCTS
register, because that of the rising edge had been overwritten. So the
moral is: don't feed it short pulse inputs.
Luckily this is not a complete deal breaker, as we can still work with
1 Hz square waves. But the problem is that the extts polling period was
not dimensioned enough for this input signal. If we leave the period at
half a second, we risk losing timestamps due to jitter in the measuring
process. So we need to increase it to 4 times per second.
Also, the very least we can do to inform the user is to deny any other
flags combination than with PTP_RISING_EDGE and PTP_FALLING_EDGE both
set.
Fixes: 747e5eb31d59 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev_update_features() must be called with the rtnl lock taken. Not
doing so triggers a warning, as ASSERT_RTNL() is used in
__netdev_update_features(), the first function called by
netdev_update_features(). Fix this.
Fixes: c850240b6c41 ("net: macsec: report real_dev features when HW offloading is enabled")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "info->fs.location" is a u32 that comes from the user via the
ethtool_set_rxnfc() function. We need to check for invalid values to
prevent a buffer overflow.
I copy and pasted this check from the mvpp2_ethtool_cls_rule_ins()
function.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "rss_context" variable comes from the user via ethtool_get_rxfh().
It can be any u32 value except zero. Eventually it gets passed to
mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it
results in an array overflow.
Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.7-rc5
Here's a fix adding a missing input sanity check and a new modem device
id.
Both have been in linux-next with no reported issues.
* tag 'usb-serial-5.7-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: Add DW5816e support
USB: serial: garmin_gps: add sanity checking for data length
|
|
Fix the following coccicheck warning:
drivers/regulator/db8500-prcmu.c:184:1-17: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200506061726.19289-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Unmask/enable AUX interrupts on all ports on TGL+. So far the interrupts
worked only on port A, which meant each transaction on other ports took
10ms.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504075828.20348-1-imre.deak@intel.com
(cherry picked from commit 054318c7e35f1d7d06b216143fff5f32405047ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Avoid loading asus-nb-wmi module on selected laptop models
- Fix S0ix debug support for Jasper Lake PMC
- Few fixes which have been reported by Hulk bot and others
* tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: thinkpad_acpi: Remove always false 'value < 0' statement
platform/x86: intel_pmc_core: avoid unused-function warnings
platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
platform/x86: intel_pmc_core: Change Jasper Lake S0ix debug reg map back to ICL
platform/x86/intel-uncore-freq: make uncore_root_kobj static
platform/x86: wmi: Make two functions static
platform/x86: surface3_power: Fix a NULL vs IS_ERR() check in probe
|
|
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Wait counter is not being reset for each pipe.
[How]
Move counter reset into pipe loop scope.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
There is a problem in hscale_pixel_rate, the bug
causes DCN to be more optimistic (more likely to underflow)
in upscale cases during prefetch.
This commit ports the fix from DV code to address these issues.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The IM-PD1 still need to pass the clock output names.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20200416081348.326833-1-linus.walleij@linaro.org
Fixes: 84655b762a27 ("clk: versatile: Add device tree probing for IM-PD1 clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
On failing to prepare or enable a clock, remove the core structure
from the list it has been inserted as it is about to be freed.
This otherwise leads to random crashes when subsequent clocks get
registered, during which parsing of the clock tree becomes adventurous.
Observed with QEMU's RPi-3 emulation.
Fixes: 12ead77432f2 ("clk: Don't try to enable critical clocks if prepare failed")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit d7a5502b0bb8b ("net: broadcom: convert to
devm_platform_ioremap_resource_byname()") will broke this driver.
idm_base and nicpm_base were optional, after this change, they are
mandatory. it will probe fails with -22 when the dtb doesn't have them
defined. so revert part of this commit and make idm_base and nicpm_base
as optional.
Fixes: d7a5502b0bb8bde ("net: broadcom: convert to devm_platform_ioremap_resource_byname()")
Reported-by: Jonathan Richardson <jonathan.richardson@broadcom.com>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Ray Jui <ray.jui@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SRM cleanup in 79643fddd6eb2 ("drm/hdcp: optimizing the srm
handling") inadvertently altered the behavior of HDCP auth when
the SRM firmware is missing. Before that patch, missing SRM was
interpreted as the device having no revoked keys. With that patch,
if the SRM fw file is missing we reject _all_ keys.
This patch fixes that regression by returning success if the file
cannot be found. It also checks the return value from request_srm such
that we won't end up trying to parse the ksv list if there is an error
fetching it.
Fixes: 79643fddd6eb ("drm/hdcp: optimizing the srm handling")
Cc: stable@vger.kernel.org
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414190258.38873-1-sean@poorly.run
Changes in v2:
-Noticed a couple other things to clean up
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
|
|
When multiple instances of the same MHI product are present in a system,
we can see a splat from mhi_create_devices() - "sysfs: cannot create
duplicate filename".
This is because the device names assigned to the MHI channel devices are
non-unique. They consist of the channel's name, and the channel's pipe
id. For identical products, each instance is going to have the same
set of channel (both in name and pipe id).
To fix this, we prepend the device name of the parent device that the
MHI channels belong to. Since different instances of the same product
should have unique device names, this makes the MHI channel devices for
each product also unique.
Additionally, remove the pipe id from the MHI channel device name. This
is an internal detail to the MHI product that provides little value, and
imposes too much device specific internal details to userspace. It is
expected that channel with a specific name (ie "SAHARA") has a specific
client, and it does not matter what pipe id that channel is enumerated on.
The pipe id is an internal detail between the MHI bus, and the hardware.
The client is not expected to make decisions based on the pipe id, and to
do so would require the client to have intimate knowledge of the hardware,
which is inappropiate as it may violate the layering provided by the MHI
bus. The limitation of doing this is that each product may only have one
instance of a channel by a unique name. This limitation is appropriate
given the usecases of MHI channels.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When reading or writing MHI registers, the core assumes that the physical
link is a memory mapped PCI link. This assumption may not hold for all
MHI devices. The controller knows what is the physical link (ie PCI, I2C,
SPI, etc), and therefore knows the proper methods to access that link.
The controller can also handle link specific error scenarios, such as
reading -1 when the PCI link went down.
Therefore, it is appropriate that the MHI core requests the controller to
make register accesses on behalf of the core, which abstracts the core
from link specifics, and end up removing an unnecessary assumption.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the MHI core detects invalid data due to a PCI read, it calls into
the controller via link_status() to double check that the link is infact
down. All in all, this is pretty pointless, and racy. There are no good
reasons for this, and only drawbacks.
Its pointless because chances are, the controller is going to do the same
thing to determine if the link is down - attempt a PCI access and compare
the result. This does not make the link status decision any smarter.
Its racy because its possible that the link was down at the time of the
MHI core access, but then recovered before the controller access. In this
case, the controller will indicate the link is not down, and the MHI core
will precede to use a bad value as the MHI core does not attempt to retry
the access.
Retrying the access in the MHI core is a bad idea because again, it is
racy - what if the link is down again? Furthermore, there may be some
higher level state associated with the link status, that is now invalid
because the link went down.
The only reason why the MHI core could see "invalid" data when doing a PCI
access, that is actually valid, is if the register actually contained the
PCI spec defined sentinel for an invalid access. In this case, it is
arguable that the MHI implementation broken, and should be fixed, not
worked around.
Therefore, remove the link_status() callback before anyone attempts to
implement it.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Powerdown is necessary if mhi_sync_power_up fails due to a timeout, to
clean up the resources. Otherwise a BUG could be triggered when
attempting to clean up MSIs because the IRQ is still active from a
request_irq().
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200430190555.32741-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Disable the MEI driver on LBG SPS (server) platforms, some corner
flows such as recovery mode does not work, and the driver
doesn't have working use cases.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200428211200.12200-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The flush of the Device Table Entries for the domain has already
happened in increase_address_space(), if necessary. Do no flush them
again in iommu_map_page().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-6-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The Device Table needs to be updated before the new page-table root
can be published in domain->pt_root. Otherwise a concurrent call to
fetch_pte might fetch a PTE which is not reachable through the Device
Table Entry.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-5-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The update_domain() function is expected to also inform the hardware
about domain changes. This needs a COMPLETION_WAIT command to be sent
to all IOMMUs which use the domain.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-4-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When increase_address_space() fails to allocate memory, alloc_pte()
will call it again until it succeeds. Do not loop forever while trying
to increase the address space and just return an error instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The 'pt_root' and 'mode' struct members of 'struct protection_domain'
need to be get/set atomically, otherwise the page-table of the domain
can get corrupted.
Merge the fields into one atomic64_t struct member which can be
get/set atomically.
Fixes: 92d420ec028d ("iommu/amd: Relax locking in dma_ops path")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200504125413.16798-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since 'value' is declared as unsigned long, the following statement is
always false.
value < 0
So let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:
drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~
Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.
The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.
Fixes: aae43c2bcdc1 ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as
Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake
generation. It doesn't use Tiger Lake LPM debug registers. Change the
Jasper Lake S0ix debug interface to use the ICL reg map.
Fixes: 16292bed9c56 ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support")
Signed-off-by: Archana Patni <archana.patni@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, when a device is transitioning to DP Alternate Mode state, if the
HPD_STATE (bit 7) field in the status update command VDO is set to
HPD_HIGH, the HPD_HIGH field in the Alternate Mode request “mode_data”
field (bit 14) should also be set. Ensure the bit is correctly handled
while issuing the Alternate Mode request.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200429054432.134178-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some architectures (e.g. arm64) requests for
IO coherent memory may use non-cachable attributes if
the relevant device isn't cache coherent. If these
pages are then remapped into userspace as cacheable,
they may not be coherent with the non-cacheable mappings.
In particular this happens with libusb, when it attempts
to create zero-copy buffers for use by rtl-sdr
(https://github.com/osmocom/rtl-sdr/). On low end arm
devices with non-coherent USB ports, the application will
be unexpectedly killed, while continuing to work fine on
arm machines with coherent USB controllers.
This bug has been discovered/reported a few times over
the last few years. In the case of rtl-sdr a compile time
option to enable/disable zero copy was implemented to
work around it.
Rather than relaying on application specific workarounds,
dma_mmap_coherent() can be used instead of remap_pfn_range().
The page cache/etc attributes will then be correctly set in
userspace to match the kernel mapping.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device property names for the port index number are
"usb2-port-number" and "usb3-port-number", not "usb2-port"
and "usb3-port".
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200430135657.45169-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the return value of gasket_get_bar_index function as it can return
a negative one (-EINVAL). If this happens, a negative index is used in
the "gasket_dev->bar_data" array.
Addresses-Coverity-ID: 1438542 ("Negative array index read")
Fixes: 9a69f5087ccc2 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Richard Yeh <rcy@google.com>
Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I lost interest in this driver years ago because I could't keep up with
testing the incoming janitorial patches. So, drop me from CC.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Link: https://lore.kernel.org/r/20200502112648.6942-1-wsa@the-dreams.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Wacom driver functional and regression fixes from Jason Gerecke
- race condition fix in usbhid, found by syzbot and fixed by Alan Stern
- a few device-specific quirks and ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock
HID: mcp2221: add gpiolib dependency
HID: i2c-hid: reset Synaptics SYNA2393 on resume
HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT
HID: usbhid: Fix race between usbhid_close() and usbhid_stop()
Revert "HID: wacom: generic: read the number of expected touches on a per collection basis"
HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead
HID: alps: Add AUI1657 device ID
HID: logitech: Add support for Logitech G11 extra keys
HID: multitouch: add eGalaxTouch P80H84 support
HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devices
|
|
In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open.
But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released,
which can lead to a memory leak bug. Fix this issue by adding
nfp_nsp_close(nsp) in the error path.
Fixes: f6e71efdf9fb1 ("nfp: abm: look up MAC addresses via management FW")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The multiplication of cfg->ctr[1] by 1000000000 is performed using a
32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead
to a potential overflow. Fix this by making the constant a ULL to
ensure a 64 bit multiply occurs.
Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gcc-10 warns about functions that return a pointer to a stack
variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually
happen, but it's too hard to see for the compiler:
drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop':
drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr]
760 | return pos;
| ^~~
drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here
712 | u8 buf[48] = {0};
| ^~~
Split the middle part of the function out into a helper to make
it easier to understand by both humans and compilers, which avoids
the warning.
Fixes: 5a4b9fe7fece ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the introduction of TX coalescing, .ndo_start_xmit now potentially
starts the TX completion timer. So only kill the timer _after_ TX has
been disabled.
Fixes: ee1e52d1e4bb ("s390/qeth: add TX IRQ coalescing support for IQD devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull virtio fixes from Michael Tsirkin:
"A couple of bug fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: vsock: kick send_pkt worker once device is started
virtio-blk: handle block_device_operations callbacks after hot unplug
|
|
This was sort of annoying me:
random:~$ dmesg | tail -1
[523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
random:~$ dmesg | grep -c "Reducing the compressed"
47
This patch makes it DRM_INFO_ONCE() just like the similar message
farther down in that function is pr_info_once().
Cc: stable@vger.kernel.org
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745
Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com
[vsyrjala: Rebase due to per-device logging]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 6b7fc6a3e6af4ff5773949d0fed70d8e7f68d5ce)
[Rodrigo: port back to DRM_INFO_ONCE]
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
the related system resources were not released when enetc_hw_alloc()
return error in the enetc_pci_mdio_probe(), add iounmap() for error
handling label "err_hw_alloc" to fix it.
Fixes: 6517798dd3432a ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When ENOSPC is set the idx is still valid and gets set to the global
MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that
ENOSPC is impossible from mlx4_cmd_imm() and gives this warning:
drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be
used uninitialized in this function [-Wmaybe-uninitialized]
2552 | priv->def_counter[port] = idx;
Also, when ENOSPC is returned mlx4_allocate_default_counters should not
fail.
Fixes: 6de5f7f6a1fa ("net/mlx4_core: Allocate default counter per port")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 5a7d202b1574, a logical AND was erroneously changed to an OR,
causing WaIncreaseLatencyIPCEnabled to be enabled unconditionally for
kabylake and coffeelake, even when IPC is disabled. Fix the logic so
that WaIncreaseLatencyIPCEnabled is only used when IPC is enabled.
Fixes: 5a7d202b1574 ("drm/i915: Drop WaIncreaseLatencyIPCEnabled/1140 for cnl")
Cc: stable@vger.kernel.org # 5.3.x+
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430214654.51314-1-sultan@kerneltoast.com
(cherry picked from commit 690d22dafa88b82453516387b475664047a6bd14)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In order to allow userspace to rely on timeslicing to reorder their
batches, we must support preemption of those user batches. Declare
timeslicing as an explicit property that is a combination of having the
kernel support and HW support.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200501122249.12417-1-chris@chris-wilson.co.uk
(cherry picked from commit a211da9c771bf97395a3ced83a3aa383372b13a7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
