| Age | Commit message (Collapse) | Author |
|---|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With commit b984d7b56dfc ("MIPS: sibyte: Remove unused config option
SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
driver can be simplified.
Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* fixes for bind and probing error handling for meson, lt8912b bridge
* panel-orientation fixes for Lenovo Book X90F
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g
|
|
The load_cpu_fw function has no error return code
and always returns zero. Checking the value returned by
this function does not make sense.
Now checking the value of the return value is misleading when reading
the code. Path with error handling was deleted in 57579f7629a3
("bnx2: Use request_firmware()").
As a result, bnx2_init_cpus() will also return only zero
Therefore, it will be safe to change the type of functions
to void and remove checking to improving readability.
Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Link: https://lore.kernel.org/r/20230322162843.3452-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the IPA device sysfs directory, the "version" file can be read to
find out what IPA version is implemented. The content of this file
is supplied by ipa_version_string(), which needs to be updated to
properly handle IPA v5.0.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230322144742.2203947-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.
Fix it by using zeroed memory.
[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74
Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org
|
|
A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
boot and sometimes also after resume. However both are required for the
keyboard to not fail completely sometimes after boot or resume.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix MGMT add advmon with RSSI command
- L2CAP: Fix responding with wrong PDU type
- Fix race condition in hci_cmd_sync_clear
- ISO: Fix timestamped HCI ISO data packet parsing
- HCI: Fix global-out-of-bounds
- hci_sync: Resume adv with no RPA when active scan
* tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
Bluetooth: hci_sync: Resume adv with no RPA when active scan
====================
Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
Third set of fixes for v6.3. mt76 has two kernel crash fixes and
adding back 160 MHz channel support for mt7915. mac80211 has fixes for
a race in transmit path and two mesh related fixes. iwlwifi also has
fixes for races.
* tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix mesh path discovery based on unicast packets
wifi: mac80211: fix qos on mesh interfaces
wifi: iwlwifi: mvm: protect TXQ list manipulation
wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue()
wifi: mwifiex: mark OF related data as maybe unused
wifi: mt76: connac: do not check WED status for non-mmio devices
wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
wifi: mt76: do not run mt76_unregister_device() on unregistered hw
====================
Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
work
In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.
If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.
Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:
Bluetooth: hci0: Opcode 0x c03 failed: -110
Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.
Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.
Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Older platforms and Virtual platforms which doesn't have support for
bluetooth device in ACPI firmware will not have valid ACPI handle.
Check for validity of handle before accessing.
dmesg log from simics environment (virtual platform):
BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
IP: acpi_ns_walk_namespace+0x5c/0x278
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: bnep intel_powerclamp coretemp kvm_intel
kvm irqbypass intel_cstate input_leds joydev serio_raw mac_hid
btusb(OE) btintel(OE) bluetooth(OE) lpc_ich compat(OE) ecdh_generic
i7core_edac i5500_temp shpchp binfmt_misc sch_fq_codel parport_pc ppdev
lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e
psmouse ahci pata_acpi libahci ptp pps_core floppy
CPU: 0 PID: 35 Comm: kworker/u3:0 Tainted: G OE
4.15.0-140-generic #144-Ubuntu
Hardware name: Simics Simics, BIOS Simics 01/01/2011
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:acpi_ns_walk_namespace+0x5c/0x278
RSP: 0000:ffffaa9c0049bba8 EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000001001 RCX: 0000000000000010
RDX: ffffffff92ea7e27 RSI: ffffffff92ea7e10 RDI: 00000000000000c8
RBP: ffffaa9c0049bbf8 R08: 0000000000000000 R09: ffffffffc05b39d0
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: ffffffffc05b39d0 R15: ffffaa9c0049bc70
FS: 0000000000000000(0000) GS:ffff8be73fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000075f0e000 CR4: 00000000000006f0
Fixes: 294d749b5df5 ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe
successively basically calls:
- dwc2_gadget_init()
- dwc2_hcd_init()
- dwc2_lowlevel_hw_disable() since recent change [1]
- usb_add_gadget_udc()
The PHYs (and so the clocks it may provide) shouldn't be disabled for all
SoCs, in OTG mode, as the HCD part has been initialized.
On STM32 this creates some weird race condition upon boot, when:
- initially attached as a device, to a HOST
- and there is a gadget script invoked to setup the device part.
Below issue becomes systematic, as long as the gadget script isn't
started by userland: the hardware PHYs (and so the clocks provided by the
PHYs) remains disabled.
It ends up in having an endless interrupt storm, before the watchdog
resets the platform.
[ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller
[ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2
[ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000
[ 17.032170] hub 2-0:1.0: USB hub found
[ 17.042299] hub 2-0:1.0: 1 port detected
[ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
...
The host part is also not functional, until the gadget part is configured.
The HW may only be disabled for peripheral mode (original init), e.g.
dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes.
But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part
is able to run, while the gadget part isn't necessarily configured.
I don't fully get the of purpose the original change, that claims disabling
the hardware is missing. It creates conditions on SOCs using the PHY
initialization to be completely non working in OTG mode. Original
change [1] should be reworked to be platform specific.
[1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com
Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Each time the platform goes to low power, PM suspend / resume routines
call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset().
This adds a new devres each time.
This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be
called from udc_start().
This can be seen with tracing:
- echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable
- go to low power
- cat /sys/kernel/debug/tracing/trace
A new "ADD" entry is found upon each low power cycle:
... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes)
... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes)
...
A second issue is addressed here:
- regulator_bulk_enable() is called upon each PM cycle (suspend/resume).
- regulator_bulk_disable() never gets called.
So the reference count for these regulators constantly increase, by one
upon each low power cycle, due to missing regulator_bulk_disable() call
in __dwc2_lowlevel_hw_disable().
The original fix that introduced the devm_add_action_or_reset() call,
fixed an issue during probe, that happens due to other errors in
dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without
disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL.
Rather fix the error path: disable all the low level hardware in the
error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode
has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable().
"ll_hw_enabled" should achieve the same (and is used currently in the
remove() routine).
Fixes: 54c196060510 ("usb: dwc2: Always disable regulators on driver teardown")
Fixes: 33a06f1300a7 ("usb: dwc2: Fix error path in gadget registration")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230316084127.126084-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.
Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
current role
It should not return -EINVAL if the request role is the same with current
role, return non-error and without do anything instead.
Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The logic in efi_random_alloc() will iterate over the memory map twice,
once to count the number of candidate slots, and another time to locate
the chosen slot after randomization.
If there is insufficient memory to do the allocation, the second loop
will run to completion without actually having located a slot, but we
currently return EFI_SUCCESS in this case, as we fail to initialize
status to the appropriate error value of EFI_OUT_OF_RESOURCES.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This is just to ensure that .usage_power is properly initialized and
doesn't contain random stack data. The other members of struct pwm_state
should get a value assigned in a successful call to .get_state(). So in
the absence of bugs in driver implementations, this is only a safe-guard
and no fix.
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Link: https://lore.kernel.org/r/20230310214004.2619480-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
This fixes a regression that was possible since commit c73a3107624d
("pwm: Handle .get_state() failures") which stopped to zero-initialize
the state passed to the .get_state() callback. This was reported at
https://forum.odroid.com/viewtopic.php?f=177&t=46360 . While this was an
unintended side effect, the real issue is the driver's callback not
setting the polarity.
There is a complicating fact, that the .apply() callback fakes support
for inversed polarity. This is not (and cannot) be matched by
.get_state(). As fixing this isn't easy, only point it out in a comment
to prevent authors of other drivers from copying that approach.
Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()")
Reported-by: Munehisa Kamata <kamatam@amazon.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230310191405.2606296-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support")
Link: https://lore.kernel.org/r/20230228135508.1798428-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator")
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20230228135508.1798428-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver only supports normal polarity. Complete the implementation of
.get_state() by setting .polarity accordingly.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Fixes: 1f0d3bb02785 ("pwm: Add ChromeOS EC PWM driver")
Link: https://lore.kernel.org/r/20230228135508.1798428-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver only both polarities. Complete the implementation of
.get_state() by setting .polarity according to the configured hardware
state.
Fixes: d09f00810850 ("pwm: Add PWM driver for HiSilicon BVT SOCs")
Link: https://lore.kernel.org/r/20230228135508.1798428-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")
Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sriov needs to enter/exit safe mode in update umd p state
add the cg flag to let it enter or exit while needed
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.
[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
[ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62
We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
In some cases, we expose the kernel's struct screen_info to the EFI stub
directly, so it gets populated before even entering the kernel. This
means the early console is available as soon as the early param parsing
happens, which is nice. It also means we need two different ways to pass
this information, as this trick only works if the EFI stub is baked into
the core kernel image, which is not always the case.
Huacai reports that the preparatory refactoring that was needed to
implement this alternative method for zboot resulted in a non-functional
efifb earlycon for other cases as well, due to the reordering of the
kernel image relocation with the population of the screen_info struct,
and the latter now takes place after copying the image to its new
location, which means we copy the old, uninitialized state.
So let's ensure that the same-image version of alloc_screen_info()
produces the correct screen_info pointer, by taking the displacement of
the loaded image into account.
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/
Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Timing Information in Datasheet assumes that HIGH_SPEED_ENA=1 should be
set for SDR12 and SDR25 modes. But sdhci_am654 driver clears
HIGH_SPEED_ENA register. Thus, Modify sdhci_am654 to not clear
HIGH_SPEED_ENA (HOST_CONTROL[2]) bit for SDR12 and SDR25 speed modes.
Fixes: e374e87538f4 ("mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230317092711.660897-1-b-kapoor@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Andrii changes igb driver to utilize diff_by_scaled_ppm() implementation
over an open-coded version.
Dawid adds pci_error_handlers for reset_prepare and reset_done for
igbvf.
Sasha removes unnecessary code in igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As for multicast:
- The SIDR is the only mode that makes sense;
- Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is
UD compatible. In this case qkey also needs to be set [1].
This patch allows only UD qp_type to join multicast, and set qkey to
default if it's not set, to fix an uninit-value error: the ib->rec.qkey
field is accessed without being initialized.
=====================================================
BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline]
rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546
ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732
vfs_write+0x8ce/0x2030 fs/read_write.c:588
ksys_write+0x28c/0x520 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
__do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Local variable ib.i created at:
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline]
rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
[1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/
Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Reported-by: syzbot+8fcbb77276d43cc8b693@syzkaller.appspotmail.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/58a4a98323b5e6b1282e83f6b76960d06e43b9fa.1679309909.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-03-21
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: E-Switch, Fix an Oops in error handling code
net/mlx5: Read the TC mapping of all priorities on ETS query
net/mlx5e: Overcome slow response for first macsec ASO WQE
net/mlx5e: Initialize link speed to zero
net/mlx5: Fix steering rules cleanup
net/mlx5e: Block entering switchdev mode with ns inconsistency
net/mlx5e: Set uplink rep as NETNS_LOCAL
====================
Link: https://lore.kernel.org/r/20230321211135.47711-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (ice)
This series contains updates to ice driver only.
Piotr sets first_desc field for proper handling of Flow Director
packets.
Michal moves error checking for VF earlier in function to properly return
error before other checks/reporting; he also corrects VSI filter removal to
be done during VSI removal and not rebuild.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: remove filters only if VSI is deleted
ice: check if VF exists before mode check
ice: fix rx buffers handling for flow director packets
====================
Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the configuration data required for IPA v5.0, which is used in
the SDX65 SoC.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the definitions of GSI register offsets and fields for IPA v5.0.
These are used for the SDX65 SoC. Increase the maximum channel and
event ring counts supported by the driver, so those implemented by
the SDX65 are supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the definitions of IPA register offsets and fields for IPA v5.0.
These are used for the SDX65 SoC.
In the Makefile, split IPA_VERSIONS to use IPA_REG_VERSIONS and
IPA_DATA_VERSIONS instead, to allow IPA register definitions for a
new version to be added separate from the IPA data.
Rename GSI_IPA_VERSIONS to be GSI_REG_VERSIONS for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a quirk for a copper SFP that identifies itself as "OEM"
"SFP-2.5G-T". This module's PHY is inaccessible, and can only run
at 2500base-X with the host without negotiation. Add a quirk to
enable the 2500base-X interface mode with 2500base-T support, and
disable autonegotiation.
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
