summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-05-07Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' ↵Stephen Boyd
and 'clk-qoriq' into clk-next - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
2019-05-07Merge branches 'clk-sa', 'clk-aspeed', 'clk-samsung', 'clk-ingenic' and ↵Stephen Boyd
'clk-zynq' into clk-next - Various static analysis fixes/finds - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented * clk-sa: clk: mvebu: fix spelling mistake "gatable" -> "gateable" clk: ux500: add range to usleep_range clk: tegra: Make tegra_clk_super_mux_ops static clk: davinci: cfgchip: use PTR_ERR_OR_ZERO in da8xx_cfgchip_register_div4p5 * clk-aspeed: clk: Aspeed: Setup video engine clocking * clk-samsung: clk: samsung: exynos5410: Add gate clock for ADC clk: samsung: dt-bindings: Add ADC clock ID to Exynos5410 clk: samsung: dt-bindings: Put CLK_UART3 in order * clk-ingenic: clk: ingenic: jz4725b: Add UDC PHY clock dt-bindings: clock: jz4725b-cgu: Add UDC PHY clock * clk-zynq: clk: zynqmp: use structs for clk query responses clk: zynqmp: fix check for fractional clock clk: zynqmp: do not export zynqmp_clk_register_* functions clk: zynqmp: fix kerneldoc of __zynqmp_clock_get_parents drivers: clk: Update clock driver to handle clock attribute drivers: clk: zynqmp: Allow zero divisor value
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and ↵Stephen Boyd
'clk-basic-be' into clk-next - Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-05-07Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and ↵Stephen Boyd
'clk-imx' into clk-next - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock
2019-05-07drm/amd/powerplay: check for invalid profile_exit settingEvan Quan
profile_exit performance level setting is valid only when current mode is in profile mode. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-07drm/amdgpu: Use FW addr returned by PSP for VF MMTrigger Huang
One Vega10 SR-IOV VF, the FW address returned by PSP should be set into the init table, while not the original BO mc address. otherwise, UVD and VCE IB test will fail under Vega10 SR-IOV reference: commit bfcea5204287 ("drm/amdgpu:change VEGA booting with firmware loaded by PSP") commit aa5873dca463 ("drm/amdgpu: Change VCE booting with firmware loaded by PSP") Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-07rbd: don't assert on writes to snapshotsIlya Dryomov
The check added in commit 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") was lifted in commit a32e236eb93e ("Partially revert "block: fail op_is_write() requests to read-only partitions""). Basic things like user triggered writes and discards are still caught, but internal kernel users can submit anything. In particular, ext4 will attempt to write to the superblock if it detects errors in the filesystem, even if the filesystem is mounted read-only on a read-only partition. The assert is overkill regardless. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07rbd: client_mutex is never nestedIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07net: hns3: use devm_kcalloc when allocating desc_cbYunsheng Lin
This patch uses devm_kcalloc instead of kcalloc when allocating ring->desc_cb, because devm_kcalloc not only ensure to free the memory when the dev is deallocted, but also allocate the memory from it's device memory node. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: some cleanup for struct hns3_enet_ringYunsheng Lin
This patch removes some unused field in struct hns3_enet_ring, use ring->dev for ring_to_dev macro, and use dev consistently in hns3_fill_desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: unify the page reusing for page size 4K and 64KYunsheng Lin
When page size is 64K, RX buffer is currently not reused when the page_offset is moved to last buffer. This patch adds checking to decide whether the buffer page can be reused when last_offset is moved beyond last offset. If the driver is the only user of page when page_offset is moved to beyond last offset, then buffer can be reused and page_offset is set to zero. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: optimize the barrier using when cleaning TX BDYunsheng Lin
Currently, a barrier is used when cleaning each TX BD, which may cause performance degradation. This patch optimizes it to use one barrier when cleaning TX BD each round. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: fix error handling for desc fillingYunsheng Lin
When desc filling fails in hns3_nic_net_xmit, it will call hns3_clear_desc to unmap the dma mapping. But currently the ring->next_to_use points to the desc where the desc filling or dma mapping return error, which means the desc that ring->next_to_use points to has not done the dma mapping, the desc that need unmapping is before the ring->next_to_use. This patch fixes it by calling ring_ptr_move_bw(next_to_use) before doing unmapping operation, and set desc_cb->dma to zero to avoid freeing it again when unloading. Also, when filling skb head or frag fails, both need to unmap all the way back to next_to_use_head, so remove one desc filling error handling. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: combine len and checksum handling for inner and outer header.Yunsheng Lin
When filling len and checksum info to description, there is some similar checking or calculation. So this patch adds hns3_set_l2l3l4 to fill the inner(/normal) header's len and checksum info. If it is a encapsulation skb, it calls hns3_set_outer_l2l3l4 to handle the outer header's len and checksum info, in order to avoid some similar checking or calculation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: refactor BD filling for l2l3l4 infoYunsheng Lin
This patch separates the inner and outer l2l3l4 len handling in hns3_set_l2l3l4_len, this is a preparation to combine the l2l3l4 len and checksum handling for inner and outer header. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: fix for tunnel type handling in hns3_rx_checksumYunsheng Lin
According to hardware user manual, the tunnel packet type is available in the rx.ol_info field of struct hns3_desc. Currently the tunnel packet type is decided by the rx.l234_info, which may cause RX checksum handling error. This patch fixes it by using the correct field in struct hns3_desc to decide the tunnel packet type. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: add linearizing checking for TSO caseYunsheng Lin
HW requires every continuous 8 buffer data to be larger than MSS, we simplify it by ensuring skb_headlen + the first continuous 7 frags to to be larger than GSO header len + mss, and the remaining continuous 7 frags to be larger than MSS except the last 7 frags. This patch adds hns3_skb_need_linearized to handle it for TSO case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: add counter for times RX pages gets allocatedYunsheng Lin
Currently, using "ethtool --statistics" can show how many time RX page have been reused, but there is no counter for RX page not being reused. This patch adds non_reuse_pg counter to better debug the performance issue, because it is hard to determine when the RX page is reused or not if there is no such counter. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: use napi_schedule_irqoff in hard interrupts handlersYunsheng Lin
napi_schedule_irqoff is introduced to be used from hard interrupts handlers or when irqs are already masked, see: https://lists.openwall.net/netdev/2014/10/29/2 So this patch replaces napi_schedule with napi_schedule_irqoff. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: hns3: unify maybe_stop_tx for TSO and non-TSO caseYunsheng Lin
Currently, maybe_stop_tx ops for TSO and non-TSO case share some BD calculation code, so this patch unifies the maybe_stop_tx by removing the maybe_stop_tx ops. skb_is_gso() can be used to differentiate the case between TSO and non-TSO case if there is need to handle special case for TSO case. This patch also add tx_copy field in "ethtool --statistics" to help better debug the performance issue caused by calling skb_copy. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add Forwarding Database accessHauke Mehrtens
This adds functions to add and remove static entries to and from the forwarding database and dump the full forwarding database. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add fast age functionHauke Mehrtens
Fast aging per port is not supported directly by the hardware, it is only possible to configure a global aging time. Do the fast aging by iterating over the MAC forwarding table and remove all dynamic entries for a given port. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add VLAN aware bridge offloadingHauke Mehrtens
The VLAN aware bridge offloading is similar to the VLAN unaware offloading, this makes it possible to offload the VLAN bridge functionalities. The hardware supports up to 64 VLAN bridge entries, we already use one entry for each LAN port to prevent forwarding of packets between the ports when the ports are not in a bridge, so in the end we have 57 possible VLANs. The VLAN filtering is currently only active when the ports are in a bridge, VLAN filtering for ports not in a bridge is not implemented. It is currently not possible to change between VLAN filtering and not filtering while the port is already in a bridge, this would make the driver more complicated. The VLANs are only defined on bridge entries, so we will not add anything into the hardware when the port joins a bridge if it is doing VLAN filtering, but only when an allowed VLAN is added. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Add VLAN unaware bridge offloadingHauke Mehrtens
This allows to offload bridges with DSA to the switch hardware and do the packet forwarding in hardware. This implements generic functions to access the switch hardware tables, which are used to control many features of the switch. This patch activates the MAC learning by removing the MAC address table lock, to prevent uncontrolled forwarding of packets between all the LAN ports, they are added into individual bridge tables entries with individual flow ids and the switch will do the MAC learning for each port separately before they are added to a real bridge. Each bridge consist of an entry in the active VLAN table and the VLAN mapping table, table entries with the same index are matching. In the VLAN unaware mode we configure everything with VLAN ID 0, but we use different flow IDs, the switch should handle all VLANs as normal payload and ignore them. When the hardware looks for the port of the destination MAC address it only takes the entries which have the same flow ID of the ingress packet. The bridges are configured with 64 possible entries with these information: Table Index, 0...63 VLAN ID, 0...4095: VLAN ID 0 is untagged flow ID, 0..63: Same flow IDs share entries in MAC learning table port map, one bit for each port number tagged port map, one bit for each port number Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: lantiq: Allow special tags only on CPU portHauke Mehrtens
Allow the special tag in ingress only on the CPU port and not on all ports. A packet with a special tag could circumvent the hardware forwarding and should only be allowed on the CPU port where Linux controls the port. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200)" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07vfio/mdev: Avoid inline get and put parent helpersParav Pandit
As section 15 of Documentation/process/coding-style.rst clearly describes that compiler will be able to optimize code. Hence drop inline for get and put helpers for parent. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Fix aborting mdev child device removal if one failsParav Pandit
device_for_each_child() stops executing callback function for remaining child devices, if callback hits an error. Each child mdev device is independent of each other. While unregistering parent device, mdev core must remove all child mdev devices. Therefore, mdev_device_remove_cb() always returns success so that device_for_each_child doesn't abort if one child removal hits error. While at it, improve remove and unregister functions for below simplicity. There isn't need to pass forced flag pointer during mdev parent removal which invokes mdev_device_remove(). So simplify the flow. mdev_device_remove() is called from two paths. 1. mdev_unregister_driver() mdev_device_remove_cb() mdev_device_remove() 2. remove_store() mdev_device_remove() Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Follow correct remove sequenceParav Pandit
mdev_remove_sysfs_files() should follow exact mirror sequence of a create, similar to what is followed in error unwinding path of mdev_create_sysfs_files(). Fixes: 6a62c1dfb5c7 ("vfio/mdev: Re-order sysfs attribute creation") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Avoid masking error code to EBUSYParav Pandit
Instead of masking return error to -EBUSY, return actual error returned by the driver. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Removed unused krefParav Pandit
Remove unused kref from the mdev_device structure. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07vfio/mdev: Avoid release parent reference during error pathParav Pandit
During mdev parent registration in mdev_register_device(), if parent device is duplicate, it releases the reference of existing parent device. This is incorrect. Existing parent device should not be touched. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-05-07rbd: convert all rbd_assert(0) to BUG()Arnd Bergmann
rbd_assert(0) has caused different issues depending on the compiler version in the past, so it seems better to avoid it completely. Replace the remaining instances. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07rbd: avoid clang -Wuninitialized warningArnd Bergmann
clang fails to see that rbd_assert(0) ends in an unreachable code path and warns about a subsequent use of an uninitialized variable when CONFIG_PROFILE_ANNOTATED_BRANCHES is set: drivers/block/rbd.c:2402:4: error: variable 'ret' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] rbd_assert(0); ^~~~~~~~~~~~~ drivers/block/rbd.c:563:7: note: expanded from macro 'rbd_assert' if (unlikely(!(expr))) { \ ^~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/block/rbd.c:2410:6: note: uninitialized use occurs here if (ret) { ^~~ drivers/block/rbd.c:2402:4: note: remove the 'if' if its condition is always true rbd_assert(0); ^ drivers/block/rbd.c:563:3: note: expanded from macro 'rbd_assert' if (unlikely(!(expr))) { \ ^ drivers/block/rbd.c:2376:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 1 error generated. This seems to be a bug in clang, but is easy to work around by using an unconditional BUG(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-07RDMA/device: Don't fire uevent before device is fully initializedLeon Romanovsky
When the refcount is 0 the device is invisible to netlink. However in the patch below the refcount = 1 was moved to after the device_add(). This creates a race where userspace can issue a netlink query after the device_add() event and not see the device as visible. Ensure that no uevent is fired before device is fully registered. Fixes: d79af7242bb2 ("RDMA/device: Expose ib_device_try_get(()") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - support for U2F Zero device, from Andrej Shadura - logitech-dj has historically been treating devices behind non-unifying receivers as generic devices, using the HID emulation in the receiver. That had several shortcomings (special keys handling, battery level monitoring, etc). The driver has been reworked to enumarate (and directly communicate with) the devices behind the receiver, to avoid the (too) generic HID implementation in the receiver itself. All the work done by Benjamin Tissoires and Hans de Goede. - restructuring of intel-ish driver in order to allow for multiple clients of the ISH implementation, from Srinivas Pandruvada - several other smaller fixes and assorted device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits) HID: logitech-dj: fix spelling in printk HID: input: fix assignment of .value HID: input: make sure the wheel high resolution multiplier is set HID: logitech-dj: add usbhid dependency in Kconfig HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports HID: logitech-hidpp: add support for HID++ 1.0 wheel reports HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic HID: logitech-hidpp: add input_device ptr to struct hidpp_device HID: logitech-hidpp: do not hardcode very long report length HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers HID: logitech-hidpp: use RAP instead of FAP to get the protocol version HID: logitech-hidpp: remove unused origin_is_hid_core function parameter HID: logitech-hidpp: remove double assignment from __hidpp_send_report HID: logitech-hidpp: do not make failure to get the name fatal HID: logitech-hidpp: ignore very-short or empty names HID: logitech-hidpp: make .probe usbhid capable HID: logitech-hidpp: allow non HID++ devices to be handled by this module HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver HID: logitech-dj: make appending of the HID++ descriptors conditional ...
2019-05-07Merge tag 'i3c/for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c update from Boris Brezillon: - Fix a shift wrap bug in the core - Remove dead code in the DW driver * tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status() i3c: master: dw: remove dead code from dw_i3c_master_*_xfers()
2019-05-07RDMA/efa: Add driver to Kconfig/MakefileGal Pressman
Add EFA Makefile and Kconfig. Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07RDMA/efa: Add the efa moduleGal Pressman
Add the main EFA module file which takes care of device probe/initialization/registration/etc. Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07RDMA/efa: Add EFA verbs implementationGal Pressman
Add a file that implements the EFA verbs. Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-07drm: Fix timestamp docs for variable refresh properties.Mario Kleiner
As discussed with Nicholas and Daniel Vetter (patchwork link to discussion below), the VRR timestamping behaviour produced utterly useless and bogus vblank/pageflip timestamps. We have found a way to fix this and provide sane behaviour. As of Linux 5.2, the amdgpu driver will be able to provide exactly the same vblank / pageflip timestamp semantic in variable refresh rate mode as in standard fixed refresh rate mode. This is achieved by deferring core vblank handling (drm_crtc_handle_vblank()) until the end of front porch, and also defer the sending of pageflip completion events until end of front porch, when we can safely compute correct pageflip/vblank timestamps. The same approach will be possible for other VRR capable kms drivers, so we can actually have sane and useful timestamps in VRR mode. This patch removes the section of the docs that describes the broken timestamp behaviour present in Linux 5.0/5.1. Fixes: ab7a664f7a2d ("drm: Document variable refresh properties") Link: https://patchwork.freedesktop.org/patch/285333/ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418060157.18968-1-mario.kleiner.de@gmail.com Cc: stable@vger.kernel.org
2019-05-07drivers/dax: Allow to include DEV_DAX_PMEM as builtinAneesh Kumar K.V
This move the dependency to DEV_DAX_PMEM_COMPAT such that only if DEV_DAX_PMEM is built as module we can allow the compat support. This allows to test the new code easily in a emulation setup where we often build things without module support. Cc: <stable@vger.kernel.org> Fixes: 730926c3b099 ("device-dax: Add /sys/class/dax backwards compatibility") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-07Merge tag 'spi-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "One small feature was added this release but the bulk of the diffstat and the changelog comes from the fact that several older drivers got some fairly hefty reworks and a couple of new drivers were added: - Support for detailed control of timing around chip selects from Sowjanya Komatineni. - A big set of fixes and imrovements for the Tegra114 driver from Sowjanya Komatineni. - A big simplification of the GPIO driver from Andrey Smirnov. - DMA support and fixes for the Freescale LPSPI driver from Clark Wang. - Fixes and optimizations for the bcm2835aux from Martin Sparl. - New drivers for Mediatek MT7621 (graduated from staging) and Zynq QSPI" [ This is a so-called "evil merge" that additionally removes a warning due to an unused variable 'i' introduced by commit 1dfbf334f123 ("spi: ep93xx: Convert to use CS GPIO descriptors") - Linus ] * tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits) spi: rspi: Fix handling of QSPI code when transmit and receive spi: atmel-quadspi: fix crash while suspending spi: stm32: return the get_irq error spi: tegra114: fix PIO transfer spi: pxa2xx: fix SCR (divisor) calculation spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select spi: ep93xx: Convert to use CS GPIO descriptors spi: AD ASoC: declare missing of table spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl spi: stm32-qspi: manage the get_irq error case spi/spi-bcm2835: Split transfers that exceed DLEN spi: expand mode support dt-bindings: spi: spi-mt65xx: add support for MT8516 spi: pxa2xx: Add support for Intel Comet Lake spi/trace: Cap buffer contents at 64 bytes spi: Release spi_res after finalizing message spi: Remove warning in spi_split_transfers_maxsize() spi: Remove one needless transfer speed fall back case spi: sh-msiof: Document r8a77470 bindings spi: pxa2xx: use a module softdep for dw_dmac ...
2019-05-07Merge tag 'regulator-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "In terms of big picture changes this has been an extremely quiet release however there's a lot of changes and a fairly big diffstat thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks to his work this release removes code overall even though we've added a new (albiet fairly small) driver. Notable things: - A fix for a long standing issue with locking on error interrupts from Steve Twiss. - A new driver for ST Microelectonics STM32 PWR" * tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits) regulator: core: simplify return value on suported_voltage regulator: da9xxx: Switch to SPDX identifier regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc regulator: pv880x0: Switch to SPDX identifier regulator: hi6xxx: Switch to SPDX identifier regulator: vexpress: Switch to SPDX identifier regulator: vexpress: Get rid of struct vexpress_regulator regulator: sky81452: Switch to SPDX identifier regulator: sky81452: Constify sky81452_reg_ops regulator: sy8106a: Get rid of struct sy8106a regulator: core: do not report EPROBE_DEFER as error but as debug regulator: mt63xx: Switch to SPDX identifier regulator: fan53555: Switch to SPDX identifier regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info regulator: ltc3589: Switch to SPDX identifier regulator: ltc3589: Get rid of struct ltc3589_regulator regulator: ltc3589: Convert to use simplified DT parsing ...
2019-05-07Merge tag 'regmap-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "A larger than usual set of changes, though mainly small: - An optimization to the debugfs code to greatly improve performance when dumping extremely sparse register maps from Lucas Tanure. - Stricter enforcement of writability checks from Han Nandor. - A fix for default interrupt mode configuration from Srinivas Kandagatla. - SPDX header conversion from Greg Kroah-Hartman" * tag 'regmap-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: add proper SPDX identifiers on files that did not have them. regmap: verify if register is writeable before writing operations regmap: regmap-irq: fix getting type default values regmap: debugfs: Jump to the next readable register regmap: debugfs: Replace code by already existing function
2019-05-07PCI: imx6: Allow asynchronous probingLucas Stach
Establishing a PCIe link can take a while; allow asynchronous probing so that link establishment can happen in the background while other devices are being probed. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-05-07PCI: dwc: Save root bus for driver remove hooksJisheng Zhang
Currently DWC host does not support the remove callback, but nothing prevents us from supporting it. Save the root bus for clean up work in driver remove code paths to allow DWC host drivers to implement their remove hook as, eg: static int foo_pcie_remove(struct platform_device *pdev) { ... pci_stop_root_bus(pp->root_bus); pci_remove_root_bus(pp->root_bus); dw_pcie_free_msi(pp); ... } Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-05-07PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify codeJisheng Zhang
Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> CC: stable@vger.kernel.org # v4.13+
2019-05-07Merge branches 'thermal-core', 'thermal-built-it' and 'thermal-intel' into nextZhang Rui
generated by cgit (git 2.34.1) at 2025-09-17 13:01:54 +0000