summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-07-22drm/panel: raspberrypi-touchscreen: Prevent double-freeMaxime Ripard
The mipi_dsi_device allocated by mipi_dsi_device_register_full() is already free'd on release. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech
2021-07-22interconnect: Always call pre_aggregate before aggregateMike Tipton
The pre_aggregate callback isn't called in all cases before calling aggregate. Add the missing calls so providers can rely on consistent framework behavior. Fixes: d3703b3e255f ("interconnect: Aggregate before setting initial bandwidth") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22interconnect: Zero initial BW after sync-stateMike Tipton
The initial BW values may be used by providers to enforce floors. Zero these values after sync-state so that providers know when to stop enforcing them. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-22net: sparx5: fix unmet dependencies warningRandy Dunlap
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ravb: Remove extra TABBiju Das
Align the member description comments for struct ravb_desc by removing the extra TAB. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ravb: Fix a typo in commentBiju Das
Fix the typo RX->TX in comment, as the code following the comment process TX and not RX. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21net: dsa: sja1105: make VID 4095 a bridge VLAN tooVladimir Oltean
This simple series of commands: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 fails on sja1105 with the following error: [ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN [ 33.447710] sja1105 spi0.1: Invalid config, cannot upload Warning: sja1105: Failed to change VLAN Ethertype. For context, sja1105 has 3 operating modes: - SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware - SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware - SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the bridge_vlans are committed to hardware Swapping out a VLAN list and another in happens in sja1105_build_vlan_table(), which performs a delta update procedure. That function is called from a few places, notably from sja1105_vlan_filtering() which is called from the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler. The above set of 2 commands fails when run on a kernel pre-commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"). So the priv->vlan_state transition that takes place is between VLAN-unaware and full VLAN filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans are swapped in. So why does it fail? Well, the bridge driver, through nbp_vlan_init(), first sets up the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then proceeds to call nbp_vlan_add for the default_pvid. So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge VLANs (yet). So we have wiped the VLAN table clean, and the low-level static config checker complains of an invalid configuration. We _will_ add the bridge VLANs using the dynamic config interface, albeit later, when nbp_vlan_add() calls us. So it is natural that it fails. So why did it ever work? Surprisingly, it looks like I only tested this configuration with 2 things set up in a particular way: - a network manager that brings all ports up - a kernel with CONFIG_VLAN_8021Q=y It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net device that comes up. DSA treats these VLANs as bridge VLANs, and therefore, in my testing, the list of bridge_vlans was never empty. However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily empty, and the sja1105_static_config_reload() call from sja1105_vlan_filtering() will fail. To fix this, the simplest thing is to keep VID 4095, the one used for CPU-injected control packets since commit ed040abca4c1 ("net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic"), in the list of bridge VLANs too, not just the list of tag_8021q VLANs. This ensures that the list of bridge VLANs will never be empty. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-22Merge tag 'amd-drm-fixes-5.14-2021-07-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-07-21: amdgpu: - Yellow Carp updates - Add some Yellow Carp DIDs - Beige Goby updates - CIK 10bit 4K regression fix - GFX10 golden settings updates - eDP panel regression fix - Misc display fixes - Aldebaran fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210721215800.17590-1-alexander.deucher@amd.com
2021-07-22drm/mediatek: dpi: Fix NULL dereference in mtk_dpi_bridge_atomic_checkFrank Wunderlich
bridge->driver_private is not set (NULL) so use bridge_to_dpi(bridge) like it's done in bridge_atomic_get_output_bus_fmts Fixes: ec8747c52434 ("drm/mediatek: dpi: Add bus format negotiation") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-07-21drm/amdgpu - Corrected the video codecs array name for yellow carpVeerabadhran Gopalakrishnan
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21Merge tag 'spi-fix-v5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of driver specific fixes, there was a bit of a kerfuffle with some last minute review on hte spi-cadence-quadspi division by zero change but otherwise nothing terribly remarkable here - important fixes if you have the hardware but nothing with too wide an impact" * tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-bcm2835: Fix deadlock spi: cadence: Correct initialisation of runtime PM again spi: cadence-quadspi: Disable Auto-HW polling spi: spi-cadence-quadspi: Fix division by zero warning spi: spi-cadence-quadspi: Revert "Fix division by zero warning" spi: spi-cadence-quadspi: Fix division by zero warning spi: mediatek: move devm_spi_register_master position spi: mediatek: fix fifo rx mode spi: atmel: Fix CS and initialization bug spi: stm32: fixes pm_runtime calls in probe/remove spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay spi: stm32h7: fix full duplex irq handler handling
2021-07-21Merge tag 'regulator-fix-v5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes that came in since the merge window, plus a change to mark the regulator-fixed-domain DT binding as deprecated in order to try to to discourage any new users while a better solution is put in place" * tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: hi6421: Fix getting wrong drvdata regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register regulator: fixed: Mark regulator-fixed-domain as deprecated regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure regulator: rt5033: Fix n_voltages settings for BUCK and LDO regulator: rtmv20: Fix wrong mask for strobe-polarity-high
2021-07-21drm/amd/display: Fix ASSR regression on embedded panelsStylon Wang
[Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-21drm/amdgpu: add yellow carp pci id (v2)Aaron Liu
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amdgpu: update yellow carp external rev_id handlingAaron Liu
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/pm: Support board calibration on aldebaranLijo Lazar
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: change zstate allow msg conditionEric Yang
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Line Buffer changesNevenko Stupar
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Only set default brightness for OLEDCamille Cho
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stickJohn Keeping
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by: John Keeping <john@metanate.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-07-21xen/events: remove redundant initialization of variable irqColin Ian King
The variable irq is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210721114010.108648-1-colin.king@canonical.com Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-07-21net: ixp46x: fix ptp build failureArnd Bergmann
The rework of the ixp46x cpu detection left the network driver in a half broken state: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) 290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level: drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror] 323 | module_init(ptp_ixp_init); I have patches to complete the transition for a future release, but for the moment, add the missing include statements to get it to build again. Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ibmvnic: Remove the proper scrq flushSukadev Bhattiprolu
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") intended to remove the call to ibmvnic_tx_scrq_flush() when the ->resetting flag is true and was tested that way. But during the final rebase to net-next, the hunk got applied to a block few lines below (which happened to have the same diff context) and the wrong call to ibmvnic_tx_scrq_flush() got removed. Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring the one that was incorrectly removed. Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21drm/i915: Correct the docs for intel_engine_cmd_parserJason Ekstrand
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser""), the parameters to intel_engine_cmd_parser() were altered without updating the docs, causing Fi.CI.DOCS to start failing. Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"") Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Added 'Fixes:' tag and corrected the hash for the ancestor] (cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Updated Fixes tag to match fixes branch]
2021-07-21staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4Arnd Bergmann
The other rtlwifi drivers already have this, but r8723bs was converted to the generic implementation without adding the select: ERROR: modpost: "arc4_crypt" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: modpost: "arc4_setkey" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! Fixes: 1b11e893eda0 ("staging: rtl8723bs: replace private arc4 encryption with in-kernel one") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210721153550.3624490-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21driver core: Prevent warning when removing a device link from unregistered ↵Adrian Hunter
consumer sysfs_remove_link() causes a warning if the parent directory does not exist. That can happen if the device link consumer has not been registered. So do not attempt sysfs_remove_link() in that case. Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # 5.9+ Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21nvme: set the PRACT bit when using Write Zeroes with T10 PIChristoph Hellwig
When using Write Zeroes on a namespace that has protection information enabled they behavior without the PRACT bit counter-intuitive and will generally lead to validation failures when reading the written blocks. Fix this by always setting the PRACT bit that generates matching PI data on the fly. Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-21rbd: resurrect setting of disk->private_data in rbd_init_disk()Ilya Dryomov
rbd_open() and rbd_release() expect that disk->private_data is set to rbd_dev. Otherwise we hit a NULL pointer dereference when mapping the image. URL: https://tracker.ceph.com/issues/51759 Fixes: 195b1956b85b ("rbd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-07-21r8169: Avoid duplicate sysfs entry creation errorSayanta Pattanayak
When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21driver core: auxiliary bus: Fix memory leak when driver_register() failPeter Ujfalusi
If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register() Fixes: 7de3697e9cbd4 ("Add auxiliary bus support") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: pci_generic: Fix inbound IPCR channelLoic Poulain
The qrtr-mhi client driver assumes that inbound buffers are automatically allocated and queued by the MHI core, but this doesn't happen for mhi pci devices since IPCR inbound channel is not flagged with auto_queue, causing unusable IPCR (qrtr) feature. Fix that. Link: https://lore.kernel.org/r/1625736749-24947-1-git-send-email-loic.poulain@linaro.org [mani: fixed a spelling mistake in commit description] Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: core: Validate channel ID when processing command completionsBhaumik Bhatt
MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: pci_generic: Apply no-op for wake using sideband wake booleanBhaumik Bhatt
Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses mhi_device_get() API or the equivalent debugfs entry. Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org Fixes: e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations") Cc: stable@vger.kernel.org #5.12 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21drm/ttm: add missing NULL checksPavel Skripkin
My local syzbot instance hit GPF in ttm_bo_release(). Unfortunately, syzbot didn't produce a reproducer for this, but I found out possible scenario: drm_gem_vram_create() <-- drm_gem_vram_object kzalloced (bo embedded in this object) ttm_bo_init() ttm_bo_init_reserved() ttm_resource_alloc() man->func->alloc() <-- allocation failure ttm_bo_put() ttm_bo_release() ttm_mem_io_free() <-- bo->resource == NULL passed as second argument *GPF* Added NULL check inside ttm_mem_io_free() to prevent reported GPF and make this function NULL save in future. Same problem was in ttm_bo_move_to_lru_tail() as Christian reported. ttm_bo_move_to_lru_tail() is called in ttm_bo_release() and mem pointer can be NULL as well as in ttm_mem_io_free(). Fail log: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] ... RIP: 0010:ttm_mem_io_free+0x28/0x170 drivers/gpu/drm/ttm/ttm_bo_util.c:66 .. Call Trace: ttm_bo_release+0xd94/0x10a0 drivers/gpu/drm/ttm/ttm_bo.c:422 kref_put include/linux/kref.h:65 [inline] ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:470 [inline] ttm_bo_init_reserved+0x7cb/0x960 drivers/gpu/drm/ttm/ttm_bo.c:1050 ttm_bo_init+0x105/0x270 drivers/gpu/drm/ttm/ttm_bo.c:1074 drm_gem_vram_create+0x332/0x4c0 drivers/gpu/drm/drm_gem_vram_helper.c:228 Fixes: d3116756a710 ("drm/ttm: rename bo->mem and make it a pointer") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210708112518.17271-1-paskripkin@gmail.com
2021-07-21serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driverAndy Shevchenko
Elkhart Lake UARTs are PCI enumerated Synopsys DesignWare v4.0+ UART integrated with Intel iDMA 32-bit DMA controller. There is a specific driver to handle them, i.e. 8250_lpss. Hence, disable 8250_pci enumeration for these UARTs. Fixes: 1b91d97c66ef ("serial: 8250_lpss: Add ->setup() for Elkhart Lake ports") Fixes: 4f912b898dc2 ("serial: 8250_lpss: Enable HS UART on Elkhart Lake") Cc: stable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210713101739.36962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: 8250: fix handle_irq lockingJohan Hovold
The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Add back an irqrestore-version of the sysrq port-unlock helper and use it in the 8250 callbacks that need it. Fixes: 75f4e830fa9c ("serial: do not restore interrupt state in sysrq helper") Cc: stable@vger.kernel.org # 5.13 Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210714080427.28164-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: tegra: Only print FIFO error message when an error occursJon Hunter
The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by displaying the error message, only when an error occurs. Finally, update the error message to make it clear that enabling the FIFO failed and display the error code. Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status") Cc: <stable@vger.kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: 8250: Mask out floating 16/32-bit bus bitsMaciej W. Rozycki
Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21serial: max310x: Unprepare and disable clock in error pathAndy Shevchenko
In one error case the clock may be left prepared and enabled. Unprepare and disable clock in that case to balance state of the hardware. Fixes: d4d6f03c4fb3 ("serial: max310x: Try to get crystal clock rate from property") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210625153733.12911-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21staging: rtl8723bs: Fix a resource leak in sd_int_dpcXiangyang Zhang
The "c2h_evt" variable is not freed when function call "c2h_evt_read_88xx" failed Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210628152239.5475-1-xyz.sun.ok@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"Vincent Palatin
This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd. While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not setWei Yongjun
Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 18:08:17 +0000