summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-13ice: Add correct PHY lane assignmentKarol Kolacinski
Driver always naively assumes, that for PTP purposes, PHY lane to configure is corresponding to PF ID. This is not true for some port configurations, e.g.: - 2x50G per quad, where lanes used are 0 and 2 on each quad, but PF IDs are 0 and 1 - 100G per quad on 2 quads, where lanes used are 0 and 4, but PF IDs are 0 and 1 Use correct PHY lane assignment by getting and parsing port options. This is read from the NVM by the FW and provided to the driver with the indication of active port split. Remove ice_is_muxed_topo(), which is no longer needed. Fixes: 4409ea1726cb ("ice: Adjust PTP init for 2x50G E825C devices") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix ETH56G FC-FEC Rx offset valueKarol Kolacinski
Fix ETH56G FC-FEC incorrect Rx offset value by changing it from -255.96 to -469.26 ns. Those values are derived from HW spec and reflect internal delays. Hex value is a fixed point representation in Q23.9 format. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix quad registers read on E825Karol Kolacinski
Quad registers are read/written incorrectly. E825 devices always use quad 0 address and differentiate between the PHYs by changing SBQ destination device (phy_0 or phy_0_peer). Add helpers for reading/writing PTP registers shared per quad and use correct quad address and SBQ destination device based on port. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix E825 initializationKarol Kolacinski
Current implementation checks revision of all PHYs on all PFs, which is incorrect and may result in initialization failure. Check only the revision of the current PHY. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13Merge tag 'md-6.14-20250113' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.14/block Pull MD updates from Song: "1. Reintroduce md-linear, by Yu Kuai. 2. md-bitmap refactor and fix, by Yu Kuai. 3. Replace kmap_atomic with kmap_local_page, by David Reaver." * tag 'md-6.14-20250113' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux: md/md-bitmap: move bitmap_{start, end}write to md upper layer md/raid5: implement pers->bitmap_sector() md: add a new callback pers->bitmap_sector() md/md-bitmap: remove the last parameter for bimtap_ops->endwrite() md/md-bitmap: factor behind write counters out from bitmap_{start/end}write() md: Replace deprecated kmap_atomic() with kmap_local_page() md: reintroduce md-linear
2025-01-13nvme: fix bogus kzalloc() return check in nvme_init_effects_log()Jens Axboe
nvme_init_effects_log() returns failure when kzalloc() is successful, which is obviously wrong and causes failures to boot. Correct the check. Fixes: d4a95adeabc6 ("nvme: Add error path for xa_store in nvme_init_effects") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-13Merge tag 'mm-hotfixes-stable-2025-01-13-00-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM. All patches are singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fs/proc: fix softlockup in __read_vmcore (part 2) mm: fix assertion in folio_end_read() mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled. vmstat: disable vmstat_work on vmstat_cpu_down_prep() zram: fix potential UAF of zram table selftests/mm: set allocated memory to non-zero content in cow test mm: clear uffd-wp PTE/PMD state on mremap() module: fix writing of livepatch relocations in ROX text mm: zswap: properly synchronize freeing resources during CPU hotunplug Revert "mm: zswap: fix race between [de]compression and CPU hotunplug" hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode mm: fix div by zero in bdi_ratio_from_pages x86/execmem: fix ROX cache usage in Xen PV guests filemap: avoid truncating 64-bit offset to 32 bits tools: fix atomic_set() definition to set the value correctly mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit" scripts/decode_stacktrace.sh: fix decoding of lines with an additional info mm/kmemleak: fix percpu memory leak detection failure
2025-01-13hwmon: pmbus: dps920ab: Add ability to instantiate through i2cDenis Kirjanov
Add support for instantiating the Delta DPS920AB PSU through I2C on systems without devicetree support. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Link: https://lore.kernel.org/r/20250113092846.10786-1-kirjanov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-13md/md-bitmap: move bitmap_{start, end}write to md upper layerYu Kuai
There are two BUG reports that raid5 will hang at bitmap_startwrite([1],[2]), root cause is that bitmap start write and end write is unbalanced, it's not quite clear where, and while reviewing raid5 code, it's found that bitmap operations can be optimized. For example, for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to the array: ┌────────────────────────────────────────────────────────────┐ │chunk 0 │ │ ┌────────────┬─────────────┬─────────────┬────────────┼ │ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │ │ ┼────────────┼─────────────┼─────────────┼────────────┼ │ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │ ┼──────┴────────────┴─────────────┴─────────────┴────────────┼ │chunk 1 │ │ ┌────────────┬─────────────┬─────────────┬────────────┤ │ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│ │ ┼────────────┼─────────────┼─────────────┼────────────┼ │ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│ └──────┴────────────┴─────────────┴─────────────┴────────────┘ Before this patch, 4 stripe head will be used, and each sh will attach bio for 3 disks, and each attached bio will trigger bitmap_startwrite() once, which means total 12 times. - 3 times (0 + 4k), for (A0, A1 and A2) - 3 times (4 + 4k), for (B0, B1 and B2) - 3 times (8 + 4k), for (C0, C1 and C3) - 3 times (12 + 4k), for (D0, D1 and D3) After this patch, md upper layer will calculate that IO range (0 + 48k) is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite() just once. Noted that this patch will align bitmap ranges to the chunks, for example, if user issue a IO (0 + 4k) to array: - Before this patch, 1 time (0 + 4k), for A0; - After this patch, 1 time (0 + 8k) for chunk 0; Usually, one bitmap bit will represent more than one disk chunk, and this doesn't have any difference. And even if user really created a array that one chunk contain multiple bits, the overhead is that more data will be recovered after power failure. Also remove STRIPE_BITMAP_PENDING since it's not used anymore. [1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/ [2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13md/raid5: implement pers->bitmap_sector()Yu Kuai
Bitmap is used for the whole array for raid1/raid10, hence IO for the array can be used directly for bitmap. However, bitmap is used for underlying disks for raid5, hence IO for the array can't be used directly for bitmap. Implement pers->bitmap_sector() for raid5 to convert IO ranges from the array to the underlying disks. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250109015145.158868-5-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13md: add a new callback pers->bitmap_sector()Yu Kuai
This callback will be used in raid5 to convert io ranges from array to bitmap. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Link: https://lore.kernel.org/r/20250109015145.158868-4-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()Yu Kuai
For the case that IO failed for one rdev, the bit will be mark as NEEDED in following cases: 1) If badblocks is set and rdev is not faulty; 2) If rdev is faulty; Case 1) is useless because synchronize data to badblocks make no sense. Case 2) can be replaced with mddev->degraded. Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since case 2) no longer use them. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()Yu Kuai
behind_write is only used in raid1, prepare to refactor bitmap_{start/end}write(), there are no functional changes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Xiao Ni <xni@redhat.com> Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13hwmon: (pwm-fan) Default to the Maximum cooling level if providedPeter Korsgaard
The pwm-fan driver uses full PWM (255) duty cycle at startup, which may not always be desirable because of noise or power consumption peaks. The driver optionally accept a list of "cooling-levels" for the thermal subsystem. If provided, use the PWM value corresponding to the maximum cooling level rather than the full level as the initial PWM setting. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20250113135118.3994998-1-peter@korsgaard.com [groeck: Dropped double empty line] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-13md: Replace deprecated kmap_atomic() with kmap_local_page()David Reaver
kmap_atomic() is deprecated and should be replaced with kmap_local_page() [1][2]. kmap_local_page() is faster in kernels with HIGHMEM enabled, can take page faults, and allows preemption. According to [2], this is safe as long as the code between kmap_atomic() and kunmap_atomic() does not implicitly depend on disabling page faults or preemption. It appears to me that none of the call sites in this patch depend on disabling page faults or preemption; they are all mapping a page to simply extract some information from it or print some debug info. [1] https://lwn.net/Articles/836144/ [2] https://docs.kernel.org/mm/highmem.html#temporary-virtual-mappings Signed-off-by: David Reaver <me@davidreaver.com> Link: https://lore.kernel.org/r/20250108192131.46843-1-me@davidreaver.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13md: reintroduce md-linearYu Kuai
THe md-linear is removed by commit 849d18e27be9 ("md: Remove deprecated CONFIG_MD_LINEAR") because it has been marked as deprecated for a long time. However, md-linear is used widely for underlying disks with different size, sadly we didn't know this until now, and it's true useful to create partitions and assemble multiple raid and then append one to the other. People have to use dm-linear in this case now, however, they will prefer to minimize the number of involved modules. Fixes: 849d18e27be9 ("md: Remove deprecated CONFIG_MD_LINEAR") Cc: stable@vger.kernel.org Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Coly Li <colyli@kernel.org> Acked-by: Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20250102112841.1227111-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org>
2025-01-13mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/20250111185410.183896-1-krzysztof.kozlowski@linaro.org>/ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-01-13mmc: Use of_property_present() for non-boolean propertiesRob Herring (Arm)
The use of of_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/all/20250109155255.3438450-1-robh@kernel.org/ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-01-13nouveau/fence: handle cross device fences properlyDave Airlie
The fence sync logic doesn't handle a fence sync across devices as it tries to write to a channel offset from one device into the fence bo from a different device, which won't work so well. This patch fixes that to avoid using the sync path in the case where the fences come from different nouveau drm devices. This works fine on a single device as the fence bo is shared across the devices, and mapped into each channels vma space, the channel offsets are therefore okay to pass between sides, so one channel can sync on the seqnos from the other by using the offset into it's vma. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Ben Skeggs <bskeggs@nvidia.com> [ Fix compilation issue; remove version log from commit messsage. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250109005553.623947-1-airlied@gmail.com
2025-01-13nbd: fix partial sendingMing Lei
nbd driver sends request header and payload with multiple call of sock_sendmsg, and partial sending can't be avoided. However, nbd driver returns BLK_STS_RESOURCE to block core in this situation. This way causes one issue: request->tag may change in the next run of nbd_queue_rq(), but the original old tag has been sent as part of header cookie, this way confuses nbd driver reply handling, since the real request can't be retrieved any more with the obsolete old tag. Fix it by retrying sending directly in per-socket work function, meantime return BLK_STS_OK to block layer core. Cc: vincent.chen@sifive.com Cc: Leon Schuermann <leon@is.currently.online> Cc: Bart Van Assche <bvanassche@acm.org> Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Link: https://lore.kernel.org/r/20241029011941.153037-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-13wifi: iwlwifi: simplify nested if checksJohannes Berg
In the absence of (an) else clause(s), "if (a) if (b)" is equivalent to "if (a && b)", so simplify the code a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250102161730.7ddc9cb1ea50.If18bd94706d6c821e34c38a4704bf85dca6207b2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: rename iwl_datapath_monitor_notif::mac_id to link_idMiri Korenblit
The FW really sends the link_id here. Rename it, while leaving a FIXME in iwlmvm. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241231135726.a3d07be17fb1.Ib8a623af099b9b0f2b8d552fca546c476a69a82d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: pcie: make iwl_pcie_d3_complete_suspend() staticJohannes Berg
The function is only used in the same file, so it can trivially be static. Do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.c09d2251824c.Ibcfbb4bbe27a0767a1da4a5897b2b0f70193dc3d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: pcie: make _iwl_trans_pcie_gen2_stop_device() staticJohannes Berg
This function isn't used outside the file it's implemented in, so make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.060c01653d4e.I3f0675b3977e474b633ff10965fe6512f34ae593@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: remove unused tas_rsp variableAnjaneyulu
optimize local variable usage in iwl_dbgfs_tas_get_status_read(). Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.fab845da5c6f.Ica84a4c0df33db9c9b6baef28893bb42e1f367b7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: handle version 3 GET_TAS_STATUS notificationAnjaneyulu
Add a check to ensure only version-3 of GET_TAS_STATUS notification is allowed. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.1d571ac80957.Ia48b1cf5585a2a9f9c461e80f5a0ba2bb16c3af4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: extend TAS_CONFIG cmd support for v5Anjaneyulu
Extend TAS_CONFIG to send exact data read from bios to firmware without filtering/altering bios data. This enables driver becoming purely a pipe for TAS features. Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.f46d58e7cfd1.Ifd81e632fa3e7039b8d139ee0d1c24e09669dff5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: remove Mr/Ms radioJohannes Berg
This radio never shipped, so we don't need to have it in the code. Remove the configurations and a few lines of code for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.9f984db3efa0.I5a39ec951430e765bdea49ff150dd41af5e911f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: add WIKO to PPAG approved listAnjaneyulu
Add WIKO to the list of the OEMs that are allowed to use the PPAG feature Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.d2ba5aee512a.I529cfefabd04c64d801895d6a274e3225a952090@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: support EMLSR on WH/PEJohannes Berg
Unlike FM which only supported EMLSR on B-step and later, here it can be supported starting from A-step. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.65a3b822e002.I4d6f10e02686f1cc159121cf702d6b747cab5b8a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: config: unify fw/pnvm MODULE_FIRMWAREJohannes Berg
All newer devices now require PNVM files, so don't list them separately but simply generate the relevant MODULE_FIRMWARE() declarations together. This simplifies the code and adds a large number of missing PVNM declarations. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.302e521e08e9.I782513432d3dcbf801e8262522ded95302548e1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: improve/fix chanctx min_def use logicJohannes Berg
There are two cases in which the min_def isn't used: a) if FILS will be enabled b) if FTM responder is enabled Both of these apply to AP mode only, but for FILS we're not checking that right now. Change the code to iterate the interfaces and links using the channel context, and check for AP mode for both, not just for FTM responder. In the case of iwl_mvm_enable_fils() this might also fix an issue where FILS is enabled for an IBSS network that happens to be started on 6 GHz, though that's not very likely to be possible due to regulatory. However for RX OMI bandwidth reduction the driver needs to use the min_def in client mode as well, in order to actually reduce bandwidth when it requested that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.7b91025e103d.I4c99c03fd32363d574ab5e34798b6099401f0729@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: implement reset escalationJohannes Berg
If the normal reset methods don't work well, attempt to escalate to ever increasing methods. TOP reset will only be available for SC (and presumably higher) devices, and still needs to be filled in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.804e005403d8.I9558f09cd68eec16b02373b1e47adafd28fdffa3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: implement product reset for TOP errorsJohannes Berg
The TOP is a shared (between BT and WiFi) hardware component, and if it has an error we need to reset the whole device, i.e. both BT and WiFi. This is achieved by calling a specific ACPI DSM (device-specific method) with the right arguments before doing a reset via the object referenced by _PRR. Since this is needed here, but a function reset will always do better than just re-enumerating the bus in case of errors, we can always try to at least do a function reset and do the full product reset only when needed for TOP errors. Also, for some Bz and Sc devices where BT is PCIe/IOSF as well, find the BT device and unbind that device as well so the BT driver can recover from the reset that's going to happen, rather than having to somehow detect that the device was reset. Also add - currently unused - the function reset mode, this is going to get used in the upcoming escalation model. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.5b0f846d3e13.Ia14ccac38ac3d48adf5f341b17c7e34ccc41c065@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: get the max number of links from the firmwareEmmanuel Grumbach
The firmware advertises the maximum number of links. Use it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.5eb29510f2b4.I7f35f61987c2ee905960ee476df6803632b0feb8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: pcie: check for WiAMT/CSME presenceJohannes Berg
In order to know whether or not a product reset can safely be done (without risking locking up the system completely), check for ME presence with the known methods. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241231135726.0ac9173f1f37.Id83b80b61548b8f4f01e96a356dafe063543c4ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: fw: fix repeated words in commentsJilin Yuan
Delete the redundant word 'for'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://msgid.link/20220709140036.48913-1-yuanjilin@cdjrlc.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.2981c3b5a40e.I96ebda41f230d453d4bc0afb01ac43011c13a182@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: Fix duplicated 'the' in commentMiri Korenblit
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.76502dda646b.I0a1d012eaa1cd8d39430cde981cae8c4cc058442@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: Fix duplicated 'if' in commentJason Wang
The double `if' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://msgid.link/20220811115958.8423-1-wangborong@cdjrlc.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.9d8c224e9d4c.Iaacfbd1e9432f31d5d7d037ad925aadbb0d5c4d6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: Remove a duplicate assignment in iwl_dbgfs_amsdu_len_write()Minjie Du
Delete a duplicate statement from this function implementation. Signed-off-by: Minjie Du <duminjie@vivo.com> Link: https://msgid.link/20230705114934.16523-1-duminjie@vivo.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.b1b0dadc2e9e.Ie57cbe8039b9f388632141447ac910b6fcc3d0c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: Use helper function IS_ERR_OR_NULL()Miri Korenblit
Use IS_ERR_OR_NULL() instead of open-coding it to simplify the code. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.d3423626d981.I3b4cc7f19d1bfecdb2e6a4eba8da1c7a41461115@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: Fix spelling typo in commentshitao
Fix spelling typo in iwl-context-info.h comment. Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: shitao <shitao@kylinos.cn> Link: https://msgid.link/20231212093424.3104329-1-shitao@kylinos.cn Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.c79c132f811b.Ie07a0007b96359b3552878e23c4b9efeb07bba8d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: api: remove the double wordDeming Wang
Remove the duplicate "the". Signed-off-by: Deming Wang <wangdeming@inspur.com> Link: https://msgid.link/20240318054853.2352-1-wangdeming@inspur.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.7b385f337e46.Iae60151e718f344098058b0e4fa6f6c1e43cb414@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: fix iwl_ssid_exist() checkMiri Korenblit
iwl_ssid_exist() seems to check if a given ssid/ssid_len already exists in a given array ssid_list. Correctly compare the ssid to the SSID of each array element (with a matching SSID length) to better remove duplicates. Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.org> Sponsored by: The FreeBSD Foundation Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Daniel Gabay <daniel.gabay@intel.com> Link: https://patch.msgid.link/20241229164246.4471cd3d8dba.Iab8409b22bf6f01d05571ecef1e97dd3c8b1cc75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: Improve code style in pointer declarationsJuan José Arboleda
The changes ensure that there is a space between the `u8` type and the `*` character as preferred by the guidelines. This change is purely stylistic and do not affect the functionality of the code. Signed-off-by: Juan José Arboleda <soyjuanarbol@gmail.com> Link: https://msgid.link/10b6d4945675cada713e819f7bd6782a66a1c0d2.1724103043.git.soyjuanarbol@gmail.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.f09a200be4f8.Ia564ae1c59136bd3c2864ccfb3a244b3257dcd5f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: fw: fix typo 'adderss'Gan Jie
Fix typo 'adderss' to 'address'. Signed-off-by: Gan Jie <ganjie182@gmail.com> Link: https://msgid.link/20241101143052.1531-1-ganjie182@gmail.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20241229164246.ad8978ee5673.I388e314a4be8333192b3994f43efa5dbd3ac715d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: remove unneeded NULL pointer checksEmmanuel Grumbach
Smatch reported that we dereference the data pointer to calculate the expected length before we check it's not NULL. While this is true (and hence needs to be fixed), this will never happen because the data pointer comes from struct iwl_rx_packet object which has the following layout: struct iwl_rx_packet { __le32 len_n_flags; struct iwl_cmd_header hdr; u8 data[]; } __packed; So, if the pointer to iwl_rx_packet is valid, data will be valid as well. Remove the NULL pointer check on 'data' to avoid confusing smatch. Also remove the check from similar functions in the same flow that were cargo cult copy-pasted. Fixes: 4635e6eaa0fe ("wifi: iwlwifi: mvm: support new versions of the wowlan APIs") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202411210812.0eLaonw3-lkp@intel.com/ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.c8ce6e041e4b.I4dc19289e3f3807386768c846e08be3ea322cd15@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: fix AP STA comparisonJohannes Berg
This should be comparing the AP STA, not the deflink firmware STA ID. Correct the implementation so that statistics can be requested for the AP, but not for other stations that may end up with the firmware STA ID matching 0 in the deflink, or so. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.08b05aca37cf.Iba1a6a637a758691f710dc4f3f03bd1d960fb087@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: cleanup unused variable in trans.hEmmanuel Grumbach
Remove unused fields from the transport API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.1d04ce18a0ec.Ibfac364163b55b52196d30ff2b43945c5aa804a9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13wifi: iwlwifi: mvm: don't count mgmt frames as MPDUDaniel Gabay
When handling TX_CMD notification, for mgmt frames tid is equal to IWL_MAX_TID_COUNT, so with the current logic we'll count that as MPDU, fix that. Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241229164246.80b119bb5d08.I31b1e8ba25cce15819225e5ac80332e4eaa20c13@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 04:26:00 +0000