| Age | Commit message (Collapse) | Author |
|---|
|
Modify dpi power on/off sequence so that the first gpio operation will
take effect.
Fixes: 6bd4763fd532 ("drm/mediatek: set dpi pin mode to gpio low to avoid leakage current")
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Several libata generic code fixes for rc5:
- Add missing translation of the SYNCHRONIZE CACHE 16 scsi command as
this command is mandatory for host-managed ZBC drives.
The lack of support for it in libata-scsi was causing issues with
some passthrough applications using ZBC drives (from Shin'ichiro).
- Fix the error path of libata-transport host, port, link and device
attributes initialization (from Yingliang).
- Prevent issuing new commands to a drive that is in the NCQ error
state and undergoing recovery (From Niklas).
This bug went unnoticed for a long time as commands issued to a
drive in error state are aborted immediately and retried by the
scsi layer, hiding the useless abort-and-retry sequence"
* tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: do not issue non-internal commands once EH is pending
ata: libata-transport: fix error handling in ata_tdev_add()
ata: libata-transport: fix error handling in ata_tlink_add()
ata: libata-transport: fix error handling in ata_tport_add()
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
|
|
We're currently hitting the WARN_ON in mctp_i2c_flow_release:
if (midev->release_count > midev->i2c_lock_count) {
WARN_ONCE(1, "release count overflow");
This may be hit if we expire a flow before sending the first packet it
contains - as we will not be pairing the increment of release_count
(performed on flow release) with the i2c lock operation (only
performed on actual TX).
To fix this, only release a flow if we've encountered it previously (ie,
dev_flow_state does not indicate NEW), as we will mark the flow as
ACTIVE at the same time as accounting for the i2c lock operation. We
also need to add an INVALID flow state, to indicate when we've done the
release.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Tested-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221110053135.329071-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When stmmac_xdp_release() is called, there is a possibility that tx
function is still running on other queues which will lead to tx queue
timed out and reset adapter.
This commit ensure that tx function is not running xdp before release
flow continue to run.
Fixes: ac746c8520d9 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Mohd Faizal Abdul Rahim <faizal.abdul.rahim@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20221110064552.22504-1-noor.azura.ahmad.tarmizi@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current driver code will read device tree node information,
and set default values if there is no info provided.
This is not done in non-OF devices leading to SGMII fifo depths being
set to the smallest size.
This patch sets the value to the default value of the PHY as stated in the
PHY datasheet.
Fixes: 4dc08dcc9f6f ("net: phy: dp83867: introduce critical chip default init for non-of platform")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221110054938.925347-1-michael.wei.hong.sit@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A problem about hinic create debugfs failed is triggered with the
following log given:
[ 931.419023] debugfs: Directory 'hinic' with parent '/' already present!
The reason is that hinic_module_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of hinic can never be created later.
hinic_module_init()
hinic_dbg_register_debugfs() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: 253ac3a97921 ("hinic: add support to query sq info")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221110021642.80378-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
use put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the
kfree() is removed. list_del() is called in mISDN_dsp_dev_release(),
so it need be initialized.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109132832.3270119-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev is allocated in bgmac_alloc() with devm_alloc_etherdev() and will
be auto released in ->remove and ->probe failure path. Using free_netdev()
in bgmac_enet_remove() leads to double free.
Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150136.2991171-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-6-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
@@
struct drm_display_mode *mode;
@@
- &*mode
+ mode
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
|
|
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.
Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;
@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1
@@
expression decl.E;
@@
- &*E
+ E
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-4-ville.syrjala@linux.intel.com
|
|
Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
While the ATA specification states that a device should return command
aborted for all commands queued after the device has entered error state,
since ATA only keeps the sense data for the latest command (in non-NCQ
case), we really don't want to send block layer commands to the device
after it has entered error state. (Only ATA EH commands should be sent,
to read the sense data etc.)
Currently, scsi_queue_rq() will check if scsi_host_in_recovery()
(state is SHOST_RECOVERY), and if so, it will _not_ issue a command via:
scsi_dispatch_cmd() -> host->hostt->queuecommand() (ata_scsi_queuecmd())
-> __ata_scsi_queuecmd() -> ata_scsi_translate() -> ata_qc_issue()
Before commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
when receiving a TFES error IRQ, the call chain looked like this:
ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort() ->
ata_qc_complete() -> ata_qc_schedule_eh() -> blk_abort_request() ->
blk_rq_timed_out() -> q->rq_timed_out_fn() (scsi_times_out()) ->
scsi_eh_scmd_add() -> scsi_host_set_state(shost, SHOST_RECOVERY)
Which meant that as soon as an error IRQ was serviced, SHOST_RECOVERY
would be set.
However, after commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
scsi_times_out() will instead call scsi_abort_command() which will queue
delayed work, and the worker function scmd_eh_abort_handler() will call
scsi_eh_scmd_add(), which calls scsi_host_set_state(shost, SHOST_RECOVERY).
So now, after the TFES error IRQ has been serviced, we need to wait for
the SCSI workqueue to run its work before SHOST_RECOVERY gets set.
It is worth noting that, even before commit e494f6a72839 ("[SCSI] improved
eh timeout handler"), we could receive an error IRQ from the time when
scsi_queue_rq() checks scsi_host_in_recovery(), to the time when
ata_scsi_queuecmd() is actually called.
In order to handle both the delayed setting of SHOST_RECOVERY and the
window where we can receive an error IRQ, add a check against
ATA_PFLAG_EH_PENDING (which gets set when servicing the error IRQ),
inside ata_scsi_queuecmd() itself, while holding the ap->lock.
(Since the ap->lock is held while servicing IRQs.)
Fixes: e494f6a72839 ("[SCSI] improved eh timeout handler")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Quiet user passthrough command errors (Keith Busch)
- Fix memory leak in nvmet_subsys_attr_model_store_locked
- Fix a memory leak in nvmet-auth (Sagi Grimberg)
- Fix a potential NULL point deref in bfq (Yu)
- Allocate command/response buffers separately for DMA for sed-opal,
rather than rely on embedded alignment (Serge)
* tag 'block-6.1-2022-11-11' of git://git.kernel.dk/linux:
nvmet: fix a memory leak
nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
nvme: quiet user passthrough command errors
block: sed-opal: kmalloc the cmd/resp buffers
block, bfq: fix null pointer dereference in bfq_bio_bfqg()
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity check to the dma-buf mmaping callback to ensure
that the locking assumption won't regress in the future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-7-dmitry.osipenko@collabora.com
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity checks to the dma-buf mmaping callbacks to ensure
that the locking assumptions won't regress in the future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-6-dmitry.osipenko@collabora.com
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity checks to the dma-buf mmaping callbacks to ensure
that the locking assumptions won't regress in the future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-5-dmitry.osipenko@collabora.com
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity check to the dma-buf mmaping callback to ensure
that the locking assumption won't regress in the future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-4-dmitry.osipenko@collabora.com
|
|
When userspace mmaps dma-buf's fd, the dma-buf reservation lock must be
held. Add locking sanity checks to the dma-buf mmaping callbacks of DRM
drivers to ensure that the locking assumptions won't regress in future.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-3-dmitry.osipenko@collabora.com
|
|
All dma-buf functions has been moved to dynamic locking specification
The dma_buf_mmap_internal() was missed out by accident. Take reservation
lock around file mapping operation to adhere the common locking convention.
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110201349.351294-2-dmitry.osipenko@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- fix memcpy warning about field-spanning write in zcrypt driver
- minor updates to defconfigs
- remove CONFIG_DEBUG_INFO_BTF from all defconfigs and add btf.config
addon config file. It significantly decreases compile time and allows
quickly enabling that option into the current kernel config
- add kasan.config addon config file which allows to easily enable
KASAN into the current kernel config
- binutils commit 906f69cf65da ("IBM zSystems: Issue error for *DBL
relocs on misaligned symbols") caused several link errors. Always
build relocatable kernel to avoid this problem
- raise the minimum clang version to 15.0.0 to avoid silent generation
of a corrupted code
* tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390
s390: always build relocatable kernel
s390/configs: add kasan.config addon config file
s390/configs: move CONFIG_DEBUG_INFO_BTF into btf.config addon config
s390: update defconfigs
s390/zcrypt: fix warning about field-spanning write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix TSC MSR write for root partition (Anirudh Rayabharam)
- Fix definition of vector in pci-hyperv driver (Dexuan Cui)
- A few other misc patches
* tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
MAINTAINERS: remove sthemmin
x86/hyperv: fix invalid writes to MSRs during root partition kexec
clocksource/drivers/hyperv: add data structure for reference TSC MSR
Drivers: hv: fix repeated words in comments
x86/hyperv: Remove BUG_ON() for kmap_local_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Misc minor driver fixes and a big pile of at_hdmac driver fixes. More
work on this driver is done and sitting in next:
- Pile of at_hdmac driver rework which fixes many long standing
issues for this driver.
- couple of stm32 driver fixes for clearing structure and race fix
- idxd fixes for RO device state and batch size
- ti driver mem leak fix
- apple fix for grabbing channels in xlate
- resource leak fix in mv xor"
* tag 'dmaengine-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: at_hdmac: Check return code of dma_async_device_register
dmaengine: at_hdmac: Fix impossible condition
dmaengine: at_hdmac: Don't allow CPU to reorder channel enable
dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
dmaengine: at_hdmac: Fix concurrency over the active list
dmaengine: at_hdmac: Free the memset buf without holding the chan lock
dmaengine: at_hdmac: Fix concurrency over descriptor
dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
dmaengine: at_hdmac: Protect atchan->status with the channel lock
dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_hdmac: Don't start transactions at tx_submit level
dmaengine: at_hdmac: Fix at_lli struct definition
dmaengine: stm32-dma: fix potential race between pause and resume
dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
dmaengine: apple-admac: Fix grabbing of channels in of_xlate
dmaengine: idxd: fix RO device state error after been disabled/reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A relatively large batch of fixes here but all device specific, plus
an update to MAINTAINERS.
The summary print change to the STM32 driver is fixing an issue where
the driver could easily end up spamming the logs with something that
should be a debug message"
* tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amd: Fix SPI_SPD7 value
spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
spi: meson-spicc: fix do_div build error on non-arm64
spi: intel: Use correct mask for flash and protected regions
spi: mediatek: Fix package division error
spi: tegra210-quad: Don't initialise DMA if not supported
MAINTAINERS: Update HiSilicon SFC Driver maintainer
spi: meson-spicc: move wait completion in driver to take bursts delay in account
spi: stm32: Print summary 'callbacks suppressed' message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Provide helper for resetting both SDHCI and CQHCI
- Fix reset for CQHCI (am654, brcmstb, esdhc-imx, of-arasan, tegra)
- Fixup support for MMC_CAP_8_BIT_DATA (esdhc-imx)
* tag 'mmc-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for memory leak (on error path) in Hyper-V driver (Yang
Yingliang)
- regression fix for handling 3rd barrel switch emulation in Wacom
driver (Jason Gerecke)
* tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Fix logic used for 3rd barrel switch emulation
HID: hyperv: fix possible memory leak in mousevsc_probe()
HID: asus: Remove unused variable in asus_report_tool_width()
|
|
Pull drm fixes from Dave Airlie:
"Weekly pull request for graphics, mostly amdgpu and i915, with a
couple of fixes for vc4 and panfrost, panel quirks and a kconfig
change for rcar-du. Nothing seems to be too strange at this stage.
amdgpu:
- Fix s/r in amdgpu_vram_mgr_new
- SMU 13.0.4 update
- GPUVM TLB race fix
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- Vega10 fan fix
- BACO fix for Beige Goby board
- PSR fix
- GPU VM PT locking fixes
amdkfd:
- CRIU fixes
vc4:
- HDMI fixes to vc4.
panfrost:
- Make panfrost's uapi header compile with C++.
- Handle 1 gb boundary correctly in panfrost mmu code.
panel:
- Add rotation quirks for 2 panels.
rcar-du:
- DSI Kconfig fix
i915:
- Fix sg_table handling in map_dma_buf
- Send PSR update also on invalidate
- Do not set cache_dirty for DGFX
- Restore userptr probe_range behaviour"
* tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amd/display: only fill dirty rectangles when PSR is enabled
drm/amdgpu: disable BACO on special BEIGE_GOBY card
drm/amdgpu: Drop eviction lock when allocating PT BO
drm/amdgpu: Unlock bo_list_mutex after error handling
Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
drm/amd/display: Fix gpio port mapping issue
drm/amd/display: Fix reg timeout in enc314_enable_fifo
drm/amd/display: Fix FCLK deviation and tool compile issues
drm/amd/display: Zeromem mypipe heap struct before using it
drm/amd/display: Update SR watermarks for DCN314
drm/amdgpu: workaround for TLB seq race
drm/amdkfd: Fix error handling in criu_checkpoint
drm/amdkfd: Fix error handling in kfd_criu_restore_events
drm/amd/pm: update SMU IP v13.0.4 msg interface header
drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSI
drm/panfrost: Split io-pgtable requests properly
drm/amdgpu: Fix the lpfn checking condition in drm buddy
drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
...
|
|
Summary:
* Add support to turn on/off backlight when changing values in bl_power
file. This is achieved by using function backlight_get_brightness()
in nva3_set_intensity to get current brightness.
Test plan:
* Turn off:
echo 1 > /sys/class/backlight/nv_backlight/bl_power
* Turn on:
echo 0 > /sys/class/backlight/nv_backlight/bl_power
Signed-off-by: Antonio Gomes <antoniospg100@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104220424.41164-1-antoniospg100@gmail.com
|
|
Run a workload on tiles simultaneously by requesting for RP0 frequency.
Pcode can however limit the frequency being granted due to throttling
reasons. This test checks if there is any throttling but does not fail
if RP0 is not granted due to throttle reasons
v2: Fix build error
v3: Use IS_ERR_OR_NULL to check worker
Addressed cosmetic review comments (Tvrtko)
v4: do not skip test on media engines if gt type is GT_MEDIA.
Use correct PERF_LIMIT_REASONS register for MTL (Vinay)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109112541.275021-2-riana.tauro@intel.com
|
|
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
|
|
Extend the size of QSFP EEPROM for types SSF8436 and SFF8636
from 256 to 640 bytes in order to expose all the EEPROM pages by
ethtool.
For SFF-8636 and SFF-8436 specifications, the driver exposes
256 bytes of EEPROM data for ethtool's get_module_eeprom()
callback, resulting in "netlink error: Invalid argument" when
an EEPROM read with an offset larger than 256 bytes is attempted.
Changing the length enumerators to the _MAX_LEN
variants exposes all 640 bytes of the EEPROM allowing upper
pages 1, 2 and 3 to be read.
Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command")
Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split out the display register helper macros to a separate file. For
now, include it from i915_reg.h, but note that there are already files
that don't need i915_reg.h, such as intel_audio.c.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3af47193ff5219b6d2cfe353b752ec4bb44de4f1.1668008071.git.jani.nikula@intel.com
|
|
This is a more logical place for generic helpers.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/623327aee73a515300d99c8d65552ca92f3f0721.1668008071.git.jani.nikula@intel.com
|
|
This is a more logical place for generic helpers.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5161a0c6d98df206c6c4c1add3fc3f2f408020b1.1668008071.git.jani.nikula@intel.com
|
|
In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev.
Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
In ata_tlink_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tlink_delete+0x88/0xb0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tlink_add().
Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tport_delete+0x34/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tport_add().
Fixes: d9027470b886 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
In the error path in ata_tport_add(), when calling put_device(),
ata_tport_release() is called, it will put the refcount of 'ap->host'.
And then ata_host_put() is called again, the refcount is decreased
to 0, ata_host_release() is called, all ports are freed and set to
null.
When unbinding the device after failure, ata_host_stop() is called
to release the resources, it leads a null-ptr-deref(), because all
the ports all freed and null.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ata_host_stop+0x3c/0x84 [libata]
lr : release_nodes+0x64/0xd0
Call trace:
ata_host_stop+0x3c/0x84 [libata]
release_nodes+0x64/0xd0
devres_release_all+0xbc/0x1b0
device_unbind_cleanup+0x20/0x70
really_probe+0x158/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0xb4/0x220
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x40
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__pci_register_driver+0x4c/0x60
ahci_pci_driver_init+0x30/0x1000 [ahci]
Fix this by removing redundant ata_host_put() in the error path.
Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-02
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
net/mlx5e: Fix tc acts array not to be dependent on enum order
net/mlx5e: Fix usage of DMA sync API
net/mlx5e: Add missing sanity checks for max TX WQE size
net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
net/mlx5: Allow async trigger completion execution on single CPU systems
net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================
Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)
This series contains updates to ice and iavf drivers.
Norbert stops disabling VF queues that are not enabled for ice driver.
Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
====================
Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not necessary to free netdev allocated with devm_alloc_etherdev()
and using free_netdev() leads to double free.
Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221109150116.2988194-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix sg_table handling in map_dma_buf (Matthew Auld)
- Send PSR update also on invalidate (Jouni Högander)
- Do not set cache_dirty for DGFX (Niranjana Vishwanathapura)
- Restore userptr probe_range behaviour (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2zCy5q85qE9W0J8@tursulin-desk
|
|
drm_vblank_init() call drmm_add_action_or_reset() with
drm_vblank_init_release() as action. If __drmm_add_action() failed, will
directly call drm_vblank_init_release() with the vblank whose worker is
NULL. As the resule, a null-ptr-deref will happen in
kthread_destroy_worker(). Add the NULL check before calling
drm_vblank_destroy_worker().
BUG: null-ptr-deref
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty
RIP: 0010:kthread_destroy_worker+0x25/0xb0
Call Trace:
<TASK>
drm_vblank_init_release+0x124/0x220 [drm]
? drm_crtc_vblank_restore+0x8b0/0x8b0 [drm]
__drmm_add_action_or_reset+0x41/0x50 [drm]
drm_vblank_init+0x282/0x310 [drm]
vkms_init+0x35f/0x1000 [vkms]
? 0xffffffffc4508000
? lock_is_held_type+0xd7/0x130
? __kmem_cache_alloc_node+0x1c2/0x2b0
? lock_is_held_type+0xd7/0x130
? 0xffffffffc4508000
do_one_initcall+0xd0/0x4f0
...
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 5e6c2b4f9161 ("drm/vblank: Add vblank works")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101070716.9189-3-shangxiaojing@huawei.com
|
|
drm_dev_init() will add drm_dev_init_release() as a callback. When
drmm_add_action() failed, the release function won't be added. As the
result, the ref cnt added by device_get() in drm_dev_init() won't be put
by drm_dev_init_release(), which leads to the memleak. Use
drmm_add_action_or_reset() instead of drmm_add_action() to prevent
memleak.
unreferenced object 0xffff88810bc0c800 (size 2048):
comm "modprobe", pid 8322, jiffies 4305809845 (age 15.292s)
hex dump (first 32 bytes):
e8 cc c0 0b 81 88 ff ff ff ff ff ff 00 00 00 00 ................
20 24 3c 0c 81 88 ff ff 18 c8 c0 0b 81 88 ff ff $<.............
backtrace:
[<000000007251f72d>] __kmalloc+0x4b/0x1c0
[<0000000045f21f26>] platform_device_alloc+0x2d/0xe0
[<000000004452a479>] platform_device_register_full+0x24/0x1c0
[<0000000089f4ea61>] 0xffffffffa0736051
[<00000000235b2441>] do_one_initcall+0x7a/0x380
[<0000000001a4a177>] do_init_module+0x5c/0x230
[<000000002bf8a8e2>] load_module+0x227d/0x2420
[<00000000637d6d0a>] __do_sys_finit_module+0xd5/0x140
[<00000000c99fc324>] do_syscall_64+0x3f/0x90
[<000000004d85aa77>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101070716.9189-2-shangxiaojing@huawei.com
|
|
Fix kernel-doc issue from a previous commit.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 2db609c01495 ("drm/i915/perf: Replace gt->perf.lock with stream->lock for file ops")
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107202410.1976895-1-umesh.nerlige.ramappa@intel.com
|
