summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-05-23drm/i915: Store BXT DE PLL vco and ref clocks in dev_privVille Syrjälä
We have need to know the DE PLL refclk and output frequency in various cdclk calculations, so let's store those in dev_priv. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-17-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Extract bxt DE PLL enable/disable from broxton_set_cdclk()Ville Syrjälä
Enabling and disalbing the DE PLL are two nice self contained operations, so let's move them into a few small helper functions. Makes it easier to see the forest from the trees in broxton_set_cdclk(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-16-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Store cdclk PLL reference clock under dev_privVille Syrjälä
Future platforms will have multiple options for the cdclk PLL reference clock, so let's start tracking that under dev_priv alreday on SKL, although on SKL it's always 24 MHz. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-15-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Rename skl_vco_freq to cdclk_pll.vcoVille Syrjälä
We'll want to store the cdclk PLL (whatever PLL that is in reality) vco frequency somewhere on other platforms too, so let's rename the skl_vco_freq to cdclk_pll.vco, and let's store it in kHz instead of MHz to match most of the other clocks. v2: Drop the spurious > vs != change (Imre) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-14-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Make 308 and 671 MHz cdclks more accurate on SKLVille Syrjälä
The SKL 308.57 MHz cdclk is probably 8640/28 = ~308.571 Mhz. Similartly the 617.14 MHz cdclk is probably 8640/14 = ~617.143 MHz. Let's use the slightly more accurate numbers. Potentially we might change to computing all of these based on dividers, but let's stick to the current theme for now.. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-13-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Move SKL+ DBUF enable/disable to display core init/uninitVille Syrjälä
SKL and BXT have the same snippets of code for enabling disabling the DBUF. Extract those into helpers and move the calls from init/unit_cdclk() to the display core init/init since this stuff isn't really about cdclk. Also doing the enable twice shouldn't hurt since you're just setting the request bit again when it was already set. We can also toss in a few WARNs about the register values into skl_get_dpll0_vco() now that we know that things should always be sane there. Flatten skl_init_cdclk() while at it. v2: s/skl/gen9/ in function names (Imre) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-12-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Unify SKL cdclk init pathsVille Syrjälä
Currently we initialize cdclk on SKL from two different places, depending on whether it's during driver init or resume. Let's unify it to happen from the same place always, and that place will be the display core init function. To do this we first run through the cdclk sanitation code, which will first verify that the PLL is programmed correctly, after which we can read out the current cdclk frequency, and once the cdclk is known we verify that the cdclk "decimal" frequency is programmed correctly. If any of these fail we will force a cdclk change, and to be safe we also force the PLL to be turned off and on again. If the sanitation step didn't notice anything amiss, we'll skip the cdclk programming which will prevent cdclk reprogramming when the displays might be active. We can also toss in a few WARNs about the register values into skl_update_dpll0() since we now know that the PLL state should always be sane when that function is called. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-11-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Beef up skl_sanitize_cdclk() a bitVille Syrjälä
Also verify the DPLL_CTRL1 register value in skl_sanitize_cdclk(), throw out a few unneeded variables, and write the CDCLK_CTL check a bit more legible way. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-10-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Keep track of preferred cdclk vco frequency on SKLVille Syrjälä
Now that skl_vco_freq tracks the actual DPLL0 vco frequency, we'll need something that keeps track of which vco frequency we want to use in case the current vco is 0. This would be important across supend/resume since we'll disable DPLL0 around those parts. We'll also update our idea of max cdclk/dotclock when the preferred vco changes. That could happen if out initial guess was wrong, and later eDP would force us to change it. One issue here could be that changing the max dotclock could cause our mode list to change during next time the displays get probed. But I don't see a good way to avoid that, except perhaps by allowing either vco frequency to be used as needed. But the docs suggest that such usage wasn't really inteded. Also need to make sure we don't update our max_cdclk value before we have a preferred vco value, which means moving that to happen after the cdclk sanitation. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-9-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Allow enable/disable of DPLL0 around cdclk changes on SKLVille Syrjälä
In case we originally guessed wrong which lcpll vco frequency to use, we will need to shut down the pll and restart it when reprogamming the cdclk. This also allows us to track the actual vco frequency in dev_priv instead of just a guess. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-8-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Report the current DPLL0 vco on SKL/KBLVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-7-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Actually read out DPLL0 vco on skl from hardwareVille Syrjälä
Currently we're trying to guess which lcpll vco frequency is used use based on the cdclk. That doesn't work for cdclk==540 since both vco frequencies can generate a 540 Mhz output. Let's stop guessing and just read the actual vco frequency from the hardware. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-6-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Extract skl_calc_cdclk()Ville Syrjälä
We have many places where we want to pick a suitable cdclk frequency for skl based on the dotclock and lcpll vco. Split that code into a small helper and call it from all over. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-5-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915: Move the SKL DPLL0 VCO computation into intel_dp_compute_config()Ville Syrjälä
Shared plls won't get assigned until the .compute_clocks() hook gets called, which happens from the crtc .atomic_check hook. That's too late as the cdclk computation has already happened. So let's move the DPLL0 VCO computation into intel_dp_compute_config() so that it's done when the cdclk computation happens. Also only do it for eDP since we only pick DPLL0 for eDP. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915/skl: SKL CDCLK change on modeset tracking VCOClint Taylor
WARNING: Using ChromeOS with an eDP panel and a 4K@60 DP monitor connected to DDI1 the system will hard hang during a cold boot. Occurs when DDI1 is enabled when the cdclk is less then required. DP connected to DDI2 and HPD on either port works correctly. Set cdclk based on the max required pixel clock based on VCO selected. Track boot vco instead of boot cdclk. The vco is now tracked at the atomic level and all CRTCs updated if the required vco is changed. Not tested with eDP v1.4 panels that require 8640 vco due to availability. V1: initial version V2: add vco tracking in intel_dp_compute_config(), rename skl_boot_cdclk. V3: rebase, V2 feedback not possible as encoders are not aware of atomic. V4: track target vco is atomic state. modeset all CRTCs if vco changes V5: rename atomic variable, cleaner if/else logic, use existing vco if encoder does not return a new vco value. check_patch.pl cleanup V6: simplify logic in intel_modeset_checks. V7: reorder an IF for readability and whitespace fix. V8: use dev_cdclk for tracking new cdclk during atomic V9: correctly handle vco 8640 when crtcs==0 V10: Clean up if else in crtcs==0 V11: Rebase for new intel_dpll_mgr.c Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> [vsyrjala: rebased due to churn] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-3-git-send-email-ville.syrjala@linux.intel.com
2016-05-23drm/i915: Fix BXT min_pixclk after state readoutVille Syrjälä
commit 4e5ca60fd35a ("drm/i915: Use ilk_max_pixel_rate() for BXT cdclk calculation") tried to change BXT to use ilk_max_pixel_rate() to compute the pipe pixel rate. I failed to notice that there was another place in the state readout code that needs the same treatment. So let's change that one too. Should probably just change things to always compuyte the pipe pixel rates, instead of just doing on platforms that can change cdclk dynamically. But for now let's just move BXT fully over to the side that uses ilk_pipe_pixel_rate(). Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 4e5ca60fd35a ("drm/i915: Use ilk_max_pixel_rate() for BXT cdclk calculation") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-05-23drm/i915/opregion: Rename init/fini functions to register/unregisterChris Wilson
Current intel_opregion_init is called during the driver registration phase and intel_opregion_fini from the unregistration phase. Rename the functions so that this is clear from their names. The phases tell us what we expect the existing hw state to be, e.g. whether interrupts are still enabled etc. It should be noted that the opregion init/fini routines are asymmetric and this is carried across into their new names. Indeed, their new names make it even clearer that perhaps all is not well in the opregion suspend/resume sequence (as well in the module unload). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464012490-30961-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
2016-05-23drm/i915/opregion: Convert to using native drm_i915_privateChris Wilson
Prefer passing struct drm_i915_private to internal interfaces as this saves us having to dance between drm_device and our native struct. The savings hare are small (only 70 bytes of unrequired dancing), but progressive! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464012490-30961-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
2016-05-23drm/i915: Enable GSE interrupt on BDW+Ville Syrjälä
We've never actually enabled or unmasked the GSE interrupt on BDW+, even though the interrupt handler was always prepared for it. Let's enable it and see what happens. Credit to Mark Kettenis who fixed this in the OpenBSD fork of the driver. He reports that it fixed the "ACPI _BCM/_BCQ-based brightness mechanism on a MacBookPro12,1 and a 3rd gen Lenovo X1 Carbon" for them. Mark says: "FWIW, this *is* needed if you want ACPI-based backlight control to work. On Linux you probably don't notice, since "hardware" backlight control is preferred over "firmware" or "platform" backlight control. It would help me if this did land in the Linux tree though, as it will make future imports of the i915 driver into OpenBSD easier." So even though we don't really need this, let's put it in to help Mark with future porting efforts. Should be harmless to have it enabled in any case. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/081799.html Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Cc: Mark Kettenis <mark.kettenis@xs4all.nl> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463649283-28698-1-git-send-email-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915/guc: rework guc_add_workqueue_item()Dave Gordon
Mostly little optimisations and future-proofing against code breakage. For instance, if the driver is correctly following the submission protocol, the "out of space" condition is impossible, so the previous runtime WARN_ON() is promoted to a GEM_BUG_ON() for a more dramatic effect in development and less impact in end-user systems. Similarly we can make alignment checking more stringent and replace other WARN_ON() conditions that don't relate to the runtime hardware state with either BUILD_BUG_ON() for compile-time-detectable issues, or GEM_BUG_ON() for logical "can't happen" errors. With those changes, we can convert it to void, as suggested by Chris Wilson, and update the calling code appropriately. v2: Note that we're now putting the request seqno in the "fence_id" field of each GuC-work-item, in case it turns up somewhere useful (e.g. in a GuC log) [Tvrtko Ursulin]. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-05-23drm/i915/guc: don't spinwait if the GuC's workqueue is fullDave Gordon
Rather than wait to see whether more space becomes available in the GuC submission workqueue, we can just return -EAGAIN and let the caller try again in a little while. This gets rid of an uninterruptable sleep in the polling code :) We'll also add a counter to the GuC client statistics, to see how often we find the WQ full. v2: Flag the likely() code path (Tvtrko Ursulin). v4: Add/update comments about failure counters (Tvtrko Ursulin). Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-05-23drm/i915/guc: pass request (not client) to i915_guc_{wq_check_space, submit}()Dave Gordon
The knowledge of how to derive the relevant client from the request should be localised within i915_guc_submission.c; the LRC code shouldn't have to know about the internal details of the GuC submission process. And all the information the GuC code needs should be encapsulated in (or reachable from) the request. v2: GEM_BUG_ON() for bad GuC client (Tvrtko Ursulin). Add/update kerneldoc explaining check_space/submit protocol Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-05-23drm/i915/guc: add enable_guc_loading parameterDave Gordon
Split the function of "enable_guc_submission" into two separate options. The new one ("enable_guc_loading") controls only the *fetching and loading* of the GuC firmware image. The existing one is redefined to control only the *use* of the GuC for batch submission once the firmware is loaded. In addition, the degree of control has been refined from a simple bool to an integer key, allowing several options: -1 (default) whatever the platform default is 0 DISABLE don't load/use the GuC 1 BEST EFFORT try to load/use the GuC, fallback if not available 2 REQUIRE must load/use the GuC, else leave the GPU wedged The new platform default (as coded here) will be to attempt to load the GuC iff the device has a GuC that requires firmware, but not yet to use it for submission. A later patch will change to enable it if appropriate. v4: Changed some error-message levels, mostly ERROR->INFO, per review comments by Tvrtko Ursulin. v5: Dropped one more error message, disabled GuC submission on hypothetical firmware-free devices [Tvrtko Ursulin]. v6: Logging tidy by Tvrtko Ursulin: * Do not log falling back to execlists when wedging the GPU. * Do not log fw load errors when load was disabled by user. * Pass down some error code from fw load for log message to make more sense. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> (v6)
2016-05-23drm/i915/guc: distinguish HAS_GUC() from HAS_GUC_UCODE/HAS_GUC_SCHEDDave Gordon
For now, anything with a GuC requires uCode loading, and then supports command submission once loaded. But these are logically distinct from simply "having a GuC", so we need a separate macro for the latter. Then, various tests should use this new macro rather than HAS_GUC_UCODE() or testing enable_guc_submission. v4: Added a couple more uses of the new macro. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-05-23drm/i915/guc: rename loader entry pointsDave Gordon
The GuC initialisation code could do other things apart from loading firmware, so here we rename the three primary entry points to remove any specific reference to "ucode" (no functional changes, just renaming). Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-05-23drm/i915: Stop automatically retiring requests after a GPU hangChris Wilson
Following a GPU hang, we break out of the request loop in order to unlock the struct_mutex for use by the GPU reset. However, if we retire all the requests at that moment, we cannot identify the guilty request after performing the reset. v2: Not automatically retiring requests forces us to recheck for available ringspace. Fixes: f4457ae71fd6 ("drm/i915: Prevent leaking of -EIO from i915_wait_request()") Testcase: igt/gem_reset_stats/ban-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Tested-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463137042-9669-4-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit e075a32f515becef66dc849f5eca47409ccf5473) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Unify intel_ring_begin()Chris Wilson
Combine the near identical implementations of intel_logical_ring_begin() and intel_ring_begin() - the only difference is that the logical wait has to check for a matching ring (which is assumed by legacy). In the process some debug messages are culled as there were following a WARN if we hit an actual error. v2: Updated commentary Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461833819-3991-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 987046ad65361a8b038fbf8d76d152237fb7acf1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)Ville Syrjälä
When we resume the watermark register may contain some BIOS leftovers, or just the hardware reset values. We should ignore those as the pipes will be off anyway, and so frobbing around with intermediate watermarks doesn't make much sense. In fact I think we should just throw the skip_intermediate_wm flag out, and instead properly sanitize the "active" watermarks to match the current plane and pipe states. The actual wm state readout might also need a bit of work. But for now, let's continue with the skip_intermediate_wm to keep the fix more minimal. Fixes this sort of errors on resume [drm:ilk_validate_pipe_wm] LP0 watermark invalid [drm:intel_crtc_atomic_check] No valid intermediate pipe watermarks are possible [drm:intel_display_resume [i915]] *ERROR* Restoring old state failed with -22 and a boatload of subsequent modeset BAT fails on my ILK. v2: - Rebase; the SKL atomic WM patches that just landed changed the WM structure fields in intel_crtc_state slightly. (Matt) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ed4a6a7ca853 ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463159442-20478-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit e3d5457c7caabb77b3f1d0b09c4a63362e9b04d2) [Jani: rebase on drm-next while cherry-picking] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/mm: avoid possible null pointer dereferenceHeinrich Schuchardt
Do not dereference node before the check if node is NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1463602639-4861-1-git-send-email-xypron.glpk@gmx.de
2016-05-23drm/i915/psr: Try to program link training times correctlyDaniel Vetter
The default of 0 is 500us of link training, but that's not enough for some platforms. Decoding this correctly means we're using 2.5ms of link training on these platforms, which fixes flickering issues associated with enabling PSR. v2: Unbotch the math a bit. v3: Drop debug hunk. v4: Improve commit message. Tested-by: Lyude <cpaul@redhat.com> Cc: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: fritsch@kodi.tv Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463590036-17824-2-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit 50db139018f9c94376d5f4db94a3bae65fdfac14) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23Merge remote-tracking branch 'spi/topic/zynqmp' into spi-nextMark Brown
2016-05-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qup', ↵Mark Brown
'spi/topic/rockchip', 'spi/topic/st-ssc4' and 'spi/topic/xlp' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/omap2-mcspi', ↵Mark Brown
'spi/topic/orion', 'spi/topic/pic32' and 'spi/topic/pic32-qspi' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/flash-read', ↵Mark Brown
'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/kconfig' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', ↵Mark Brown
'spi/topic/davinci' and 'spi/topic/dln2' into spi-next
2016-05-23Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2016-05-23drm/imx: Match imx-ipuv3-crtc components using device node in platform dataPhilipp Zabel
The component master driver imx-drm-core matches component devices using their of_node. Since commit 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading"), the imx-ipuv3-crtc dev->of_node is not set during probing. Before that, of_node was set and caused an of: modalias to be used instead of the platform: modalias, which broke module autoloading. On the other hand, if dev->of_node is not set yet when the imx-ipuv3-crtc probe function calls component_add, component matching in imx-drm-core fails. While dev->of_node will be set once the next component tries to bring up the component master, imx-drm-core component binding will never succeed if one of the crtc devices is probed last. Add of_node to the component platform data and match against the pdata->of_node instead of dev->of_node in imx-drm-core to work around this problem. Cc: <stable@vger.kernel.org> # 4.4.x Fixes: 950b410dd1ab ("gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
2016-05-23mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllersAdrian Hunter
The CMD19/CMD14 bus width test has been found to be unreliable in some cases. It is not essential, so simply remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllersAdrian Hunter
The CMD19/CMD14 bus width test has been found to be unreliable in some cases. It is not essential, so simply remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23mmc: longer timeout for long read time quirkMatt Gumbel
008GE0 Toshiba mmc in some Intel Baytrail tablets responds to MMC_SEND_EXT_CSD in 450-600ms. This patch will... () Increase the long read time quirk timeout from 300ms to 600ms. Original author of that quirk says 300ms was only a guess and that the number may need to be raised in the future. () Add this specific MMC to the quirk Signed-off-by: Matt Gumbel <matthew.k.gumbel@intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23mmc: dw_mmc: rockchip: Set the drive phase properlyDouglas Anderson
Historically for Rockchip devices we've relied on the power-on default (or perhaps the firmware setting) to get the correct drive phase for dw_mmc devices. This worked OK for the most part, but: * Relying on the setting just "being right" is a bit fragile. * As soon as there is an instance where the power on default is wrong or where the firmware didn't configure this properly then we'll get a mysterious failure. In commit 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") we actually started setting this explicitly in the kernel, but that commit wasn't quite right and also wasn't quite enough. See <https://patchwork.kernel.org/patch/9085311/> for some details. Let's explicitly set this phase in dw_mmc. The comments inside this patch try to explain the situation quite throughly, but the high level overview of this is: Before this patch on rk3288 devices tested (after revert of the clock patch described above): * eMMC: 180 degrees * SDMMC/SDIO0/SDIO1: 90 degrees After this patch: * Use 90 degree phase offset usually. * Use 180 degree phase offset for MMC_DDR52, SDR104, HS200. That means we are _changing_ behavior for those devices in this way: * If we have HS200 eMMC or DDR52 eMMC, we'll run ID mode at 90 degrees (vs 180) but otherwise have no change. * For any non-HS200 / non-DDR52 eMMC devices we'll now _always_ run at 90 degrees (vs 180). It seems fairly unlikely that building modern hardware is using an eMMC that isn't using DDR52 or HS200, of course. * For SDR104 cards we'll now run with 180 degree phase offset (vs 90). It's expected that 90 degree phase offset would have worked OK, but this gives us extra margin. I have tested this by inserting my collection of uSD cards (mostly UHS, though a few not) into a veyron_minnie and confirmed that they still seem to enumerate properly. For a subset of them I tried putting a filesystem on them and also tried running mmc_test. Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23mmc: dw_mmc: fix the wrong max_blk_sizeJaehoon Chung
According to DesignWare TRM, BLKSIZ is 16bits. Then it's correct that max_blk_size should be 0xFFFF, not 0x10000. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilitiesShawn Lin
Add MMC_CAP_CMD23 for dw_mmc-rockchip, otherwise failing to create rpmb partition. With it, we can get rpmb successfully: mmc1: new HS200 MMC card at address 0001 mmcblk0: mmc1:0001 DS2016 14.7 GiB mmcblk0boot0: mmc1:0001 DS2016 partition 1 4.00 MiB mmcblk0boot1: mmc1:0001 DS2016 partition 2 4.00 MiB mmcblk0rpmb: mmc1:0001 DS2016 partition 3 4.00 MiB Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-23drm/i915/bxt: Adjusting the error in horizontal timings retrievalRamalingam C
In BXT DSI there is no regs programmed with few horizontal timings in Pixels but txbyteclkhs.. So retrieval process adds some ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. Actually here for the given adjusted_mode, we are calculating the value programmed to the port and then back to the horizontal timing param in pixels. This is the expected value at the end of get_config, including roundup errors. And if that is same as retrieved value from port, then retrieved (HW state) adjusted_mode's horizontal timings are corrected to match with SW state to nullify the errors. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-2-git-send-email-ramalingam.c@intel.com (cherry picked from commit 042ab0c3c40be1efcaad6b526173b5536fc6c3bf) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Don't leave old junk in ilk active watermarks on readoutVille Syrjälä
When we read out the watermark state from the hardware we're supposed to transfer that into the active watermarks, but currently we fail to any part of the active watermarks that isn't explicitly written. Let's clear it all upfront. Looks like this has been like this since the beginning, when I added the readout. No idea why I didn't clear it up. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 243e6a44b9ca ("drm/i915: Init HSW watermark tracking in intel_modeset_setup_hw_state()") Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463151318-14719-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 15606534bf0a65d8a74a90fd57b8712d147dbca6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: s/DPPL/DPLL/ for SKL DPLLsVille Syrjälä
SKL DPLLs shouldn't be called DPPLs. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 2edd6443e3d0 ("drm/i915: Use a table to initilize shared dplls") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462993473-8254-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> (cherry picked from commit d5aab9d40135725cbe81ed5e3af5209382063193) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Fix gen8 semaphores id for legacy modeChris Wilson
With the introduction of a distinct engine->id vs the hardware id, we need to fix up the value we use for selecting the target engine when signaling a semaphore. Note that these values can be merged with engine->guc_id. Fixes: de1add360522c876c25ef2bbbbab1c94bdb509ab Cc: stable@vger.kernel.org # v4.6 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461932305-14637-3-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 215a7e3210eb208abe634480741e418b5a8bf60c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Set crtc_state->lane_count for HDMIAnder Conselvan de Oliveira
Set the lane count for HDMI to 4. This will make it easier to unduplicate CHV phy code. This also fixes the the soft reset programming for HDMI with CHV. After commit a8f327fb8464 ("drm/i915: Clean up CHV lane soft reset programming"), it wouldn't set the right bits for PCS23 since it relied on a lane count that was never set. v2: Set lane_count in *_get_config() to please state checker. (0day) v3: Set lane_count for DDI in DVI mode too. (CI) v4: Add note about CHV soft lane reset. (Ander) Fixes: a8f327fb8464 ("drm/i915: Clean up CHV lane soft reset programming") Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461761065-21195-2-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit d4d6279abe9a4a2d52115bad122118db4995df17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915/BXT: Retrieving the horizontal timing for DSIRamalingam C
Retriving the horizontal timings from the port registers as part of get_config(). This fixes a division by zero: [ 56.916557] divide error: 0000 [#1] PREEMPT SMP [ 56.921741] Modules linked in: i915(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm intel_gtt agpgart cf g80211 rfkill binfmt_misc ax88179_178a kvm_intel kvm irqbypass crc32c_intel efivars tpm_tis tpm fuse [ 56.944106] CPU: 3 PID: 1097 Comm: modprobe Not tainted 4.6.0-rc4+ #433 [ 56.951501] Hardware name: Intel Corp. Broxton M/RVP, BIOS BXT1RVPA.X64.0131.B30.1604142217 04/14/2016 [ 56.961908] task: ffff88007a854d00 ti: ffff88007aea0000 task.ti: ffff88007aea0000 [ 56.970273] RIP: 0010:[<ffffffffa01235b2>] [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 56.980043] RSP: 0018:ffff88007aea3788 EFLAGS: 00010206 [ 56.985982] RAX: 000000000788b600 RBX: ffff880073c22108 RCX: 0000000000000000 [ 56.993957] RDX: 0000000000000000 RSI: ffff88007ab06800 RDI: ffff880073c22108 [ 57.001935] RBP: ffff88007aea3788 R08: 0000000000000001 R09: ffff880073c221e8 [ 57.009903] R10: ffff880073c22108 R11: 0000000000000001 R12: ffff88007a300000 [ 57.017872] R13: ffff880073c22000 R14: ffff880175f78000 R15: ffff880175f78798 [ 57.025849] FS: 00007f105d3e6700(0000) GS:ffff88017fd80000(0000) knlGS:0000000000000000 [ 57.034894] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.041317] CR2: 00007f4d485101d0 CR3: 000000007a820000 CR4: 00000000003406e0 [ 57.049292] Stack: [ 57.051539] ffff88007aea37a0 ffffffffa043b632 ffff880175f787c8 ffff88007aea3810 [ 57.059825] ffffffffa043d59e ffff880175f787b0 ffff88007ab68c00 ffff88007aea37f0 [ 57.068128] ffff880073c221e8 ffff880073c22108 ffff880175f78780 ffff880100000000 [ 57.076430] Call Trace: [ 57.079254] [<ffffffffa043b632>] intel_mode_from_pipe_config+0x82/0xb0 [i915] [ 57.087405] [<ffffffffa043d59e>] intel_modeset_setup_hw_state+0x55e/0xd60 [i915] [ 57.095847] [<ffffffffa043ff94>] intel_modeset_init+0x8e4/0x1630 [i915] [ 57.103415] [<ffffffffa047bcf0>] i915_driver_load+0xbe0/0x1980 [i915] [ 57.110745] [<ffffffffa0116c19>] drm_dev_register+0xa9/0xc0 [drm] [ 57.117681] [<ffffffffa011921d>] drm_get_pci_dev+0x8d/0x1e0 [drm] [ 57.124600] [<ffffffff8195f942>] ? _raw_spin_unlock_irqrestore+0x42/0x70 [ 57.132253] [<ffffffffa03b0384>] i915_pci_probe+0x34/0x50 [i915] [ 57.139070] [<ffffffff8149c375>] local_pci_probe+0x45/0xa0 [ 57.145303] [<ffffffff8149d300>] ? pci_match_device+0xe0/0x110 [ 57.151924] [<ffffffff8149d6cb>] pci_device_probe+0xdb/0x130 [ 57.158355] [<ffffffff81579b93>] driver_probe_device+0x223/0x440 [ 57.165169] [<ffffffff81579e85>] __driver_attach+0xd5/0x100 [ 57.171500] [<ffffffff81579db0>] ? driver_probe_device+0x440/0x440 [ 57.178510] [<ffffffff81577736>] bus_for_each_dev+0x66/0xa0 [ 57.184841] [<ffffffff815793de>] driver_attach+0x1e/0x20 [ 57.190881] [<ffffffff81578d6e>] bus_add_driver+0x1ee/0x280 [ 57.197212] [<ffffffff8157abc0>] driver_register+0x60/0xe0 [ 57.203447] [<ffffffff8149bc50>] __pci_register_driver+0x60/0x70 [ 57.210285] [<ffffffffa0119450>] drm_pci_init+0xe0/0x110 [drm] [ 57.216911] [<ffffffff810dcd8d>] ? trace_hardirqs_on+0xd/0x10 [ 57.223434] [<ffffffffa023a000>] ? 0xffffffffa023a000 [ 57.229237] [<ffffffffa023a092>] i915_init+0x92/0x99 [i915] [ 57.235570] [<ffffffff810003db>] do_one_initcall+0xab/0x1d0 [ 57.241900] [<ffffffff810f9eef>] ? rcu_read_lock_sched_held+0x7f/0x90 [ 57.249205] [<ffffffff81204f18>] ? kmem_cache_alloc_trace+0x248/0x2b0 [ 57.256509] [<ffffffff811a5eee>] ? do_init_module+0x27/0x1d9 [ 57.262934] [<ffffffff811a5f26>] do_init_module+0x5f/0x1d9 [ 57.269167] [<ffffffff8112392f>] load_module+0x20ef/0x27b0 [ 57.275401] [<ffffffff8111f8e0>] ? store_uevent+0x40/0x40 [ 57.281541] [<ffffffff81124243>] SYSC_finit_module+0xc3/0xf0 [ 57.287969] [<ffffffff8112428e>] SyS_finit_module+0xe/0x10 [ 57.294203] [<ffffffff81960069>] entry_SYSCALL_64_fastpath+0x1c/0xac [ 57.301406] Code: ff 5d c3 66 0f 1f 44 00 00 0f 1f 44 00 00 8b 87 d8 00 00 00 55 48 89 e5 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 5d c3 [ 57.322964] RIP [<ffffffffa01235b2>] drm_mode_hsync+0x22/0x40 [drm] [ 57.330103] RSP <ffff88007aea3788> [ 57.334276] ---[ end trace d414224cb2e2a4cf ]--- [ 57.339861] modprobe (1097) used greatest stack depth: 12048 bytes left Fixes: 6f0e7535e7e1 ("drm/i915/BXT: Get pipe conf from the port registers") Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-1-git-send-email-ramalingam.c@intel.com (cherry picked from commit cefc4e18785123326c5d4d985085e32160fef7f5) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-23drm/i915: Protect gen7 irq_seqno_barrier with uncore lockChris Wilson
Faced with sporadic machine hangs on gen7, that mimic the issue of concurrent writes to the same cacheline and seem to start with commit 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+), let us restore the spinlock around the mmio read. Fixes: 9b9ed3093613 (drm/i915: Remove forcewake dance from seqno/irq...) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1461744121-27051-1-git-send-email-chris@chris-wilson.co.uk Tested-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit bcbdb6d01150dcc1769ddc9baaaf7f102f27f919) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit (git 2.34.1) at 2025-09-28 09:10:37 +0000