summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-04ice: Separate if conditions for ice_set_features()Tony Nguyen
Set features can have multiple features turned on|off in a single call. Grouping these all in an if/else means after one condition is met, other conditions/features will not be evaluated. Break the if/else statements by feature to ensure all features will be handled properly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Remove __always_unused attributeTony Nguyen
The variable netdev is being used in this function; remove the __always_unused attribute from it. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Suppress false-positive style issues reported by static analyzerBruce Allan
A recent version of cppcheck falsely reports- Variable ip.hdr is assigned a value that is never used. ip is a union so the pointer ip.hdr is actually used when referenced as ip.v4 and ip.v6. Silence these false reports when using cppcheck with the --inline-suppr command-line option. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Refactor getting/setting coalesceBrett Creeley
Currently if the driver has an uneven amount of Rx/Tx queues setting the coalesce settings through ethtool will result in an error. This is happening because in the setting coalesce flow we are reporting an error if either Rx or Tx fails. Also, the flow for setting/getting per_q_coalesce and setting/getting coalesce settings for the entire device is different. Fix these issues by adding one function, ice_set_q_coalesce(), and another, ice_get_q_coalesce(), that both getting/setting per_q and entire device coalesce can use. This makes handling the error cases generic between the two flows and simplifies __ice_set_coalesce() and __ice_get_coalesce(). Also, add a header comment to __ice_set_coalesce(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Always free/allocate q_vectorsBrett Creeley
Currently when probing/removing the driver we allocate/deallocate each vsi->q_vectors array in ice_vsi_alloc_arrays() and ice_vsi_free_arrays() respectively. However, we don't do this during the reset and VSI rebuild flow. This is inconsistent and unnecessary to have a difference between the two flows. This patch makes the change to always allocate/deallocate the vsi->q_vectors array regardless of the driver flow we are in. Also, update the comment for ice_vsi_free_arrays() to be more descriptive. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Do not unnecessarily initialize local variableBruce Allan
The local variable speed does not need to be initialized and can cause some static analysis tools to complain the initial assigned value is never used. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Add more validation in ice_vc_cfg_irq_map_msgMichal Swiatkowski
Add few checks to validate msg from iavf driver. Test if we have got enough q_vectors allocated in VSI connected with VF. Add masks for itr_indx and msix_indx to avoid writing to reserved fieldi of QINT. Clear q_vector->num_ring_rx/tx, without it we can increment this value every time we send irq map msg from VF. So after second call this value will be incorrect. Decrement num_vectors from msg, because last vector in iavf msg is misc vector (we don't set map for it). Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Don't remove VLAN filters that were never programmedAkeem G Abodunrin
In case of non-trusted VFs, it is possible to program VLAN filter far less than what is requested by the VF originally, thereby makes number of VLAN elements being tracked by VF different from actual VLAN tags. This patch makes sure that we are not attempting to remove VLAN filter that does not exist. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Preserve VLAN Rx stripping settingsTony Nguyen
When Tx insertion is set, we are not accounting for the state of Rx stripping. This causes Rx stripping to be enabled any time Tx insertion is changed, even when it's supposed to be disabled. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Fix for allowing too many MDD events on VFMichal Swiatkowski
Disable VF if any malicious device driver (MDD) event is detected by hardware. Track vf->num_mdd_events for information about VF MDD events. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04ice: Use pf instead of vsi-backJesse Brandeburg
Many times in our functions we have a local variable pf, which is equivalent to vsi->back. Just use pf consistently instead of vsi->back where available. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04dmaengine: tegra210-adma: restore channel statusSameer Pujar
Status of ADMA channel registers is not saved and restored during system suspend. During active playback if system enters suspend, this results in wrong state of channel registers during system resume and playback fails to resume properly. Fix this by saving following channel registers in runtime suspend and restore during runtime resume. * ADMA_CH_LOWER_SRC_ADDR * ADMA_CH_LOWER_TRG_ADDR * ADMA_CH_FIFO_CTRL * ADMA_CH_CONFIG * ADMA_CH_CTRL * ADMA_CH_CMD * ADMA_CH_TC Runtime PM calls will be inovked during system resume path if a playback or capture needs to be resumed. Hence above changes work fine for system suspend case. Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: tegra210-dma: free dma controller in remove()Sameer Pujar
Following kernel panic is seen during DMA driver unload->load sequence ========================================================================== Unable to handle kernel paging request at virtual address ffffff8001198880 Internal error: Oops: 86000007 [#1] PREEMPT SMP CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f Hardware name: galen (DT) task: ffffffc3590d1a80 task.stack: ffffffc3d0678000 PC is at 0xffffff8001198880 LR is at of_dma_request_slave_channel+0xd8/0x1f8 pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045 sp : ffffffc3d067b710 x29: ffffffc3d067b710 x28: 000000000000002f x27: ffffff800949e000 x26: ffffff800949e750 x25: ffffff800949e000 x24: ffffffbefe817d84 x23: ffffff8009f77cb0 x22: 0000000000000028 x21: ffffffc3ffda49c8 x20: 0000000000000029 x19: 0000000000000001 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffff80082b66a0 x15: ffffff8009e78250 x14: 000000000000000a x13: 0000000000000038 x12: 0101010101010101 x11: 0000000000000030 x10: 0101010101010101 x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f x7 : 62ff726b6b64622c x6 : 0000000000008064 x5 : 6400000000000000 x4 : ffffffbefe817c44 x3 : ffffffc3ffda3e08 x2 : ffffff8001198880 x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788 Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028) Call trace: [<ffffff8001198880>] 0xffffff8001198880 [<ffffff80087459f8>] dma_request_chan+0x50/0x1f0 [<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40 [<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170 [<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878 [<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170 [<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240 [<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80 [<ffffff8008cfc6d4>] snd_open+0xb4/0x178 [<ffffff8008250628>] chrdev_open+0xb8/0x1d0 [<ffffff8008246fdc>] do_dentry_open+0x214/0x318 [<ffffff80082485d0>] vfs_open+0x58/0x88 [<ffffff800825bce0>] do_last+0x450/0xde0 [<ffffff800825c718>] path_openat+0xa8/0x368 [<ffffff800825dd84>] do_filp_open+0x8c/0x110 [<ffffff8008248a74>] do_sys_open+0x164/0x220 [<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50 [<ffffff8008083040>] el0_svc_naked+0x34/0x38 ---[ end trace 67e6d544e65b5145 ]--- Kernel panic - not syncing: Fatal exception ========================================================================== In device probe(), of_dma_controller_register() registers DMA controller. But when driver is removed, this is not freed. During driver reload this results in data abort and kernel panic. Add of_dma_controller_free() in driver remove path to fix the issue. Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: tegra210-adma: add pause/resume supportSameer Pujar
During an audio playback session it is observed that, audio goes off after few seconds of continuous pause and play. No audio is heard even when the playback is resumed. The reason for above is, currently ADMA driver does not handle DMA_PAUSE/ DMA_RESUME and relevant callbacks for dma_device are not implemented. This patch implements device_pause and device_resume callbacks for the device. During pause TRANSFER_PAUSE bit of dma channel control register is set and the same is cleared during resume. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: tegra210-adma: add support for Tegra186/Tegra194Sameer Pujar
Add Tegra186 specific macro defines and chip_data structure for chip specific information. New compatibility is added to select relevant chip details. There is no major change for Tegra194 and hence it can use the same chip data. The bits in the BURST_SIZE field of the ADMA CH_CONFIG register are encoded differently on Tegra186 and Tegra194 compared with Tegra210. On Tegra210 the bits are encoded as follows ... 1 = WORD_1 2 = WORDS_2 3 = WORDS_4 4 = WORDS_8 5 = WORDS_16 Where as on Tegra186 and Tegra194 the bits are encoded as ... 0 = WORD_1 1 = WORDS_2 2 = WORDS_3 3 = WORDS_4 4 = WORDS_5 ... 15 = WORDS_16 Add helper functions for generating the correct burst size. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: tegra210-adma: prepare for supporting newer Tegra chipsSameer Pujar
This is a preparatory patch to add support for Tegra186 and Tegra194 chips. Following changes are necessary to make driver code generic. * chip_data structure is enhanced to have chip specific details and following are the additions to the structure * Offset addresses for ADMA global and channel registers * Offset values for Tx and Rx channel selection * Maximum supported Tx and Rx channels * Tx and Rx channel request mask * ADMA channel register space size * Make use of above chip_data to generalise the driver code Support for Tegra186 and Tegra194 will be added in subsequent patches of the series. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: at_xdmac: remove a stray bottom half unlockDan Carpenter
We switched this code from spin_lock_bh() to vanilla spin_lock() but there was one stray spin_unlock_bh() that was overlooked. This patch converts it to spin_unlock() as well. Fixes: d8570d018f69 ("dmaengine: at_xdmac: move spin_lock_bh to spin_lock in tasklet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: fsl-edma: Adjust indentationKrzysztof Kozlowski
Fix indentation and remove unneeded space after 'return' keyword. This fixes checkpatch warning: WARNING: Statements should start on a tabstop Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: fsl-edma: Fix typo in Vybrid nameKrzysztof Kozlowski
Fix typo in comment for Vybrid SoC family. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04dmaengine: stm32-dma: fix residue calculation in stm32-dmaArnaud Pouliquen
In double buffer mode, during residue calculation, the DMA can automatically switch to the next transfer. Indeed the CT bit that gives position in the double buffer can has been updated by the hardware, during calculation. In this case the SxNDTR register value can not be trusted. If a transition is detected we consider that the DMA has switched to the beginning of next sg. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-04r8169: remove rtl_write_exgmac_batchHeiner Kallweit
rtl_write_exgmac_batch is used in only one place, so we can remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: spectrum: split base on local_ports_in_{1x, 2x} resourcesShalom Toledo
When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: resources: Add local_ports_in_{1x, 2x}Shalom Toledo
Since the number of local ports in 4x changed between SPC and SPC-2, firmware expose new resources that the driver can query. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: Bump firmware version to 13.2000.1122Ido Schimmel
The new version supports two features that are required by upcoming changes in the driver: * Querying of new resources allowing port split into two ports on Spectrum-2 systems * Querying of number of gearboxes on supported systems such as SN3800 Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve resuming from hibernationHeiner Kallweit
I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge tag 'mlx5-updates-2019-04-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-04-30 mlx5 misc updates: 1) Bodong Wang and Parav Pandit (6): - Remove unused mlx5_query_nic_vport_vlans - vport macros refactoring - Fix vport access in E-Switch - Use atomic rep state to serialize state change 2) Eli Britstein (2): - prio tag mode support, added ACLs and replace TC vlan pop with vlan 0 rewrite when prio tag mode is enabled. 3) Erez Alfasi (2): - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions - mlx5e: ethtool, Add support for EEPROM high pages query 4) Masahiro Yamada (1): - remove meaningless CFLAGS_tracepoint.o 5) Maxim Mikityanskiy (1): - Put the common XDP code into a function 6) Tariq Toukan (2): - Turn on HW tunnel offload in all TIRs 7) Vlad Buslov (1): - Return error when trying to insert existing flower filter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-05-02 This series contains updates to the ice driver only. Anirudh introduces the framework to store queue specific information in the VSI queue contexts. This will allow future changes to update the structure to hold queue specific information. Akeem adds additional check so that if there is no queue to disable when attempting to disable a queue, return a configuration error without acquiring the lock. Fixed an issue with non-trusted VFs being able to add more than the permitted number of VLANs. Bruce removes unreachable code and updated the function to return void since it would never return anything but success. Brett provides most of the changes in the series, starting with reducing the scope of the error variable used and improved the debug message if we fail to configure the receive queue. Updates the driver to use a macro instead of using the same 'for' loop throughout the driver which helps with readability. Fixed an issue where users were led to believe they could set rx-usecs-high value, yet the changes to this value would not stick because it was not yet implemented to allow changes to this value, so implement the missing code to change the value. Found we had unnecessary wait when disabling queues, so remove it. I,proved a wasteful addition operation in our hot path by adding a member to the ice_q_vector structure and the necessary changes to use the member which stores the calculated vector hardware index. Refactored the link event flow to make it cleaner and more clear. Maciej updates the array index when stopping transmit rings, so that process every ring the VSI, not just the rings in a given transmit class. Paul adds support for setting 52 byte RSS hash keys. Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register, since the interrupt handlers will handle resetting the bit, if necessary. Tony adds a missing PHY type, which was causing warning message about an unrecognized PHY. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: gcc 8: fix compilation warningSameeh Jubran
GCC 8 contains a number of new warnings as well as enhancements to existing checkers. The warning - Wstringop-truncation - warns for calls to bounded string manipulation functions such as strncat, strncpy, and stpncpy that may either truncate the copied string or leave the destination unchanged. In our case the destination string length (32 bytes) is much shorter than the source string (64 bytes) which causes this warning to show up. In general the destination has to be at least a byte larger than the length of the source string with strncpy for this warning not to showup. This can be easily fixed by using strlcpy instead which already does the truncation to the string. Documentation for this function can be found here: https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141 Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix ena_com_fill_hash_function() implementationSameeh Jubran
ena_com_fill_hash_function() didn't configure the rss->hash_func. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: improve latency by disabling adaptive interrupt moderation by defaultSameeh Jubran
Adaptive interrupt moderation was erroneously enabled by default in the driver. In case the device supports adaptive interrupt moderation it will be automatically used, which may potentially increase latency. The adaptive moderation can be enabled from ethtool command in case the feature is supported by the device. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Guy Tzalik <gtzalik@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix return value of ena_com_config_llq_info()Sameeh Jubran
ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails. Return the failure code of ena_com_set_llq() in case it fails. fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix incorrect test of supported hash functionSameeh Jubran
ena_com_set_hash_function() tests if a hash function is supported by the device before setting it. The test returns the opposite result than needed. Reverse the condition to return the correct value. Also use the BIT macro instead of inline shift. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: Free napi resources when ena_up() failsSameeh Jubran
ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up(). Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: set freed objects to NULL to avoid failing future allocationsSameeh Jubran
In some cases when a queue related allocation fails, successful past allocations are freed but the pointer that pointed to them is not set to NULL. This is a problem for 2 reasons: 1. This is generally a bad practice since this pointer might be accidentally accessed in the future. 2. Future allocations using the same pointer check if the pointer is NULL and fail if it is not. Fixed this by setting such pointers to NULL in the allocation of queue related objects. Also refactored the code of ena_setup_tx_resources() to goto-style error handling to avoid code duplication of resource freeing. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entrySameeh Jubran
second parameter should be the index of the table rather than the value. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Saeed Bshara <saeedb@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04wimax/i2400m: use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]); with: struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls)); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for FEC encoding controlJian Shen
This patch adds support for FEC encoding control, user can change FEC mode by command ethtool --set-fec, and get FEC mode by command ethtool --show-fec. The fec capability is changed follow the port speed. If autoneg on, the user configure fec mode will be overwritten by autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add autoneg and change speed support for fibre portJian Shen
Previously, our driver only supports phydev to autoneg or change port speed. This patch adds support for fibre port, driver gets media speed capability and autoneg capability from firmware. If the media supports multiple speeds, user can change port speed with command "ethtool -s <devname> speed xxxx autoneg off duplex full". If autoneg on, the user configuration may be overwritten by the autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for multiple media typeJian Shen
Previously, we can only identify copper and fiber type, the supported link modes of port information are always showing SR type. This patch adds support for multiple media types, include SR, LR CR, KR. Driver needs to query the media type from firmware periodicly, and updates the port information. The new port information looks like this: Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 25000baseCR/Full 25000baseSR/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Supported FEC modes: None BaseR Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Current message level: 0x00000036 (54) probe link ifdown ifup Link detected: yes In order to be compatible with old firmware which only support sfp speed, we remained using the same query command, and kept the former logic. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03usbnet: ipheth: Remove unnecessary NULL pointer checkGuenter Roeck
ipheth_carrier_set() is called from two locations. In ipheth_carrier_check_work(), its parameter 'dev' is set with container_of(work, ...) and can not be NULL. In ipheth_open(), dev is extracted from netdev_priv(net) and dereferenced before the call to ipheth_carrier_set(). The NULL pointer check of dev in ipheth_carrier_set() is therefore unnecessary and can be removed. Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Pass interrupt number in platform dataAndrew Lunn
Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa :mv88e6xxx: Disable unused portsAndrew Lunn
If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with all ports enable. Ports which are then actively used are reconfigured as required when the driver starts. However unused ports are left alone. Change this to disable them, and turn off any SERDES interface. This could save some power and so reduce the temperature a bit. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Set STP disable state in port_disableAndrew Lunn
When requested to disable a port, set the port STP state to disabled. This fully disables the port and should save some power. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03hv_netvsc: fix race that may miss tx queue wakeupHaiyang Zhang
When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03parisc: Skip registering LED when running in QEMUHelge Deller
No need to spend CPU cycles when we run on QEMU. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-05-03parisc: Tune LASI LAN for QEMUHelge Deller
Do not loose cycles when we run on QEMU, and fix one trivial typo. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03i40e: Introduce recovery mode supportAlice Michael
This patch introduces "recovery mode" to the i40e driver. It is part of a new Any2Any idea of upgrading the firmware. In this approach, it is required for the driver to have support for "transition firmware", that is used for migrating from structured to flat firmware image. In this new, very basic mode, i40e driver must be able to handle particular IOCTL calls from the NVM Update Tool and run a small set of AQ commands. These additional AQ commands are part of the interface used by the NVMUpdate tool. The NVMUpdate tool contains all of the necessary logic to reference these new AQ commands. The end user experience remains the same, they are using the NVMUpdate tool to update the NVM contents. Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: print PCI vendor and device ID during probeStefan Assmann
Printing each devices PCI vendor and device ID has the advantage of easily revealing what hardware we're dealing with exactly. It's no longer necessary to match the PCI bus information to the lspci output. Helps with bug reports where no lspci output is available. Output before i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 and after i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-21 06:14:10 +0000