summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-27USB: bcma: drop Northstar PHY 2.0 initialization codeRafał Miłecki
This driver should initialize controller only, PHY initialization should be handled by separated PHY driver. We already have phy-bcm-ns-usb2 in place so let it makes its duty. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27usb: core: hcd: add missing header dependenciesBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/usb/core/hcd.c:2390:5: warning: no previous prototype for 'usb_bus_start_enum' [-Wmissing-prototypes] In fact, these functions are declared in linux/usb/otg.h, so this patch adds the missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27fs: rename "rename2" i_op to "rename"Miklos Szeredi
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27fs: make remaining filesystems use .rename2Miklos Szeredi
This is trivial to do: - add flags argument to foo_rename() - check if flags is zero - assign foo_rename() to .rename2 instead of .rename This doesn't mean it's impossible to support RENAME_NOREPLACE for these filesystems, but it is not trivial, like for local filesystems. RENAME_NOREPLACE must guarantee atomicity (i.e. it shouldn't be possible for a file to be created on one host while it is overwritten by rename on another host). Filesystems converted: 9p, afs, ceph, coda, ecryptfs, kernfs, lustre, ncpfs, nfs, ocfs2, orangefs. After this, we can get rid of the duplicate interfaces for rename. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Howells <dhowells@redhat.com> [AFS] Acked-by: Mike Marshall <hubcap@omnibond.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jan Harkes <jaharkes@cs.cmu.edu> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Mark Fasheh <mfasheh@suse.com>
2016-09-27Revert "tpm/tpm_crb: implement tpm crb idle state"Jarkko Sakkinen
This reverts commit e17acbbb69d30836a8c12e2c09bbefab8656693e. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-09-27Revert "tmp/tpm_crb: fix Intel PTT hw bug during idle state"Jarkko Sakkinen
This reverts commit 9514ff1961c6f0f5983ba72d94f384bc13e0d4a1. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-09-27Revert "tpm/tpm_crb: open code the crb_init into acpi_add"Jarkko Sakkinen
This reverts commit 0c22db435bf79d3cf3089df7ff198d4867df3c27. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-09-27Revert "tmp/tpm_crb: implement runtime pm for tpm_crb"Jarkko Sakkinen
This reverts commit e350e24694e447e6ab7312fffae5ca31a0bb5165. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-09-27video: smscufx: remove unused variableSudip Mukherjee
The variable was only assigned with the pointer but was never used. We can safely remove it. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27matroxfb: fix size of memcpySudip Mukherjee
hw->DACreg has a size of 80 bytes and MGADACbpp32 has 21. So when memcpy copies MGADACbpp32 to hw->DACreg it copies 80 bytes but only 21 bytes are valid. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27fbdev: ssd1307fb: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. For fixing this problem, we use of_device_get_match_data(), this will simplify the code a little by using a standard function for getting the match data. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27fbdev: ssd1307fb: constify the device_info pointerLABBE Corentin
of_match_device return const data, so instead of casting its return value this patch constify the device_info pointer. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27simplefb: Disable and release clocks and regulators in destroy callbackChen-Yu Tsai
simplefb gets unregister when a proper framebuffer driver comes in and kicks it out. However the claimed clocks and regulators stay enabled as they are only released in the platform device remove function, which in theory would never get called. Move the clock/regulator cleanup into the framebuffer destroy callback, which gets called as part of the framebuffer unregister process. Note this introduces asymmetry in how the resources are claimed and released. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27video: fbdev: constify fb_fix_screeninfo and fb_var_screeninfo structuresJulia Lawall
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change in the fb_fix_screeninfo case is as follows (http://coccinelle.lip6.fr/). The fb_var_screeninfo case is analogous. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct fb_fix_screeninfo i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p @bad@ position p != {r.p,ok.p}; identifier r.i; struct fb_fix_screeninfo e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct fb_fix_screeninfo i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27matroxfb: constify local structuresJulia Lawall
For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27video: fbdev: i810: add in missing white space in error message textColin Ian King
A printk message spans two lines and the literal string is missing a white space between words. Add the white space. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27video: fbdev: add missing \n at end of printk error messageColin Ian King
The message is missing a \n, add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27video: fbdev: exynos: Remove old non-working MIPI driverKrzysztof Kozlowski
The old non-DRM Exynos MIPI driver does not support DeviceTree and requires board files. Our platforms do not provide such so the driver is not usable since a long time ago. All features provided by the driver (and associated s6e8ax0 panel driver) are already supported by newer DRM version so the old code can be removed. Cc: Inki Dae <inki.dae@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27omapfb: fix return value check in dsi_bind()Wei Yongjun
Fix the retrn value check which testing the wrong variable in dsi_bind(). Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27video: fbdev: offb: Call pci_enable_device() before using the PCI VGA deviceYongji Xie
Currently the offb module will use the PCI VGA device as frame buffer device without calling something like pci_enable_device(). However, this would cause some problem if we disable memory decoding of the upstream bridge before. When the console driver issued memory access to the VGA device, the access cannot be supported by the bridge which will cause EEH error on Power machine. Signed-off-by: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27thermal: int3403: Process trip change notificationSrinivas Pandruvada
When ACPI sends notification for trip point change re-read trips and notify thermal core, so that this can be passed to user space thermal controller. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: int340x: New Interface to read trip and notifySrinivas Pandruvada
Separated the code for reading trip points from int340x_thermal_zone_add to a standalone function int340x_thermal_read_trips. This standlone interface to read is exported so that int340x drivers can re-read trips on ACPI notification for trip point change. Also the appropriate notification events are sent by int340x driver based on the acpi event using int340x_thermal_zone_device_update(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: user_space gov: Add additional information in ueventSrinivas Pandruvada
Add additional properties: NAME= Thermal zone type TEMP= Temperature sample value TRIP= Violated trip index EVENT= The notification event (new temperature sample, trip violation trip changed) This is the additional information to what kobject_uevent already provides. So it will not impact existing user spaces. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27Merge branches 'thermal-soc', 'thermal-core', 'thermal-intel' and ↵Zhang Rui
'thermal-tegra-hw-throttle' into next
2016-09-27thermal: tegra: add hw-throttle for Tegra132Wei Ni
Tegra132 use CCROC throttle registers to configure pulse skiper, set these registers to enable throttle function for Tegra132. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: tegra: add hw-throttle functionWei Ni
Tegra soctherm support HW throttle, when the soctherm snesors' temperature is above the throttle trip point, it will trigger pulse skiper to tune clocks accroding to the throttle depth. Add this function for Tegra124 and Tegra210. Since Tegra132 use different registers to configure pulse skiper, will support it in next patch. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_registerAxel Lin
devm_thermal_zone_of_sensor_register can fail, so check it's return value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Add Mediatek thermal driver for mt2701.dawei.chien@mediatek.com
This patch adds support for mt2701 chip to mtk_thermal, and integrate both mt8173 and mt2701 on the same driver. MT8173 has four banks and five sensors, and MT2701 has only one bank and three sensors. Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: max77620: Add thermal driver for reporting junction tempLaxman Dewangan
Maxim Semiconductor Max77620 supports alarm interrupts when its die temperature crosses 120C and 140C. These threshold temperatures are not configurable. Add thermal driver to register PMIC die temperature as thermal zone sensor and capture the die temperature warning interrupts to notifying the client. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: tango: add resume supportMarc Gonzalez
When this platform is suspended, firmware powers the entire SoC down, except a few hardware blocks waiting for wakeup events. There is no context to save for this particular block. Therefore, there is nothing useful for the driver to do on suspend; so we define a NULL suspend hook. On resume, the driver initializes the block exactly as is done in the probe callback. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27devfreq_cooling: no need to check state with negative numberShawn Lin
We could see that state is defined as unsigned type, so it should never be less than zero. Let' remove this check. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rcar_thermal: don't call thermal_zone_device_unregister when ↵Bui Duc Phuc
USE_OF_THERMAL devm_thermal_zone_of_sensor_register() case doesn't need to call thermal_zone_device_unregister(). Otherwise, rcar-thermal can't register thermal zone again after rebind. This patch fixes it. Signed-off-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27Thermal: of thermal: typo fixZhang Rui
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: imx: depend on imx SoC archPeter Robinson
Not much use unless the SoC is selected so depend on the ARCH_MXC and COMPILE_TEST like all the other thermal drivers. v2: drop extraneous OF Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens: Fix return value check in init_common()Wei Yongjun
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. And the function devm_regmap_init_mmio() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: optimize sensor auto accessing periodRocky Hao
In less than 10 ms, the temperature of soc will arise 10 degree. 250 ms is too big for soc tempeture control. Setting 2.5 ms will speed up temperature accessing speed but introduce no more cpu's computing overhead. We set AUTO_PERIOD_TIME and TSADCV3_AUTO_PERIOD_HT_TIME the same value, because normal temperature update speed is also our consern in IPA. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: enhance the tsadc's bandgap feature for rk3399Rocky Hao
Due to the voltage ripple, the sensing data of the tsadc is not accurate. And in this patch, the bandgap feature is enhanced to remove the voltage ripple, and then the tsadc can sense the temperature more precisely. Obsolete codes are removed as well. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8916: mark PM functions __maybe_unusedArnd Bergmann
The newly added tsens-8916 driver produces warnings when CONFIG_PM is disabled: drivers/thermal/qcom/tsens.c:53:12: error: 'tsens_resume' defined but not used [-Werror=unused-function] static int tsens_resume(struct device *dev) ^~~~~~~~~~~~ drivers/thermal/qcom/tsens.c:43:12: error: 'tsens_suspend' defined but not used [-Werror=unused-function] static int tsens_suspend(struct device *dev) ^~~~~~~~~~~~~ This marks both functions __maybe_unused to let the compiler know that they might be used in other configurations, without adding ugly #ifdef logic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qoriq: Add thermal management supportJia Hongtao
This driver add thermal management support by enabling TMU (Thermal Monitoring Unit) on QorIQ platform. It's based on thermal of framework: - Trip points defined in device tree. - Cpufreq as cooling device registered in qoriq cpufreq driver. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rcar-thermal: enable hwmon when thermal_zone_of_sensor_register is usedKuninori Morimoto
rcar-thermal is supporting both thermal_zone_of_sensor_register() and thermal_zone_device_register(). But thermal_zone_of_sensor_register() doesn't enable hwmon as default. This patch enables it to keep compatibility Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of-thermal: Fix setting of set_emul_temp hookKeerthy
Currently thermal zone set_emul_temp is set unconditionally with of_thermal_set_emul_temp function. Set this only if the set_emul_temp hook is provided for thermal_zone_of_device_ops. This fixes emul_temp failures on platforms for which set_emul_temp hook is not populated. Fixes: "184a4bf623f (thermal: of: Extend current of-thermal.c code to allow setting emulated temp)" Suggested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Conflicts: drivers/thermal/of-thermal.c Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: fixes the exception interruptsCaesar Wang
The hardware-tracked trips will set the alarm interrupt value for registers. Then when the thermal zone has no trips to be set, That make the thermal trips callback a over range value. The root cause is the rk_tsadcv2_temp_to_code() function to handle the invalid temperature range is indeed incorrect, let's fix it on now. Otherwise, the thermal alarm interrupt will be triggered all the time on some SoCs. Fox example: localhost tmp # grep thermal /proc/interrupts; sleep 5; grep thermal /proc/interrupts 23: 994830 .. GICv3 129 Level rockchip_thermal 23: 1003423 .. GICv3 129 Level rockchip_thermal Reported-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: fixes the period time for tsadcCaesar Wang
We should increase the period cycles to save power since the rk3399 has the high frequency for tsadc clock. Fixes commit b0d70338bca22cb14 ("thermal: rockchip: Support the RK3399 SoCs in thermal driver") Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: add the set_trips functionCaesar Wang
Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A sensor driver callback `set_trips' is then called with the temperatures. Lastly, The sensor will trigger the hardware high temperature interrupts to increase the sampleing rate and throttle frequency to limit the temperature rising When performing passive cooling. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: bang-bang governor: act on lower trip boundarySascha Hauer
With interrupt driven thermal zones we pass the lower and upper temperature on which shall be acted, so in the governor we have to act on the exact lower temperature to be consistent. Otherwise an interrupt maybe generated on the exact lower temperature, but the bang bang governor does not react since The polling driven zones have to be one step cooler before the governor reacts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Acked-by: Peter Feuerer <peter@piie.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of: implement .set_trips for device tree thermal zonesSascha Hauer
This patch implements .set_trips for device tree thermal zones. As the hardware-tracked trip points is supported by thermal core patch[0]. patch[0] "thermal: Add support for hardware-tracked trip points". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Add support for hardware-tracked trip pointsSascha Hauer
This adds support for hardware-tracked trip points to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A .set_trips callback is then called with the temperatures. If there is no trip point above or below the current temperature, the passed trip temperature will be -INT_MAX or INT_MAX respectively. In this callback, the driver should program the hardware such that it is notified when either of these trip points are triggered. When a trip point is triggered, the driver should call `thermal_zone_device_update' for the respective thermal zone. This will cause the trip points to be updated again. If .set_trips is not implemented, the framework behaves as before. This patch is based on an earlier version from Mikko Perttunen <mikko.perttunen@kapsi.fi> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: remove declare local symbols as staticEduardo Valentin
Trivial: remove the following: drivers/thermal/qcom/tsens-8916.c:103:24: warning: symbol 'ops_8916' was not declared. Should it be static? drivers/thermal/qcom/tsens-8996.c:76:24: warning: symbol 'ops_8996' was not declared. Should it be static? drivers/thermal/qcom/tsens-8974.c:235:24: warning: symbol 'ops_8974' was not declared. Should it be static? drivers/thermal/qcom/tsens-8960.c:279:24: warning: symbol 'ops_8960' was not declared. Should it be static? Cc: Zhang Rui <rui.zhang@intel.com> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
generated by cgit (git 2.34.1) at 2025-09-24 02:55:13 +0000