summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-07-20drm/amdgpu: Write masked value to control registerMaíra Canal
On the dce_v6_0 and dce_v8_0 hpd tear down callback, the tmp variable should be written into the control register instead of 0. Reviewed-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-20drm/amdgpu: fix scratch register access method in SRIOVGavin Wan
The scratch register should be accessed through MMIO instead of RLCG in SRIOV, since it being used in RLCG register access function. Fixes: d54762cc3e6a ("drm/amdgpu: nuke dynamic gfx scratch reg allocation") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-20drm/amdgpu: remove acc_size from reserve/unreserve memAlex Sierra
TTM used to track the "acc_size" of all BOs internally. We needed to keep track of it in our memory reservation to avoid TTM running out of memory in its own accounting. However, that "acc_size" accounting has since been removed from TTM. Therefore we don't really need to track it any more. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-20drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2Luben Tuikov
Protect the struct amdgpu_bo_list with a mutex. This is used during command submission in order to avoid buffer object corruption as recorded in the link below. v2 (chk): Keep the mutex looked for the whole CS to avoid using the list from multiple CS threads at the same time. Suggested-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2048 Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-20spi: spi-cadence: Fix SPI NO Slave Select macro definitionSai Krishna Potthuri
Fix SPI NO Slave Select macro definition, when all the SPI CS bits are high which means no slave is selected. Fixes: 21b511ddee09 ("spi: spi-cadence: Fix SPI CS gets toggling sporadically") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20220713164529.28444-1-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-20lkdtm: Disable return thunks in rodata.cJosh Poimboeuf
The following warning was seen: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:557 apply_returns (arch/x86/kernel/alternative.c:557 (discriminator 1)) Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc4-00008-gee88d363d156 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 RIP: 0010:apply_returns (arch/x86/kernel/alternative.c:557 (discriminator 1)) Code: ff ff 74 cb 48 83 c5 04 49 39 ee 0f 87 81 fe ff ff e9 22 ff ff ff 0f 0b 48 83 c5 04 49 39 ee 0f 87 6d fe ff ff e9 0e ff ff ff <0f> 0b 48 83 c5 04 49 39 ee 0f 87 59 fe ff ff e9 fa fe ff ff 48 89 The warning happened when apply_returns() failed to convert "JMP __x86_return_thunk" to RET. It was instead a JMP to nowhere, due to the thunk relocation not getting resolved. That rodata.o code is objcopy'd to .rodata, and later memcpy'd, so relocations don't work (and are apparently silently ignored). LKDTM is only used for testing, so the naked RET should be fine. So just disable return thunks for that file. While at it, disable objtool and KCSAN for the file. Fixes: 0b53c374b9ef ("x86/retpoline: Use -mfunction-return") Reported-by: kernel test robot <oliver.sang@intel.com> Debugged-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Ys58BxHxoDZ7rfpr@xsang-OptiPlex-9020/
2022-07-20soc: a64fx-diag: disable modular buildArnd Bergmann
The NMI infrastructure cannot currently be used in loadable modules: ERROR: modpost: "free_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! ERROR: modpost: "request_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! ERROR: modpost: "enable_nmi" [drivers/soc/fujitsu/a64fx-diag.ko] undefined! Disable this for now to make allmodconfig build again. We may revisit this and export those symbols instead in the future. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-20spi: npcm-fiu: Add NPCM8XX supportTomer Maimon
Adding FIU NPCM8XX support to NPCM FIU driver. NPCM8XX FIU supports four controllers. As part of adding NPCM8XX support: - Add NPCM8XX specific compatible string. - Using an internal burst configuration register instead of a GCR register. - Support FIU1 controller. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20220718081146.256070-4-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-20spi: npcm-fiu: Modify direct read dummy configurationTomer Maimon
Modify NPCM BMC FIU direct read dummy configuration that according spi-mem direct read function. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20220718081146.256070-2-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-20hwmon: (k10temp): Add support for new family 17h and 19h modelsMario Limonciello
Add the support for CCD offsets used on family 17h models A0h-AFh, and family 19h models 60h-7Fh. [ bp: Merge into a single patch. ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220719195256.1516-1-mario.limonciello@amd.com
2022-07-20Merge branch irq/loongarch into irq/irqchip-nextMarc Zyngier
* irq/loongarch: : . : Merge the long awaited IRQ support for the LoongArch architecture. : : From the cover letter: : : "Currently, LoongArch based processors (e.g. Loongson-3A5000) : can only work together with LS7A chipsets. The irq chips in : LoongArch computers include CPUINTC (CPU Core Interrupt : Controller), LIOINTC (Legacy I/O Interrupt Controller), : EIOINTC (Extended I/O Interrupt Controller), PCH-PIC (Main : Interrupt Controller in LS7A chipset), PCH-LPC (LPC Interrupt : Controller in LS7A chipset) and PCH-MSI (MSI Interrupt Controller)." : : Note that this comes with non-official, arch private ACPICA : definitions until the official ACPICA update is realeased. : . irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-20spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA ↵Marc Kleine-Budde
transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them. Fixes: 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220719072234.2782764-1-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-20irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArchJianmin Lv
For LoongArch, ACPI_IRQ_MODEL_LPIC is introduced, and then the callback acpi_get_gsi_domain_id and acpi_gsi_to_irq_fallback are implemented. The acpi_get_gsi_domain_id callback returns related fwnode handle of irqdomain for different GSI range. The acpi_gsi_to_irq_fallback will create new mapping for gsi when the mapping of it is not found. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-14-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add LoongArch CPU interrupt controller supportHuacai Chen
LoongArch CPUINTC stands for CSR.ECFG/CSR.ESTAT and related interrupt controller that described in Section 7.4 of "LoongArch Reference Manual, Vol 1". For more information please refer Documentation/loongarch/irq- chip-model.rst. LoongArch CPUINTC has 13 interrupt sources: SWI0~1, HWI0~7, IPI, TI (Timer) and PCOV (PMC). IRQ mappings of HWI0~7 are configurable (can be created from DT/ACPI), but IPI, TI (Timer) and PCOV (PMC) are hardcoded bits, so we expose the fwnode_handle to map them, and get mapped irq by irq_create_mapping when using them. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-13-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add Loongson Extended I/O interrupt controller supportHuacai Chen
EIOINTC stands for "Extended I/O Interrupts" that described in Section 11.2 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Loongson-3A5000 has 4 cores per NUMA node, and each NUMA node has an EIOINTC; while Loongson-3C5000 has 16 cores per NUMA node, and each NUMA node has 4 EIOINTCs. In other words, 16 cores of one NUMA node in Loongson-3C5000 are organized in 4 groups, each group connects to an EIOINTC. We call the "group" here as an EIOINTC node, so each EIOINTC node always includes 4 cores (both in Loongson-3A5000 and Loongson- 3C5000). Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-12-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-liointc: Add ACPI init supportHuacai Chen
LIOINTC stands for "Legacy I/O Interrupts" that described in Section 11.1 of "Loongson 3A5000 Processor Reference Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-pch-msi: Add ACPI init supportHuacai Chen
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-10-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip/loongson-pch-pic: Add ACPI init supportHuacai Chen
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in Section 5 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-9-git-send-email-lvjianmin@loongson.cn
2022-07-20irqchip: Add Loongson PCH LPC controller supportHuacai Chen
PCH-LPC stands for "LPC Interrupts" that described in Section 24.3 of "Loongson 7A1000 Bridge User Manual". For more information please refer Documentation/loongarch/irq-chip-model.rst. Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1658314292-35346-8-git-send-email-lvjianmin@loongson.cn
2022-07-20ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallbackMarc Zyngier
It appears that the generic version of acpi_gsi_to_irq() doesn't fallback to establishing a mapping if there is no pre-existing one while the x86 version does. While arm64 seems unaffected by it, LoongArch is relying on the x86 behaviour. In an effort to prevent new architectures from reinventing the proverbial wheel, provide an optional callback that the arch code can set to restore the x86 behaviour. Hopefully we can eventually get rid of this in the future once the expected behaviour has been clarified. Reported-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1658314292-35346-4-git-send-email-lvjianmin@loongson.cn
2022-07-20APCI: irq: Add support for multiple GSI domainsMarc Zyngier
In an unfortunate departure from the ACPI spec, the LoongArch architecture split its GSI space across multiple interrupt controllers. In order to be able to reuse the core code and prevent architectures from reinventing an already square wheel, offer the arch code the ability to register a dispatcher function that will return the domain fwnode for a given GSI. The ARM GIC drivers are updated to support this (with a single domain, as intended). Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1658314292-35346-3-git-send-email-lvjianmin@loongson.cn
2022-07-20Merge tag 'linux-can-fixes-for-5.19-20220720' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 2 patches for net/master. The first patch is by me and fixes the detection of the mcp251863 in the mcp251xfd driver. The last patch is by Liang He and adds a missing of_node_put() in the rcar_canfd driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: ipa: initialize ring indexes to 0Alex Elder
When a GSI channel is initially allocated, and after it has been reset, the hardware assumes its ring index is 0. And although we do initialize channels this way, the comments in the IPA code don't really explain this. For event rings, it doesn't matter what value we use initially, so using 0 is just fine. Add some information about the assumptions made by hardware above the definition of the gsi_ring structure in "gsi.h". Zero the index field for all rings (channel and event) when the ring is allocated. As a result, that function initializes all fields in the structure. Stop zeroing the index the top of gsi_channel_program(). Initially we'll use the index value set when the channel ring was allocated. And we'll explicitly zero the index value in gsi_channel_reset() before programming the hardware, adding a comment explaining why it's required. For event rings, use the index initialized by gsi_ring_alloc() rather than 0 when ringing the doorbell in gsi_evt_ring_program(). (It'll still be zero, but we won't assume that to be the case.) Use a local variable in gsi_evt_ring_program() that represents the address of the event ring's ring structure. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20mlxsw: spectrum_router: Fix IPv4 nexthop gateway indicationIdo Schimmel
mlxsw needs to distinguish nexthops with a gateway from connected nexthops in order to write the former to the adjacency table of the device. The check used to rely on the fact that nexthops with a gateway have a 'link' scope whereas connected nexthops have a 'host' scope. This is no longer correct after commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fix that by instead checking the address family of the gateway IP. This is a more direct way and also consistent with the IPv6 counterpart in mlxsw_sp_rt6_is_gateway(). Cc: stable@vger.kernel.org Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop") Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: marvell: prestera: add phylink supportOleksandr Mazur
For SFP port prestera driver will use kernel phylink infrastucture to configure port mode based on the module that has beed inserted Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20vmxnet3: Implement ethtool's get_channels commandAndrey Turkin
Some tools (e.g. libxdp) use that information. Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20Merge tag 'linux-can-next-for-5.20-20220720' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first 6 patches target the slcan driver. Dan Carpenter contributes a hardening patch, followed by 5 cleanup patches. Biju Das contributes 5 patches to prepare the sja1000 driver to support the Renesas RZ/N1 SJA1000 CAN controller. Dario Binacchi's patch for the slcan driver fixes a sleep with held spin lock. Another patch by Dario Binacchi fixes a wrong comment in the c_can driver. Pavel Pisa updates the CTU CAN FD IP core registers. Stephane Grosjean contributes 3 patches to the peak_usb driver for cleanups and support of a new MCU. The last 12 patches are by Vincent Mailhol, they fix and improve the txerr and rxerr reporting in all CAN drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20tcp: Fix data-races around sysctl knobs related to SYN option.Kuniyuki Iwashima
While reading these knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_sack - tcp_window_scaling - tcp_timestamps Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.Kuniyuki Iwashima
While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.Kuniyuki Iwashima
While reading sysctl_fib_multipath_hash_policy, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()Liang He
We should use of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.com Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: mcp251xfd: fix detection of mcp251863Marc Kleine-Budde
In commit c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") support for the mcp251863 was added. However it was not taken into account that the auto detection of the chip model cannot distinguish between mcp2518fd and mcp251863 and would lead to a warning message if the firmware specifies a mcp251863. Fix auto detection: If a mcp2518fd compatible chip is found, keep the mcp251863 if specified by firmware, use mcp2518fd instead. Link: https://lore.kernel.org/all/20220706064835.1848864-1-mkl@pengutronix.de Fixes: c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: add CAN_ERR_CNT flag to notify availability of error counterVincent Mailhol
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: usb_8dev: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: kvaser_usb_leaf: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: kvaser_usb_hydra: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: sun4i_can: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr CC: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: hi311x: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: slcan: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. alloc_can_err_skb() already sets cf to NULL if the allocation fails [1], so the redundant cf = NULL assignment gets removed. [1] https://elixir.bootlin.com/linux/latest/source/drivers/net/can/dev/skb.c#L187 Fixes: 0a9cdcf098a4 ("can: slcan: extend the protocol with CAN state info") Link: https://lore.kernel.org/all/20220719143550.3681-5-mailhol.vincent@wanadoo.fr CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: sja1000: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling") Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: rcar_can: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: pch_can: do not report txerr and rxerr during bus-offVincent Mailhol
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0c78ab76a05c ("pch_can: Add setting TEC/REC statistics processing") Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20drm/imx/dcss: Add missing of_node_put() in fail pathLiang He
In dcss_dev_create() and dcss_dev_destroy(), we should call of_node_put() in fail path or before the dcss's destroy as of_graph_get_port_by_id() has increased the refcount. Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220714081337.374761-1-windhl@126.com
2022-07-19drm/i915/guc: support v69 in parallel to v70Daniele Ceraolo Spurio
This patch re-introduces support for GuC v69 in parallel to v70. As this is a quick fix, v69 has been re-introduced as the single "fallback" guc version in case v70 is not available on disk and only for platforms that are out of force_probe and require the GuC by default. All v69 specific code has been labeled as such for easy identification, and the same was done for all v70 functions for which there is a separate v69 version, to avoid accidentally calling the wrong version via the unlabeled name. When the fallback mode kicks in, a drm_notice message is printed in dmesg to inform the user of the required update. The existing logging of the fetch function has also been updated so that we no longer complain immediately if we can't find a fw and we only throw an error if the fetch of both the base and fallback blobs fails. The plan is to follow this up with a more complex rework to allow for multiple different GuC versions to be supported at the same time. v2: reduce the fallback to platform that require it, switch to firmware_request_nowarn(), improve logs. Fixes: 2584b3549f4c ("drm/i915/guc: Update to GuC version 70.1.1") Link: https://lists.freedesktop.org/archives/intel-gfx/2022-July/301640.html Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220718230732.1409641-1-daniele.ceraolospurio@intel.com (cherry picked from commit 774ce1510e6ccb9c0752d4aa7a9ff3624b3db3f3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-19drm/i915/guc: Support programming the EU priority in the GuC descriptorMatthew Brost
In GuC submission mode the EU priority must be updated by the GuC rather than the driver as the GuC owns the programming of the context descriptor. Given that the GuC code uses the GuC priorities, we can't use a generic function using i915 priorities for both execlists and GuC submission. The existing function has therefore been pushed to the execlists back-end while a new one has been added for GuC. v2: correctly use the GuC prio. Cc: John Harrison <john.c.harrison@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504234636.2119794-1-daniele.ceraolospurio@intel.com (cherry picked from commit a5c89f7c43c12c592a882a0ec2a15e9df0011e80) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-20platform/chrome: cros_kbd_led_backlight: fix build warningTzung-Bi Shih
drivers/platform/chrome/cros_kbd_led_backlight.c got a new build warning when using the randconfig in [1]: >>> warning: unused variable 'keyboard_led_drvdata_ec_pwm' The warning happens when CONFIG_CROS_EC is set but CONFIG_OF is not set. Reproduce: - mkdir build_dir - wget [1] -O build_dir/.config - COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 \ O=build_dir ARCH=s390 SHELL=/bin/bash drivers/platform/chrome/ Fix the warning by using __maybe_unused. Also use IS_ENABLED() because CROS_EC is a tristate. [1]: https://download.01.org/0day-ci/archive/20220717/202207170538.MR39dw8m-lkp@intel.com/config Fixes: 40f58143745e ("platform/chrome: cros_kbd_led_backlight: support EC PWM backend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220718105047.2356542-1-tzungbi@kernel.org
2022-07-20platform/chrome: cros_ec_proto: add Kunit test for cros_ec_cmd()Tzung-Bi Shih
cros_ec_cmd() is a wrapper of cros_ec_cmd_xfer_status(). Add Kunit test for cros_ec_cmd(). Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220622041040.202737-8-tzungbi@kernel.org
2022-07-20platform/chrome: cros_ec_proto: add Kunit tests for get_sensor_countTzung-Bi Shih
cros_ec_get_sensor_count() gets number of MEMS sensors. Add Kunit tests for cros_ec_get_sensor_count(). Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220622041040.202737-7-tzungbi@kernel.org
2022-07-20platform/chrome: cros_ec_proto: add Kunit tests for check_featuresTzung-Bi Shih
cros_ec_check_features() gets EC features if it hasn't had cache, and checks whether the given EC_FEATURE_* is supported or not. Add Kunit tests for cros_ec_check_features(). Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220622041040.202737-6-tzungbi@kernel.org
2022-07-20platform/chrome: cros_ec_proto: add Kunit tests for get_host_eventTzung-Bi Shih
cros_ec_get_host_event() performs some sanity checks, parses `ec_dev->event_data.data.host_event`, and returns bitmap of EC_HOST_EVENT_*. Add Kunit tests for cros_ec_get_host_event(). Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220622041040.202737-5-tzungbi@kernel.org
generated by cgit (git 2.34.1) at 2025-09-29 08:33:53 +0000