summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-09x86/hyperv: Fix hv tsc page based sched_clock for hibernationNaman Jain
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds). Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. This makes hv tsc page based sched_clock continuous and ensures that post resume, it starts from where it left off during suspend. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state routines to correct this as soon as possible. Note: if Invariant TSC is available, the issue doesn't happen because 1) we don't register read_hv_sched_clock_tsc() for sched clock: See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup"); 2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state(). Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
2024-12-09Merge tag 'scmi-fix-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.13 Fix for the build issue in the ASoC driver with the SCMI support by enforcing the link-time dependency if IMX_SCMI_MISC_DRV is a loadable module but not if that is disabled. * tag 'scmi-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix i.MX build dependency Link: https://lore.kernel.org/r/20241205114348.708618-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-09net: sparx5: fix the maximum frame length registerDaniel Machon
On port initialization, we configure the maximum frame length accepted by the receive module associated with the port. This value is currently written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix this. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix default value of monitor portsDaniel Machon
When doing port mirroring, the physical port to send the frame to, is written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register. This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has a default value of 65 and 30, respectively (the number of front ports). On mirror deletion, we set the default value of the monitor port to 65 for this field, in case no more ports exists for the mirror. Needless to say, this will not fit the 6 bits on lan969x. Fix this by correctly using the n_ports constant instead. Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix FDMA performance issueDaniel Machon
The FDMA handler is responsible for scheduling a NAPI poll, which will eventually fetch RX packets from the FDMA queue. Currently, the FDMA handler is run in a threaded context. For some reason, this kills performance. Admittedly, I did not do a thorough investigation to see exactly what causes the issue, however, I noticed that in the other driver utilizing the same FDMA engine, we run the FDMA handler in hard IRQ context. Fix this performance issue, by running the FDMA handler in hard IRQ context, not deferring any work to a thread. Prior to this change, the RX UDP performance was: Interval Transfer Bitrate Jitter 0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms After this change, the rx UDP performance is: Interval Transfer Bitrate Jitter 0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: lan969x: fix the use of spin_lock in PTP handlerDaniel Machon
We are mixing the use of spin_lock() and spin_lock_irqsave() functions in the PTP handler of lan969x. Fix this by correctly using the _irqsave variants. Fixes: 24fe83541755 ("net: lan969x: add PTP handler function") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> [1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: lan969x: fix cyclic dependency reported by depmodDaniel Machon
Depmod reports a cyclic dependency between modules sparx5-switch.ko and lan969x-switch.ko: depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch depmod: ERROR: Found 2 modules in dependency cycles! make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1 make: *** [Makefile:224: __sub-make] Error 2 This makes sense, as they both require symbols from each other. Fix this by compiling lan969x support into the sparx5-switch.ko module. In order to do this, in a sensible way, we move the lan969x/ dir into the sparx5/ dir and do some code cleanup of code that is no longer required. After this patch, depmod will no longer complain, as lan969x support is compiled into the sparx5-swicth.ko module, and can no longer be compiled as a standalone module. Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA.Niravkumar L Rabara
STIG mode is enabled by default for less than 8 bytes data read/write. STIG mode doesn't work with Altera SocFPGA platform due hardware limitation. Add a quirks to disable STIG mode for Altera SoCFPGA platform. Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Link: https://patch.msgid.link/20241204063338.296959-1-niravkumar.l.rabara@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09spi: rockchip: Fix PM runtime count on no-op csChristian Loehle
The early bail out that caused an out-of-bounds write was removed with commit 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access") Unfortunately that caused the PM runtime count to be unbalanced and underflowed on the first call. To fix that reintroduce a no-op check by reading the register directly. Cc: stable@vger.kernel.org Fixes: 5c018e378f91 ("spi: spi-rockchip: Fix out of bounds array access") Signed-off-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/1f2b3af4-2b7a-4ac8-ab95-c80120ebf44c@arm.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()Christophe JAILLET
A aspeed_spi_start_user() is not balanced by a corresponding aspeed_spi_stop_user(). Add the missing call. Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09regulator: axp20x: AXP717: set ramp_delayPhilippe Simons
AXP717 datasheet says that regulator ramp delay is 15.625 us/step, which is 10mV in our case. Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0 For DCDC4, steps is 100mv Add a AXP_DESC_DELAY macro and update AXP_DESC macro to expand to AXP_DESC_DELAY with ramp_delay = 0 This patch fix crashes when using CPU DVFS. Signed-off-by: Philippe Simons <simons.philippe@gmail.com> Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717") Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-09drm/i915: Fix memory leak by correcting cache object name in error handlerJiasheng Jiang
Replace "slab_priorities" with "slab_dependencies" in the error handler to avoid memory leak. Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@outlook.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127201042.29620-1-jiashengjiangcool@gmail.com (cherry picked from commit 9bc5e7dc694d3112bbf0fa4c46ef0fa0f114937a) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915: Fix NULL pointer dereference in capture_engineEugene Kobyak
When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/color: Stop using non-posted DSB writes for legacy LUTVille Syrjälä
DSB LUT register writes vs. palette anti-collision logic appear to interact in interesting ways: - posted DSB writes simply vanish into thin air while anti-collision is active - non-posted DSB writes actually get blocked by the anti-collision logic, but unfortunately this ends up hogging the bus for long enough that unrelated parallel CPU MMIO accesses start to disappear instead Even though we are updating the LUT during vblank we aren't immune to the anti-collision logic because it kicks in briefly for pipe prefill (initiated at frame start). The safe time window for performing the LUT update is thus between the undelayed vblank and frame start. Turns out that with low enough CDCLK frequency (DSB execution speed depends on CDCLK) we can exceed that. As we are currently using non-posted writes for the legacy LUT updates, in which case we can hit the far more severe failure mode. The problem is exacerbated by the fact that non-posted writes are much slower than posted writes (~4x it seems). To mititage the problem let's switch to using posted DSB writes for legacy LUT updates (which will involve using the double write approach to avoid other problems with DSB vs. legacy LUT writes). Despite writing each register twice this will in fact make the legacy LUT update faster when compared to the non-posted write approach, making the problem less likely to appear. The failure mode is also less severe. This isn't the 100% solution we need though. That will involve estimating how long the LUT update will take, and pushing frame start and/or delayed vblank forward to guarantee that the update will have finished by the time the pipe prefill starts... Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12494 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit 2504a316b35d49522f39cf0dc01830d7c36a9be4) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09drm/i915/dsb: Don't use indexed register writes needlesslyVille Syrjälä
Turns out the DSB indexed register write command has rather significant initial overhead compared to the normal MMIO write command. Based on some quick experiments on TGL you have to write the register at least ~5 times for the indexed write command to come out ahead. If you write the register less times than that the MMIO write is faster. So it seems my automagic indexed write logic was a bit misguided. Go back to the original approach only use indexed writes for the cases we know will benefit from it (indexed LUT register updates). Currently we shouldn't have any cases where this truly matters (just some rare double writes to the precision LUT index registers), but we will need to switch the legacy LUT updates to write each LUT register twice (to avoid some palette anti-collision logic troubles). This would be close to the worst case for using indexed writes (two writes per register, and 256 separate registers). Using the MMIO write command should shave off around 30% of the execution time compared to using the indexed write command. Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Fixes: 25ea3411bd23 ("drm/i915/dsb: Use non-posted register writes for legacy LUT") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241120164123.12706-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> (cherry picked from commit ecba559a88ab8399a41893d7828caf4dccbeab6c) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-12-09ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()Joe Hattori
The OF node reference obtained by of_parse_phandle_with_args() is not released on early return. Add a of_node_put() call before returning. Fixes: 8996b89d6bc9 ("ata: add platform driver for Calxeda AHCI controller") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-12-08Merge tag 'irq_urgent_for_v6.13_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a /proc/interrupts formatting regression - Have the BCM2836 interrupt controller enter power management states properly - Other fixlets * tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing genirq/proc: Add missing space separator back irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/gic-v3: Fix irq_complete_ack() comment
2024-12-08Merge tag 'x86_urgent_for_v6.13_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Have the Automatic IBRS setting check on AMD does not falsely fire in the guest when it has been set already on the host - Make sure cacheinfo structures memory is allocated to address a boot NULL ptr dereference on Intel Meteor Lake which has different numbers of subleafs in its CPUID(4) leaf - Take care of the GDT restoring on the kexec path too, as expected by the kernel - Make sure SMP is not disabled when IO-APIC is disabled on the kernel cmdline - Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to propagate changes to the kernelmode page tables, to the user portion, in PTI - Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups can get lost and thus user-visible delays happen - Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU write of 0 (WRPKRU) which will mark PKRU in its init state and thus lose the actual buffer * tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails x86/cacheinfo: Delete global num_cache_leaves cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU x86/kexec: Restore GDT on return from ::preserve_context kexec x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation x86/pkeys: Ensure updated PKRU value is XRSTOR'd x86/pkeys: Change caller of update_pkru_in_sigframe()
2024-12-08Merge tag 'mm-hotfixes-stable-2024-12-07-22-39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM. The usual bunch of singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits) iio: magnetometer: yas530: use signed integer type for clamp limits sched/numa: fix memory leak due to the overwritten vma->numab_state mm/damon: fix order of arguments in damos_before_apply tracepoint lib: stackinit: hide never-taken branch from compiler mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio() scatterlist: fix incorrect func name in kernel-doc mm: correct typo in MMAP_STATE() macro mm: respect mmap hint address when aligning for THP mm: memcg: declare do_memsw_account inline mm/codetag: swap tags when migrate pages ocfs2: update seq_file index in ocfs2_dlm_seq_next stackdepot: fix stack_depot_save_flags() in NMI context mm: open-code page_folio() in dump_page() mm: open-code PageTail in folio_flags() and const_folio_flags() mm: fix vrealloc()'s KASAN poisoning logic Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" selftests/damon: add _damon_sysfs.py to TEST_FILES selftest: hugetlb_dio: fix test naming ocfs2: free inode when ocfs2_get_init_inode() fails nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry() ...
2024-12-08iio: adc: ti-ads1119: fix sample size in scan struct for triggered bufferJavier Carrasco
This device returns signed, 16-bit samples as stated in its datasheet (see 8.5.2 Data Format). That is in line with the scan_type definition for the IIO_VOLTAGE channel, but 'unsigned int' is being used to read and push the data to userspace. Given that the size of that type depends on the architecture (at least 2 bytes to store values up to 65535, but its actual size is often 4 bytes), use the 's16' type to provide the same structure in all cases. Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20241202-ti-ads1119_s16_chan-v1-1-fafe3136dc90@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-08iio: temperature: tmp006: fix information leak in triggered bufferJavier Carrasco
The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the two 16-bit data channels and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Fixes: 91f75ccf9f03 ("iio: temperature: tmp006: add triggered buffer support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241204-iio_memset_scan_holes-v2-1-3f941592a76d@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-08iio: inkern: call iio_device_put() only on mapped devicesJoe Hattori
In the error path of iio_channel_get_all(), iio_device_put() is called on all IIO devices, which can cause a refcount imbalance. Fix this error by calling iio_device_put() only on IIO devices whose refcounts were previously incremented by iio_device_get(). Fixes: 314be14bb893 ("iio: Rename _st_ functions to loose the bit that meant the staging version.") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241204111342.1246706-1-joe@pf.is.s.u-tokyo.ac.jp Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-08phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PMCristian Ciocaltea
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before platform_set_drvdata() is executed in ->probe(), leading to a NULL pointer dereference when using the return of dev_get_drvdata(). Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20241023-phy-sam-hdptx-rpm-fix-v1-1-87f4c994e346@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-07net: mscc: ocelot: perform error cleanup in ocelot_hwstamp_set()Vladimir Oltean
An unsupported RX filter will leave the port with TX timestamping still applied as per the new request, rather than the old setting. When parsing the tx_type, don't apply it just yet, but delay that until after we've parsed the rx_filter as well (and potentially returned -ERANGE for that). Similarly, copy_to_user() may fail, which is a rare occurrence, but should still be treated by unwinding what was done. Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-6-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07net: mscc: ocelot: be resilient to loss of PTP packets during transmissionVladimir Oltean
The Felix DSA driver presents unique challenges that make the simplistic ocelot PTP TX timestamping procedure unreliable: any transmitted packet may be lost in hardware before it ever leaves our local system. This may happen because there is congestion on the DSA conduit, the switch CPU port or even user port (Qdiscs like taprio may delay packets indefinitely by design). The technical problem is that the kernel, i.e. ocelot_port_add_txtstamp_skb(), runs out of timestamp IDs eventually, because it never detects that packets are lost, and keeps the IDs of the lost packets on hold indefinitely. The manifestation of the issue once the entire timestamp ID range becomes busy looks like this in dmesg: mscc_felix 0000:00:00.5: port 0 delivering skb without TX timestamp mscc_felix 0000:00:00.5: port 1 delivering skb without TX timestamp At the surface level, we need a timeout timer so that the kernel knows a timestamp ID is available again. But there is a deeper problem with the implementation, which is the monotonically increasing ocelot_port->ts_id. In the presence of packet loss, it will be impossible to detect that and reuse one of the holes created in the range of free timestamp IDs. What we actually need is a bitmap of 63 timestamp IDs tracking which one is available. That is able to use up holes caused by packet loss, but also gives us a unique opportunity to not implement an actual timer_list for the timeout timer (very complicated in terms of locking). We could only declare a timestamp ID stale on demand (lazily), aka when there's no other timestamp ID available. There are pros and cons to this approach: the implementation is much more simple than per-packet timers would be, but most of the stale packets would be quasi-leaked - not really leaked, but blocked in driver memory, since this algorithm sees no reason to free them. An improved technique would be to check for stale timestamp IDs every time we allocate a new one. Assuming a constant flux of PTP packets, this avoids stale packets being blocked in memory, but of course, packets lost at the end of the flux are still blocked until the flux resumes (nobody left to kick them out). Since implementing per-packet timers is way too complicated, this should be good enough. Testing procedure: Persistently block traffic class 5 and try to run PTP on it: $ tc qdisc replace dev swp3 parent root taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0xdf 100000 flags 0x2 [ 126.948141] mscc_felix 0000:00:00.5: port 3 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS $ ptp4l -i swp3 -2 -P -m --socket_priority 5 --fault_reset_interval ASAP --logSyncInterval -3 ptp4l[70.351]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.354]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[70.358]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 70.394583] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[70.406]: timed out while polling for tx timestamp ptp4l[70.406]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[70.406]: port 1 (swp3): send peer delay response failed ptp4l[70.407]: port 1 (swp3): clearing fault immediately ptp4l[70.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 71.394858] mscc_felix 0000:00:00.5: port 3 timestamp id 1 ptp4l[71.400]: timed out while polling for tx timestamp ptp4l[71.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[71.401]: port 1 (swp3): send peer delay response failed ptp4l[71.401]: port 1 (swp3): clearing fault immediately [ 72.393616] mscc_felix 0000:00:00.5: port 3 timestamp id 2 ptp4l[72.401]: timed out while polling for tx timestamp ptp4l[72.402]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[72.402]: port 1 (swp3): send peer delay response failed ptp4l[72.402]: port 1 (swp3): clearing fault immediately ptp4l[72.952]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 73.395291] mscc_felix 0000:00:00.5: port 3 timestamp id 3 ptp4l[73.400]: timed out while polling for tx timestamp ptp4l[73.400]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[73.400]: port 1 (swp3): send peer delay response failed ptp4l[73.400]: port 1 (swp3): clearing fault immediately [ 74.394282] mscc_felix 0000:00:00.5: port 3 timestamp id 4 ptp4l[74.400]: timed out while polling for tx timestamp ptp4l[74.401]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[74.401]: port 1 (swp3): send peer delay response failed ptp4l[74.401]: port 1 (swp3): clearing fault immediately ptp4l[74.953]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 75.396830] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 75.405760] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[75.410]: timed out while polling for tx timestamp ptp4l[75.411]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it ptp4l[75.411]: port 1 (swp3): send peer delay response failed ptp4l[75.411]: port 1 (swp3): clearing fault immediately (...) Remove the blocking condition and see that the port recovers: $ same tc command as above, but use "sched-entry S 0xff" instead $ same ptp4l command as above ptp4l[99.489]: port 1 (swp3): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.490]: port 0 (/var/run/ptp4l): INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[99.492]: port 0 (/var/run/ptp4lro): INITIALIZING to LISTENING on INIT_COMPLETE [ 100.403768] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 0 which seems lost [ 100.412545] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 1 which seems lost [ 100.421283] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 2 which seems lost [ 100.430015] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 3 which seems lost [ 100.438744] mscc_felix 0000:00:00.5: port 3 invalidating stale timestamp ID 4 which seems lost [ 100.447470] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 100.505919] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[100.963]: port 1 (swp3): new foreign master d858d7.fffe.00ca6d-1 [ 101.405077] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 101.507953] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.405405] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 102.509391] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.406003] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 103.510011] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.405601] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 104.510624] mscc_felix 0000:00:00.5: port 3 timestamp id 0 ptp4l[104.965]: selected best master clock d858d7.fffe.00ca6d ptp4l[104.966]: port 1 (swp3): assuming the grand master role ptp4l[104.967]: port 1 (swp3): LISTENING to GRAND_MASTER on RS_GRAND_MASTER [ 105.106201] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.232420] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.359001] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.405500] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.485356] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.511220] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.610938] mscc_felix 0000:00:00.5: port 3 timestamp id 0 [ 105.737237] mscc_felix 0000:00:00.5: port 3 timestamp id 0 (...) Notice that in this new usage pattern, a non-congested port should basically use timestamp ID 0 all the time, progressing to higher numbers only if there are unacknowledged timestamps in flight. Compare this to the old usage, where the timestamp ID used to monotonically increase modulo OCELOT_MAX_PTP_ID. In terms of implementation, this simplifies the bookkeeping of the ocelot_port :: ts_id and ptp_skbs_in_flight. Since we need to traverse the list of two-step timestampable skbs for each new packet anyway, the information can already be computed and does not need to be stored. Also, ocelot_port->tx_skbs is always accessed under the switch-wide ocelot->ts_id_lock IRQ-unsafe spinlock, so we don't need the skb queue's lock and can use the unlocked primitives safely. This problem was actually detected using the tc-taprio offload, and is causing trouble in TSN scenarios, which Felix (NXP LS1028A / VSC9959) supports but Ocelot (VSC7514) does not. Thus, I've selected the commit to blame as the one adding initial timestamping support for the Felix switch. Fixes: c0bcf537667c ("net: dsa: ocelot: add hardware timestamping support for Felix") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07net: mscc: ocelot: ocelot->ts_id_lock and ocelot_port->tx_skbs.lock are IRQ-safeVladimir Oltean
ocelot_get_txtstamp() is a threaded IRQ handler, requested explicitly as such by both ocelot_ptp_rdy_irq_handler() and vsc9959_irq_handler(). As such, it runs with IRQs enabled, and not in hardirq context. Thus, ocelot_port_add_txtstamp_skb() has no reason to turn off IRQs, it cannot be preempted by ocelot_get_txtstamp(). For the same reason, dev_kfree_skb_any_reason() will always evaluate as kfree_skb_reason() in this calling context, so just simplify the dev_kfree_skb_any() call to kfree_skb(). Also, ocelot_port_txtstamp_request() runs from NET_TX softirq context, not with hardirqs enabled. Thus, ocelot_get_txtstamp() which shares the ocelot_port->tx_skbs.lock lock with it, has no reason to disable hardirqs. This is part of a larger rework of the TX timestamping procedure. A logical subportion of the rework has been split into a separate change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07net: mscc: ocelot: improve handling of TX timestamp for unknown skbVladimir Oltean
This condition, theoretically impossible to trigger, is not really handled well. By "continuing", we are skipping the write to SYS_PTP_NXT which advances the timestamp FIFO to the next entry. So we are reading the same FIFO entry all over again, printing stack traces and eventually killing the kernel. No real problem has been observed here. This is part of a larger rework of the timestamp IRQ procedure, with this logical change split out into a patch of its own. We will need to "goto next_ts" for other conditions as well. Fixes: 9fde506e0c53 ("net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07net: mscc: ocelot: fix memory leak on ocelot_port_add_txtstamp_skb()Vladimir Oltean
If ocelot_port_add_txtstamp_skb() fails, for example due to a full PTP timestamp FIFO, we must undo the skb_clone_sk() call with kfree_skb(). Otherwise, the reference to the skb clone is lost. Fixes: 52849bcf0029 ("net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241205145519.1236778-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07net: stmmac: fix TSO DMA API usage causing oopsRussell King (Oracle)
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ Reported-by: Jon Hunter <jonathanh@nvidia.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-07Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Large number of small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: scsi_debug: Fix hrtimer support for ndelay scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error scsi: ufs: core: Add missing post notify for power mode change scsi: sg: Fix slab-use-after-free read in sg_release() scsi: ufs: core: sysfs: Prevent div by zero scsi: qla2xxx: Update version to 10.02.09.400-k scsi: qla2xxx: Supported speed displayed incorrectly for VPorts scsi: qla2xxx: Fix NVMe and NPIV connect issue scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt scsi: qla2xxx: Fix use after free on unload scsi: qla2xxx: Fix abort in bsg timeout scsi: mpi3mr: Update driver version to 8.12.0.3.50 scsi: mpi3mr: Handling of fault code for insufficient power scsi: mpi3mr: Start controller indexing from 0 scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs scsi: mpi3mr: Synchronize access to ioctl data buffer scsi: mpt3sas: Update driver version to 51.100.00.00 scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove() ...
2024-12-07Merge tag 'block-6.13-20241207' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Target fix using incorrect zero buffer (Nilay) - Device specifc deallocate quirk fixes (Christoph, Keith) - Fabrics fix for handling max command target bugs (Maurizio) - Cocci fix usage for kzalloc (Yu-Chen) - DMA size fix for host memory buffer feature (Christoph) - Fabrics queue cleanup fixes (Chunguang) - CPU hotplug ordering fixes - Add missing MODULE_DESCRIPTION for rnull - bcache error value fix - virtio-blk queue freeze fix * tag 'block-6.13-20241207' of git://git.kernel.dk/linux: blk-mq: move cpuhp callback registering out of q->sysfs_lock blk-mq: register cpuhp callback after hctx is added to xarray table virtio-blk: don't keep queue frozen during system suspend nvme-tcp: simplify nvme_tcp_teardown_io_queues() nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues() nvme-rdma: unquiesce admin_q before destroy it nvme-tcp: fix the memleak while create new ctrl failed nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary nvmet: replace kmalloc + memset with kzalloc for data allocation nvme-fabrics: handle zero MAXCMD without closing the connection bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again nvme-pci: remove two deallocate zeroes quirks block: rnull: add missing MODULE_DESCRIPTION nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
2024-12-07iio: adc: ad9467: Fix the "don't allow reading vref if not available" caseChristophe JAILLET
The commit in Fixes adds a special case when only one possible scale is available. If several scales are available, it sets the .read_avail field of the struct iio_info to ad9467_read_avail(). However, this field already holds this function pointer, so the code is a no-op. Use another struct iio_info instead to actually reflect the intent described in the commit message. This way, the structure to use is selected at runtime and they can be kept as const. This is safer because modifying static structs that are shared between all instances like this, based on the properties of a single instance, is asking for trouble down the road. Fixes: b92f94f74826 ("iio: adc: ad9467: don't allow reading vref if not available") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/cc65da19e0578823d29e11996f86042e84d5715c.1733503146.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: at91: call input_free_device() on allocated iio_devJoe Hattori
Current implementation of at91_ts_register() calls input_free_deivce() on st->ts_input, however, the err label can be reached before the allocated iio_dev is stored to st->ts_input. Thus call input_free_device() on input instead of st->ts_input. Fixes: 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241207043045.1255409-1-joe@pf.is.s.u-tokyo.ac.jp Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ad7173: fix using shared static info structDavid Lechner
Fix a possible race condition during driver probe in the ad7173 driver due to using a shared static info struct. If more that one instance of the driver is probed at the same time, some of the info could be overwritten by the other instance, leading to incorrect operation. To fix this, make the static info struct const so that it is read-only and make a copy of the info struct for each instance of the driver that can be modified. Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: David Lechner <dlechner@baylibre.com> Tested-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://patch.msgid.link/20241127-iio-adc-ad7313-fix-non-const-info-struct-v2-1-b6d7022b7466@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()Fabio Estevam
Using gpiod_set_value() to control the reset GPIO causes some verbose warnings during boot when the reset GPIO is controlled by an I2C IO expander. As the caller can sleep, use the gpiod_set_value_cansleep() variant to fix the issue. Tested on a custom i.MX93 board with a ADS124S08 ADC. Cc: stable@kernel.org Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://patch.msgid.link/20241122164308.390340-1-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ti-ads1119: fix information leak in triggered bufferJavier Carrasco
The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: a9306887eba4 ("iio: adc: ti-ads1119: Add driver") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-2-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: pressure: zpa2326: fix information leak in triggered bufferJavier Carrasco
The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-3-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: rockchip_saradc: fix information leak in triggered bufferJavier Carrasco
The 'data' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 4e130dc7b413 ("iio: adc: rockchip_saradc: Add support iio buffers") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-4-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: imu: kmx61: fix information leak in triggered bufferJavier Carrasco
The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: c3a23ecc0901 ("iio: imu: kmx61: Add support for data ready triggers") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-5-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: light: vcnl4035: fix information leak in triggered bufferJavier Carrasco
The 'buffer' local array is used to push data to userspace from a triggered buffer, but it does not set an initial value for the single data element, which is an u16 aligned to 8 bytes. That leaves at least 4 bytes uninitialized even after writing an integer value with regmap_read(). Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: ec90b52c07c0 ("iio: light: vcnl4035: Fix buffer alignment in iio_push_to_buffers_with_timestamp()") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-6-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: light: bh1745: fix information leak in triggered bufferJavier Carrasco
The 'scan' local struct is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: eab35358aae7 ("iio: light: ROHM BH1745 colour sensor") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-7-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ti-ads8688: fix information leak in triggered bufferJavier Carrasco
The 'buffer' local array is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Initialize the array to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 61fa5dfa5f52 ("iio: adc: ti-ads8688: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-8-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered bufferJavier Carrasco
The 'data' array is allocated via kmalloc() and it is used to push data to user space from a triggered buffer, but it does not set values for inactive channels, as it only uses iio_for_each_active_channel() to assign new values. Use kzalloc for the memory allocation to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 415f79244757 ("iio: Move IIO Dummy Driver out of staging") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-9-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: test: Fix GTS test configMatti Vaittinen
The test config contained a copy-paste error. The IIO GTS helper test was errorneously titled as "Test IIO formatting functions" in the menuconfig. Change the title of the tests to reflect what is tested. Fixes: cf996f039679 ("iio: test: test gain-time-scale helpers") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/Z0gt5R86WdeK73u2@mva-rohm Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ti-ads1298: Add NULL check in ads1298_initCharles Han
devm_kasprintf() can return a NULL pointer on failure. A check on the return value of such a call in ads1298_init() is missing. Add it. Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://patch.msgid.link/20241118090208.14586-1-hanchunchao@inspur.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: stm32-dfsdm: handle label as an optional propertyOlivier Moysan
The label property is defined as optional in the DFSDM binding. Parse the label property only when it is defined in the device tree. Fixes: 3208fa0cd919 ("iio: adc: stm32-dfsdm: adopt generic channels bindings") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://patch.msgid.link/20241114102459.2497178-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: adc: ad4695: fix buffered read, single sample timingsTrevor Gamblin
Modify ad4695_buffer_preenable() by adding an extra SPI transfer after each data read to help ensure that the timing requirement between the last SCLK rising edge and the next CNV rising edge is met. This requires a restructure of the buf_read_xfer array in ad4695_state. Also define AD4695_T_SCK_CNV_DELAY_NS to use for each added transfer. Without this change it is possible for the data to become corrupted on sequential buffered reads due to the device not properly exiting conversion mode. Similarly, make adjustments to ad4695_read_one_sample() so that timings are respected, and clean up the function slightly in the process. Fixes: 6cc7e4bf2e08 ("iio: adc: ad4695: implement triggered buffer") Co-developed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Tested-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241113-tgamblin-ad4695_improvements-v2-1-b6bb7c758fc4@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: imu: inv_icm42600: fix timestamps after suspend if sensor is onJean-Baptiste Maneyrol
Currently suspending while sensors are one will result in timestamping continuing without gap at resume. It can work with monotonic clock but not with other clocks. Fix that by resetting timestamping. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241113-inv_icm42600-fix-timestamps-after-suspend-v1-1-dfc77c394173@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: imu: inv_icm42600: fix spi burst write not supportedJean-Baptiste Maneyrol
Burst write with SPI is not working for all icm42600 chips. It was only used for setting user offsets with regmap_bulk_write. Add specific SPI regmap config for using only single write with SPI. Fixes: 9f9ff91b775b ("iio: imu: inv_icm42600: add SPI driver for inv_icm42600 driver") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241112-inv-icm42600-fix-spi-burst-write-not-supported-v2-1-97690dc03607@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: gyro: fxas21002c: Fix missing data update in trigger handlerCarlos Song
The fxas21002c_trigger_handler() may fail to acquire sample data because the runtime PM enters the autosuspend state and sensor can not return sample data in standby mode.. Resume the sensor before reading the sample data into the buffer within the trigger handler. After the data is read, place the sensor back into the autosuspend state. Fixes: a0701b6263ae ("iio: gyro: add core driver for fxas21002c") Signed-off-by: Carlos Song <carlos.song@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20241116152945.4006374-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-12 08:37:00 +0000