summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-01-15drm/i915: Remove chatty execbuf failure message.Eric Anholt
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle) Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15drm/i915: remove loop in Ironlake interrupt handlerZou Nan hai
On Ironlake, there is an interrupt master control bit. With the bit disabled before clearing IIR, we do not need to handle extra interrupt in a loop. This patch removes the loop in Ironlake interrupt handler. It fixed irq lost issue on some Ironlake platforms. Cc: Stable Team <stable@kernel.org> Signed-off-by: Zou Nan hai <Nanhai.zou@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15HID: hid-debug.c: make local symbols staticH Hartley Sweeten
hid-debug.c: make local symbols static The symbols hid_resolv_event and hid_dump_input_mapping are only used locally in this file. Make them static to prevent the following sparse warnings: warning: symbol 'hid_resolv_event' was not declared. Should it be static? warning: symbol 'hid_dump_input_mapping' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-15amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rateRoel Kluin
Add a missing iterator variable thus fixing the conditional of the for-loop in amd64_get_scrub_rate(). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-01-15Merge remote branch 'korg/drm-radeon-testing' into drm-linusDave Airlie
* korg/drm-radeon-testing: drm/radeon/kms: Use radeon_agp_disable when disabling AGP drm/radeon/kms: Disable AGP is aperture size < 32M drm/radeon/kms: Fix r600 blit cleanup path drm/radeon/kms: Do not unpin buffer in fb destruction drm/radeon/kms: fix displayport->dvi connector DDC.
2010-01-15drm: EDID accept separate sync video modeJerome Glisse
X is accepting such video mode, do the same. Pointed out by Joshua Roys on IRC. Fix https://bugzilla.redhat.com/show_bug.cgi?id=540024 [fix printf to use composite not integrated :- airlied] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-15Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linusDave Airlie
* 'nouveau/for-airlied' of ../drm-nouveau-next: (44 commits) drm/nouveau: check pushbuffer bounds in ioctl drm/nouveau: reserve VGA area for the moment drm/nouveau: Unset the EDID connector property when the EDID block goes away. drm/nouveau: Fallback to analog load detection when the EDID block is invalid. drm/nouveau: fix edid memleak in nouveau_connector drm/nouveau: Break some long lines. drm/nouveau: add NV18 device id to call_lvds_manufacturer_script drm/nv50: Fix typo in PGRAPH initialisation. drm/nouveau: less magic DCB 1.5 parsing drm/nouveau: assume no nv04 board has a DCB table drm/nouveau: remove PRIV0 check in nouveau_mem_close() drm/nouveau: wait on fence after bo move if validating for another channel drm/nouveau: trust init table registers are safe drm/nv50: wait for pgraph to idle before unloading the context
2010-01-15powerpc/hvc: Driver build breaks with !HVC_CONSOLEKamalesh Babulal
Hi Stephen, next-20090925 randconfig build breaks on hvcs driver on powerpc, with HVC_CONSOLE=n. ERROR: ".hvc_put_chars" [drivers/char/hvcs.ko] undefined! ERROR: ".hvc_get_chars" [drivers/char/hvcs.ko] undefined! adding the dependency of HVC_CONSOLE helped Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15serial/pmac_zilog: Workaround problem due to interrupt on closed portBenjamin Herrenschmidt
It seems that in qemu, we can see an interrupt in R3 despite the fact that it's masked in W1. The chip doesn't actually issue an interrupt, but we can "see" it when taking an interrupt for the other channel. This may be a qemu bug ... or not, so let's be safe and avoid calling into the UART layer when that happens which woulc cause a crash. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rob Landley <rob@landley.net>
2010-01-15powerpc/macintosh: Make Open Firmware device id constantMárton Németh
The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15drm/nouveau: check pushbuffer bounds in ioctlLuca Barbieri
Currently there is no check that the pushbuffer request bounds are inside the TTM BO. This allows to instruct the kernel to do relocations on user-selected addresses, since the relocation bounds checking relies on the request bounds. This can oops the kernel accidentally and is easily exploitable. This patch adds bound checking and alignment checking for ->offset and ->nr_dwords. It also makes some variables unsigned, which should have no effect, but prevents possible bounds checking problems. Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.Markus Pietrek
The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF ports. If an incorrect size is used, the serial core will enforce an early shutdown on the port, especially with baudrates < 9600. Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15drm/nouveau: reserve VGA area for the momentBen Skeggs
This is to prevent things such as GART tables and other important GPU structures being allocated there before we take over fbcon ourselves. This is more of a workaround for the moment, a better solution will require some more invasive changes, but it'll be done at some point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15drm/nouveau: Unset the EDID connector property when the EDID block goes away.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15drm/nouveau: Fallback to analog load detection when the EDID block is invalid.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15drm/nouveau: fix edid memleak in nouveau_connectorXavier Chantry
This was spotted by kmemleak. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15drm/nouveau: Break some long lines.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15drm/nouveau: add NV18 device id to call_lvds_manufacturer_scriptAndrea Tacconi
This fixes imac black screen (NV18 card) Signed-off-by: Andrea Tacconi <tacconet@libero.it> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14iwmc3200wifi: Add UMAC wifi headers to the pmkid commandSamuel Ortiz
Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] tape_char: add missing compat_ptr conversion [S390] zcrypt: add sanity check before copy_from_user() [S390] unwire sys_recvmmsg again [S390] con3215: remove empty ioctl function [S390] dasd: add proper compat pointer conversion for symmetrix ioctl [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls [S390] bug: implement arch specific __WARN macro [S390] Move __cpu_logical_map to smp.c [S390] tape_block: remove ioctl function [S390] smp: remove volatile type quilifier from __cpu_logical_map [S390] smp: setup smp_processor_id early [S390] use helpers for rlimits [S390] fs3270: add missing compat ptr conversion [S390] vmcp: add missing compat ptr conversion [S390] cio: add missing compat ptr conversion [S390] dasd: add missing compat ptr conversion [S390] remove superfluous TIF_USEDFPU bit [S390] duplicate SIGTRAP on signal delivery. [S390] clear TIF_SINGLE_STEP for new process. [S390] fix loading of PER control registers for utrace.
2010-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n ipv6: skb_dst() can be NULL in ipv6_hop_jumbo(). tg3: Update copyright and driver version tg3: Disable 5717 serdes and B0 support tg3: Add reliable serdes detection for 5717 A0 tg3: Fix std rx prod ring handling tg3: Fix std prod ring nicaddr for 5787 and 57765 sfc: Fix conditions for MDIO self-test sfc: Fix polling for slow MCDI operations e1000e: workaround link issues on busy hub in half duplex on 82577/82578 e1000e: MDIO slow mode should always be done for 82577 ixgbe: update copyright dates ixgbe: Do not attempt to perform interrupts in netpoll when down cfg80211: fix refcount imbalance when wext is disabled mac80211: fix queue selection for data frames on monitor interfaces iwlwifi: silence buffer overflow warning iwlwifi: disable tx on beacon update notification iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr mac80211: fix endian error mac80211: add missing sanity checks for action frames ...
2010-01-14drm/nv50: Fix typo in PGRAPH initialisation.Marcin Kościelnicki
This enables streamout functionality. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nouveau: less magic DCB 1.5 parsingBen Skeggs
This in the very least matches the parsing of all the previously known entries, and hopefully (at least closer to) correct for any we haven't seen yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nouveau: assume no nv04 board has a DCB tableBen Skeggs
There's a report of a TNT2 where the DCB table pointer is *not* NULL (it contains a part of a VBIOS data string), and we assume this means a DCB table is present, causing all kinds of hilarity. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nouveau: remove PRIV0 check in nouveau_mem_close()Ben Skeggs
We don't setup PRIV0 anymore, so this is unnecessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nouveau: wait on fence after bo move if validating for another channelBen Skeggs
Not an ideal solution, but it'll do for the moment for correctness. We need to come up with a nicer way to manage inter-channel sync, the hw is unfortunately a little lacking in this area. Should fix some resume corruption, as well as corruption that may be seen while under memory pressure. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nouveau: trust init table registers are safeBen Skeggs
Apparently the original reason for checking this was there were known register accesses that caused hangs on some chipsets. This was more than likely because of incorrect parsing of previous opcodes, and I hardly think aborting a script half way through is going to be any better (in fact, we have had bug reports where this has been the cause of s/r failures among other things). This patch (which has been in Fedora 12 for a long time now) removes all checking for known register ranges, and just leaves the check to ensure the access is within the mapped aperture to avoid an oops. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/nv50: wait for pgraph to idle before unloading the contextMaarten Maathuis
This should fix the problem with gpu hangs people have had when closing channels. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-14drm/ttm: Make sure system buffer objects has offset == 0.Thomas Hellstrom
This is a convention that the vmwgfx driver has come to rely on. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Implement basic pm operations.Thomas Hellstrom
Currently we really only support S3, since the device doesn't support saving of the 3D state. On S3/S4, move all buffer objects to swappable memory and take down GMR bindings. We need to do that from a PM notifier since we can't do persistant memory allocations from the standard PM callbacks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/ttm: Export symbols needed for vmwgfx suspend / resume operations.Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Implement a swap_notify callback.Thomas Hellstrom
Unbind GMR bindings on the buffer about to be swapped out. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/ttm: Add a swap_notify callback.Thomas Hellstrom
This is needed for a bugfix in the vmwgfx driver. Drivers may have GPU bindings on buffers that core TTM is not aware of, and TTM may view those buffers as ordinary system memory buffers. Add a notifier to such drivers when TTM is about to move the buffer contents out to swappable memory. The driver must then release any private GPU bindings on those buffers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Use bo_driver::move_notify to unbind GMRs.Thomas Hellstrom
This was previously done explicitly for overlay- and fb buffers. Now it's done for any buffer leaving the SYSTEM memory region. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Make fence sequences continous across a VT switch.Thomas Hellstrom
A vt switch in stealth mode would take down the FIFO, and re- initialize fence sequence numbers. This patch saves the current state of the fence sequence when the FIFO is disabled. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Fix an error path causing an oops.Thomas Hellstrom
An error happening before the snooper.image member had been set up would cause a kfree of an arbitrary pointer. Set up the snooper.image member early. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/vmwgfx: Don't promote updates from GMR-backed scanouts to fullscreen.Thomas Hellstrom
That's unnecessary since partial screen updates from GMRs are fast. Also fix cliprect pointer dereferencing Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/radeon/kms: Use radeon_agp_disable when disabling AGPJerome Glisse
Use same common function to disable agp so we replace the GART callback by the proper one when we do so. This fix oops if radeon_agp_init report failure. This patch also move radeon_agp_init out of *_mc_init for r600 & rv770 so that we can have a similar behavior than for previous hw, ie if agp_init fails it will fallback to GPU GART and disable AGP. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/radeon/kms: Disable AGP is aperture size < 32MJerome Glisse
radeon KMS need a GART of at least 32M to properly work. This patch check the AGP aperture size and disable if it's less than 32M. Note than unlike non KMS path we don't staticaly allocate AGP memory so we are not wasting memory not used by graphic processing. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/radeon/kms: Fix r600 blit cleanup pathJerome Glisse
r600 blit cleanup path need to check if a bo was allocated before trying to free or unpin it. This patch add this check and avoid oops when the initialization on r6xx or r7xx hw fails. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/radeon/kms: Do not unpin buffer in fb destructionJerome Glisse
It's not necessary to unpin buffer in fb destruction. pin/unpin need to be balanced and we don't pin in fb creation. We pin when an fb is associated to a crtc and unpin when the fb is disassociated from the crtc. Note: Maybe we should take reference on fb in set_base callback so fb doesn't disappear until it's unbind from ctrc. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14drm/radeon/kms: fix displayport->dvi connector DDC.Dave Airlie
It appears that attempting AUXCH DDC breaks the subsequent attempt to do DDC over the i2c lines, so use the sink type to determine if we should be doing AUXCH or i2c DDC. This fixes my DVI monitor plugged into DP->DVI convertor. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-13tg3: Update copyright and driver versionMatt Carlson
This patch updates the copyright notice for 2010 and updates the version number to 3.106. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Disable 5717 serdes and B0 supportMatt Carlson
The B0 revision of the 5717 will not get enough testing by the time 2.6.33 ships. Since the kernel is already at RC3, serdes support will require too many patches to fix. For these reasons, this patch disables 5717 serdes support and will refuse to attach to all 5717 devices that are later than an A0 revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Add reliable serdes detection for 5717 A0Matt Carlson
The serdes status bit does not work as intended for the 5717 A0. This patch implements an alternative detection scheme that will only be valid for A0 revisions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Fix std rx prod ring handlingMatt Carlson
There are some tg3 devices that require the driver to post new rx buffers in smaller increments. Commit 4361935afe3abc3e5a93006b99197fac1fabbd50, "tg3: Consider rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx producer ring updates, but it does not make any special considerations for the above-mentioned devices. For those devices, it is possible for the driver to hit the special case path, which updates the hardware mailbox register but skips updating the shadow software mailbox member. If the special case path represents the final mailbox update for this ISR iteration, the hardware and software mailbox values will be out of sync. Ultimately, this will cause the driver to use a stale mailbox value on the next iteration, which will appear to the hardware as a large rx buffer update. Bad things ensue. The fix is to update the software shadow mailbox member when the special case path is taken. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13tg3: Fix std prod ring nicaddr for 5787 and 57765Matt Carlson
Commit 87668d352aa8d135bd695a050f18bbfc7b50b506, titled "tg3: Don't touch RCB nic addresses", tried to avoid assigning the nic address of the standard producer ring. Unfortunately, the default nic address is not correct for the 5787, the 5755M, or the 57765. This patch reenables the old behavior and opts out of the assignment only for the 5717. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Tested-by: Chow Loong Jin <hyperair@ubuntu.com> Tested-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13sfc: Fix conditions for MDIO self-testBen Hutchings
The MDIO self-test should not be run on boards without an MDIO PHY, such as SFN5122F-R3 and later revisions. It should also not try to address a specific MMD in an MDIO clause 22 PHY. Check the mode_support field to decide which mode to use, if any. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13sfc: Fix polling for slow MCDI operationsBen Hutchings
When the interface is down and we are using polled mode for MCDI operations, we busy-wait for completion for approximately 1 jiffy using udelay() and then back off to schedule(). But the completion will not wake the task, since we are using polled mode! We must use schedule_timeout_uninterruptible() instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13e1000e: workaround link issues on busy hub in half duplex on 82577/82578Bruce Allan
This patch removes a delay in hardware after every received packet allowing more time for transmitted packets to go out in between received packets in half duplex. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 03:12:01 +0000