| Age | Commit message (Collapse) | Author |
|---|
|
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes that have come in since
the merge window, nothing too major here but all good to have"
* tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-dspi: fix wrong pointer in suspend/resume
spi: bcm2835: fix gpio cs level inversion
spi: imx: fix runtime pm support for !CONFIG_PM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"An addition to MAINTAINERS plus a fix for a nasty bootstrapping
problem which caused problems when we need to read the voltage of a
regulator that is not yet available during initialization, we were not
correctly distinguishing between this case and the case where a
regulator is put into a bypass mode"
* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: defer probe when trying to get voltage from unresolved supply
MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix ACS regression that broke device pass-through (Rajat Jain)
- Revert DesignWare ATU memory resource to use last entry to fix
Tegra194 regression (Rob Herring)
- Remove duplicate mvebu resource requests to fix regression on Turris
Omnia (Rob Herring)
* tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: mvebu: Fix duplicate resource requests
PCI: dwc: Restore ATU memory resource setup to use last entry
PCI: Always enable ACS even if no ACS Capability
|
|
Check for corner case of port_init failure before using
the port_info pointer.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201104195606.61184-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In gpiochip_setup_dev() the call to gpiolib_cdev_register() indirectly
calls device_add(). This is still required for the sysfs even when
CONFIG_GPIO_CDEV is not selected in the build.
Replace the stubbed functions in gpiolib-cdev.h with macros in gpiolib.c
that perform the required device_add() and device_del() when
CONFIG_GPIO_CDEV is not selected.
Fixes: d143493c01b7 (gpiolib: make cdev a build option)
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Some gpio pin at aspeed soc is input only and the prefix name of these
pin is "GPI" only.
This patch fine-tune the condition of GPIO check from "GPIO" to "GPI"
and it will fix the usage error of banks D and E in the AST2400/AST2500
and banks T and U in the AST2600.
Fixes: 4d3d0e4272d8 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for 5.10:
- revert a nvme_queue size optimization (Keith Bush)
- fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"
* tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme:
nvme-tcp: avoid repeated request completion
nvme-rdma: avoid repeated request completion
nvme-tcp: avoid race between time out and tear down
nvme-rdma: avoid race between time out and tear down
nvme: introduce nvme_sync_io_queues
Revert "nvme-pci: remove last_sq_tail"
|
|
If scaling matrix control is present, VPU should not use default matrix.
Fix that.
Fixes: b3a23db0e2f8 ("media: cedrus: Use H264_SCALING_MATRIX only when required")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix build warnings when CONFIG_PM is not set/enabled:
../drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: 'mmpcam_runtime_suspend' defined but not used [-Wunused-function]
324 | static int mmpcam_runtime_suspend(struct device *dev)
../drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: 'mmpcam_runtime_resume' defined but not used [-Wunused-function]
310 | static int mmpcam_runtime_resume(struct device *dev)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The addition of MT8183 support added a dependency on the SCP remoteproc
module. However the initial patch used the "select" Kconfig directive,
which may result in the SCP module to not be compiled if remoteproc was
disabled. In such a case, mtk-vcodec would try to link against
non-existent SCP symbols. "select" was clearly misused here as explained
in kconfig-language.txt.
Replace this by a "depends" directive on at least one of the VPU and
SCP modules, to allow the driver to be compiled as long as one of these
is enabled, and adapt the code to support this new scenario.
Also adapt the Kconfig text to explain the extra requirements for MT8173
and MT8183.
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
mtk-vcodec supports two kinds of firmware, VPU and SCP. Both were
supported from the same source files, but this is clearly unclean and
makes it more difficult to disable support for one or the other.
Move these implementations into their own file, after adding the
necessary private interfaces.
[hverkuil: smatch fix: mtk_vcodec_fw_vpu_init() error: uninitialized symbol 'rst_id'.]
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556ad4e0 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
* pm-cpufreq:
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
* pm-cpuidle:
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
* pm-opp:
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
* powercap:
powercap/intel_rapl: remove unneeded semicolon
|
|
Only USB4 lane 0 adapter has the USB4 port capability for wakes so only
program wakes on such adapters.
Fixes: b2911a593a70 ("thunderbolt: Enable wakes from system suspend")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Some calls in the debugfs interface are made to the linux/uaccess.h header,
but the header is not referenced. So, for x86_64 architectures, this
dependency seems to be pulled in elsewhere, which leads to a successful
compilation. However, on arm/arm64 architectures, it was found to error out
on implicit declarations.
This change fixes the implicit declaration error by adding the
linux/uaccess.h header.
Fixes: 54e418106c76 ("thunderbolt: Add debugfs interface")
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The svc->key field is not released as it should be if ida_simple_get()
fails so fix that.
Fixes: 9aabb68568b4 ("thunderbolt: Fix to check return value of ida_simple_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
It is useful for debugging to have the error message printed
when regmap initialisation fails. Add it to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201009180856.4738-2-andriy.shevchenko@linux.intel.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It appears that simplification of mcp23s08_spi_regmap_init() made
a regression due to wrong size calculation for dev_kmemdup() call.
It misses the fact that config variable is already a pointer, thus
the sizeof() calculation is wrong and only 4 or 8 bytes were copied.
Fix the parameters to devm_kmemdup() to copy a full chunk of memory.
Fixes: 0874758ecb2b ("pinctrl: mcp23s08: Refactor mcp23s08_spi_regmap_init()")
Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201009180856.4738-1-andriy.shevchenko@linux.intel.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The mcp2221 driver GPIO output handling has has several issues.
* A wrong value is used for the GPIO direction.
* Wrong offsets are calculated for some GPIO set value/set direction
operations, when offset is larger than 0.
This has been fixed by introducing proper manifest constants for the
direction encoding, and using 'offsetof' when calculating GPIO
register offsets.
The updated driver has been tested with the Sparx5 pcb134/pcb135
board, which has the mcp2221 device with several (output) GPIO's.
Fixes: 328de1c519c5c092 ("HID: mcp2221: add GPIO functionality support")
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.
Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Use the uic_cmd->cmd_active as a flag to track the lifecycle of an UIC cmd.
The flag is set before sending the UIC cmd and cleared in IRQ handler. When
a PMC or UIC cmd completion timeout happens, if the flag is not set,
instead of returning timeout error, we still treat it as a successful
operation. This is to deal with the scenario in which completion has been
raised but the one waiting for the completion cannot be awaken in time due
to kernel scheduling problem.
Link: https://lore.kernel.org/r/1604384682-15837-3-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The scsi_block_reqs_cnt increased in ufshcd_hold() is supposed to be
decreased back in ufshcd_ungate_work() in a paired way. However, if
specific ufshcd_hold/release sequences are met, it is possible that
scsi_block_reqs_cnt is increased twice but only one ungate work is
queued. To make sure scsi_block_reqs_cnt is handled by ufshcd_hold() and
ufshcd_ungate_work() in a paired way, increase it only if queue_work()
returns true.
Link: https://lore.kernel.org/r/1604384682-15837-2-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <wgh@torlan.ru>
Tested-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
noc/axi/ahb are bus clk, not peripheral clk.
Since peripheral clk has a limitation that for peripheral clock slice,
IP clock slices must be stopped to change the clock source.
However if the bus clk is marked as critical clk peripheral, the
assigned clock parent operation will fail.
So we added CLK_SET_PARENT_GATE flag to avoid glitch.
And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage
Fixes: 936c383673b9e ("clk: imx: fix composite peripheral flags")
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1604229834-25594-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit f89c696e7f63 ("drm/mediatek: mtk_dpi: Convert to bridge driver")
introduced the following build warning with W=1
drivers/gpu/drm/mediatek/mtk_dpi.c:530:39: warning: unused variable 'mtk_dpi_encoder_funcs' [-Wunused-const-variable]
static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
This struct is and the 'mtk_dpi_encoder_destroy()' are not needed
anymore, so remove them.
Fixes: f89c696e7f63 ("drm/mediatek: mtk_dpi: Convert to bridge driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add the following Telit FN980 composition:
0x1055: tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
With commit 669cbc708122 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources(). These
are not added by default because they use custom properties rather than
standard DT address translation.
Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by: vtolkm@googlemail.com
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
|
|
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.
Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org
Reported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-03
The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.
Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.
A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.
Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().
Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.
Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().
Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.
Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.
Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.
Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.
Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().
There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.
Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.
The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.
The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.
* tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
can: j1939: j1939_sk_bind(): return failure if netdev is down
can: j1939: use backquotes for code samples
can: j1939: swap addr and pgn in the send example
can: j1939: fix syntax and spelling
can: j1939: rename jacd tool
...
====================
Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in
remove path"), this driver causes a "NULL pointer dereference"
in dspi_suspend/resume.
This is because since this commit, the drivers private data point to
"dspi" instead of "ctlr", the codes in suspend and resume func were
not modified correspondly.
Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove totally irq mappings create in probe, the gpio irq mapping will
be created when do
gpio_to_irq ->
rockchip_gpio_to_irq ->
irq_create_mapping
This patch can speed up system boot on, also abandon many unused irq
mappings' create.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20201013063731.3618-4-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There need to enable pclk_gpio when do irq_create_mapping, since it will
do access to gpio controller.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20201013063731.3618-3-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable Green_Sardine VCN support and VCN firmware loading
v2: use apu flags
Signed-off-by: Thong Thai <thong.thai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch enable green_sardine_asd.bin loading.
v2: use apu flags
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize the SDMA IP for green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the gfx base HW function of green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds common ip support for green_sardine.
v2: use apu flags, squash in CG/PG enablement
v3: rebase
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds green_sardine support for gpu_info firmware and ip block setting.
v2: use apu flag
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Will be used for Green_Sardine which is a new APU.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add following Telit LE910Cx compositions:
0x1203: rndis, tty, adb, tty, tty, tty, tty
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
0x1231: rndis, tty, adb, audio, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com
[ johan: add comments after entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.
Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This interrupt cause is not relevant because of how the user use the
QMAN arbitration mechanism. We must mask it as the log explodes with it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We must relocate the coresight mmu configuration to the coresight
flow to make it work in case the first submission is to configure
the profiler.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.
There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:
drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
512 | rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,
Rather than adding one more cast, just fix the type and
remove all the other casts.
Fixes: 0db575350cb1 ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As part of commit a919ba06979a7 ("hwmon: (pmbus) Stop caching register
values"), the update of the sensor value is now triggered directly by the
sensor attribute value being read from sysfs. This created (or at least
made much more likely) a locking issue, since nothing protected the device
page selection from being unexpectedly modified by concurrent reads. If
sensor values on different pages on the same device were being concurrently
read by multiple threads, this could cause spurious read errors due to the
page register not reading back the same value last written, or sensor
values being read from the incorrect page.
Add locking of the update_lock mutex in pmbus_show_sensor and
pmbus_show_samples so that these cannot result in concurrent reads from the
underlying device.
Fixes: a919ba06979a7 ("hwmon: (pmbus) Stop caching register values")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Alex Qiu <xqiu@google.com>
Link: https://lore.kernel.org/r/20201103193315.3011800-1-robert.hancock@calian.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
