summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-10-02net/mlx5e: Fix return status when setting unsupported FEC modeAya Levin
Verify the configured FEC mode is supported by at least a single link mode before applying the command. Otherwise fail the command and return "Operation not supported". Prior to this patch, the command was successful, yet it falsely set all link modes to FEC auto mode - like configuring FEC mode to auto. Auto mode is the default configuration if a link mode doesn't support the configured FEC mode. Fixes: b5ede32d3329 ("net/mlx5e: Add support for FEC modes based on 50G per lane links") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5e: Fix driver's declaration to support GRE offloadAya Levin
Declare GRE offload support with respect to the inner protocol. Add a list of supported inner protocols on which the driver can offload checksum and GSO. For other protocols, inform the stack to do the needed operations. There is no noticeable impact on GRE performance. Fixes: 2729984149e6 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5e: CT, Fix coverity issueMaor Dickman
The cited commit introduced the following coverity issue at function mlx5_tc_ct_rule_to_tuple_nat: - Memory - corruptions (OVERRUN) Overrunning array "tuple->ip.src_v6.in6_u.u6_addr32" of 4 4-byte elements at element index 7 (byte offset 31) using index "ip6_offset" (which evaluates to 7). In case of IPv6 destination address rewrite, ip6_offset values are between 4 to 7, which will cause memory overrun of array "tuple->ip.src_v6.in6_u.u6_addr32" to array "tuple->ip.dst_v6.in6_u.u6_addr32". Fixed by writing the value directly to array "tuple->ip.dst_v6.in6_u.u6_addr32" in case ip6_offset values are between 4 to 7. Fixes: bc562be9674b ("net/mlx5e: CT: Save ct entries tuples in hashtables") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTUAya Levin
Prior to this fix, in Striding RQ mode the driver was vulnerable when receiving packets in the range (stride size - headroom, stride size]. Where stride size is calculated by mtu+headroom+tailroom aligned to the closest power of 2. Usually, this filtering is performed by the HW, except for a few cases: - Between 2 VFs over the same PF with different MTUs - On bluefield, when the host physical function sets a larger MTU than the ARM has configured on its representor and uplink representor. When the HW filtering is not present, packets that are larger than MTU might be harmful for the RQ's integrity, in the following impacts: 1) Overflow from one WQE to the next, causing a memory corruption that in most cases is unharmful: as the write happens to the headroom of next packet, which will be overwritten by build_skb(). In very rare cases, high stress/load, this is harmful. When the next WQE is not yet reposted and points to existing SKB head. 2) Each oversize packet overflows to the headroom of the next WQE. On the last WQE of the WQ, where addresses wrap-around, the address of the remainder headroom does not belong to the next WQE, but it is out of the memory region range. This results in a HW CQE error that moves the RQ into an error state. Solution: Add a page buffer at the end of each WQE to absorb the leak. Actually the maximal overflow size is headroom but since all memory units must be of the same size, we use page size to comply with UMR WQEs. The increase in memory consumption is of a single page per RQ. Initialize the mkey with all MTTs pointing to a default page. When the channels are activated, UMR WQEs will redirect the RX WQEs to the actual memory from the RQ's pool, while the overflow MTTs remain mapped to the default page. Fixes: 73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5e: Fix error path for RQ allocAya Levin
Increase granularity of the error path to avoid unneeded free/release. Fix the cleanup to be symmetric to the order of creation. Fixes: 0ddf543226ac ("xdp/mlx5: setup xdp_rxq_info") Fixes: 422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: Fix request_irqs error flowMaor Gottlieb
Fix error flow handling in request_irqs which try to free irq that we failed to request. It fixes the below trace. WARNING: CPU: 1 PID: 7587 at kernel/irq/manage.c:1684 free_irq+0x4d/0x60 CPU: 1 PID: 7587 Comm: bash Tainted: G W OE 4.15.15-1.el7MELLANOXsmp-x86_64 #1 Hardware name: Advantech SKY-6200/SKY-6200, BIOS F2.00 08/06/2020 RIP: 0010:free_irq+0x4d/0x60 RSP: 0018:ffffc9000ef47af0 EFLAGS: 00010282 RAX: ffff88001476ae00 RBX: 0000000000000655 RCX: 0000000000000000 RDX: ffff88001476ae00 RSI: ffffc9000ef47ab8 RDI: ffff8800398bb478 RBP: ffff88001476a838 R08: ffff88001476ae00 R09: 000000000000156d R10: 0000000000000000 R11: 0000000000000004 R12: ffff88001476a838 R13: 0000000000000006 R14: ffff88001476a888 R15: 00000000ffffffe4 FS: 00007efeadd32740(0000) GS:ffff88047fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc9cc010008 CR3: 00000001a2380004 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: mlx5_irq_table_create+0x38d/0x400 [mlx5_core] ? atomic_notifier_chain_register+0x50/0x60 mlx5_load_one+0x7ee/0x1130 [mlx5_core] init_one+0x4c9/0x650 [mlx5_core] pci_device_probe+0xb8/0x120 driver_probe_device+0x2a1/0x470 ? driver_allows_async_probing+0x30/0x30 bus_for_each_drv+0x54/0x80 __device_attach+0xa3/0x100 pci_bus_add_device+0x4a/0x90 pci_iov_add_virtfn+0x2dc/0x2f0 pci_enable_sriov+0x32e/0x420 mlx5_core_sriov_configure+0x61/0x1b0 [mlx5_core] ? kstrtoll+0x22/0x70 num_vf_store+0x4b/0x70 [mlx5_core] kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x140 ? rcu_all_qs+0x5/0x80 ? _cond_resched+0x15/0x30 ? __sb_start_write+0x41/0x80 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x60/0x110 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 24163189da48 ("net/mlx5: Separate IRQ request/free from EQ life cycle") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessibleSaeed Mahameed
In case of pci is offline reclaim_pages_cmd() will still try to call the FW to release FW pages, cmd_exec() in this case will return a silent success without actually calling the FW. This is wrong and will cause page leaks, what we should do is to detect pci offline or command interface un-available before tying to access the FW and manually release the FW pages in the driver. In this patch we share the code to check for FW command interface availability and we call it in sensitive places e.g. reclaim_pages_cmd(). Alternative fix: 1. Remove MLX5_CMD_OP_MANAGE_PAGES form mlx5_internal_err_ret_value, command success simulation list. 2. Always Release FW pages even if cmd_exec fails in reclaim_pages_cmd(). Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: Add retry mechanism to the command entry index allocationEran Ben Elisha
It is possible that new command entry index allocation will temporarily fail. The new command holds the semaphore, so it means that a free entry should be ready soon. Add one second retry mechanism before returning an error. Patch "net/mlx5: Avoid possible free of command entry while timeout comp handler" increase the possibility to bump into this temporarily failure as it delays the entry index release for non-callback commands. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: poll cmd EQ in case of command timeoutEran Ben Elisha
Once driver detects a command interface command timeout, it warns the user and returns timeout error to the caller. In such case, the entry of the command is not evacuated (because only real event interrupt is allowed to clear command interface entry). If the HW event interrupt of this entry will never arrive, this entry will be left unused forever. Command interface entries are limited and eventually we can end up without the ability to post a new command. In addition, if driver will not consume the EQE of the lost interrupt and rearm the EQ, no new interrupts will arrive for other commands. Add a resiliency mechanism for manually polling the command EQ in case of a command timeout. In case resiliency mechanism will find non-handled EQE, it will consume it, and the command interface will be fully functional again. Once the resiliency flow finished, wait another 5 seconds for the command interface to complete for this command entry. Define mlx5_cmd_eq_recover() to manage the cmd EQ polling resiliency flow. Add an async EQ spinlock to avoid races between resiliency flows and real interrupts that might run simultaneously. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: Avoid possible free of command entry while timeout comp handlerEran Ben Elisha
Upon command completion timeout, driver simulates a forced command completion. In a rare case where real interrupt for that command arrives simultaneously, it might release the command entry while the forced handler might still access it. Fix that by adding an entry refcount, to track current amount of allowed handlers. Command entry to be released only when this refcount is decremented to zero. Command refcount is always initialized to one. For callback commands, command completion handler is the symmetric flow to decrement it. For non-callback commands, it is wait_func(). Before ringing the doorbell, increment the refcount for the real completion handler. Once the real completion handler is called, it will decrement it. For callback commands, once the delayed work is scheduled, increment the refcount. Upon callback command completion handler, we will try to cancel the timeout callback. In case of success, we need to decrement the callback refcount as it will never run. In addition, gather the entry index free and the entry free into a one flow for all command types release. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02net/mlx5: Fix a race when moving command interface to polling modeEran Ben Elisha
As part of driver unload, it destroys the commands EQ (via FW command). As the commands EQ is destroyed, FW will not generate EQEs for any command that driver sends afterwards. Driver should poll for later commands status. Driver commands mode metadata is updated before the commands EQ is actually destroyed. This can lead for double completion handle by the driver (polling and interrupt), if a command is executed and completed by FW after the mode was changed, but before the EQ was destroyed. Fix that by using the mlx5_cmd_allowed_opcode mechanism to guarantee that only DESTROY_EQ command can be executed during this time period. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-10-02PM: domains: Allow to abort power off when no ->power_off() callbackUlf Hansson
In genpd_power_off() we may decide to abort the power off of the PM domain, even beyond the point when the governor would accept it. The abort is done if it turns out that a child domain has been requested to be powered on, which means it's waiting for the lock of the parent to be released. However, the abort is currently only considered if the genpd in question has a ->power_off() callback assigned. This is unnecessary limiting, especially if the genpd would have a parent of its own. Let's remove the limitation and make the behaviour consistent. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02PM: domains: Rename power state enums for genpdUlf Hansson
To clarify the code a bit, let's rename GPD_STATE_ACTIVE into GENPD_STATE_ON and GPD_STATE_POWER_OFF to GENPD_STATE_OFF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02Merge tag 'riscv-for-linus-5.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "Two fixes for this week: - The addition of a symbol export for clint_time_val, which has been inlined into some timex functions and can be used by drivers. - A fix to avoid calling get_cycles() before the timers have been probed. These both only effect !MMU systems" * tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Check clint_time_val before use clocksource: clint: Export clint_time_val for modules
2020-10-02ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()Tian Tao
Fix the following W=1 kernel build warning(s): drivers/acpi/scan.c: In function ‘acpi_bus_get_wakeup_device_flags’: drivers/acpi/scan.c:902:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] by using pr_debug() to instead of the ACPI_DEBUG_PRINT() macro, which should only be used by ACPICA code, to print a debug message. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02Merge tag 'pm-5.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix one more issue related to the recent RCU-lockdep changes, a typo in documentation and add a missing return statement to intel_pstate. Specifics: - Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf Hansson) - Fix typo in the PM documentation (Yoann Congal) - Add return statement that is missing after recent changes in the intel_pstate driver (Zhang Rui)" * tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: imx6q: Fixup RCU usage for cpuidle Documentation: PM: Fix a reStructuredText syntax error cpufreq: intel_pstate: Fix missing return statement
2020-10-02ACPI: memhotplug: Remove 'state' from struct acpi_memory_deviceHanjun Guo
After commit 315bbae9c5cb ("ACPI / memhotplug: deal with eject request in hotplug queue"), the memory device state, which is defined in struct acpi_memory_device, is not actually useful, so remove it along with symbols related to it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02ACPI / extlog: Check for RDMSR failureBen Hutchings
extlog_init() uses rdmsrl() to read an MSR, which on older CPUs provokes a error message at boot: unchecked MSR access error: RDMSR from 0x179 at rIP: 0xcd047307 (native_read_msr+0x7/0x40) Use rdmsrl_safe() instead, and return -ENODEV if it fails. Reported-by: jim@photojim.ca References: https://bugs.debian.org/971058 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02Merge tag 'staging-5.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are two small IIO driver fixes for 5.9-rc8 that resolve some reported issues: - driver name fixed in one driver - device name typo fixed Both have been in linux-next for a while with no reported problems" * tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: qcom-spmi-adc5: fix driver name iio: adc: ad7124: Fix typo in device name
2020-10-02node: Add access1 class to represent CPU to memory characteristicsJonathan Cameron
New access1 class is nearly the same as access0, but always provides characteristics for CPUs to memory. The existing access0 class provides characteristics to nearest or direct connnect initiator which may be a Generic Initiator such as a GPU or network adapter. This new class allows thread placement on CPUs to be performed so as to give optimal access characteristics to memory, even if that memory is for example attached to a GPU or similar and only accessible to the CPU via an appropriate bus. Suggested-by: Dan Willaims <dan.j.williams@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3Jonathan Cameron
In ACPI 6.3, the Memory Proximity Domain Attributes Structure changed substantially. One of those changes was that the flag for "Memory Proximity Domain field is valid" was deprecated. This was because the field "Proximity Domain for the Memory" became a required field and hence having a validity flag makes no sense. So the correct logic is to always assume the field is there. Current code assumes it never is. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02ACPI: Let ACPI know we support Generic Initiator Affinity StructuresJonathan Cameron
Until we tell ACPI that we support generic initiators, it will have to operate in fall back domain mode and all _PXM entries should be on existing non GI domains. This patch sets the relevant OSC bit to make that happen. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02ACPI: Support Generic Initiator only domainsJonathan Cameron
Generic Initiators are a new ACPI concept that allows for the description of proximity domains that contain a device which performs memory access (such as a network card) but neither host CPU nor Memory. This patch has the parsing code and provides the infrastructure for an architecture to associate these new domains with their nearest memory processing node. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02Merge tag 'gpio-v5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some late GPIO fixes for the v5.9 series: - Fix compiler warnings on the OMAP when PM is disabled - Clear the interrupt when setting edge sensitivity on the Spreadtrum driver. - Fix up spurious interrupts on the TC35894. - Support threaded interrupts on the Siox controller. - Fix resource leaks on the mockup driver. - Fix line event handling in syscall compatible mode for the character device. - Fix an unitialized variable in the PCA953A driver. - Fix access to all GPIO IRQs on the Aspeed AST2600. - Fix line direction on the AMD FCH driver. - Use the bitmap API instead of compiler intrinsics for bit manipulation in the PCA953x driver" * tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x gpio: pca953x: Use bitmap API over implicit GCC extension gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION gpio: aspeed: fix ast2600 bank properties gpio/aspeed-sgpio: don't enable all interrupts by default gpio/aspeed-sgpio: enable access to all 80 input & output sgpios gpio: pca953x: Fix uninitialized pending variable gpiolib: Fix line event handling in syscall compatible mode gpio: mockup: fix resource leak in error path gpio: siox: explicitly support only threaded irqs gpio: tc35894: fix up tc35894 interrupt configuration gpio: sprd: Clear interrupt when setting the type as edge gpio: omap: Fix warnings if PM is disabled
2020-10-02Merge tag 'mmc-v5.9-rc4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - Fix deadlock when removing MEMSTICK host - Workaround broken CMDQ on Intel GLK based IRBIS models * tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models memstick: Skip allocating card when removing host
2020-10-02PCI: aardvark: Fix initialization with old Marvell's Arm Trusted FirmwarePali Rohár
Old ATF automatically power on pcie phy and does not provide SMC call for phy power on functionality which leads to aardvark initialization failure: [ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95 [ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95) [ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95 This patch fixes above failure by ignoring 'not supported' error in aardvark driver. In this case it is expected that phy is already power on. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org Fixes: 366697018c9a ("PCI: aardvark: Add PHY support") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
2020-10-02platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reportingHans de Goede
2 recent commits: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types") Enabled reporting of SW_TABLET_MODE on more devices since the vbtn ACPI interface is used by the firmware on some of those devices to report this. Testing has shown that unconditionally enabling SW_TABLET_MODE reporting on all devices with a chassis type of 8 ("Portable") or 10 ("Notebook") which support the VGBS method is a very bad idea. Many of these devices are normal laptops (non 2-in-1) models with a VGBS which always returns 0, which we translate to SW_TABLET_MODE=1. This in turn causes userspace (libinput) to suppress events from the builtin keyboard and touchpad, making the laptop essentially unusable. Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination with libinput, leads to a non-usable system. Where as OTOH many people will not even notice when SW_TABLET_MODE is not being reported, this commit changes intel_vbtn_has_switches() to use a DMI based allow-list. The new DMI based allow-list matches on the 31 ("Convertible") and 32 ("Detachable") chassis-types, as these clearly are 2-in-1s and so far if they support the intel-vbtn ACPI interface they all have properly working SW_TABLET_MODE reporting. Besides these 2 generic matches, it also contains model specific matches for 2-in-1 models which use a different chassis-type and which are known to have properly working SW_TABLET_MODE reporting. This has been tested on the following 2-in-1 devices: Dell Venue 11 Pro 7130 vPro HP Pavilion X2 10-p002nd HP Stream x360 Convertible PC 11 Medion E1239T Fixes: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") BugLink: https://forum.manjaro.org/t/keyboard-and-touchpad-only-work-on-kernel-5-6/22668 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175599 Cc: Barnabás Pőcze <pobrn@protonmail.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-10-02platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on ↵Andy Shevchenko
the HP Pavilion 11 x360" After discussion, see the Link tag, it appears that this is not good enough. So, revert it now and apply a better fix. This reverts commit d823346876a970522ff9e4d2b323c9b734dcc4de. Link: https://lore.kernel.org/platform-driver-x86/s5hft71klxl.wl-tiwai@suse.de/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-10-02clocksource/drivers/armada-370-xp: Use semicolons rather than commas to ↵Julia Lawall
separate statements Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1601233948-11629-17-git-send-email-Julia.Lawall@inria.fr
2020-10-02bus/fsl-mc: Add a new version for dprc_get_obj_region commandDiana Craciun
The region size reported by the firmware for mc and software portals was less than allocated by the hardware. This may be problematic when mmapping the region in user space because the region size is less than page size. However the size as reserved by the hardware is 64K. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-14-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Extend ICID size from 16bit to 32bitBharat Bhushan
In virtual machines the device-id range is defined between 0x10000-0x20000. The reason for using such a large range is to avoid overlapping with the PCI range. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-13-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export IRQ pool handling functions to be used by VFIODiana Craciun
The IRQ pool handling functions can be used by both DPRC driver and VFIO. Adapt and export those functions. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-12-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl_mc: Do not rely on caller to provide non NULL mc_ioDiana Craciun
Before destroying the mc_io, check first that it was allocated. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-11-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add a container setup functionDiana Craciun
Both DPRC driver and VFIO driver use the same initialization code for the DPRC. Introduced a new function which groups this initialization code. The function is exported and may be used by VFIO as well. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-10-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export a cleanup function for DPRCDiana Craciun
Create and export a cleanup function for DPRC. The function is used by the DPRC driver, but it will be used by the VFIO driver as well. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-9-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Export dprc_scan/dprc_remove functions to be used by multiple ↵Diana Craciun
entities Currently the DPRC scan function is used only by the bus driver. But the same functionality will be needed by the VFIO driver. To support this, the dprc scan function was exported and a little bit adjusted to fit both scenarios. Also the scan mutex initialization is done when the bus object is created, not in dprc_probe in order to be used by both VFIO and bus driver. Similarily dprc_remove_devices is exported to be used by VFIO. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-8-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add dprc-reset-container supportBharat Bhushan
DPRC reset is required by VFIO-mc in order to stop a device to further generate DMA transactions. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-7-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Cache the DPRC API versionDiana Craciun
There are already firmware API commands that have multiple versions. For each multiple version command, another command to retrieve the API version is issued. This may introduce an important overhead. The version does not change while the system is running, so the DPRC API version can be safely cached. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-6-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Set the QMAN/BMAN region flagsDiana Craciun
The QMAN region is memory mapped, so it should be of type IORESOURCE_MEM. The region flags bits were wrongly used to pass additional information. Use the bus specific bits for this purpose. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-5-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: add support for 'driver_override' in the mc-busBharat Bhushan
This patch is required for vfio-fsl-mc meta driver to successfully bind layerscape container devices for device passthrough. This patch adds a mechanism to allow a layerscape device to specify a driver rather than a layerscape driver provide a device match. Example to allow a device (dprc.1) to specifically bind with driver (vfio-fsl-mc):- - echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.1/driver_override - echo dprc.1 > /sys/bus/fsl-mc/drivers/fsl_mc_dprc/unbind - echo dprc.1 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-4-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Add a new parameter to dprc_scan_objects functionDiana Craciun
Prepare the dprc_scan_objects function to be used by the VFIO mc driver code. The function is used to scan the mc objects by the bus driver. The same functionality is needed by the VFIO mc driver, but in this case the interrupt configuration is delayed until the userspace configures the interrupts. In order to use the same function in both drivers add a new parameter. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-3-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02bus/fsl-mc: Do no longer export the total number of irqs outside ↵Diana Craciun
dprc_scan_objects The total number of interrupts is only used for some checks outside the dprc_scan_objects function. Furthermore, in some situations the check is made twice. Move the bounds check inside the function for all situations. Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com> Link: https://lore.kernel.org/r/20200929085441.17448-2-diana.craciun@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02mic: vop: copy data to kernel space then write to io memorySherry Sun
Read and write io memory should address align on ARCH ARM. Change to use memcpy_toio to avoid kernel panic caused by the address un-align issue. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: add round_up(x,4) for vring_size to avoid kernel panicSherry Sun
Since struct _mic_vring_info and vring are allocated together and follow vring, if the vring_size() is not four bytes aligned, which will cause the start address of struct _mic_vring_info is not four byte aligned. For example, when vring entries is 128, the vring_size() will be 5126 bytes. The _mic_vring_info struct layout in ddr looks like: 0x90002400: 00000000 00390000 EE010000 0000C0FF Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member. When EP use ioread32(magic) to reads the magic in RC's share memory, it will cause kernel panic on ARM64 platform due to the cross-byte io read. Here read magic in user space use le32toh(vr0->info->magic) will meet the same issue. So add round_up(x,4) for vring_size, then the struct _mic_vring_info will store in this way: 0x90002400: 00000000 00000000 00000039 C0FFEE01 Which will avoid kernel panic when read magic in struct _mic_vring_info. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: build VOP based on CONFIG_VOPSherry Sun
Build module or builtin VOP based on CONFIG_VOP macro. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20200929091106.24624-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02w1: mxc_w1: Fix timeout resolution problem leading to bus errorMartin Fuzzey
On my platform (i.MX53) bus access sometimes fails with w1_search: max_slave_count 64 reached, will continue next search. The reason is the use of jiffies to implement a 200us timeout in mxc_w1_ds2_touch_bit(). On some platforms the jiffies timer resolution is insufficient for this. Fix by replacing jiffies by ktime_get(). For consistency apply the same change to the other use of jiffies in mxc_w1_ds2_reset_bus(). Fixes: f80b2581a706 ("w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1601455030-6607-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02misc: vop: set VIRTIO_F_ACCESS_PLATFORM for vop driverSherry Sun
Set VIRTIO_F_ACCESS_PLATFORM feature for vop driver, as the DMA mapping details shouldn't decide on the virtio implementation, but the host PCIe implementation. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20200929084944.24146-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02fbcon: remove no-op fbcon_set_origin()Tetsuo Handa
We don't need to call vc->vc_sw->con_set_origin() from set_origin() if it is no-op. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/20200915000019.3422-3-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02regmap: debugfs: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-15-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02platform/x86: intel_pmc_core: do not create a static struct deviceGreg Kroah-Hartman
A struct device is a dynamic structure, with reference counting. "Tricking" the kernel to make a dynamic structure static, by working around the driver core release detection logic, is not nice. Because of this, this code has been used as an example for others on "how to do things", which is just about the worst thing possible to have happen. Fix this all up by making the platform device dynamic and providing a real release function. Fixes: b02f6a2ef0a1 ("platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"") Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20200923184803.192265-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:15:37 +0000