| Age | Commit message (Collapse) | Author |
|---|
|
Merge devfreq changes and power management tools changes for 6.6-rc1:
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
* pm-devfreq:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes
* pm-tools:
cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
cpupower: Add turbo-boost support in cpupower
cpupower: Add support for amd_pstate mode change
cpupower: Add EPP value change support
cpupower: Add is_valid_path API
cpupower: Recognise amd-pstate active mode driver
cpupower: Bump soname version
|
|
Merge system-wide power management changes and power capping updates
for 6.6-rc1:
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
* pm-sleep:
PM: sleep: Add helpers to allow a device to remain powered-on
PM: hibernate: don't store zero pages in the image file
* pm-qos:
PM: QoS: Add check to make sure CPU latency is non-negative
* powercap:
powercap: intel_rapl: Optimize rp->domains memory allocation
powercap: arm_scmi: Remove recursion while parsing zones
|
|
Merge CPU power management updates for 6.6-rc1:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
* pm-cpuidle:
cpuidle: teo: Avoid unnecessary variable assignments
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Gather statistics regarding whether or not to stop the tick
cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Do not call tick_nohz_get_sleep_length() upfront
cpuidle: teo: Drop utilized from struct teo_cpu
cpuidle: teo: Avoid stopping the tick unnecessarily when bailing out
cpuidle: teo: Update idle duration estimate when choosing shallower state
* pm-cpufreq:
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
|
|
Merge a PNP change for 6.6-rc1:
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
* pnp:
PNP: ACPI: Fix string truncation warning
|
|
Merge ACPI power management updates for 6.6-rc1:
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
* acpi-pm:
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
|
|
Merge ACPI device enumeration changes, ACPI TAD and extlog drivers
updates, and miscellaneous ACPI-related changes for 6.6-rc1:
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
* acpi-scan:
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-tad:
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
* acpi-extlog:
ACPI: extlog: Fix finding the generic error data for v3 structure
* acpi-misc:
ACPI: Remove assorted unused declarations of functions
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: Move AMBA bus scan handling into arm64 specific directory
|
|
Merge ACPI thermal driver changes for 6.6-rc1:
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
|
|
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
|
|
Add support for sa8775p SoC that uses controller version 5.90
reusing the 1.9.0 config.
Link: https://lore.kernel.org/linux-pci/1689960276-29266-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Merge changes related to the ACPI bus type and ACPI backlight driver
changes for 6.6-rc1:
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
* acpi-bus:
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
ACPI: video: Install Notify() handler directly
ACPI: AC: Install Notify() handler directly
ACPI: bus: Set driver_data to NULL every time .add() fails
ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
|
|
Merge ACPICA material for 6.6-rc1.
This includes some fixes, cleanups and new material, mostly related to
parsing tables.
Specifics:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
- Remove a duplicate macro from zephyr header (Najumon B.A).
- Add data structures for GED and _EVT tracking (Jose Marinho).
- Fix misspelled CDAT DSMAS define (Dave Jiang).
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
- Add a struct size macro related to SRAT (Dave Jiang).
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
- Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
- Add RHCT flags, CMO and MMU nodes (Sunil V L).
- Change ACPICA version to 20230628 (Bob Moore).
* acpica:
ACPICA: Update version to 20230628
ACPICA: RHCT: Add flags, CMO and MMU nodes
ACPICA: MADT: Add RISC-V external interrupt controllers
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA: Add a define for size of struct acpi_srat_generic_affinity device_handle
ACPICA: Slightly simplify an error message in acpi_ds_result_push()
ACPICA: Fix misspelled CDAT DSMAS define
ACPICA: Add interrupt command to acpiexec
ACPICA: Detect GED device and keep track of _EVT
ACPICA: fix for conflict macro definition on zephyr interface
ACPICA: Add support for _DSC as per ACPI 6.5
ACPICA: exserial.c: replace ternary operator with ACPI_MIN()
ACPICA: Modify ACPI_STATE_COMMON
ACPICA: Fix GCC 12 dangling-pointer warning
|
|
Qcom PCIe EP controllers have 4K alignment restriction for the outbound
window address. Hence, pass this info to the EPF core so that the EPF
drivers can make use of this info.
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an irq mapping leak in gpio-sim
- associate the GPIO device's software node with the irq domain in
gpio-sim
* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: pass the GPIO device's software node to irq domain
gpio: sim: dispose of irq mappings before destroying the irq_sim domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are some Renesas and AMD driver fixes, the AMD fix affects
important laptops in the wild so this one is pretty important. It
seems a bit tough to get this right.
- Fix DT parsing and related locking in the Renesas driver.
- Fix wakeup IRQs in the AMD driver once again. Really tricky this
one"
* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Mask wake bits on probe again
pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()
|
|
Pull drm fixes from Dave Airlie:
"A bit bigger than I'd care for, but it's mostly a single vmwgfx fix
and a fix for an i915 hotplug probing. Otherwise misc i915, bridge,
panfrost and dma-buf fixes.
core:
- add a HPD poll helper
i915:
- fix regression in i915 polling
- fix docs build warning
- fix DG2 idle power consumption
bridge:
- samsung-dsim: init fix
panfrost:
- fix speed binning issue
dma-buf:
- fix recursive lock in fence signal
vmwgfx:
- fix shader stage validation
- fix NULL ptr derefs in gem put"
* tag 'drm-fixes-2023-08-25' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/vmwgfx: Fix possible invalid drm gem put calls
drm/vmwgfx: Fix shader stage validation
dma-buf/sw_sync: Avoid recursive lock during fence signal
drm/i915: fix Sphinx indentation warning
drm/i915/dgfx: Enable d3cold at s2idle
drm/display/dp: Fix the DP DSC Receiver cap size
drm/panfrost: Skip speed binning on EOPNOTSUPP
drm: bridge: samsung-dsim: Fix init during host transfer
|
|
Simpilfy probe() by replacing device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824204456.401580-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The supported channels for this driver are {0..3}. Fix the incorrect
channel in tmp51x_is_visible().
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ea0eccc0-a29f-41e4-9049-a1a13f8b16f1@roeck-us.net/
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824204456.401580-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some new big modular systems can be equipped with up to 24 fans.
Extend maximum number of fans accordingly.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230824164006.26868-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Compared with the previous Amlogic-GXBB, the watchdog of Amlogic-T7
has a different reset enable bit.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230802033222.4024946-4-huqiang.qin@amlogic.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add a new structure wdt_params to describe the watchdog difference
of different chips.
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230802033222.4024946-3-huqiang.qin@amlogic.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
After issuing a "poweroff" command the board goes through the
expected power-off sequence and turns it off completely:
systemd-shutdown[1]: Powering off.
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Power down
The "Expect reboot!" message is misleading because in the
power-off case, no reboot is expected to happen at all.
Avoid the confusion by removing the "Expect reboot!" message.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230822135255.1013981-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
With COMPILE_TEST recently enabled, 0-day reports a warning:
drivers/watchdog/stm32_iwdg.c:215:34: warning: 'stm32_iwdg_of_match' defined but not used [-Wunused-const-variable=]
As STM32 platforms are always used with DT, drop the of_match_ptr().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308211837.4VBSUAtZ-lkp@intel.com/
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230823151059.2356881-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.6-1
* New library driver for Intel MID to deduplicate code (Raag Jadav)
* Reuse common functions from pinctrl-intel to reduce the code (Raag Jadav)
* Move most of the exported functions to the PINCTRL_INTEL namespace
* Make use of pm_ptr() in Bay Trail and Lynxpoint drivers
* Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper and use it in a few drivers
* Consolidata ACPI dependency in Kconfig (Raag Jadav)
* Fix address_space_handler() argument in Cherryview driver (Raag Jadav)
* Optinmize byt_pin_config_set() to avoid IO in error cases (Raag Jadav)
The following is an automated git shortlog grouped by driver:
at91:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
baytrail:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
- consolidate common mask operation
cherryview:
- fix address_space_handler() argument
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
- reuse common functions from pinctrl-intel
intel:
- consolidate ACPI dependency
- Switch to use exported namespace
- export common pinctrl functions
lynxpoint:
- Make use of pm_ptr()
- reuse common functions from pinctrl-intel
Merge patch series:
- Merge patch series "Introduce Intel Tangier pinctrl driver"
- Merge patch series "Reuse common functions from pinctrl-intel"
merrifield:
- Adapt to Intel Tangier driver
moorefield:
- Adapt to Intel Tangier driver
mvebu:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm:
- Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
renesas:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
tangier:
- Introduce Intel Tangier driver
tegra:
- Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Remove support for gpio_disable_free() because it is called when the libgpiod
command "gpioset" is invoked. This gives the GPIO control back to hardware which
cancels out the effort to set the GPIO value.
Reminder of the code flow to change a GPIO value from software:
1) All GPIOs are controlled by hardware by default
2) To change the GPIO value, enable software control via a mux.
3) Once software has control over the GPIO pin, the gpio-mlxbf3 driver
will be able to change the direction and value of the GPIO.
When the user runs "gpioset gpiochip0 0=0" for example, the gpio
pin value should change from 1 to 0. In this case, mlxbf3_gpio_request_enable()
is called via gpiochip_generic_request(). The latter switches GPIO control from
hardware to software. Then the GPIO value is changed from 1 to 0. However,
gpio_disable_free() is also called which changes control back to hardware
which changes the GPIO value back to 1.
Fixes: d11f932808dc ("pinctrl: mlxbf3: Add pinctrl driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230818164314.8505-2-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability. Handle error
print with a label instead of trying to chain everything into a single
if condition.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-14-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Return early for errors in pcie_capability_clear_and_set_word_unlocked()
and pcie_capability_clear_and_set_dword() to simplify the control flow.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-13-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Update config space save/restore debug messages so they line up better.
Previously:
nvme 0000:05:00.0: saving config space at offset 0x4 (reading 0x20100006)
nvme 0000:05:00.0: saving config space at offset 0x8 (reading 0x1080200)
nvme 0000:05:00.0: saving config space at offset 0xc (reading 0x0)
nvme 0000:05:00.0: restoring config space at offset 0x4 (was 0x0, writing 0x20100006)
Now:
nvme 0000:05:00.0: save config 0x04: 0x20100006
nvme 0000:05:00.0: save config 0x08: 0x01080200
nvme 0000:05:00.0: save config 0x0c: 0x00000000
nvme 0000:05:00.0: restore config 0x04: 0x00000000 -> 0x20100006
No functional change intended. Enable these messages by setting
CONFIG_DYNAMIC_DEBUG=y and adding 'dyndbg="file drivers/pci/* +p"'
to kernel parameters.
Link: https://lore.kernel.org/r/20230823191831.476579-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
|
|
Remove unnecessary "return;" in void functions and format consistently.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-12-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix typos in docs and comments.
Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix typos in the pci_bus_resetable() and pci_slot_resetable() function
names. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Simplify pci_dev_driver() by removing the "else". The "if" case always
returns, so the "else" is superfluous. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Simplify pci_pio_to_address() by removing an unnecessary local variable.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ACPI Platform Error Interfaces (APEI) convey error information to the OS.
If the APEI GHES driver receives information about PCI errors, it queues it
in aer_recover_ring for processing by the PCI AER code.
AER_RECOVER_RING_SIZE is the size of the aer_recover_ring FIFO and is
arbitrary, with no direct connection to hardware.
AER_RECOVER_RING_ORDER was only used to compute AER_RECOVER_RING_SIZE.
Remove it and define AER_RECOVER_RING_SIZE directly. No functional change
intended.
Link: https://lore.kernel.org/r/20230824193712.542167-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We used u8, u16, and u32 for get_user() pointer types, but "unsigned char",
"unsigned short", and "unsigned int" for put_user().
Use u8, u16, and u32 for put_user() for consistency. No functional change
intended.
Link: https://lore.kernel.org/r/20230824193712.542167-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Previously we used "%#08x" to print a 32-bit value. This fills an
8-character field with "0x...", but of course many 32-bit values require a
10-character field "0x12345678" for this format. Fix the formats to avoid
confusion.
Link: https://lore.kernel.org/r/20230824193712.542167-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We always assign "fields" immediately, so remove the unnecessary
initializations. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
pcie_port_bus_type is used only in pci-driver.c and pcie/portdrv_core.c and
pcie/portdrv_pci.c. None of these can be built as modules, so
pcie_port_bus_type doesn't need to be exported. Unexport it.
Link: https://lore.kernel.org/r/20230824193712.542167-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The busn member of struct mvebu_pcie is unused, so drop it.
Link: https://lore.kernel.org/r/20220905192310.22786-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
Replace ep93xx_chip_revision() with soc_device_match(), so
ep93xx_chip_revision() can be safetly dropped from exported functions.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Return -ENOMEM from ep93xx_pata_probe() if devm_kzalloc() or
ata_host_alloc() fails.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The polarity of the card detection gpio is handled by the "cd-inverted"
property in the device tree. Move this inversion logic to gpiolib to avoid
reading the gpio raw value.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-4-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move the contents of linux/atmel-mci.h into
drivers/mmc/host/atmel-mci.c as it is only used in one file
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20230825095157.76073-3-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Replace the legacy GPIO APIs with gpio descriptor consumer interface.
To maintain backward compatibility, we rely on the "cd-inverted"
property to manage the invertion flag instead of GPIO property.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-2-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
* for-next/perf:
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
perf: pmuv3: Remove comments from armv8pmu_[enable|disable]_event()
perf/arm-cmn: Add CMN-700 r3 support
perf/arm-cmn: Refactor HN-F event selector macros
perf/arm-cmn: Remove spurious event aliases
drivers/perf: Explicitly include correct DT includes
perf: pmuv3: Add Cortex A520, A715, A720, X3 and X4 PMUs
dt-bindings: arm: pmu: Add Cortex A520, A715, A720, X3, and X4
perf/smmuv3: Remove build dependency on ACPI
perf: xgene_pmu: Convert to devm_platform_ioremap_resource()
driver/perf: Add identifier sysfs file for Yitian 710 DDR
|
|
The TCA9538 is an 8 bit version of the already supported TCA9539.
This chip also has interrupt support.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Replace device_get_match_data() and id lookup for retrieving match data
by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
These declarations are not implemented now, remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When extending the capability detection logic for 4xxx devices the
SMx algorithms were accidentally missed.
Enable these SMx capabilities by default for QAT GEN4 devices.
Check for device variants where the SMx algorithms are explicitly
disabled by the GEN4 hardware. This is indicated in fusectl1
register.
Mask out SM3 and SM4 based on a bit specific to those algorithms.
Mask out SM2 if the PKE slice is not present.
Fixes: 4b44d28c715d ("crypto: qat - extend crypto capability detection for 4xxx")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
