| Age | Commit message (Collapse) | Author |
|---|
|
The parameters set by the set_params call are only applied to the block
device in the start_dev call. So if a device has already been started, a
subsequently issued set_params on that device will not have the desired
effect, and should return an error. There is an existing check for this
- set_params fails on devices in the LIVE state. But this check is not
sufficient to cover the recovery case. In this case, the device will be
in the QUIESCED or FAIL_IO states, so set_params will succeed. But this
success is misleading, because the parameters will not be applied, since
the device has already been started (by a previous ublk server). The bit
UB_STATE_USED is set on completion of the start_dev; use it to detect
and fail set_params commands which arrive too late to be applied (after
start_dev).
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Fixes: 0aa73170eba5 ("ublk_drv: add SET_PARAMS/GET_PARAMS control command")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250304-set_params-v1-1-17b5e0887606@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)"
* tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
|
|
The fabric transports and also the PCI transport are not entering the
LIVE state from NEW or RESETTING. This makes the state machine more
restrictive and allows to catch not supported state transitions, e.g.
directly switching from RESETTING to LIVE.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
It's not possible to call nvme_state_ctrl_state with holding a spin
lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync
when fastfail is enabled.
Instead syncing the ASSOC_FLAG and state transitions using a lock, it's
possible to only rely on the state machine transitions. That means
nvme_fc_ctrl_connectivity_loss should unconditionally call
nvme_reset_ctrl which avoids the read race on the ctrl state variable.
Actually, it's not necessary to test in which state the ctrl is, the
reset work will only scheduled when the state machine is in LIVE state.
In nvme_fc_create_association, the LIVE state can only be entered if it
was previously CONNECTING. If this is not possible then the reset
handler got triggered. Thus just error out here.
Fixes: ee59e3820ca9 ("nvme-fc: do not ignore connectivity loss during connecting")
Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
iBoot on at least some firmwares/machines leaves ANS2 running, requiring
a wake command instead of a CPU boot (and if we reset ANS2 in that
state, everything breaks).
Only stop the CPU if RTKit was running, and only do the reset dance if
the CPU is stopped.
Normal shutdown handoff:
- RTKit not yet running
- CPU detected not running
- Reset
- CPU powerup
- RTKit boot wait
ANS2 left running/idle:
- RTKit not yet running
- CPU detected running
- RTKit wake message
Sleep/resume cycle:
- RTKit shutdown
- CPU stopped
- (sleep here)
- CPU detected not running
- Reset
- CPU powerup
- RTKit boot wait
Shutdown or device removal:
- RTKit shutdown
- CPU stopped
Therefore, the CPU running bit serves as a consistent flag of whether
the coprocessor is fully stopped or just idle.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Change the definition of the inline functions nvmet_cc_en(),
nvmet_cc_css(), nvmet_cc_mps(), nvmet_cc_ams(), nvmet_cc_shn(),
nvmet_cc_iosqes(), and nvmet_cc_iocqes() to use the enum difinitions in
include/linux/nvme.h instead of hardcoded values.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_validate_passthru_nsid() logs an err message whose format string is
split over 2 lines. There is a missing space between the two pieces,
resulting in log lines like "... does not match nsid (1)of namespace".
Add the missing space between ")" and "of". Also combine the format
string pieces onto a single line to make the err message easier to grep.
Fixes: e7d4b5493a2d ("nvme: factor out a nvme_validate_passthru_nsid helper")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
checks that the return value from recvmsg() is non-negative. If the
sender closes the TCP connection or sends fewer than 128 bytes, this
check will pass even though the full PDU wasn't received.
Ensure the full ICResp PDU is received by checking that recvmsg()
returns the expected 128 bytes.
Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
split the ICResp over multiple TCP frames. Without MSG_WAITALL,
recvmsg() could return prematurely with only part of the PDU.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When compiling with W=1, a warning result for the function
nvme_tcp_set_queue_io_cpu():
host/tcp.c:1578: warning: Function parameter or struct member 'queue'
not described in 'nvme_tcp_set_queue_io_cpu'
host/tcp.c:1578: warning: expecting prototype for Track the number of
queues assigned to each cpu using a global per(). Prototype was for
nvme_tcp_set_queue_io_cpu() instead
Avoid this warning by using the regular comment format for the function
nvme_tcp_set_queue_io_cpu() instead of the kdoc comment format.
Fixes: 32193789878c ("nvme-tcp: Fix I/O queue cpu spreading for multiple controllers")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The delayed work item function nvmet_pci_epf_poll_sqs_work() polls all
submission queues and keeps running in a loop as long as commands are
being submitted by the host. Depending on the preemption configuration
of the kernel, under heavy command workload, this function can thus run
for more than RCU_CPU_STALL_TIMEOUT seconds, leading to a RCU stall:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 5-....: (20998 ticks this GP) idle=4244/1/0x4000000000000000 softirq=301/301 fqs=5132
rcu: (t=21000 jiffies g=-443 q=12 ncpus=8)
CPU: 5 UID: 0 PID: 82 Comm: kworker/5:1 Not tainted 6.14.0-rc2 #1
Hardware name: Radxa ROCK 5B (DT)
Workqueue: events nvmet_pci_epf_poll_sqs_work [nvmet_pci_epf]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : dw_edma_device_tx_status+0xb8/0x130
lr : dw_edma_device_tx_status+0x9c/0x130
sp : ffff800080b5bbb0
x29: ffff800080b5bbb0 x28: ffff0331c5c78400 x27: ffff0331c1cd1960
x26: ffff0331c0e39010 x25: ffff0331c20e4000 x24: ffff0331c20e4a90
x23: 0000000000000000 x22: 0000000000000001 x21: 00000000005aca33
x20: ffff800080b5bc30 x19: ffff0331c123e370 x18: 000000000ab29e62
x17: ffffb2a878c9c118 x16: ffff0335bde82040 x15: 0000000000000000
x14: 000000000000017b x13: 00000000ee601780 x12: 0000000000000018
x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000040
x8 : 00000000ee601780 x7 : 0000000105c785c0 x6 : ffff0331c1027d80
x5 : 0000000001ee7ad6 x4 : ffff0335bdea16c0 x3 : ffff0331c123e438
x2 : 00000000005aca33 x1 : 0000000000000000 x0 : ffff0331c123e410
Call trace:
dw_edma_device_tx_status+0xb8/0x130 (P)
dma_sync_wait+0x60/0xbc
nvmet_pci_epf_dma_transfer+0x128/0x264 [nvmet_pci_epf]
nvmet_pci_epf_poll_sqs_work+0x2a0/0x2e0 [nvmet_pci_epf]
process_one_work+0x144/0x390
worker_thread+0x27c/0x458
kthread+0xe8/0x19c
ret_from_fork+0x10/0x20
The solution for this is simply to explicitly allow rescheduling using
cond_resched(). However, since doing so for every loop of
nvmet_pci_epf_poll_sqs_work() significantly degrades performance
(for 4K random reads using 4 I/O queues, the maximum IOPS goes down from
137 KIOPS to 110 KIOPS), call cond_resched() every second to avoid the
RCU stalls.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The function nvmet_pci_epf_poll_cc_work() will do nothing if there are
no changes to the controller configuration (CC) register. However, even
for such case, this function still calls nvmet_update_cc() and uselessly
writes the CSTS register. Avoid this by simply rescheduling the poll_cc
work if the CC register has not changed.
Also reschedule the poll_cc work if the function
nvmet_pci_epf_enable_ctrl() fails to allow the host the chance to try
again enabling the controller.
While at it, since there is no point in trying to handle the CC register
as quickly as possible, change the poll_cc work scheduling interval to
10 ms (from 5ms), to avoid excessive read accesses to that register.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The function nvmet_pci_epf_poll_cc_work() sets the NVME_CSTS_RDY bit of
the controller status register (CSTS) when nvmet_pci_epf_enable_ctrl()
returns success. However, since this function can be called several
times (e.g. if the host reboots), instead of setting the bit in
ctrl->csts, initialize this field to only have NVME_CSTS_RDY set.
Conversely, if nvmet_pci_epf_enable_ctrl() fails, make sure to clear all
bits from ctrl->csts.
To simplify nvmet_pci_epf_poll_cc_work(), initialize ctrl->csts to
NVME_CSTS_RDY directly inside nvmet_pci_epf_enable_ctrl() and clear this
field in that function as well in case of a failure. To be consistent,
move clearing the NVME_CSTS_RDY bit from ctrl->csts when the controller
is being disabled from nvmet_pci_epf_poll_cc_work() into
nvmet_pci_epf_disable_ctrl().
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The queue state checking in nvmet_rdma_recv_done is not in queue state
lock.Queue state can transfer to LIVE in cm establish handler between
state checking and state lock here, cause a silent drop of nvme connect
cmd.
Recheck queue state whether in LIVE state in state lock to prevent this
issue.
Signed-off-by: Ruozhu Li <david.li@jaguarmicro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled.
Fixes: 74d16965d7ac ("nvmet-loop: avoid using mutex in IO hotpath")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.
Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In order for two Acer FA100 SSDs to work in one PC (in the case of
myself, a Lenovo Legion T5 28IMB05), and not show one drive and not
the other, and sometimes mix up what drive shows up (randomly), these
two lines of code need to be added, and then both of the SSDs will
show up and not conflict when booting off of one of them. If you boot
up your computer with both SSDs installed without this patch, you may
also randomly get into a kernel panic (if the initrd is not set up) or
stuck in the initrd "/init" process, it is set up, however, if you do
apply this patch, there should not be problems with booting or seeing
both contents of the drive. Tested with the btrfs filesystem with a
RAID configuration of having the root drive '/' combined to make two
256GB Acer FA100 SSDs become 512GB in total storage.
Kernel Logs with patch applied (`dmesg -t | grep -i nvm`):
```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme0: Ignoring bogus Namespace Identifiers
nvme0n1: p1 p2
...
```
Kernel Logs with patch not applied (`dmesg -t | grep -i nvm`):
```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: globally duplicate IDs for nsid 1
nvme nvme1: VID:DID 1dbe:5216 model:Acer SSD FA100 256GB firmware:1.Z.J.2X
nvme0n1: p1 p2
...
```
Signed-off-by: Christopher Lentocha <christopherericlentocha@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into block-6.14
Pull MD fix from Song:
"This patch, by Bart Van Assche, fixes an error handling path for
md-linear."
* tag 'md-6.14-20250206' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: Fix linear_set_limits()
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- Connection fixes for fibre channel transport (Daniel)
- Endian fixes (Keith, Christoph)
- Cleanup fix for host memory buffer (Francis)
- Platform specific power quirks (Georg)
- Target memory leak (Sagi)
- Use appropriate controller state accessor (Daniel)"
* tag 'nvme-6.14-2025-01-31' of git://git.infradead.org/nvme:
nvme-fc: use ctrl state getter
nvme: make nvme_tls_attrs_group static
nvmet: add a missing endianess conversion in nvmet_execute_admin_connect
nvmet: the result field in nvmet_alloc_ctrl_args is little endian
nvmet: fix a memory leak in controller identify
nvme-fc: do not ignore connectivity loss during connecting
nvme: handle connectivity loss in nvme_set_queue_count
nvme-fc: go straight to connecting state when initializing
nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk
nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk
nvme-pci: remove redundant dma frees in hmb
nvmet: fix rw control endian access
|
|
My sparc64 defconfig build failed like this:
drivers/block/sunvdc.c: In function 'vdc_queue_drain':
drivers/block/sunvdc.c:1130:9: error: too many arguments to function 'blk_mq_unquiesce_queue'
1130 | blk_mq_unquiesce_queue(q, memflags);
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/block/sunvdc.c:10:
include/linux/blk-mq.h:895:6: note: declared here
895 | void blk_mq_unquiesce_queue(struct request_queue *q);
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/block/sunvdc.c:1131:9: error: too few arguments to function 'blk_mq_unfreeze_queue'
1131 | blk_mq_unfreeze_queue(q);
| ^~~~~~~~~~~~~~~~~~~~~
In file included from drivers/block/sunvdc.c:10:
include/linux/blk-mq.h:914:1: note: declared here
914 | blk_mq_unfreeze_queue(struct request_queue *q, unsigned int memflags)
| ^~~~~~~~~~~~~~~~~~~~~
Fixes: 1e1a9cecfab3 ("block: force noio scope in blk_mq_freeze_queue")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() call from linear_set_limits() because
there is no corresponding queue_limits_start_update() call.
This bug was discovered by annotating all mutex operations with clang
thread-safety attributes and by building the kernel with clang and
-Wthread-safety.
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Coly Li <colyli@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 127186cfb184 ("md: reintroduce md-linear")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250129225636.2667932-1-bvanassche@acm.org
Signed-off-by: Song Liu <song@kernel.org>
|
|
Do not access the state variable directly, instead use proper
synchronization so not stale data is read.
Fixes: e6e7f7ac03e4 ("nvme: ensure reset state check ordering")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
To suppress the compiler "warning: symbol 'nvme_tls_attrs_group' was not
declared. Should it be static?"
Fixes: 1e48b34c9bc79a ("nvme: split off TLS sysfs attributes into a separate group")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kato field is little endian on the wire, but native endian in
the in-core structure, add the missing byte swap.
Fixes: 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
So use the __le32 type for it.
Fixes: 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
LOOP_SET_STATUS{,64} can set a lot more flags than it is supposed to
clear (the LOOP_SET_STATUS_CLEARABLE_FLAGS vs
LOOP_SET_STATUS_SETTABLE_FLAGS defines should have been a hint..).
Fix this by only clearing the bits in LOOP_SET_STATUS_CLEARABLE_FLAGS.
Fixes: ae074d07a0e5 ("loop: move updating lo_flag s out of loop_set_status_from_info")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250127143045.538279-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex.
Cc: stable@vger.kernel.org # v6.12+
Fixes: 32a7627cf3a3 ("[PATCH] md: optimised resync using Bitmap based intent logging")
Reported-and-tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Closes: https://lore.kernel.org/linux-raid/ca3a91a2-50ae-4f68-b317-abd9889f3907@oracle.com/T/#m6e5086c95201135e4941fe38f9efa76daf9666c5
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250124092055.4050195-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Simply free an allocated buffer once we copied its content
to the request sgl.
kmemleak complaint:
unreferenced object 0xffff8cd40c388000 (size 4096):
comm "kworker/2:2H", pid 14739, jiffies 4401313113
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<ffffffff9e01087a>] kmemleak_alloc+0x4a/0x90
[<ffffffff9d30324a>] __kmalloc_cache_noprof+0x35a/0x420
[<ffffffffc180b0e2>] nvmet_execute_identify+0x912/0x9f0 [nvmet]
[<ffffffffc181a72c>] nvmet_tcp_try_recv_pdu+0x84c/0xc90 [nvmet_tcp]
[<ffffffffc181ac02>] nvmet_tcp_io_work+0x82/0x8b0 [nvmet_tcp]
[<ffffffff9cfa7158>] process_one_work+0x178/0x3e0
[<ffffffff9cfa8e9c>] worker_thread+0x2ec/0x420
[<ffffffff9cfb2140>] kthread+0xf0/0x120
[<ffffffff9cee36a4>] ret_from_fork+0x44/0x70
[<ffffffff9ce7fdda>] ret_from_fork_asm+0x1a/0x30
Fixes: 84909f7decbd ("nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When a connectivity loss occurs while nvme_fc_create_assocation is
being executed, it's possible that the ctrl ends up stuck in the LIVE
state:
1) nvme nvme10: NVME-FC{10}: create association : ...
2) nvme nvme10: NVME-FC{10}: controller connectivity lost.
Awaiting Reconnect
nvme nvme10: queue_size 128 > ctrl maxcmd 32, reducing to maxcmd
3) nvme nvme10: Could not set queue count (880)
nvme nvme10: Failed to configure AEN (cfg 900)
4) nvme nvme10: NVME-FC{10}: controller connect complete
5) nvme nvme10: failed nvme_keep_alive_end_io error=4
A connection attempt starts 1) and the ctrl is in state CONNECTING.
Shortly after the LLDD driver detects a connection lost event and calls
nvme_fc_ctrl_connectivity_loss 2). Because we are still in CONNECTING
state, this event is ignored.
nvme_fc_create_association continues to run in parallel and tries to
communicate with the controller and these commands will fail. Though
these errors are filtered out, e.g in 3) setting the I/O queues numbers
fails which leads to an early exit in nvme_fc_create_io_queues. Because
the number of IO queues is 0 at this point, there is nothing left in
nvme_fc_create_association which could detected the connection drop.
Thus the ctrl enters LIVE state 4).
Eventually the keep alive handler times out 5) but because nothing is
being done, the ctrl stays in LIVE state.
There is already the ASSOC_FAILED flag to track connectivity loss event
but this bit is set too late in the recovery code path. Move this into
the connectivity loss event handler and synchronize it with the state
change. This ensures that the ASSOC_FAILED flag is seen by
nvme_fc_create_io_queues and it does not enter the LIVE state after a
connectivity loss event. If the connectivity loss event happens after we
entered the LIVE state the normal error recovery path is executed.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the set feature attempts fails with any NVME status code set in
nvme_set_queue_count, the function still report success. Though the
numbers of queues set to 0. This is done to support controllers in
degraded state (the admin queue is still up and running but no IO
queues).
Though there is an exception. When nvme_set_features reports an host
path error, nvme_set_queue_count should propagate this error as the
connectivity is lost, which means also the admin queue is not working
anymore.
Fixes: 9a0be7abb62f ("nvme: refactor set_queue_count")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The initial controller initialization mimiks the reconnect loop
behavior by switching from NEW to RESETTING and then to CONNECTING.
The transition from NEW to CONNECTING is a valid transition, so there is
no point entering the RESETTING state. TCP and RDMA also transition
directly to CONNECTING state.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- newly added support for Intel Touch Host Controller (Even Xu, Xinpeng
Sun)
- hid-core fix for long-standing syzbot-reported cornercase of
Resolution Multiplier not being present in any of the Logical
Collections in the device HID report descriptor (Alan Stern)
- improvement of behavior for non-standard LED brightness values for
Wacom driver (Jason Gerecke)
- PCI Wacom device support (depends on Intel THC support) (Even Xu)
- SteelSeries Arctis 9 support (Christian Mayer)
- constification of 'struct bin_attribute' in various HID driver
(Thomas Weißschuh)
- other assorted code cleanups / fixes and device ID additions
* tag 'hid-for-linus-2025012001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (63 commits)
HID: hid-asus: Disable OOBE mode on the ProArt P16
HID: steelseries: remove unnecessary return
HID: steelseries: export model and manufacturer
HID: steelseries: export charging state for the SteelSeries Arctis 9 headset
HID: steelseries: add SteelSeries Arctis 9 support
HID: steelseries: preparation for adding SteelSeries Arctis 9 support
HID: intel-thc-hid: fix build errors in um mode
HID: intel-thc-hid: intel-quicki2c: fix potential memory corruption
HID: intel-thc-hid: intel-thc: Fix error code in thc_i2c_subip_init()
HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch
HID: uclogic: make const read-only array touch_ring_model_params_buf static
HID: hid-steam: Make sure rumble work is canceled on removal
HID: Wacom: Add PCI Wacom device support
HID: intel-thc-hid: intel-quicki2c: Add PM implementation
HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver
HID: intel-thc-hid: intel-quicki2c: Add HIDI2C protocol implementation
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver hid layer
HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton
HID: intel-thc-hid: intel-quickspi: Add PM implementation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for Intel Panther Lake processors in multiple
places, modify Intel thermal drivers to stop selecting the user space
thermal governor which is not necessary for them to work any more and
clean up the thermal core somewhat:
- Add support for Panther Lake processors in multiple places (Zhang
Rui, Srinivas Pandruvada)
- Remove explicit user_space governor selection from Intel thermal
drivers (Srinivas Pandruvada)
- Rename a few things and relocate a comment in the thermal subsystem
(Rafael Wysocki)"
* tag 'thermal-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Rename function argument related to trip crossing
thermal: gov_bang_bang: Relocate regulation logic description
thermal: core: Rename callback functions in two governors
thermal: intel: Fix compile issue when CONFIG_NET is not defined
thermal: intel: int340x: Panther Lake power floor and workload hint support
thermal: intel: int340x: Panther Lake DLVR support
thermal: intel: Remove explicit user_space governor selection
ACPI: DPTF: Support Panther Lake
thermal: intel: int340x: processor: Enable MMIO RAPL for Panther Lake
powercap: intel_rapl: Add support for Panther Lake platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant change here is replacing msleep() in
acpi_os_sleep() with usleep_range() to reduce spurious sleep time due
to timer inaccuracy which may spectacularly reduce the duration of
system suspend and resume transitions on some systems.
All of the other changes fall into the fixes and cleanups category
this time.
Specifics:
- Use usleep_range() instead of msleep() in acpi_os_sleep() to reduce
excessive delays due to timer inaccuracy, mostly affecting system
suspend and resume (Rafael Wysocki)
- Use str_enabled_disabled() string helpers in the ACPI tables
parsing code to make it easier to follow (Sunil V L)
- Update device properties parsing on systems using ACPI so that data
firmware nodes resulting from _DSD evaluation are treated as
available in firmware nodes walks (Sakari Ailus)
- Fix missing guid_t declaration in linux/prmt.h (Robert Richter)
- Update the GHES handling code to follow the global panic= policy
instead of overriding it by force-rebooting the system after a
fatal HW error has been reported (Borislav Petkov)
- Update messages printed by the ACPI battery driver to always refer
to driver extensions as "hooks" to avoid confusion with similar
functionality in the power supply subsystem in the future (Thomas
Weißschuh)
- Fix .probe() error path cleanup in the ACPI fan driver to avoid
memory leaks (Joe Hattori)
- Constify 'struct bin_attribute' in some places in the ACPI
subsystem and mark it as __ro_after_init in one place to prevent
binary blob attributes from being updated (Thomas Weißschuh)
- Add empty stubs for several ACPI-related symbols so that they can
be used when CONFIG_ACPI is unset and use them for removing
unnecessary conditional compilation from the ipu-bridge driver
(Ricardo Ribalda)"
* tag 'acpi-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
APEI: GHES: Have GHES honor the panic= setting
ACPI: PRM: Fix missing guid_t declaration in linux/prmt.h
ACPI: tables: Use string choice helpers
ACPI: property: Consider data nodes as being available
media: ipu-bridge: Remove unneeded conditional compilations
ACPI: bus: implement acpi_device_hid when !ACPI
ACPI: bus: implement for_each_acpi_consumer_dev when !ACPI
ACPI: header: implement acpi_device_handle when !ACPI
ACPI: bus: implement acpi_get_physical_device_location when !ACPI
ACPI: bus: implement for_each_acpi_dev_match when !ACPI
ACPI: bus: change the prototype for acpi_get_physical_device_location
ACPI: fan: cleanup resources in the error path of .probe()
ACPI: battery: Rename extensions to hook in messages
ACPI: OSL: Use usleep_range() in acpi_os_sleep()
ACPI: sysfs: Constify 'struct bin_attribute'
ACPI: BGRT: Constify 'struct bin_attribute'
ACPI: BGRT: Mark bin_attribute as __ro_after_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes here are cpufreq updates which are dominated
by amd-pstate driver changes, like in the previous cycle. Moreover,
changes related to amd-pstate are also the majority of cpupower
utility updates.
Included are some pieces of new hardware support, like the addition of
Clearwater Forest processors support to intel_idle, new cpufreq driver
for Airoha SoCs, and Apple cpufreq driver extensions to support more
SoCs. The intel_pstate driver is also extended to be able to support
new platforms by using ACPI CPPC to compute scaling factors between
HWP performance states and frequency.
The rest is mostly fixes and cleanups in assorted pieces of power
management code.
Specifics:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski)
- Extend the Apple cpufreq driver to support more SoCs (Hector
Martin, Nick Chan)
- Add new cpufreq driver for Airoha SoCs (Christian Marangi)
- Fix using cpufreq-dt as module (Andreas Kemnade)
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam)
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy)
- Fix an amd-pstate driver regression with preferred core rankings
not being used (Mario Limonciello)
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki)
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello)
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello)
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar)
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a
built-in scaling factor for Arrow Lake processors (Rafael Wysocki)
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN
for consistency with CPU offline (Christian Loehle)
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf)
- Allow configuring the system suspend-resume (DPM) watchdog to warn
earlier than panic (Douglas Anderson)
- Implement devm_device_init_wakeup() helper and introduce a device-
managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan)
- Remove direct inclusions of 'pm_wakeup.h' which should be only
included via 'device.h' (Wolfram Sang)
- Clean up two comments in the core system-wide PM code (Rafael
Wysocki, Randy Dunlap)
- Add Clearwater Forest processor support to the intel_idle cpuidle
driver (Artem Bityutskiy)
- Clean up the Exynos devfreq driver and devfreq core (Markus
Elfring, Jeongjun Park)
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong,
Joe Hattori)
- Implement dev_pm_opp_get_bw() (Neil Armstrong)
- Expose OPP reference counting helpers for Rust (Viresh Kumar)
- Fix TSC MHz calculation in cpupower (He Rongguang)
- Add install and uninstall options to bindings Makefile and add
header changes for cpufreq.h to SWIG bindings in cpupower (John B.
Wyatt IV)
- Add missing residency header changes in cpuidle.h to SWIG bindings
in cpupower (John B. Wyatt IV)
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian)
- Fix cross-compilation in cpupower Makefile (Peng Fan)
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai)
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello)"
* tag 'pm-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits)
PM / OPP: Add reference counting helpers for Rust implementation
PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq()
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
PM: sleep: convert comment from kernel-doc to plain comment
cpufreq: ACPI: Fix max-frequency computation
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
PM / devfreq: exynos: remove unused function parameter
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
...
|
|
Pull ipmi updates from Corey Minyard:
- I'm switching to a new email address, so update that
- Minor fixes for formats and return values and missing ifdefs
- A fix for some error handling that causes a loss of messages
* tag 'for-linus-6.14-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: ipmi: update my email address
ipmi: ssif_bmc: Fix new request loss when bmc ready for a response
ipmi: make ipmi_destroy_user() return void
char:ipmi: Fix a not-used variable on a non-ACPI system
char:ipmi: Fix the wrong format specifier
ipmi: ipmb: Add check devm_kasprintf() returned value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- list-based mechanisms for handling auto-detected and userspace
created clients are replaced with a flag-based approach. The
resulting code is much simpler as well as the locking.
- i2c clients now get a default debugfs dir managed by the I2C core.
Drivers don't have to maintain their own directory anymore.
Driver updates:
- xiic: atomic_transfer support
- imx-lpi2c: DMA and target mode support
- riic cleanups
- npcm: better timeout handling and more precise frequency setups
- davinci: remove unused platform_data
- at24: add new compatibles for variants from Giantec and Puya
Semiconductor (together with a new vendor prefix)"
* tag 'i2c-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: add kdoc for the new debugfs entry of clients
i2c: designware: Actually make use of the I2C_DW_COMMON and I2C_DW symbol namespaces
i2c: add core-managed per-client directory in debugfs
i2c: Force ELAN06FA touchpad I2C bus freq to 100KHz
i2c: riic: Add `riic_bus_barrier()` to check bus availability
i2c: riic: Use predefined macro and simplify clock tick calculation
i2c: riic: Mark riic_irqs array as const
i2c: riic: Make use of devres helper to request deasserted reset line
i2c: riic: Use GENMASK() macro for bitmask definitions
i2c: riic: Use BIT macro consistently
i2c: riic: Use local `dev` pointer in `dev_err_probe()`
i2c: riic: Use dev_err_probe in probe and riic_init_hw functions
i2c: riic: Introduce a separate variable for IRQ
i2c: amd756: Remove superfluous TODO
Revert "i2c: amd756: Fix endianness handling for word data"
i2c: i801: Add lis3lv02d for Dell Precision M6800
i2c: i801: Remove unnecessary PCI function call
i2c: core: Allocate temp client on the stack in i2c_detect
i2c: slave-eeprom: Constify 'struct bin_attribute'
i2c: imx-lpi2c: make controller available until the system enters suspend_noirq() and from resume_noirq().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time there are very little changes for pwm. There is nothing new,
just a few maintenance cleanups.
The contributors this time around were Krzysztof Kozlowski, Mingwei
Zheng, Philipp Stanner, and Stanislav Jakubek. Thanks!"
* tag 'pwm/for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Add check for clk_enable()
dt-bindings: pwm: Correct indentation and style in DTS example
pwm: stm32-lp: Add check for clk_enable()
dt-bindings: pwm: marvell,berlin-pwm: Convert from txt to yaml
dt-bindings: pwm: sprd,ums512-pwm: convert to YAML
pwm: Replace deprecated PCI functions
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- PMBus client driver for Intel CRPS185 power supply
- PMBus client driver for Texas Instruments TPS25990
Chip support added to existing drivers:
- pmbus/max15301: Add support for MAX15303
- pmbus/adm1275: Add adm1273 support
- lm75: Add NXP P3T1755 support; with it, add I3C support to the
driver
- asus-ec-sensors: Add TUF GAMING X670E PLUS
Other notable changes:
- nct6683: Add customer IDs for several MSI and ASRock boards
- tmp108: Add regulator support
- Improve write protect support in PMBus core
- pmbus/dps920ab: Add ability to instantiate through i2c
- The hwmon core now accepts NULL as device name parameter to
[devm_]hwmon_device_register_with_info ans uses the parent device
name as fallback in that case
- The PMBus core now provides the PMBUs revision in a debugfs file
- asus-ec-sensors: Support for optional CPU fan on AMD 600
motherboards
- raspberrypi: Add PM suspend/resume support
- dell-smm: Enable manual fan control support on Dell XPS 9370
- pwm-fan: Default to maximum cooling level if provided
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (44 commits)
hwmon: pmbus: dps920ab: Add ability to instantiate through i2c
hwmon: (pwm-fan) Default to the Maximum cooling level if provided
hwmon: (asus_atk0110) Use str_enabled_disabled() and str_enable_disable() helpers
hwmon: Fix help text for aspeed-g6-pwm-tach
hwmon: (dell-smm) Add Dell XPS 9370 to fan control whitelist
hwmon: (acpi_power_meter) Fix update the power trip points on failure
hwmon: (acpi_power_meter) Fix uninitialized variables
hwmon: (core) Use device name as a fallback in devm_hwmon_device_register_with_info
hwmon: (pmbus/max15301) Add support for MAX15303
hwmon: (pmbus/adm1275) add adm1273 support
dt-bindings: hwmon: adm1275: add adm1273
hwmon: (nct6683) Add another customer ID for MSI
hwmon: (pwm-fan): Make use of device properties everywhere
hwmon: (lm75) add I3C support for P3T1755
hwmon: (lm75) separate probe into common and I2C parts
hwmon: (lm75) Remove superfluous 'client' member from private struct
hwmon: (lm75) simplify regulator handling
hwmon: (lm75) simplify lm75_write_config()
hwmon: (lm75) Hide register size differences in regmap access functions
hwmon: (pmbus/crps) Add Intel CRPS185 power supply
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Allow struct bin_attribute instances to be placed in read-only memory
for enhanced protection
- Fix a memory leak in the cht-wcove driver by using
devm_led_classdev_register()
- Fix an OF node reference leak in the netxbig driver
- Ensure PWM is disabled properly in pwm-multicolor suspend
- Add support for Texas Instruments LP8864, LP8864S, LP8866
LED-backlight drivers
- Add support for STMicroelectronics's LED1202 12-channel LED driver
- Convert LP8860 bindings to YAML format
- Add bindings for the TI LP8864/LP8866 LED drivers
- Add LED1202 LED controller bindings
- Fix path to color definitions in leds-class-multicolor.yaml
- Add pm660l compatible to qcom,spmi-flash-led bindings
- Extend cznic,turris-omnia-leds binding with interrupts property
- Add documentation for the STMicroelectronics LED1202 driver
- Add entry for AAEON UP board FPGA drivers in MAINTAINERS
- Fix a wrong format specifier in the ledtrig-activity driver
- Fix a bug in the lp8860 driver where only half of the EEPROM was
written
* tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: triggers: Constify 'struct bin_attribute'
leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak
leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights
dt-bindings: leds: Convert LP8860 into YAML format
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
leds: pwm-multicolor: Disable PWM when going to suspend
leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata()
turris-omnia-mcu-interface.h: Move macro definitions outside of enums
MAINTAINERS: Add entry for AAEON UP board FPGA drivers
leds: Add AAEON UP board LED driver
leds: trigger: netdev: Check offload ability on interface up
leds: turris-omnia: Use uppercase first letter in all comments
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
leds: turris-omnia: Document driver private structures
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is a fairly quiet release for the most part, though we do have
one really nice improvement in the spi-mem framework which will
improve performance for flash devices especially when built on by
changes in the MTD subsystem which are also due to be sent this merge
window.
There's also been some substantial work on some of the drivers,
highlights include:
- Support for per-operation bus frequency in the spi-mem framework,
meaning speeds are no longer limited by the slowest operation
- ACPI support and improved power management for Rockchip SFC
controllers
- Support for Atmel SAM7G5 QuadSPI and KEBA SPI controllers"
* tag 'spi-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (49 commits)
spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper
spi: ti-qspi: Use syscon_regmap_lookup_by_phandle_args
spi: amd: Fix -Wuninitialized in amd_spi_exec_mem_op()
spi: spi-mem: Estimate the time taken by operations
spi: spi-mem: Create macros for DTR operation
spi: spi-mem: Reorder spi-mem macro assignments
spi: zynqmp-gqspi: Support per spi-mem operation frequency switches
spi: zynq-qspi: Support per spi-mem operation frequency switches
spi: spi-ti-qspi: Support per spi-mem operation frequency switches
spi: spi-sn-f-ospi: Support per spi-mem operation frequency switches
spi: rockchip-sfc: Support per spi-mem operation frequency switches
spi: nxp-fspi: Support per spi-mem operation frequency switches
spi: mxic: Support per spi-mem operation frequency switches
spi: mt65xx: Support per spi-mem operation frequency switches
spi: microchip-core-qspi: Support per spi-mem operation frequency switches
spi: fsl-qspi: Support per spi-mem operation frequency switches
spi: dw: Support per spi-mem operation frequency switches
spi: cadence-qspi: Support per spi-mem operation frequency switches
spi: amlogic-spifc-a1: Support per spi-mem operation frequency switches
spi: amd: Drop redundant check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a very quiet release, aside from some smaller improvements we
have:
- Support for power budgeting on regulators, initially targeted at
some still in review support for PSE controllers but generally
useful
- Support for error interrupts from ROHM BD96801 devices
- Support for NXP PCA9452"
* tag 'regulator-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Add regulator-power-budget-milliwatt property
regulator: Add support for power budget
regulator: core: Resolve supply using of_node from regulator_config
regulator: of: Implement the unwind path of of_regulator_match()
regulator: tps65219: Remove debugging helper function
regulator: tps65219: Remove MODULE_ALIAS
regulator: tps65219: Update driver name
regulator: tps65219: Use dev_err_probe() instead of dev_err()
regulator: dt-bindings: mt6315: Drop regulator-compatible property
regulator: pca9450: Add PMIC pca9452 support
regulator: dt-bindings: pca9450: Add pca9452 support
regulator: pca9450: Use dev_err_probe() to simplify code
regulator: pca9450: add enable_value for all bucks
regulator: bd96801: Add ERRB IRQ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"We added support for another Qualcomm WCN model and a FIXME comment
that explains why we still need to keep a GPIO workaround for now
despite having merged a set of changes to the PCI code that seemingly
fixed the underlying problem:
- support a new model in the qcom-wcn pwrseq driver
- explain the need to keep the WLAN_EN GPIO workaround for now with a
FIXME comment"
* tag 'pwrseq-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: explain why we need the WLAN_EN GPIO hack
power: sequencing: qcom-wcn: add support for the WCN6750 PMU
|
