| Age | Commit message (Collapse) | Author |
|---|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_simpleondemand.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_performance.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_powersave.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/devfreq/governor_userspace.o
Add all missing invocations of the MODULE_DESCRIPTION() macro.
Link: https://lore.kernel.org/lkml/20240605-md-drivers-devfreq-v1-1-d01ae91b907e@quicinc.com/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In the AM62x, AM62Ax, and AM62Px devices, we already have the revision
info within the k3-socinfo driver. Hence, re-use this information from
there instead of re using the offset for 2 drivers trying to get the
same information ie. revision.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The word 'swtich' is wrong, so fix it.
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Commit b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx
and omap36xx") introduced special handling for OMAP3 class devices
where syscon node may not be present. However, this also creates a bug
where the syscon node is present, however the offset used to read
is beyond the syscon defined range.
Fix this by providing a quirk option that is populated when such
special handling is required. This allows proper failure for all other
platforms when the syscon node and efuse offsets are mismatched.
Fixes: b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use raw_smp_processor_id() instead of plain smp_processor_id() in
do_service_request(), otherwise we may get some errors with the driver
enabled:
BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208
caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq]
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return in case of error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The Qualcomm SM7325 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
!CONFIG_OF builds cause warnings on unused of_device_id tables. This is
due to of_match_node() being a macro rather than static inline function.
Add a __maybe_unused annotation to the of_device_id tables.
Fixes: c7582ec85342 ("cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm drivers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408090714.wcrqU6Pk-lkp@intel.com/
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix the reference counting of cpufreq_policy object in amd_pstate_update()
function by adding the missing cpufreq_cpu_put().
Fixes: e8f555daacd3 ("cpufreq/amd-pstate: fix setting policy current frequency value")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The CONFIG_ARM and CONFIG_ARM64 dependency is redundant as all the
drivers have necessary sub-arch dependency and don't depend on the
architecture support.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
COMPILE_TEST is useful for build testing without requiring a specific
architecture's compiler. Enable it for most of the Arm CPUFreq drivers.
As Kconfig.arm is only included on ARM and ARM64, COMPILE_TEST is only
enabled for those architectures until that is dropped.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
of_match_ptr() is not necessary as the driver is always enabled for DT.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
CMN S3 is the latest and greatest evolution for 2024, although most of
the new features don't impact the PMU, so from our point of view it ends
up looking a lot like CMN-700 r3 still. We have some new device types to
ignore, a mildly irritating rearrangement of the register layouts, and a
scary new configuration option that makes it potentially unsafe to even
walk the full discovery tree, let alone attempt to use the PMU.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/2ec9eec5b6bf215a9886f3b69e3b00e4cd85095c.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Annoyingly, we're soon going to have to cope with PMU registers moving
about. This will mostly be straightforward, except for the hard-coding
of CMN_PMU_OFFSET for the DTC PMU registers. As a first step, refactor
those accessors to allow for encapsulating a variable offset without
making a big mess all over. As a bonus, we can repack the arm_cmn_dtc
structure to accommodate the new pointer without growing any larger,
since irq_friend only encodes a range of +/-3.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/fc677576fae7b5b55780e5b245a4ef6ea1b30daf.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
By default, CMN has automatic clock-gating with the implication that
a DTC's cycle counter may not increment while the DTC is sufficiently
idle. Given that we may have up to 4 DTCs to choose from when scheduling
a cycles event, this may potentially lead to surprising results if
trying to measure metrics based on activity in a different DTC domain
from where cycles end up being counted. Furthermore, since the details
of internal clock gating are not documented, we can't even reason about
what "active" cycles for a DTC actually mean relative to the activity of
other nodes within the same nominal DTC domain.
Make the reasonable assumption that if the user wants to count cycles,
they almost certainly want to count all of the cycles, and disable clock
gating while a DTC's cycle counter is in use.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c47cfdc09e907b1d7753d142a7e659982cceb246.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These days we can use static_assert() in the logical place rather than
jamming a BUILD_BUG_ON() into the nearest function scope.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/224ee8286f299100f1c768edb254edc898539f50.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
While CMN_MAX_DIMENSION was bumped to 12 for CMN-650, that only supports
up to a 10x10 mesh, so bumping dtm_idx to 256 bits at the time worked
out OK in practice. However CMN-700 did finally support up to 144 XPs,
and thus needs a worst-case 288 bits of dtm_idx for an aggregated XP
event on a maxed-out config. Oops.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e771b358526a0d7fc06efee2c3a2fdc0c9f51d44.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Apparently pmu_event_sel is offset by 8 for all CCLA nodes, not just
the CCLA_RNI combination type.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6e7bb06fef6046f83e7647aad0e5be544139763f.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The scope of the "extra device ports" configuration is not made clear by
the CMN documentation - so far we've assumed it applies globally, based
on the sole example which suggests as much. However it transpires that
this is incorrect, and the format does in fact vary based on each
individual XP's port configuration. As a consequence, we're currenly
liable to decode the port/device indices from a node ID incorrectly,
thus program the wrong event source in the DTM leading to bogus event
counts, and also show device topology on the wrong ports in debugfs.
To put this right, rework node IDs yet again to carry around the
additional data necessary to decode them properly per-XP. At this point
the notion of fully decomposing an ID becomes more impractical than it's
worth, so unabstracting the XY mesh coordinates (where 2/3 users were
just debug anyway) ends up leaving things a bit simpler overall.
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5195f990152fc37adba5fbf5929a6b11063d9f09.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add suspend and resume support. Only the Root Complex mode is supported.
During the suspend stage PERST# is asserted, then deasserted during the
resume stage.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-7-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
[kwilczynski: commit log, update references to the PCI SIG specification]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
|
|
Use the T_PERST_CLK_US macro, and the fsleep() function instead of
usleep_range().
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-6-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The "Power Sequencing and Reset Signal Timings" table of the PCI
Express Card Electromechanical Specification, Revision 5.1, Section
2.9.2, indicates PERST# should be deasserted after minimum of 100us
once REFCLK is stable (symbol T_PERST-CLK).
Add a macro so that PCIe controller drivers can use it.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-5-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
[kwilczynski: commit log, update sleep interval macros code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
All users of ARM IOMMU mappings create them for a particular device, so
change the interface to accept the device rather than forcing a vague
indirection through a bus type. This prepares for making a similar
change to iommu_domain_alloc() itself.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the amba_bustype variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add a "has_phy" field indicating that the internal PHY has SW control
that requires configuration. Some previous chips only required the
firing of the "rescal" reset controller.
This change requires us to give the 7216 SoC its own cfg_data structure.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-10-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
|
|
Remove two constants in the driver which are no longer
used: RGR1_SW_INIT_1_INIT_MASK and RGR1_SW_INIT_1_INIT_SHIFT.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-9-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Do preparatory work for the 7712 SoC, which is introduced in a
future commit.
Our HW design has changed two register offsets for the 7712, where
previously it was a common value for all Broadcom SoCs with PCIe
cores.
Specifically, the two offsets are to the registers HARD_DEBUG and
INTR2_CPU_BASE.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-8-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
|
|
The 7712 SoC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-7-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The 7712 SoC has a bridge reset which can be described in the device
tree.
Use it if present. Otherwise, continue to use the legacy method to
reset the bridge.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log, refactored function brcm_pcie_bridge_sw_init_set_generic()]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
|
|
Allow the 'active' attribute to list nbcon consoles.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-15-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
This adds the error code to the error message and also stores that
message in case of probe deferral.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240717085517.3333385-1-alexander.stein@ew.tq-group.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Until this patch was rpmb_dev_register() always freeing rdev in the error
path. However, past device_register() it must not do that since the memory
is now managed by the device even if it failed to register properly. So fix
this by doing a put_device() before returning the error code.
Fixes the smatch warning:
drivers/misc/rpmb-core.c:204 rpmb_dev_register()
warn: freeing device managed memory (leak): 'rdev'
Fixes: 1e9046e3a154 ("rpmb: add Replay Protected Memory Block (RPMB) subsystem")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240902105803.2885544-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use str_high_low() rather than open coding.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use GPIO_LOOKUP() macro which provides a compound literal
and can be used with dynamic data.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
client
In the former commits, the callback of isochronous context runs on work
process, thus no need to use atomic memory allocation.
This commit replaces GFP_ATOMIC with GCP_KERNEL in the callback for user
client.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
tasklet softIRQ
This commit queues work item for IT/IR events at hardIRQ handler to operate
the corresponding isochronous context. The work item is queued to any of
worker-pools.
The callback for either the implementation of unit protocol and user space
clients is executed in sleepable work process context. The change could
results in any errors of concurrent processing as well as sleep at atomic
context. These errors are fixed by the following commits.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
isochronous contexts
In the previous commit, the workqueue is added per the instance of fw_card
structure for isochronous contexts. The workqueue is designed to be used by
the implementation of fw_card_driver structure underlying the fw_card.
This commit adds some local APIs to be used by the implementation.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This commit adds a workqueue dedicated for isochronous context processing.
The workqueue is allocated per instance of fw_card structure to satisfy the
following characteristics descending from 1394 OHCI specification:
In 1394 OHCI specification, memory pages are reserved to each isochronous
context dedicated to DMA transmission. It allows to operate these
per-context pages concurrently. Software can schedule hardware interrupt
for several isochronous context to the same cycle, thus WQ_UNBOUND is
specified. Additionally, it is sleepable to operate the content of pages,
thus WQ_BH is not used.
The isochronous context delivers the packets with time stamp, thus
WQ_HIGHPRI is specified for semi real-time data such as IEC 61883-1/6
protocol implemented by ALSA firewire stack. The isochronous context is not
used by the implementation of SCSI over IEEE1394 protocol (sbp2), thus
WQ_MEM_RECLAIM is not specified.
It is useful for users to adjust cpu affinity of the workqueue depending
on their work loads, thus WQ_SYS is specified to expose the attributes to
user space.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The dell battery patch added dell_send_request_for_tokenid() and
dell_set_std_token_value(), which encapsulates a very common pattern
when SMBIOS queries are addressed to token->location. This calls them
in various places outside of the dell laptop code, allowing us to delete
a bunch of code.
Also some very minor cleanups:
- mark the kbd init functions as __init
- don't read buffer.output unless dell_send_request() was successful.
- actually return errors from micmute_led_set/mute_led_set instead of
always returning 0.
Only minor behavior changes; the delayed read of buffer.output and
actually returning errors for the brightness_set_blocking hooks.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033335.4f68b162@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Dell BIOS allows you to set custom charging modes, which is useful
in particular for extending battery life. This adds support for tweaking
those various settings from Linux via sysfs knobs. One might, for
example, have their laptop plugged into power at their desk the vast
majority of the time and choose fairly aggressive battery-saving
settings (eg, only charging once the battery drops below 50% and only
charging up to 80%). When leaving for a trip, it would be more useful
to instead switch to a standard charging mode (top off at 100%, charge
any time power is available). Rebooting into the BIOS to change the
charging mode settings is a hassle.
For the Custom charging type mode, we reuse the common
charge_control_{start,end}_threshold sysfs power_supply entries. The
BIOS also has a bunch of other charging modes (with varying levels of
usefulness), so this also adds a 'charge_type' sysfs entry that maps the
standard values to Dell-specific ones.
This work is based on a patch by Perry Yuan <perry_yuan@dell.com> and
Limonciello Mario <Mario_Limonciello@Dell.com> submitted back in 2020.
Hans de Goede:
s/charge_type/charge_types/ since charge_types_show() used the new
charge_types power-supply property output format.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033005.09e03af1@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for Bus Error Reporting.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-20-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for loopback mode.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-19-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for hardware based timestamping.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-18-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The previous commit prepared the TX path to make use of the full
TX-FIFO depth as much as possible. Increase the available TX-FIFO
depth to the hardware maximum of 2.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-17-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
So far the TX-FIFO is only used with a depth of 1, although the
hardware offers a depth of 2.
The workaround for the chips that are affected by erratum 6, i.e. EFF
frames may be send as standard frames, is to re-send the EFF frame.
This means the driver cannot queue the next frame for sending, as long
ad the EFF frame has not been successfully send out.
Introduce rkcanfd_get_effective_tx_free() that returns "0" space in
the TX-FIFO if an EFF frame is pending and the actual free space in
the TX-FIFO otherwise. Then replace rkcanfd_get_tx_free() with
rkcanfd_get_effective_tx_free() everywhere.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-16-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver contains workarounds for some of the rk3568v2 errata. Add
ethtool-based statistics ("ethtool -S") to track how often an erratum
workaround was needed.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-15-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
broken {RX,TX}ERRORCNT register
Tests show that sometimes both CAN bus error counters read 0x0, even
if the controller is in warning mode
(RKCANFD_REG_STATE_ERROR_WARNING_STATE in RKCANFD_REG_STATE
set).
To work around this issue, if both error counters read from hardware
are 0x0, use the structure priv->bec, otherwise save the read value in
priv->bec.
In rkcanfd_handle_rx_int_one() decrement the priv->bec.rxerr for
successfully RX'ed CAN frames.
In rkcanfd_handle_tx_done_one() decrement the priv->bec.txerr for
successfully TX'ed CAN frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-14-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| A dominant bit at the third bit of the intermission may cause a
| transmission error.
|
| When sampling the third bit of the intermission as a dominant bit, if
| tx_req is configured to transmit extended frames at this time, the
| extended frame may be sent to the bus in the format of a standard
| frame. The extended frame will be sent as a standard frame and will not
| result in error frames
Turn on "Interframe Spaceing RX Mode" only during TX to work around
erratum 12, according to rock-chip:
| Spaceing RX Mode = 1, the third Bit between frames cannot receive
| and send, and the fourth Bit begins to receive and send.
|
| Spaceing RX Mode = 0, allowing the third Bit between frames to
| receive and send.
Message-ID: <be72939f-0a9e-0608-dfff-7b0096a26eba@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-13-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| The CAN controller's transmission of extended frames may
| intermittently change into standard frames.
|
| When using the CAN controller to send extended frames, if the
| 'tx_req' is configured as 1 and coincides with the internal
| transmission point, the extended frame will be transmitted onto the
| bus in the format of a standard frame.
To work around Erratum 6, the driver is in self-receiving mode (RXSTX)
and all received CAN frames are passed through rkcanfd_rxstx_filter().
Add a check in rkcanfd_rxstx_filter() whether the received frame
corresponds to the current outgoing frame, but the extended CAN ID has
been mangled to a standard ID. In this case re-send the original CAN
frame.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-12-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
