summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-07-15wifi: mac80211_hwsim: do rc update per linkAndrei Otcheretianski
Make mac80211_hwsim_sta_rc_update() iterate over all the STA links. This is somewhat temporary, we really should add the link to the API, but then hwsim still calls it internally and would need this. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: implement sta_state for MLOJohannes Berg
In MLO, we need to transmit to another MLD and select the link to it, which requires knowing the station. But in TX, mac80211 will not give us a station that's not added to the driver, which in the older add/remove API is only done later. Implement the new API in MLO so we know about the STA at all times and get a pointer during TX as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: remove link_id parameter from link_info_changed()Gregory Greenman
Since struct ieee80211_bss_conf already contains link_id, passing link_id is not necessary. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: replace link_id with link_conf in ↵Gregory Greenman
switch/(un)assign_vif_chanctx() Since mac80211 already has a protected pointer to link_conf, pass it to the driver to avoid additional RCU locking. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: replace link_id with link_conf in start/stop_ap()Gregory Greenman
When calling start/stop_ap(), mac80211 already has a protected link_conf pointer. Pass it to the driver, so it shouldn't handle RCU protection. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: move ps setting to vif configJohannes Berg
This really shouldn't be in a per-link config, we don't want to let anyone control it that way (if anything, link powersave could be forced through APIs to activate/deactivate a link), and we don't support powersave in software with devices that can do MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: Align with Draft P802.11be_D2.0Ilan Peer
Align the mac80211 implementation with P802.11be_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: Ack link addressed framesAndrei Otcheretianski
Do address matching with link addresses as well. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: RCU-ify link/link_conf pointersJohannes Berg
Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211/mac80211: separate link params from station paramsShaul Triebitz
Put the link_station_parameters structure in the station_parameters structure (and remove the station_parameters fields already existing in link_station_parameters). Now, for an MLD station, the default link is added together with the station. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: Support link channel matching on rxAndrei Otcheretianski
Accept frames from all the links' channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: use 32-bit skb cookieJohannes Berg
We won't really have enough skbs to need a 64-bit cookie, and on 32-bit platforms storing the 64-bit cookie into the void *rate_driver_data doesn't work anyway. Switch back to using just a 32-bit cookie and uintptr_t for the type to avoid compiler warnings about all this. Fixes: 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: rsi: remove unused variableJohannes Berg
Remove a variable here that was now set but never used. Fixes: f276e20b182d ("wifi: mac80211: move interface config to new struct") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15crypto: sa2ul - Check engine status before enablingAndrew Davis
There is a engine status register that can be used to check if the different HW crypto engines are enabled. Check that first and then only try to enable the engines if they are not already on. This has a couple benefits. First we don't need to use match_data for this. Second, this driver can now work on HS devices where the engine control registers are read-only and writing causes a firewall exception. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: sa2ul - Set the supported_algos bits individuallyAndrew Davis
Setting these individually gives a better picture of supported functions at a glance. Plus if the list changes an unwanted one will not accidentally get set with GENMASK. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: atmel-tdes - initialize tdes_dd while declaringClaudiu Beznea
Initialize sha_dd with platform_get_drvdata() when declaring it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: atmel-sha - initialize sha_dd while declaringClaudiu Beznea
Initialize sha_dd with platform_get_drvdata() when declaring it. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: caam/qi2 - switch to netif_napi_add_tx_weight()Jakub Kicinski
caam has its own special NAPI weights. It's also a crypto device so presumably it can't be used for packet Rx. Switch to the (new) correct API. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: s5p-sss - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so pdata is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: omap-sham - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so dd is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: omap-des - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so dd is never NULL. This is a preparation for making platform remove callbacks return void. While touching this driver remove an assignment without effect. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: omap-aes - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so dd is never NULL. This is a preparation for making platform remove callbacks return void. While touching this driver remove a stray empty line. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: atmel-tdes - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so tdes_dd is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: atmel-sha - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so sha_dd is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: atmel-aes - Drop if with an always false conditionUwe Kleine-König
The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument and so aes_dd is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15crypto: ccree - Add missing clk_disable_unprepare() in cc_pm_resume()Yuan Can
Add clk_disable_unprepare() on error path in cc_pm_resume(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15Merge tag 'drm-misc-next-fixes-2022-07-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes: - dma-buf: revert change to fence handling - mgag200: fix PCI register initialization Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YtAjgcWC1zkNOGWa@linux-uq9g
2022-07-15Merge tag 'soundwire-5.20-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: "soundwire updates for 5.20-rc1 - Core: solve the driver bind/unbind problem and remove ops pointer - intel: runtime pm updates - qcom: audio clock gating updates and device status checks" * tag 'soundwire-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: qcom: Enable software clock gating requirement flag soundwire: qcom: Check device status before reading devid soundwire: qcom: Add flag for software clock gating check soundwire: qcom: Add support for controlling audio CGCR from HLOS soundwire: intel: use pm_runtime_resume() on component probe soundwire: peripheral: remove useless ops pointer soundwire: revisit driver bind/unbind and callbacks soundwire: bus_type: fix remove and shutdown support
2022-07-14Merge tag 'mlx5-updates-2022-07-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-07-13 1) Support 802.1ad for bridge offloads Vlad Buslov Says: ================= Current mlx5 bridge VLAN offload implementation only supports 802.1Q VLAN Ethernet protocol. That protocol type is assumed by default and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored. In order to support dynamically setting VLAN protocol handle SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing FDB and re-creating VLAN modify header actions with a new protocol. Implement support for 802.1ad protocol by saving the current VLAN protocol to per-bridge variable and re-create the necessary flow groups according to its current value (either use cvlan or svlan flow fields). ================== 2) debugfs to count ongoing FW commands 3) debugfs to query eswitch vport firmware diagnostic counters 4) Add missing meter configuration in flow action 5) Some misc cleanup * tag 'mlx5-updates-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features net/mlx5e: Extend flower police validation net/mlx5e: configure meter in flow action net/mlx5e: Removed useless code in function net/mlx5: Bridge, implement QinQ support net/mlx5: Bridge, implement infrastructure for VLAN protocol change net/mlx5: Bridge, extract VLAN push/pop actions creation net/mlx5: Bridge, rename filter fg to vlan_filter net/mlx5: Bridge, refactor groups sizes and indices net/mlx5: debugfs, Add num of in-use FW command interface slots net/mlx5: Expose vnic diagnostic counters for eswitch managed vports net/mlx5: Use software VHCA id when it's supported net/mlx5: Introduce ifc bits for using software vhca id net/mlx5: Use the bitmap API to allocate bitmaps ==================== Link: https://lore.kernel.org/r/20220713225859.401241-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15s390/ap: fix error handling in __verify_queue_reservations()Tony Krowiak
The AP bus's __verify_queue_reservations function increments the ref count for the device driver passed in as a parameter, but fails to decrement it before returning control to the caller. This will prevents any subsequent removal of the module. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reported-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Fixes: 4f8206b88286 ("s390/ap: driver callback to indicate resource in use") Link: https://lore.kernel.org/r/20220706222619.602094-1-akrowiak@linux.ibm.com Cc: stable@vger.kernel.org [agordeev@linux.ibm.com fixed description, added Fixes and Link] Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-07-15Merge tag 'amd-drm-next-5.20-2022-07-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.20-2022-07-14: amdgpu: - DCN3.2 updates - DC SubVP support - DP MST fixes - Audio fixes - DC code cleanup - SMU13 updates - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 - Soft reset for SDMA 6 - Add gfxoff status query for vangogh - Improve BO domain pinning - Fix timestamps for cursor only commits - MES fixes - DCN 3.1.4 support - Misc fixes - Misc code cleanup amdkfd: - Simplify GPUVM validation - Unified memory for CWSR save/restore area - fix possible list corruption on queue failure radeon: - Fix bogus power of two warning UAPI: - Unified memory for CWSR save/restore area for KFD Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
2022-07-14net: devlink: make devlink_dpipe_headers_register() return voidJiri Pirko
The return value is not used, so change the return value type to void. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-15PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()Dmitry Osipenko
It's difficult to notice that driver failed to probe by looking at KMSG when devm_devfreq_add_device() fails. Add explicit error message for this case. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zeroColin Ian King
The 3rd argument to the function of_get_property is a pointer and it is being passed using 0. Use NULL instead. Cleans up sparse warning: warning: Using plain integer as NULL pointer Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15PM / devfreq: shut up kernel-doc warningsMauro Carvalho Chehab
There are 4 warnings there: drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'val' not described in 'qos_min_notifier_call' drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'ptr' not described in 'qos_min_notifier_call' drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'val' not described in 'qos_max_notifier_call' drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'ptr' not described in 'qos_max_notifier_call' It turns that neither val nor ptr are actually used on those function, so document as such. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driverJohnson Wang
We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect (CCI) used by some MediaTek SoCs. In this driver, we use the passive devfreq driver to get target frequencies and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI is supplied by the same regulators with the little core CPUs. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: Add EXTCON_DISP_CVBS and EXTCON_DISP_EDPMichael Wu
Add EXTCON_DISP_CVBS for Composite Video Broadcast Signal. Add EXTCON_DISP_EDP for Embedded Display Port [1] https://en.wikipedia.org/wiki/Composite_video [2] https://en.wikipedia.org/wiki/DisplayPort#eDP Signed-off-by: Michael Wu <michael@allwinnertech.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: rt8973a: Drop useless mask_invert flag on irqchipAidan MacDonald
There's no need to set the flag explicitly to false, since that is the default value from zero initialization. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: sm5502: Drop useless mask_invert flag on irqchipAidan MacDonald
There's no need to set the flag explicitly to false, since that is the default value from zero initialization. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: Drop unexpected word "the" in the commentsJiang Jian
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/extcon/extcon.c line: 250 /* Find the the index of extcon cable in edev->supported_cable */ changed to /* Find the index of extcon cable in edev->supported_cable */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: Remove extraneous space before a debug messageColin Ian King
There is an extreneous space before a dev_dbg message, remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15extcon: fsa9480: Drop no-op remove functionUwe Kleine-König
A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-07-15Merge tag 'amd-drm-fixes-5.19-2022-07-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-07-13: amdgpu: - DP MST blank screen fix for specific platforms - MEC firmware check fix for GC 10.3.7 - Deep color fix for DCE - Fix possible divide by 0 - Coverage blend mode fix - Fix cursor only commit timestamps Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220713172920.6037-1-alexander.deucher@amd.com
2022-07-15Merge tag 'drm-intel-fixes-2022-07-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Selftest fix (Andrzej) - TTM fix sg_table construction (Matt Auld) - Error return fixes (Dan) - Fix a performance regression related to waitboost (Chris) - Fix GT resets (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Ys87yMujcG2sJC1R@intel.com
2022-07-15Merge tag 'drm-misc-fixes-2022-07-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Only a revert for amdgpu reverting the switch to the drm buddy allocator. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220714071821.hsejxpsgkbbzlec2@houat
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14drm/nouveau: Don't pm_runtime_put_sync(), only pm_runtime_put_autosuspend()Lyude Paul
While trying to fix another issue, it occurred to me that I don't actually think there is any situation where we want pm_runtime_put() in nouveau to be synchronous. In fact, this kind of just seems like it would cause issues where we may unexpectedly block a thread we don't expect to be blocked. So, let's only use pm_runtime_put_autosuspend(). Changes since v1: * Use pm_runtime_put_autosuspend(), not pm_runtime_put() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Fixes: 3a6536c51d5d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE") Cc: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> # v4.10+ Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-3-lyude@redhat.com
2022-07-14drm/nouveau/acpi: Don't print error when we get -EINPROGRESS from pm_runtimeLyude Paul
Since this isn't actually a failure. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Fixes: 79e765ad665d ("drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early") Cc: <stable@vger.kernel.org> # v4.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-2-lyude@redhat.com
2022-07-14drm/nouveau/kms: Fix failure path for creating DP connectorsLyude Paul
It looks like that when we moved nouveau over to using drm_dp_aux_init() and registering it's aux bus during late connector registration, we totally forgot to fix the failure codepath in nouveau_connector_create() - as it still seems to assume that drm_dp_aux_init() can fail (it can't). So, let's fix that and also add a missing check to ensure that we've properly allocated nv_connector->aux.name while we're at it. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: David Airlie <airlied@linux.ie> Fixes: fd43ad9d47e7 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister") Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20220526204313.656473-1-lyude@redhat.com
generated by cgit (git 2.34.1) at 2025-10-02 21:25:49 +0000