summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-09HID: intel-thc-hid: intel-quicki2c: Add PM implementationEven Xu
Implement THC QuickI2C driver power management callbacks. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driverEven Xu
Fully implement QuickI2C driver probe/remove callbacks, interrupt handler, integrate HIDI2C protocol, enumerate HID device and register HID device. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementationEven Xu
Intel QuickI2C driver uses THC hardware to accelerate HID over I2C (HIDI2C) protocol flow. This patch implements all data flows described in HID over I2C protocol SPEC by using THC hardware layer APIs. HID over I2C SPEC: https://learn.microsoft.com/en-us/previous-versions/windows/hardware/design/dn642101(v=vs.85) Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfacesEven Xu
Add functions to query QuickI2C ACPI DSM/DSD parameters and use these APIs to access all QuickI2C ACPI resources. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layerEven Xu
Add HID Low level driver callbacks and hid probe function to register QucikI2C as a HID driver, and external touch device as a HID device. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeletonEven Xu
Create intel-quicki2c folder and add Kconfig and Makefile for THC QuickI2C driver. Add basic device structure, definitions and probe/remove functions for QuickI2C driver. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Add PM implementationEven Xu
Implement THC QuickSPI driver power management callbacks. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Complete THC QuickSPI driverXinpeng Sun
Fully implement QuickSPI driver probe/remove callbacks, interrupt handler, integrate HIDSPI protocol, enumerate HID device and register HID device. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementationEven Xu
Intel QuickSPI driver uses THC hardware to accelerate HID over SPI (HIDSPI) protocol flow. This patch implements all data flows described in HID over SPI protocol SPEC by using THC hardware layer APIs. HID over SPI SPEC: https://www.microsoft.com/download/details.aspx?id=103325 Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Add THC QuickSPI ACPI interfacesEven Xu
Add functions to query QuickSPI ACPI DSD parameters and provide APIs for DSM method accessing. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Add THC QuickSPI driver hid layerEven Xu
Add HID Low level driver callbacks and hid probe function to register QucikSPI as a HID driver, and external touch device as a HID device. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-quickspi: Add THC QuickSPI driver skeletonXinpeng Sun
Create intel-quickspi folder and add Kconfig and Makefile for THC QuickSPI driver. Add basic device structure, definitions and probe/remove functions for QuickSPI driver. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC I2C config interfacesEven Xu
Add I2C bus related APIs to initialize I2C sub-system parameters, such as bus speed, slave address, address bit. As I2C sub-system hasn't auto register save and restore support, provide APIs to do it manually. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC SPI config interfacesXinpeng Sun
Add SPI bus related APIs to configure SPI operation parameters, such as port type, bus frequency, bus IO mode, read/write OPcode, and slave register addresses. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC interrupt handlerXinpeng Sun
Add common interrupt handler to clear interrupt status and return interrupt type to caller for future handling. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC LTR interfacesXinpeng Sun
THC supports LTR configuration and runtimely mode switching. There are two LTR modes: Active LTR and Low Power LTR. THC hardware layer provides APIs for LTR configuration and mode switching. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC DMA interfacesEven Xu
As THC PIO only has 64 bytes FIFO length, THC DMAs are introduced to send/receive large data packets. THC has three types of DMA channels: Read DMA channel (RxDMA), Write DMA channel (TxDMA) and Software DMA (SWDMA). In addition to basic DMA functions, THC RxDMA also includes an auto hardware sequence which can handle external touch device's interrupt automatically without software involved. THC RxDMA channel usually is used for handling touch input reports. THC TxDMA is very similar with general IO TxDMA, and usually is used for sending command/request to exteranl touch device. THC SWDMA can perform read, write followed by read operation according to different configurations. Unlike RxDMA triggered by bus activity, SWDMA can be triggered by SW driver at any time, for example: - Retrieving an input report without interrupt - Sending command followed by reading response THC DMA operation flow includes 4 steps: 1. Allocate DMA buffers 2. Configure opcode, fill PRD table with DMA buffers, enable DMA channel 3. Wait for completion, read out DMA buffers and update buffer pointers 4. Stop DMA and release DMA buffers THC Hardware layer driver provides APIs for all above DMA Steps. Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add APIs for interruptXinpeng Sun
Add THC interrupt operation interfaces, such as interrupt configure, global interrupt enable/disable, external touch device GPIO interrupt quiesce and unquiesce. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC PIO operation APIsXinpeng Sun
THC PIO (programmed I/O) operations are very similar with general SPI/I2C read/write operation to access external slave device on the bus through internal FIFO. THC PIO operations are split into 4 steps: 1. prepare: configure hardware with correct opcode, slave address, and fill the PIO FIFO 2. start: set start bit to issue a bus send/receive 3. wait: wait for bus sending/receiving completion 4. complete: check send/receive data in FIFO and return Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: intel-thc: Add THC registers definitionXinpeng Sun
Add THC Hardware register definitions and descriptions. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-thc-hid: Add basic THC driver skeletonXinpeng Sun
Create intel-thc-hid folder and add Kconfig and Makefile for THC drivers. Add basic THC device context structure, definitions and related initialization APIs for THC Hardware layer driver. Also initialize regmap struct for future THC registers access. Co-developed-by: Even Xu <even.xu@intel.com> Signed-off-by: Even Xu <even.xu@intel.com> Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com> Tested-by: Rui Zhang <rui1.zhang@intel.com> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-ish-hid: Remove unused ishtp_cl_get_tx_*Dr. David Alan Gilbert
ishtp_cl_get_tx_free_buffer_size() and ishtp_cl_get_tx_free_rings() were added in 2018 by commit 18c0b5467498 ("HID: intel_ish-hid: Enhance API to get ring buffer sizes") but have remained unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-ish-hid: Remove unused ishtp_cl_tx_emptyDr. David Alan Gilbert
ishtp_cl_tx_empty() was added in 2018 by commit a1c40ce62fd2 ("HID: intel-ish-hid: ishtp: add helper functions for client buffer operation") but has remained unused. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: intel-ish-hid: Remove unused ishtp_dev_state_strDr. David Alan Gilbert
ishtp_dev_state_str() was added in 2016 by commit 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer") but has never been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: core: Fix assumption that Resolution Multipliers must be in Logical ↵Alan Stern
Collections A report in 2019 by the syzbot fuzzer was found to be connected to two errors in the HID core associated with Resolution Multipliers. One of the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop in hid_apply_multiplier."), but the other has not been fixed. This error arises because hid_apply_multipler() assumes that every Resolution Multiplier control is contained in a Logical Collection, i.e., there's no way the routine can ever set multiplier_collection to NULL. This is in spite of the fact that the function starts with a big comment saying: * "The Resolution Multiplier control must be contained in the same * Logical Collection as the control(s) to which it is to be applied. ... * If no Logical Collection is * defined, the Resolution Multiplier is associated with all * controls in the report." * HID Usage Table, v1.12, Section 4.3.1, p30 * * Thus, search from the current collection upwards until we find a * logical collection... The comment and the code overlook the possibility that none of the collections found may be a Logical Collection. The fix is to set the multiplier_collection pointer to NULL if the collection found isn't a Logical Collection. Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Peter Hutterer <peter.hutterer@who-t.net> Fixes: 5a4abb36f312 ("HID: core: process the Resolution Multiplier") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: fix generic desktop D-Pad controlsTerry Tritton
The addition of the "System Do Not Disturb" event code caused the Generic Desktop D-Pad configuration to be skipped. This commit allows both to be configured without conflicting with each other. Fixes: 22d6d060ac77 ("input: Add support for "Do Not Disturb"") Signed-off-by: Terry Tritton <terry.tritton@linaro.org> Reviewed-by: Aseda Aboagye <aaboagye@chromium.org> Reviewed-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: lenovo: Support for ThinkPad-X12-TAB-1/2 Kbd Fn keysVishnu Sankar
Fn Keys like Mic mute, Power Modes/Airplane mode,Selective screenshot/Pickup Phone, KBD Backlight and star/Favourites is emitted as HID raw events in X12 Tab1 and Tab2. This support has been added. Thinkpad X12 TAB 2 and TAB 1 Folio keyboard's raw events will get detected as Fn keys with this patch. Default fn_lock state for these Keyboards are OFF. Other than these changes, we follow TP10UKBD's processes. Tested on X12 Tab 2. Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com> Signed-off-by: Vishnu Sankar <vsankar@lenovo.com> Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: multitouch: Add quirk for Hantick 5288 touchpadYouwan Wang
This device sometimes doesn't send touch release signals when moving from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck. Signed-off-by: Enze Xie <enze@nfschina.com> Signed-off-by: Youwan Wang <youwan@nfschina.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: nintendo: add support for md/gen 6B controllerRyan McClelland
The NSO MD/GEN 6B was a Japan-only controller released which has 6 buttons on the face of the controller. This adds support for this controller. It still enumerates just like the 3B controller, but will use extra bits in it's report for the 3 extra controllers. This also changes the events reported to match the letter on the controller for the NSO MD/GEN controller. The VID/PID it reports is the same as the 3B controller. This also removes a comment on the N64 Controllers which didn't mean anything. Signed-off-by: Ryan McClelland <rymcclel@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: wacom: Status luminance properties should set brightness of all LEDsJason Gerecke
The wacom driver has (deprecated) sysfs properties `status0_luminance` and `status1_luminance` that are used to control the low- and high- level brightness values (llv and hlv) of the status LEDs. These two properties had an effect on /all/ of the status LEDs. After our driver switched to exposing each status LED individually through the LED class, this behavior changed. These controls started having only a temporary effect on the currently-lit LED. If a trigger changed the current LED, the driver would switch the brightness back to the llv/hlv values stored per-LED. (The code's current behavior of updating the "global" e.g. `wacom->led.llv` values has essentially no effect because those values are only used at initialization time). This commit restores the original behavior by ensuring these properties update the per-LED brightness for all LEDs. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: wacom: Improve behavior of non-standard LED brightness valuesJason Gerecke
Assigning a non-standard brightness value to an LED can cause the value to slowly drift downward over time as the effects of integer division accumulate. Each time that an LED is triggered, a series of set and get calls occur. For example, if we assume a tablet with max_hlv = 100, then when brightness is set to "200" through sysfs, the hlv value written to hardware will be `200*100/255 = 78`. If the LED trigger is later activated, the hlv value will be used to determine the brightness: `78*255/100 = 198`. This lower brightness then used to set the brightness of the next LED. However, `198*100/255 = 77`, so the next LED ends up slightly dimmer. Each subsequent trigger activation will cause the brightness to continue drifting down until we reach a point where the result of integer divsion does not introduce any new error. This commit corrects the issue by being more careful about how we handle scaling between the two ranges (0..max_{h,l}lv) and (0..LED_FULL). Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint ↵Karol Przybylski
check syzbot has found a type mismatch between a USB pipe and the transfer endpoint, which is triggered by the hid-thrustmaster driver[1]. There is a number of similar, already fixed issues [2]. In this case as in others, implementing check for endpoint type fixes the issue. [1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470 [2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 Fixes: c49c33637802 ("HID: support for initialization of some Thrustmaster wheels") Reported-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com Tested-by: syzbot+040e8b3db6a96908d470@syzkaller.appspotmail.com Signed-off-by: Karol Przybylski <karprzy7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09HID: magicmouse: Update device name for Apple Magic Trackpad你 言言
Updated the device name for Apple Magic Trackpad USB-C when connected via Bluetooth. This change ensures the correct recognition of the 2024 USB-C trackpad and improves user experience. Signed-off-by: Qingyan Li <soragoto@soragoto.io> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-01-09Merge tag 'drm-xe-next-2025-01-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - OA new property: 'unblock after N reports' (Ashutosh) i915 display Changes: - UHBR rates for Thunderbolt (Kahola) Driver Changes: - IRQ related fixes and improvements (Ilia) - Revert some changes that break a mesa debug tool (John) - Fix migration issues (Nirmoy) - Enable GuC's WA_DUAL_QUEUE for newer platforms (Daniele) - Move shrink test out of xe_bo (Nirmoy) - SRIOV PF: Use correct function to check LMEM provisioning (Michal) - Fix a false-positive "Missing outer runtime PM protection" warning (Rodrigo) - Make GSCCS disabling message less alarming (Daniele) - Fix DG1 power gate sequence (Rodrigo) - Xe files fixes (Lucas) - Fix a potential TP_printk UAF (Thomas) - OA Fixes (Umesh) - Fix tlb invalidation when wedging (Lucas) - Documentation fix (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z31579j3V3XCPFaK@intel.com
2025-01-09Merge tag 'drm-misc-next-2025-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: - Clarify drm memory stats documentation Cross-subsystem Changes: Core Changes: - sched: Documentation fixes, Driver Changes: - amdgpu: Track BO memory stats at runtime - amdxdna: Various fixes - hisilicon: New HIBMC driver - bridges: - Provide default implementation of atomic_check for HDMI bridges - it605: HDCP improvements, MCCS Support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106-augmented-kakapo-of-action-0cf000@houat
2025-01-09Merge tag 'mediatek-drm-next-6.14' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.14 1. dp: Add sdp path reset 2. dp: Support flexible length of DP calibration data Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250104125538.111118-1-chunkuang.hu@kernel.org
2025-01-08Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-01-07 (ice, igc) For ice: Arkadiusz corrects mask value being used to determine DPLL phase range. Przemyslaw corrects frequency value for E823 devices. For igc: En-Wei Wu adds a check and, early, return for failed register read. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: return early when failing to read EECD register ice: fix incorrect PHY settings for 100 GB/s ice: fix max values for dpll pin phase adjust ==================== Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08Merge tag 'for-net-2025-01-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix failed to send func ctrl for MediaTek devices. - hci_sync: Fix not setting Random Address when required - MGMT: Fix Add Device to responding before completing - btnxpuart: Fix driver sending truncated data * tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices. Bluetooth: btnxpuart: Fix driver sending truncated data Bluetooth: MGMT: Fix Add Device to responding before completing Bluetooth: hci_sync: Fix not setting Random Address when required ==================== Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08drm/xe/slpc: Remove unnecessary force wakesVinay Belgaumkar
FORCEWAKE_ALL is not needed when we are trying to read the cur_freq, we just need to wake up the GT domain. We also do not need a force wake to for a H2G query to obtain min frequency. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241216194119.3017792-1-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-08drm/xe: Introduce the RPa informationRodrigo Vivi
RPa is the Achievable frequency, defined by PCODE at runtime based on multiple running conditions. v2: Remove RPA_MASK from i915 file Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220152936.623627-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-01-08Merge tag 'sunxi-clk-fixes-for-6.13' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull an Allwinner clk driver fix from Chen-Yu Tsai: Only one patch, accidentally left out of the 6.13 pull request. The patch enables automatic clk reparenting for MMC clocks on A100, thereby fixing MMC support. * tag 'sunxi-clk-fixes-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a100: enable MMC clock reparenting
2025-01-08Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four driver fixes in UFS, mostly to do with power management" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs scsi: ufs: qcom: Allow passing platform specific OF data scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
2025-01-08clk: mmp2: call pm_genpd_init() only after genpd.name is setLubomir Rintel
Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part(). Fixes: 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable@vger.kernel.org # v6.12+ Link: https://lore.kernel.org/r/20241231190336.423172-1-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-08cpuidle: riscv-sbi: fix device node release in early exit of ↵Javier Carrasco
for_each_possible_cpu The 'np' device_node is initialized via of_cpu_device_node_get(), which requires explicit calls to of_node_put() when it is no longer required to avoid leaking the resource. Instead of adding the missing calls to of_node_put() in all execution paths, use the cleanup attribute for 'np' by means of the __free() macro, which automatically calls of_node_put() when the variable goes out of scope. Given that 'np' is only used within the for_each_possible_cpu(), reduce its scope to release the nood after every iteration of the loop. Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver") Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20241116-cpuidle-riscv-sbi-cleanup-v3-1-a3a46372ce08@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2025-01-08net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen
Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: don't auto enable misc vectorJian Shen
Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan
This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is stale. To solve this problem, this patch implements .open() and .release() handler for debugfs file_operations. moving allocation buffer and execution of the cmd to the .open() handler and freeing in to the .release() handler. Allocate separate buffer for each reader and associate the buffer with the file pointer. When different user read processes no longer share the buffer, the stale data problem is fixed. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fix missing features due to dev->features configuration too earlyHao Lan
Currently, the netdev->features is configured in hns3_nic_set_features. As a result, __netdev_update_features considers that there is no feature difference, and the procedures of the real features are missing. Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 16:47:50 +0000