| Age | Commit message (Collapse) | Author |
|---|
|
Register a struct led_classdev with the kernel's LED subsystem and
create a throughput-based trigger for it. Then mac80211 makes the LED
blink.
Tested with Tenda U12 (RTL8812AU), Tenda U9 (RTL8811CU), TP-Link Archer
T2U Nano (RTL8811AU), TP-Link Archer T3U Plus (RTL8812BU), Edimax
EW-7611UCB (RTL8821AU), LM842 (RTL8822CU).
Also tested with devices which don't have LEDs: the laptop's internal
RTL8822CE and a no-name RTL8723DU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/6c43451f-ab2f-4e76-ac6e-ff5a18dd981d@gmail.com
|
|
This is the equivalent of commit 28818b4d871b ("wifi: rtw88: usb: Fix
disconnection after beacon loss") for SDIO chips.
Tested on Pinephone (RTL8723CS), random disconnections became rare,
instead of a frequent nuisance.
Cc: stable@vger.kernel.org
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # Tested on Pinebook
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250106135434.35936-1-fiona.klute@gmx.de
|
|
Fix 3 typos in 8703b driver. 2 typos in calibration routines are not
fatal and do not seem to have any impact, just fix them to match vendor
driver.
However the last one in rtw8703b_set_channel_bb() clears too many bits
in REG_OFDM0_TX_PSD_NOISE, causing TX and RX issues (neither rate goes
above MCS0-MCS1). Vendor driver clears only 2 most significant bits.
With the last typo fixed, the driver is able to reach MCS7 on Pinebook
Cc: stable@vger.kernel.org
Fixes: 9bb762b3a957 ("wifi: rtw88: Add definitions for 8703b chip")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103075107.1337533-1-anarsoul@gmail.com
|
|
It's not used for anything.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/b80f7904-c6b4-4d12-a5f9-69ab9b965732@gmail.com
|
|
Add some extra configuration for USB devices. Currently only RTL8822BU
version (cut) D needs this. The new code makes use of the existing
usb3_param_8822b array from rtw8822b.c.
A user reported that TP-Link Archer T3U in USB 3 mode was randomly
disconnecting from USB:
[ 26.036502] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
...
[ 27.576491] usb 2-2: USB disconnect, device number 3
[ 28.621528] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
...
[ 45.984521] usb 2-2: USB disconnect, device number 4
...
[ 46.845585] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd
...
[ 94.400380] usb 2-2: USB disconnect, device number 5
...
[ 95.590421] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
This patch fixes that.
Link: https://github.com/lwfinger/rtw88/issues/262
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/9d312b14-0146-4be8-9c50-ef432234db50@gmail.com
|
|
RTL8922AE-VS is a variant of RTL8922AE, which is supported by firmware
version after 0.35.54.0 and only can support up to MCS11. Add a variant
struct to describe these requirements accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250108020955.14668-3-pkshih@realtek.com
|
|
Firmware after version 0.35.51.0 defines and exports more hardware
capabilities, which driver will consider reported QAM field as
EHT MCS capability to register hardware.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250108020955.14668-2-pkshih@realtek.com
|
|
The rtwdev->scanning flag isn't protected by mutex originally, so
cancel_hw_scan can pass the condition, but suddenly hw_scan completion
unset the flag and calls ieee80211_scan_completed() that will free
local->hw_scan_req. Then, cancel_hw_scan raises null-ptr-deref and
use-after-free. Fix it by moving the check condition to where
protected by mutex.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 2 PID: 6922 Comm: kworker/2:2 Tainted: G OE
Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB6WW (2.76 ) 09/10/2019
Workqueue: events cfg80211_conn_work [cfg80211]
RIP: 0010:rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core]
Code: 00 45 89 6c 24 1c 0f 85 23 01 00 00 48 8b 85 20 ff ff ff 48 8d
RSP: 0018:ffff88811fd9f068 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88811fd9f258 RCX: 0000000000000001
RDX: 0000000000000011 RSI: 0000000000000001 RDI: 0000000000000089
RBP: ffff88811fd9f170 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88811fd9f108 R11: 0000000000000000 R12: ffff88810e47f960
R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8881d6f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007531dfca55b0 CR3: 00000001be296004 CR4: 00000000001706e0
Call Trace:
<TASK>
? show_regs+0x61/0x73
? __die_body+0x20/0x73
? die_addr+0x4f/0x7b
? exc_general_protection+0x191/0x1db
? asm_exc_general_protection+0x27/0x30
? rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core]
? rtw89_fw_h2c_scan_offload_be+0x458/0x13c3 [rtw89_core]
? __pfx_rtw89_fw_h2c_scan_offload_be+0x10/0x10 [rtw89_core]
? do_raw_spin_lock+0x75/0xdb
? __pfx_do_raw_spin_lock+0x10/0x10
rtw89_hw_scan_offload+0xb5e/0xbf7 [rtw89_core]
? _raw_spin_unlock+0xe/0x24
? __mutex_lock.constprop.0+0x40c/0x471
? __pfx_rtw89_hw_scan_offload+0x10/0x10 [rtw89_core]
? __mutex_lock_slowpath+0x13/0x1f
? mutex_lock+0xa2/0xdc
? __pfx_mutex_lock+0x10/0x10
rtw89_hw_scan_abort+0x58/0xb7 [rtw89_core]
rtw89_ops_cancel_hw_scan+0x120/0x13b [rtw89_core]
ieee80211_scan_cancel+0x468/0x4d0 [mac80211]
ieee80211_prep_connection+0x858/0x899 [mac80211]
ieee80211_mgd_auth+0xbea/0xdde [mac80211]
? __pfx_ieee80211_mgd_auth+0x10/0x10 [mac80211]
? cfg80211_find_elem+0x15/0x29 [cfg80211]
? is_bss+0x1b7/0x1d7 [cfg80211]
ieee80211_auth+0x18/0x27 [mac80211]
cfg80211_mlme_auth+0x3bb/0x3e7 [cfg80211]
cfg80211_conn_do_work+0x410/0xb81 [cfg80211]
? __pfx_cfg80211_conn_do_work+0x10/0x10 [cfg80211]
? __kasan_check_read+0x11/0x1f
? psi_group_change+0x8bc/0x944
? __kasan_check_write+0x14/0x22
? mutex_lock+0x8e/0xdc
? __pfx_mutex_lock+0x10/0x10
? __pfx___radix_tree_lookup+0x10/0x10
cfg80211_conn_work+0x245/0x34d [cfg80211]
? __pfx_cfg80211_conn_work+0x10/0x10 [cfg80211]
? update_cfs_rq_load_avg+0x3bc/0x3d7
? sched_clock_noinstr+0x9/0x1a
? sched_clock+0x10/0x24
? sched_clock_cpu+0x7e/0x42e
? newidle_balance+0x796/0x937
? __pfx_sched_clock_cpu+0x10/0x10
? __pfx_newidle_balance+0x10/0x10
? __kasan_check_read+0x11/0x1f
? psi_group_change+0x8bc/0x944
? _raw_spin_unlock+0xe/0x24
? raw_spin_rq_unlock+0x47/0x54
? raw_spin_rq_unlock_irq+0x9/0x1f
? finish_task_switch.isra.0+0x347/0x586
? __schedule+0x27bf/0x2892
? mutex_unlock+0x80/0xd0
? do_raw_spin_lock+0x75/0xdb
? __pfx___schedule+0x10/0x10
process_scheduled_works+0x58c/0x821
worker_thread+0x4c7/0x586
? __kasan_check_read+0x11/0x1f
kthread+0x285/0x294
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x6f
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 895907779752 ("rtw89: 8852a: add ieee80211_ops::hw_scan")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250107114254.6769-1-pkshih@realtek.com
|
|
For each MCC role, time limits, including max_tob_us, max_toa_us, and
mac_dur_us, are calculated if there are NoA attributes. The relation
between these time limits is "max_dur_us = max_tob_us + max_toa_us".
Then, the unit is converted from us to TU. However, originally, each
time limit was divided by 1024 independently. It missed to consider
the cases that max_tob_us or max_toa_us is not divisible by 1024. It
causes the result breaks "max_dur (TU) = max_tob (TU) + max_toa (TU)".
Finally, when MCC calculates pattern parameters based on these kinds
of time limits, it might not perform well.
Fixes: b09df09b55fb ("wifi: rtw89: mcc: initialize start flow")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103074412.124066-1-pkshih@realtek.com
|
|
For early chips, the RX BD info contains FS/LS bits for first/last segments
of a receiving packet. For 8922AE, the FS bit should be ignored, or it
may throw warning:
rtw89_8922ae 0000:1a:00.0: skb should not be ready before first segment start
To have compatible logic, FS determined by what pending skb is existing
(!new) or not.
Since we expect every single receiving packet in single one segment,
enlarge 4 bytes for RX BD info, and add a debug message to note if
RX buffer is possibly smaller than expected size.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103025126.15378-1-pkshih@realtek.com
|
|
If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered
without removing the interface first. Then the mgnt_entry list init again,
causing the list_empty() check in rtw89_chanctx_ops_assign_vif()
useless, and list_add_tail() again. Therefore, we have added a check to
prevent double adding of the list.
rtw89_8852ce 0000:01:00.0: failed to check wow status disabled
rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready
rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw
rtw89_8852ce 0000:01:00.0: failed to disable wow
rtw89_8852ce 0000:01:00.0: failed to resume for wow -110
rtw89_8852ce 0000:01:00.0: MAC has already powered on
i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs
list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:34!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O
Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:__list_add_valid_or_report+0x9f/0xb0
Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ...
RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400
RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff
RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff
R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40
R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060
FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? die+0xaa/0xd0
? do_trap+0x9f/0x170
? __list_add_valid_or_report+0x9f/0xb0
? __list_add_valid_or_report+0x9f/0xb0
? handle_invalid_op+0x69/0x90
? __list_add_valid_or_report+0x9f/0xb0
? exc_invalid_op+0x3c/0x50
? asm_exc_invalid_op+0x16/0x20
? __list_add_valid_or_report+0x9f/0xb0
rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1]
? __mutex_unlock_slowpath+0xa0/0xf0
rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1]
drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6]
ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
? dev_printk_emit+0x51/0x70
? _dev_info+0x6e/0x90
wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed]
dpm_run_callback+0x37/0x1e0
device_resume+0x26d/0x4b0
? __pfx_dpm_watchdog_handler+0x10/0x10
async_resume+0x1d/0x30
async_run_entry_fn+0x29/0xd0
worker_thread+0x397/0x970
kthread+0xed/0x110
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x38/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 68ec751b2881 ("wifi: rtw89: chan: manage active interfaces")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103024500.14990-1-pkshih@realtek.com
|
|
Header conversion should only be used with MLO connections. Otherwise
P2P connection fails due to wrong probe responses sent. Fix it
accordingly.
Fixes: b8499664fca9 ("wifi: rtw89: Add header conversion for MLO connections")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-4-pkshih@realtek.com
|
|
During rtw89_entity_recalc_mgnt_roles(), there is a normalizing process
which will re-order the list if an entry with target pattern is found.
And once one is found, should have aborted the list_for_each_entry. But,
`break` just aborted the inner for-loop. The outer list_for_each_entry
still continues. Normally, only the first entry will match the target
pattern, and the re-ordering will change nothing, so there won't be
soft lockup. However, in some special cases, soft lockup would happen.
Fix it by `goto fill` to break from the list_for_each_entry.
The following is a sample of kernel log for this problem.
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [wpa_supplicant:2055]
[...]
RIP: 0010:rtw89_entity_recalc ([...] chan.c:392 chan.c:479) rtw89_core
[...]
Fixes: 68ec751b2881 ("wifi: rtw89: chan: manage active interfaces")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-3-pkshih@realtek.com
|
|
When starting/proceeding MCC, it will abort an ongoing hw scan process.
In the proceeding cases, it unexpectedly tries to abort a non-exist hw
scan process. Then, a trace shown at the bottom will happen. This problem
is caused by a previous commit which changed some call sequence inside
rtw89_hw_scan_complete() to fix some coex problems. These changes lead
to our scanning flag was not cleared when proceeding MCC. To keep the
fixes on coex, and resolve the problem here, re-consider the related
call sequence.
The known sequence requirements are listed below.
* the old sequence:
A. notify coex
B. clear scanning flag
C. proceed chanctx
C-1. set channel
C-2. proceed MCC
(the problem: A needs to be after C-1)
* the current sequence:
C. proceed chanctx
C-1. set channel
C-2. proceed MCC
A. notify coex
B. clear scanning flag
(the problem: C-2 needs to be after B)
So, now let hw scan caller pass a callback to proceed chanctx if needed.
Then, the new sequence will be like the below.
C-1. set channel
A. notify coex
B. clear scanning flag
C-2. proceed MCC
The following is the kernel log for the problem in current sequence.
rtw89_8852be 0000:04:00.0: rtw89_hw_scan_offload failed ret -110
------------[ cut here ]------------
[...]
CPU: 2 PID: 3991 Comm: kworker/u16:0 Tainted: G OE 6.6.17 #3
Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018
Workqueue: events_unbound wiphy_work_cancel [cfg80211]
RIP: 0010:ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
Code: 9c 24 d0 11 00 00 49 39 dd 0f 85 46 ff ff ff 4c 89 e7 e8 09 2d
RSP: 0018:ffffb27783643d48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8a2280964bc0 RSI: 0000000000000000 RDI: ffff8a23df580900
RBP: ffffb27783643d88 R08: 0000000000000001 R09: 0000000000000400
R10: 0000000000000000 R11: 0000000000008268 R12: ffff8a23df580900
R13: ffff8a23df581b00 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8a258e680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f26a0654000 CR3: 000000002ea2e002 CR4: 00000000001706e0
Call Trace:
<TASK>
? show_regs+0x68/0x70
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
? __warn+0x8f/0x150
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
? report_bug+0x1f5/0x200
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? ieee80211_sched_scan_stopped+0xaea/0xd80 [mac80211]
ieee80211_scan_work+0x14a/0x650 [mac80211]
? __queue_work+0x10f/0x410
wiphy_work_cancel+0x2fb/0x310 [cfg80211]
process_scheduled_works+0x9d/0x390
? __pfx_worker_thread+0x10/0x10
worker_thread+0x15b/0x2d0
? __pfx_worker_thread+0x10/0x10
kthread+0x108/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: f16c40acd319 ("wifi: rtw89: Fix TX fail with A2DP after scanning")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241231004811.8646-2-pkshih@realtek.com
|
|
Limit ETS QoS channel to AIROHA_NUM_QOS_CHANNELS in
airoha_tc_setup_qdisc_ets() in order to align the configured channel to
the value set in airoha_dev_select_queue().
Fixes: 20bf7d07c956 ("net: airoha: Add sched ETS offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250107-airoha-ets-fix-chan-v1-1-97f66ed3a068@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DP83822 supports up to three configurable Light Emitting Diode (LED)
pins: LED_0, LED_1 (GPIO1), COL (GPIO2) and RX_D3 (GPIO3). Several
functions can be multiplexed onto the LEDs for different modes of
operation. LED_0 and COL (GPIO2) use the MLED function. MLED can be routed
to only one of these two pins at a time. Add minimal LED controller driver
supporting the most common uses with the 'netdev' trigger.
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250107-dp83822-leds-v2-1-5b260aad874f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to fix error handling in drivetemp driver"
* tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
|
|
exynos_bus_parse_of() still declares a parameter struct device_node that
is not used yet. This parameter is unnecessary and should be removed.
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-01-10
Pierre-Henry Moussay adds PIC64GX compatibility to the DT bindings for
Microchip's mpfs-can IP core.
The next 3 patches are by Sean Nyekjaer and target the tcan4x5x
driver. First the DT bindings is converted to DT schema, then nWKRQ
voltage selection is added to the driver.
Dario Binacchi's patch for the sun4i_can makes the driver more
consistent by adding a likely() to the driver.
Another patch by Sean Nyekjaer for the tcan4x5x driver gets rid of a
false error message.
Charan Pedumuru converts the atmel-can DT bindings to DT schema.
The next 2 patches are by Oliver Hartkopp. The first one maps Oliver's
former mail addresses to a dedicated CAN mail address. The second one
assigns net/sched/em_canid.c additionally to the CAN maintainers.
Ariel Otilibili's patch removes dead code from the CAN dev helper.
The next 3 patches are by Sean Nyekjaer and add HW standby support to
the tcan4x5x driver.
A patch by Dario Binacchi fixes the DT bindings for the st,stm32-bxcan
driver.
The last 4 patches are by Jimmy Assarsson and target the kvaser_usb
and the kvaser_pciefd driver: error statistics are improved and
CAN_CTRLMODE_BERR_REPORTING is added.
* tag 'linux-can-next-for-6.14-20250110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_pciefd: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_pciefd: Update stats and state even if alloc_can_err_skb() fails
can: kvaser_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
can: kvaser_usb: Update stats and state even if alloc_can_err_skb() fails
dt-bindings: can: st,stm32-bxcan: fix st,gcan property type
can: m_can: call deinit/init callback when going into suspend/resume
can: tcan4x5x: add deinit callback to set standby mode
can: m_can: add deinit callback
can: dev: can_get_state_str(): Remove dead code
MAINTAINERS: assign em_canid.c additionally to CAN maintainers
mailmap: add an entry for Oliver Hartkopp
dt-bindings: net: can: atmel: Convert to json schema
can: tcan4x5x: get rid of false clock errors
can: sun4i_can: continue to use likely() to check skb
can: tcan4x5x: add option for selecting nWKRQ voltage
dt-bindings: can: tcan4x5x: Document the ti,nwkrq-voltage-vio option
dt-bindings: can: convert tcan4x5x.txt to DT schema
dt-bindings: can: mpfs: add PIC64GX CAN compatibility
====================
Link: https://patch.msgid.link/20250110112712.3214173-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement a PCI target driver using the PCI endpoint framework. This
requires hardware with a PCI controller capable of executing in endpoint
mode.
The PCI endpoint framework is used to set up a PCI endpoint function
and its BAR compatible with a NVMe PCI controller. The framework is also
used to map local memory to the PCI address space to execute MMIO
accesses for retrieving NVMe commands from submission queues and posting
completion entries to completion queues. If supported, DMA is used for
command retreival and command data transfers, based on the PCI address
segments indicated by the command using either PRPs or SGLs.
The NVMe target driver relies on the NVMe target core code to execute
all commands isssued by the host. The PCI target driver is mainly
responsible for the following:
- Initialization and teardown of the endpoint device and its backend
PCI target controller. The PCI target controller is created using a
subsystem and a port defined through configfs. The port used must be
initialized with the "pci" transport type. The target controller is
allocated and initialized when the PCI endpoint is started by binding
it to the endpoint PCI device (nvmet_pci_epf_epc_init() function).
- Manage the endpoint controller state according to the PCI link state
and the actions of the host (e.g. checking the CC.EN register) and
propagate these actions to the PCI target controller. Polling of the
controller enable/disable is done using a delayed work scheduled
every 5ms (nvmet_pci_epf_poll_cc() function). This work is started
whenever the PCI link comes up (nvmet_pci_epf_link_up() notifier
function) and stopped when the PCI link comes down
(nvmet_pci_epf_link_down() notifier function).
nvmet_pci_epf_poll_cc() enables and disables the PCI controller using
the functions nvmet_pci_epf_enable_ctrl() and
nvmet_pci_epf_disable_ctrl(). The controller admin queue is created
using nvmet_pci_epf_create_cq(), which calls nvmet_cq_create(), and
nvmet_pci_epf_create_sq() which uses nvmet_sq_create().
nvmet_pci_epf_disable_ctrl() always resets the PCI controller to its
initial state so that nvmet_pci_epf_enable_ctrl() can be called
again. This ensures correct operation if, for instance, the host
reboots causing the PCI link to be temporarily down.
- Manage the controller admin and I/O submission queues using local
memory. Commands are obtained from submission queues using a work
item that constantly polls the doorbells of all submissions queues
(nvmet_pci_epf_poll_sqs() function). This work is started whenever
the controller is enabled (nvmet_pci_epf_enable_ctrl() function) and
stopped when the controller is disabled (nvmet_pci_epf_disable_ctrl()
function). When new commands are submitted by the host, DMA transfers
are used to retrieve the commands.
- Initiate the execution of all admin and I/O commands using the target
core code, by calling a requests execute() function. All commands are
individually handled using a per-command work item
(nvmet_pci_epf_iod_work() function). A command overall execution
includes: initializing a struct nvmet_req request for the command,
using nvmet_req_transfer_len() to get a command data transfer length,
parse the command PRPs or SGLs to get the PCI address segments of
the command data buffer, retrieve data from the host (if the command
is a write command), call req->execute() to execute the command and
transfer data to the host (for read commands).
- Handle the completions of commands as notified by the
->queue_response() operation of the PCI target controller
(nvmet_pci_epf_queue_response() function). Completed commands are
added to a list of completed command for their CQ. Each CQ list of
completed command is processed using a work item
(nvmet_pci_epf_cq_work() function) which posts entries for the
completed commands in the CQ memory and raise an IRQ to the host to
signal the completion. IRQ coalescing is supported as mandated by the
NVMe base specification for PCI controllers. Of note is that
completion entries are transmitted to the host using MMIO, after
mapping the completion queue memory to the host PCI address space.
Unlike for retrieving commands from SQs, DMA is not used as it
degrades performance due to the transfer serialization needed (which
delays completion entries transmission).
The configuration of a NVMe PCI endpoint controller is done using
configfs. First the NVMe PCI target controller configuration must be
done to set up a subsystem and a port with the "pci" addr_trtype
attribute. The subsystem can be setup using a file or block device
backed namespace or using a passthrough NVMe device. After this, the
PCI endpoint can be configured and bound to the PCI endpoint controller
to start the NVMe endpoint controller.
In order to not overcomplicate this initial implementation of an
endpoint PCI target controller driver, protection information is not
for now supported. If the PCI controller port and namespace are
configured with protection information support, an error will be
returned when the controller is created and initialized when the
endpoint function is started. Protection information support will be
added in a follow-up patch series.
Using a Rock5B board (Rockchip RK3588 SoC, PCI Gen3x4 endpoint
controller) with a target PCI controller setup with 4 I/O queues and a
null_blk block device as a namespace, the maximum performance using fio
was measured at 131 KIOPS for random 4K reads and up to 2.8 GB/S
throughput. Some data points are:
Rnd read, 4KB, QD=1, 1 job : IOPS=16.9k, BW=66.2MiB/s (69.4MB/s)
Rnd read, 4KB, QD=32, 1 job : IOPS=78.5k, BW=307MiB/s (322MB/s)
Rnd read, 4KB, QD=32, 4 jobs: IOPS=131k, BW=511MiB/s (536MB/s)
Seq read, 512KB, QD=32, 1 job : IOPS=5381, BW=2691MiB/s (2821MB/s)
The NVMe PCI endpoint target driver is not intended for production use.
It is a tool for learning NVMe, exploring existing features and testing
implementations of new NVMe features.
Co-developed-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVMe base specification v2.1 mandates support for the arbitration
feature (NVME_FEAT_ARBITRATION). Introduce the data structure
struct nvmet_feat_arbitration to define the high, medium and low
priority weight fields and the arbitration burst field of this feature
and implement the functions nvmet_get_feat_arbitration() and
nvmet_set_feat_arbitration() functions to get and set these fields.
Since there is no generic way to implement support for the arbitration
feature, these functions respectively use the controller get_feature()
and set_feature() operations to process the feature with the help of
the controller driver. If the controller driver does not implement these
operations and a get feature command or a set feature command for this
feature is received, the command is failed with an invalid field error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe base specifications v2.1 mandate supporting the interrupt
config feature (NVME_FEAT_IRQ_CONFIG) for PCI controllers. Introduce the
data structure struct nvmet_feat_irq_config to define the coalescing
disabled (cd) and interrupt vector (iv) fields of this feature and
implement the functions nvmet_get_feat_irq_config() and
nvmet_set_feat_irq_config() functions to get and set these fields. These
functions respectively use the controller get_feature() and
set_feature() operations to fill and handle the fields of struct
nvmet_feat_irq_config.
Support for this feature is prohibited for fabrics controllers. If a get
feature command or a set feature command for this feature is received
for a fabrics controller, the command is failed with an invalid field
error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe base specifications v2.1 mandate Supporting the interrupt
coalescing feature (NVME_FEAT_IRQ_COALESCE) for PCI controllers.
Introduce the data structure struct nvmet_feat_irq_coalesce to define
the time and threshold (thr) fields of this feature and implement the
functions nvmet_get_feat_irq_coalesce() and
nvmet_set_feat_irq_coalesce() to get and set this feature. These
functions respectively use the controller get_feature() and
set_feature() operations to fill and handle the fields of struct
nvmet_feat_irq_coalesce.
While the Linux kernel nvme driver does not use this feature and thus
will not complain if it is not implemented, other major OSes fail
initializing the NVMe device if this feature support is missing.
Support for this feature is prohibited for fabrics controllers. If a get
feature or set feature command for this feature is received for a
fabrics controller, the command is failed with an invalid field error.
Suggested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The NVMe specifications mandate support for the host identifier
set_features for controllers that also supports reservations. Satisfy
this requirement by implementing handling of the NVME_FEAT_HOST_ID
feature for the nvme_set_features command. This implementation is for
now effective only for PCI target controllers. For other controller
types, the set features command is failed with a NVME_SC_CMD_SEQ_ERROR
status as before.
As noted in the code, 128 bits host identifiers are supported since the
NVMe base specifications version 2.1 indicate in section 5.1.25.1.28.1
that "The controller may support a 64-bit Host Identifier...".
The RHII (Reservations and Host Identifier Interaction) bit of the
controller attribute (ctratt) field of the identify controller data is
also set to indicate that a host ID of "0" is supported but that the
host ID must be a non-zero value to use reservations.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The implementation of some features cannot always be done generically by
the target core code. Arbitraion and IRQ coalescing features are
examples of such features: their implementation must be provided (at
least partially) by the target controller driver.
Introduce the set_feature() and get_feature() controller fabrics
operations (in struct nvmet_fabrics_ops) to allow supporting such
features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Support for SGL is optional for the PCI transport. Modify
nvmet_req_init() to not require the NVME_CMD_SGL_METABUF command flag to
be set if the target controller transport type is NVMF_TRTYPE_PCI.
In addition to this, the NVMe base specification v2.1 mandate that all
admin commands use PRP, that is, have CDW0.PSDT cleared to 0. Modify
nvmet_parse_admin_cmd() to check this.
Finally, modify nvmet_check_transfer_len() and
nvmet_check_data_len_lte() to return the appropriate error status
depending on the command using SGL or PRP. Since for fabrics
nvmet_req_init() checks that a command uses SGL, always, this change
affects only PCI target controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The I/O submission queue management admin commands
(nvme_admin_delete_sq, nvme_admin_create_sq, nvme_admin_delete_cq,
and nvme_admin_create_cq) are mandatory admin commands for I/O
controllers using the PCI transport, that is, support for these commands
is mandatory for a a PCI target I/O controller.
Implement support for these commands by adding the functions
nvmet_execute_delete_sq(), nvmet_execute_create_sq(),
nvmet_execute_delete_cq() and nvmet_execute_create_cq() to set as the
execute method of requests for these commands. These functions will
return an invalid opcode error for any controller that is not a PCI
target controller. Support for the I/O queue management commands is also
reported in the command effect log of PCI target controllers (using
nvmet_get_cmd_effects_admin()).
Each management command is backed by a controller fabric operation
that can be defined by a PCI target controller driver to setup I/O
queues using nvmet_sq_create() and nvmet_cq_create() or delete I/O
queues using nvmet_sq_destroy().
As noted in a comment in nvmet_execute_create_sq(), we do not yet
support sharing a single CQ between multiple SQs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Introduce the new functions nvmet_sq_create() and nvmet_cq_create() to
allow a target driver to initialize and setup admin and IO queues
directly, without needing to execute connect fabrics commands.
The helper functions nvmet_check_cqid() and nvmet_check_sqid() are
implemented to check the correctness of SQ and CQ IDs when
nvmet_sq_create() and nvmet_cq_create() are called.
nvmet_sq_create() and nvmet_cq_create() are primarily intended for use
with PCI target controller drivers and thus are not well integrated
with the current queue creation of fabrics controllers using the connect
command. These fabrices drivers are not modified to use these functions.
This simple implementation of SQ and CQ management for PCI target
controller drivers does not allow multiple SQs to share the same CQ,
similarly to other fabrics transports. This is a specification
violation. A more involved set of changes will follow to add support for
this required completion queue sharing feature.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add the new function nvmet_req_transfer_len() to parse a request command
to extract the transfer length of the command. This function
implementation relies on multiple helper functions for parsing I/O
commands (nvmet_io_cmd_transfer_len()), admin commands
(nvmet_admin_cmd_data_len()) and fabrics connect commands
(nvmet_connect_cmd_data_len).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Introduce struct nvmet_alloc_ctrl_args to define the arguments for
the function nvmet_alloc_ctrl() to avoid the need for passing a pointer
to a struct nvmet_req as an argument. This new data structure aggregates
together the arguments that were passed to nvmet_alloc_ctrl()
(subsysnqn, hostnqn and kato), together with the struct nvmet_req fields
used by nvmet_alloc_ctrl(), that is, the fields port, p2p_client, and
ops as input and the result and error_loc fields as output, as well as a
status field. nvmet_alloc_ctrl() is also changed to return a pointer
to the allocated and initialized controller structure instead of a
status code, as the status is now returned through the status field of
struct nvmet_alloc_ctrl_args.
The function nvmet_setup_p2p_ns_map() is changed to not take a pointer
to a struct nvmet_req as argument, instead, directly specify the
p2p_client device pointer needed as argument.
The code in nvmet_execute_admin_connect() that initializes a new target
controller after allocating it is moved into nvmet_alloc_ctrl().
The code that sets up an admin queue for the controller (and the call
to nvmet_install_queue()) remains in nvmet_execute_admin_connect().
Finally, nvmet_alloc_ctrl() is also exported to allow target drivers to
use this function directly to allocate and initialize a new controller
structure without the need to rely on a fabrics connect command request.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the transport type NVMF_TRTYPE_PCI for PCI endpoint targets.
This transport type is defined using the value 0 which is reserved in
the NVMe base specifications v2.1 (Figure 294). Given that struct
nvmet_port are zeroed out on creation, to avoid having this transsport
type becoming the new default, nvmet_referral_make() and
nvmet_ports_make() are modified to initialize a port discovery address
transport type field (disc_addr.trtype) to NVMF_TRTYPE_MAX.
Any port using this transport type is also skipped and not reported in
the discovery log page (nvmet_execute_disc_get_log_page()).
The helper function nvmet_is_pci_ctrl() is also introduced to check if
a target controller uses the PCI transport.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Allow a target driver to attach private data to a target controller by
adding the new field drvdata to struct nvmet_ctrl.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In order to have a logically better organized implementation of the
effects log page, split out reporting the supported admin commands from
nvmet_get_cmd_effects_nvm() into the new function
nvmet_get_cmd_effects_admin().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Make the function nvmet_update_cc() available to target drivers by
exporting it. To also facilitate the manipulation of the cc register
bits, move the inline helper functions nvmet_cc_en(), nvmet_cc_css(),
nvmet_cc_mps(), nvmet_cc_ams(), nvmet_cc_shn(), nvmet_cc_iosqes(), and
nvmet_cc_iocqes() from core.c to nvmet.h so that these functions can be
reused in target controller drivers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the new vendor_id and subsys_vendor_id configfs attribute for
target subsystems. These attributes are respectively reported as the
vid field and as the ssvid field of the identify controller data of
a target controllers using the subsystem for which these attributes
are set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Move the declaration of all helper functions converting NVMe command
opcodes and status codes into strings from drivers/nvme/host/nvme.h
into include/linux/nvme.h, together with the commands definitions.
This allows NVMe target drivers to call these functions without having
to include a host header file.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme_poll_cq() function currently returns the number of CQEs
found, However, only one caller, nvme_poll(), requires a boolean
value to check whether any CQE was completed. The other callers do
not use the return value at all.
To better reflect its usage, update the return type of nvme_poll_cq()
from int to bool.
Signed-off-by: Yongsoo Joo <ysjoo@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index csi is already used. This fix adds an
error check of the return value of xa_store() in nvme_get_effects_log().
Fixes: 1cf7a12e09aa ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since day-1 we are assigning the queue io_cpu very naively. We always
base the queue id (controller scope) and assign it its matching cpu
from the online mask. This works fine when the number of queues match
the number of cpu cores.
The problem starts when we have less queues than cpu cores. First, we
should take into account the mq_map and select a cpu within the cpus
that are assigned to this queue by the mq_map in order to minimize cross
numa cpu bouncing.
Second, even worse is that we don't take into account multiple
controllers may have assigned queues to a given cpu. As a result we may
simply compund more and more queues on the same set of cpus, which is
suboptimal.
We fix this by introducing global per-cpu counters that tracks the
number of queues assigned to each cpu, and we select the least used cpu
based on the mq_map and the per-cpu counters, and assign it as the queue
io_cpu.
The behavior for a single controller is slightly optimized by selecting
better cpu candidates by consulting with the mq_map, and multiple
controllers are spreading queues among cpu cores much better, resulting
in lower average cpu load, and less likelihood to hit hotspots.
Note that the accounting is not 100% perfect, but we don't need to be,
we're simply putting our best effort to select the best candidate cpu
core that we find at any given point.
Another byproduct is that every controller reset/reconnect may change
the queues io_cpu mapping, based on the current LRU accounting scheme.
Here is the baseline queue io_cpu assignment for 4 controllers, 2 queues
per controller, and 4 cpus on the host:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 1
nvme2: queue 0: using cpu 0
nvme2: queue 1: using cpu 1
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 1
nvme4: queue 0: using cpu 0
nvme4: queue 1: using cpu 1
And this is the fixed io_cpu assignment:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 2
nvme2: queue 0: using cpu 1
nvme2: queue 1: using cpu 3
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 2
nvme4: queue 0: using cpu 1
nvme4: queue 1: using cpu 3
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Suggested-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[fixed kbuild reported errors]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In all 3 cases (cpsw, cpsw-new, am65-cpsw) ALE is being configured in
VLAN-aware mode, while the comment states the opposite. Seems to be a typo
copy-pasted from one driver to another. Fix the commend which has been
puzzling some people (including me) for at least a decade.
Link: https://lore.kernel.org/linux-arm-kernel/4699400.vD3TdgH1nR@localhost/
Link: https://lore.kernel.org/netdev/0106ce78-c83f-4552-a234-1bf7a33f1ed1@kernel.org/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250109214219.123767-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tx_max_frame_size was added to struct ravb_hw_info, no value was
set in ravb_rzv2m_hw_info so the default value of zero was used.
The maximum MTU is set by subtracting from tx_max_frame_size to allow
space for headers and frame checksums. As ndev->max_mtu is unsigned,
this subtraction wraps around leading to a ridiculously large positive
value that is obviously incorrect.
Before tx_max_frame_size was introduced, the maximum MTU was based on
rx_max_frame_size. So, we can restore the correct maximum MTU by copying
the rx_max_frame_size value into tx_max_frame_size for RZ/V2M.
Fixes: 1d63864299ca ("net: ravb: Fix maximum TX frame size for GbEth devices")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20250109113706.1409149-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's
children (which happens later in the pci_unregister_driver()).
Due to this, when mana driver is configured as a module and rmmod is
invoked, following stack gets printed along with failure in rmmod command.
[ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 2399.318657] #PF: supervisor write access in kernel mode
[ 2399.319057] #PF: error_code(0x0002) - not-present page
[ 2399.319528] PGD 10eb68067 P4D 0
[ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI
[ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ #89
[ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
[ 2399.321892] RIP: 0010:down_write+0x1a/0x50
[ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c
[ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246
[ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000
[ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000
[ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098
[ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098
[ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000
[ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0
[ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 2399.329055] Call Trace:
[ 2399.329243] <TASK>
[ 2399.329379] ? show_regs+0x69/0x80
[ 2399.329602] ? __die+0x25/0x70
[ 2399.329856] ? page_fault_oops+0x271/0x550
[ 2399.330088] ? psi_group_change+0x217/0x470
[ 2399.330341] ? do_user_addr_fault+0x455/0x7b0
[ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0
[ 2399.331004] ? exc_page_fault+0x73/0x160
[ 2399.331275] ? asm_exc_page_fault+0x27/0x30
[ 2399.343324] ? down_write+0x1a/0x50
[ 2399.343631] simple_recursive_removal+0x4d/0x2c0
[ 2399.343977] ? __pfx_remove_one+0x10/0x10
[ 2399.344251] debugfs_remove+0x45/0x70
[ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana]
[ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana]
[ 2399.345229] mana_detach+0x2f1/0x4e0 [mana]
[ 2399.345466] ? ida_free+0x150/0x160
[ 2399.345718] ? __cond_resched+0x1a/0x50
[ 2399.345987] mana_remove+0xf4/0x1a0 [mana]
[ 2399.346243] mana_gd_remove+0x25/0x80 [mana]
[ 2399.346605] pci_device_remove+0x41/0xb0
[ 2399.346878] device_remove+0x46/0x70
[ 2399.347150] device_release_driver_internal+0x1e3/0x250
[ 2399.347831] ? klist_remove+0x81/0xe0
[ 2399.348377] driver_detach+0x4b/0xa0
[ 2399.348906] bus_remove_driver+0x83/0x100
[ 2399.349435] driver_unregister+0x31/0x60
[ 2399.349919] pci_unregister_driver+0x40/0x90
[ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana]
[ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320
[ 2399.351664] ? __fput+0x1a9/0x2d0
[ 2399.352200] __x64_sys_delete_module+0x12/0x20
[ 2399.352760] x64_sys_call+0x1e66/0x2140
[ 2399.353316] do_syscall_64+0x79/0x150
[ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230
[ 2399.354346] ? do_syscall_64+0x85/0x150
[ 2399.354816] ? irqentry_exit+0x1d/0x30
[ 2399.355287] ? exc_page_fault+0x7f/0x160
[ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2399.356302] RIP: 0033:0x7fe728d26aeb
[ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48
[ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb
[ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8
[ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950
[ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760
[ 2399.362688] </TASK>
Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device")
Cc: stable@vger.kernel.org
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1736398991-764-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows ipvlan to function properly on top of
bonds using active-backup mode.
This was implemented for macvlan in 2014 in commit
4c9912556867 ("macvlan: Support bonding events").
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Link: https://patch.msgid.link/20250109032819.326528-2-champetier.etienne@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues.
Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.")
Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove stmmac_lpi_entry_timer_config(), setting priv->eee_sw_timer_en
at the original call sites, and calling the appropriate
stmmac_xxx_hw_lpi_timer() function. No functional change.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEq-0002LQ-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide stmmac_disable_hw_lpi_timer() and stmmac_enable_hw_lpi_timer()
to control the hardware transmit LPI timer.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEl-0002LK-LA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_stop() will cause phylink to call the mac_link_down() operation
before phylink_stop() returns. As mac_link_down() will call
stmmac_eee_init(false), this will set both priv->eee_active and
priv->eee_enabled to be false, deleting the eee_ctrl_timer if
priv->eee_enabled was previously set.
As stmmac_release() calls phylink_stop() before checking whether
priv->eee_enabled is true, this is a condition that can never be
satisfied, and thus the code within this if() block will never be
executed. Remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEg-0002LE-HH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the initialisation of the EEE software timer to the probe function
as it is unnecessary to do this each time we enable software LPI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEb-0002L8-DJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->eee_enabled and priv->eee_active are both assigned using boolean
values. Type them as bool rather than int.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEW-0002L2-9w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since all call sites of stmmac_eee_init() assign priv->eee_active
immediately before, pass this state into stmmac_eee_init() and
assign priv->eee_active within this function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZER-0002Kv-5O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
