summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-14wifi: iwlwifi: mld: remove support for iwl_geo_tx_power_profiles_cmd version 4Miri Korenblit
iwlmld was planned to be used for HR/GF, which has version 4, but it was decided at the end to use iwlmvm for HR/GF, so iwlmld only needs to support version 5. Remove version 4 support. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.faeb1e6bac2a.I1a29b16f59b67c103d1f91dedee27e04cd7fdfdd@changeid
2025-07-14wifi: iwlwifi: remove an unused structMiri Korenblit
iwl_reduce_tx_power_cmd is not used anywhere, remove it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.313285673570.I87c646f8b9b83d63c7c6c293cc5d454c32d852c2@changeid
2025-07-14wifi: iwlwifi: mld: remove support for REDUCE_TX_POWER_CMD ver 9Miri Korenblit
iwlmld was planned to be used for HR, which has version 9, but it was decided at the end to use iwlmvm for HR, so iwlmld only needs to support version 10. Remove version 9 support. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.aeeb617abfae.I05101972506180644c42be5096c1b2afa36c625a@changeid
2025-07-14wifi: iwlwifi: mvm: remove support for REDUCE_TX_POWER_CMD ver 6 and 7Miri Korenblit
These versions are no longer used in any of our devices. Remove them. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.05fabbda0a2f.Id55eeb4f337eb52163621ca202d97a3539bf3f53@changeid
2025-07-14wifi: iwlwifi: mvm: Add dump handler to iwl_mvmPagadala Yesu Anjaneyulu
Implement a dump handler in the iwl_mvm operation mode to collect firmware dump upon trigger from trans layer. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.366fc31fd551.I976cb17edd85a461043c7a4c7f4895bfaec9174a@changeid
2025-07-14wifi: iwlwifi: mvm/mld: use average RSSI for beaconsJohannes Berg
When connected to an AP, the PHY will typically be tuned to a higher bandwidth than the beacons are transmitted on, as they are normally only transmitted on 20 MHz. This can mean that another STA is simultaneously transmitting on another channel of the higher bandwidth, and apparently this energy may be taken into account by the PHY, resulting in elevated energy readings. To work around this, track the firmware's corrected beacon energy data and replace the RSSI in beacons by that. The replacement happens for all beacons received in the context of the current MAC or link (depending on FW version), in which case the filters will drop all else. For a scan, which is only tuning to 20 MHz channels, the MAC/link ID will be one that isn't found (the AUX ID 4), and no correction will be done (nor is it needed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.324bfe7027ff.I160f947e7aab30e0110a7019ed46186e57c3de14@changeid
2025-07-14wifi: iwlwifi: mvm: remove extra link IDJohannes Berg
Since the iwlmvm driver now only supports pre-MLO devices, we no longer need to maintain an extra explicit link ID; valid MAC IDs and link IDs are both in the range 0-3 and the driver always has a 1:1 MAC/link correspondence. Thus, simply use the MAC ID as the link ID as well. This simplifies some further work because on RX the ID is given but there is some confusion about which versions of the firmware report MAC and which report link ID. While at it, clarify iwl_mvm_handle_missed_beacons_notif() code a bit so it doesn't look like an invalid vif pointer is being used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.005aa5fe34fe.Ib0c1187453f46ce49dc0f9f58907ee21f5b52634@changeid
2025-07-14wifi: iwlwifi: mvm: remove IWL_MVM_ESR_EXIT_FAIL_ENTRYPagadala Yesu Anjaneyulu
EHT capable devices will only use iwlmld. So we can remove EMLSR code from iwlmvm. As part of removal, remove IWL_MVM_ESR_EXIT_FAIL_ENTRY EMLSR state. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250711183056.a69dc9c6ba49.I7f9fbc1f954b4c118625a4b8d51c72f3c84936da@changeid
2025-07-14drm/panfrost: Fix scheduler workqueue bugPhilipp Stanner
When the GPU scheduler was ported to using a struct for its initialization parameters, it was overlooked that panfrost creates a distinct workqueue for timeout handling. The pointer to this new workqueue is not initialized to the struct, resulting in NULL being passed to the scheduler, which then uses the system_wq for timeout handling. Set the correct workqueue to the init args struct. Cc: stable@vger.kernel.org # 6.15+ Fixes: 796a9f55a8d1 ("drm/sched: Use struct for drm_sched_init() params") Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Closes: https://lore.kernel.org/dri-devel/b5d0921c-7cbf-4d55-aa47-c35cd7861c02@igalia.com/ Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250709102957.100849-2-phasta@kernel.org
2025-07-14wifi: ath12k: Add support to enqueue management frame at MLD levelSriram R
A multi-link client can use any link for transmissions. It can decide to put one link in power save mode for longer periods while listening on the other links as per MLD listen interval. Unicast management frames sent to that link station might get dropped if that link station is in power save mode or inactive. In such cases, firmware can take decision on which link to use. Allow the firmware to decide on which link management frame should be sent on, by filling the hardware link with maximum value of u32, so that the firmware will not have a specific link to transmit data on and so the management frames will be link agnostic. For QCN devices, all action frames are marked as link agnostic. For WCN devices, if the device is configured as an AP, then all frames other than probe response frames, authentication frames, association response frames, re-association response frames and ADDBA response frames are marked as link agnostic and if the device is configured as a station, then all frames other than probe request frames, authentication frames, de-authentication frames and ADDBA response frames are marked as link agnostic. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250711091704.3704379-1-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-14wifi: ath12k: Enable memory profile selection for QCN9274Aaradhana Sahu
The QCN9274 supports two memory profiles: a default profile and a low-memory profile. The driver signals the firmware to enable low-memory optimizations using the QMI initialization service. Add support to select the low-memory profile on system with less than 512 MB RAM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250708181102.4111054-5-aaradhana.sahu@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-14wifi: ath12k: Refactor macros to use memory profile-based valuesAaradhana Sahu
Refactor macros to compute values dynamically at runtime based on the ath12k_mem_profile_based_param structure. Remove hardcoded logic to allow driver to operate more efficiently in memory-constrained platforms without significant functional impact. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250708181102.4111054-4-aaradhana.sahu@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-14wifi: ath12k: Remove redundant TID calculation for QCN9274Aaradhana Sahu
Currently, host sends num_tids (number of TID (Traffic Identifier)) value to firmware via WMI_INIT_CMD during WMI initialization. However, the firmware does not use this value, as it determines the number of TIDs using its own internal logic. Hence, remove the redundant num_tids calculation logic for QCN9274. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250708181102.4111054-3-aaradhana.sahu@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-14wifi: ath12k: Add a table of parameters entries impacting memory consumptionAaradhana Sahu
Introduce ath12k_mem_profile_based_param structure to define configuration parameters for both default and low-memory profiles. Add support for enabling the low-memory profile in the follow-up patch by making the following changes: - Reduce sizes for transmit, receive, and monitor descriptor rings. - Reduce transmit and receive descriptor count. - Limit the maximum number of virtual devices (vdevs) to 9. - Reduce the maximum number of client support per radio. Centralize these parameters in the ath12k_mem_profile_based_param structure to simplify switching between memory profiles. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.5-01651-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250708181102.4111054-2-aaradhana.sahu@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-14nvme: fix endianness of command word prints in nvme_log_err_passthru()John Garry
The command word members of struct nvme_common_command are __le32 type, so use helper le32_to_cpu() to read them properly. Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging") Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-07-14nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()Zheng Qixing
When inserting a namespace into the controller's namespace list, the function uses list_add_rcu() when the namespace is inserted in the middle of the list, but falls back to a regular list_add() when adding at the head of the list. This inconsistency could lead to race conditions during concurrent access, as users might observe a partially updated list. Fix this by consistently using list_add_rcu() in both code paths to ensure proper RCU protection throughout the entire function. Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list") Signed-off-by: Zheng Qixing <zhengqixing@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2025-07-14spi: Add check for 8-bit transfer with 8 IO mode supportCheng Ming Lin
The current SPI framework does not verify if the SPI device supports 8 IO mode when doing an 8-bit transfer. This patch adds a check to ensure that if the transfer tx_nbits or rx_nbits is 8, the SPI mode must support 8 IO. If not, an error is returned, preventing undefined behavior. Fixes: d6a711a898672 ("spi: Fix OCTAL mode support") Cc: stable@vger.kernel.org Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw> Link: https://patch.msgid.link/20250714031023.504752-1-linchengming884@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-14cpuidle: psci: Fix cpuhotplug routine with PREEMPT_RT=yDaniel Lezcano
Currently cpu hotplug with the PREEMPT_RT option set in the kernel is not supported because the underlying generic power domain functions used in the cpu hotplug callbacks are incompatible from a lock point of view. This situation prevents the suspend to idle to reach the deepest idle state for the "cluster" as identified in the undermentioned commit. Use the compatible ones when PREEMPT_RT is enabled and remove the boolean disabling the hotplug callbacks with this option. With this change the platform can reach the deepest idle state allowing at suspend time to consume less power. Tested-on Lenovo T14s with the following script: echo 0 > /sys/devices/system/cpu/cpu3/online BEFORE=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }') ; rtcwake -s 1 -m mem; AFTER=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }'); if [ $BEFORE -lt $AFTER ]; then echo "Test successful" else echo "Test failed" fi echo 1 > /sys/devices/system/cpu/cpu3/online Fixes: 1c4b2932bd62 ("cpuidle: psci: Enable the hierarchical topology for s2idle on PREEMPT_RT") Cc: Raghavendra Kakarla <quic_rkakarla@quicinc.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250709154728.733920-1-daniel.lezcano@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-07-13net: dsa: mt7530: Constify struct regmap_configChristophe JAILLET
'struct regmap_config' are not modified in these drivers. They be statically defined instead of allocated and populated at run-time. The main benefits are: - it saves some memory at runtime - the structures can be declared as 'const', which is always better for structures that hold some function pointers - the code is less verbose Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-13Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Fixes for a few clk drivers and bindings: - Add a missing property to the Mediatek MT8188 clk binding to keep binding checks happy - Avoid an OOB by setting the correct number of parents in dispmix_csr_clk_dev_data - Allocate clk_hw structs early in probe to avoid an ordering issue where clk_parent_data points to an unallocated clk_hw when the child clk is registered before the parent clk in the SCMI clk driver * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: dt-bindings: clock: mediatek: Add #reset-cells property for MT8188 clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data clk: scmi: Handle case where child clocks are initialized before their parents
2025-07-13Merge tag 'irq_urgent_for_v6.16_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Fix a case of recursive locking in the MSI code - Fix a randconfig build failure in armada-370-xp irqchip * tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-msi-lib: Fix build with PCI disabled PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
2025-07-13nvmem: imx-ocotp: fix MAC address byte lengthSteffen Bätz
The commit "13bcd440f2ff nvmem: core: verify cell's raw_len" caused an extension of the "mac-address" cell from 6 to 8 bytes due to word_size of 4 bytes. This led to a required byte swap of the full buffer length, which caused truncation of the mac-address when read. Previously, the mac-address was incorrectly truncated from 70:B3:D5:14:E9:0E to 00:00:70:B3:D5:14. Fix the issue by swapping only the first 6 bytes to correctly pass the mac-address to the upper layers. Fixes: 13bcd440f2ff ("nvmem: core: verify cell's raw_len") Cc: stable@vger.kernel.org Signed-off-by: Steffen Bätz <steffen@innosonix.de> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250712181729.6495-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-13usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHYMinas Harutyunyan
For UTMI+ PHY, according to programming guide, first should be set PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues Remote Wakeup, then host notices disconnect instead. For ULPI PHY, above mentioned bits must be set in reversed order: STOPPCLK then PMUACTV. Fixes: 4483ef3c1685 ("usb: dwc2: Add hibernation updates for ULPI PHY") Cc: stable <stable@kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/692110d3c3d9bb2a91cedf24528a7710adc55452.1751881374.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-13usb: dwc3: qcom: Don't leave BCR assertedKrishna Kurapati
Leaving the USB BCR asserted prevents the associated GDSC to turn on. This blocks any subsequent attempts of probing the device, e.g. after a probe deferral, with the following showing in the log: [ 1.332226] usb30_prim_gdsc status stuck at 'off' Leave the BCR deasserted when exiting the driver to avoid this issue. Cc: stable <stable@kernel.org> Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-13HID: core: do not bypass hid_hw_raw_requestBenjamin Tissoires
hid_hw_raw_request() is actually useful to ensure the provided buffer and length are valid. Directly calling in the low level transport driver function bypassed those checks and allowed invalid paramto be used. Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250710-report-size-null-v2-3-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-07-13HID: core: ensure __hid_request reserves the report ID as the first byteBenjamin Tissoires
The low level transport driver expects the first byte to be the report ID, even when the report ID is not use (in which case they just shift the buffer). However, __hid_request() whas not offsetting the buffer it used by one in this case, meaning that the raw_request() callback emitted by the transport driver would be stripped of the first byte. Note: this changes the API for uhid devices when a request is made through hid_hw_request. However, several considerations makes me think this is fine: - every request to a HID device made through hid_hw_request() would see that change, but every request made through hid_hw_raw_request() already has the new behaviour. So that means that the users are already facing situations where they might have or not the first byte being the null report ID when it is 0. We are making things more straightforward in the end. - uhid is mainly used for BLE devices - uhid is also used for testing, but I don't see that change a big issue - for BLE devices, we can check which kernel module is calling hid_hw_request() - and in those modules, we can check which are using a Bluetooth device - and then we can check if the command is used with a report ID or not. - surprise: none of the kernel module are using a report ID 0 - and finally, bluez, in its function set_report()[0], does the same shift if the report ID is 0 and the given buffer has a size > 0. [0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879 Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43 Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com Fixes: 4fa5a7f76cc7 ("HID: core: implement generic .request()") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-07-13HID: core: ensure the allocated report buffer can contain the reserved report IDBenjamin Tissoires
When the report ID is not used, the low level transport drivers expect the first byte to be 0. However, currently the allocated buffer not account for that extra byte, meaning that instead of having 8 guaranteed bytes for implement to be working, we only have 7. Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/ Cc: stable@vger.kernel.org Suggested-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20250710-report-size-null-v2-1-ccf922b7c4e5@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-07-13RDMA/mlx5: Fix UMR modifying of mkey page sizeEdward Srouji
When changing the page size on an mkey, the driver needs to set the appropriate bits in the mkey mask to indicate which fields are being modified. The 6th bit of a page size in mlx5 driver is considered an extension, and this bit has a dedicated capability and mask bits. Previously, the driver was not setting this mask in the mkey mask when performing page size changes, regardless of its hardware support, potentially leading to an incorrect page size updates. This fixes the issue by setting the relevant bit in the mkey mask when performing page size changes on an mkey and the 6th bit of this field is supported by the hardware. Fixes: cef7dde8836a ("net/mlx5: Expand mkey page size to support 6 bits") Signed-off-by: Edward Srouji <edwards@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://patch.msgid.link/9f43a9c73bf2db6085a99dc836f7137e76579f09.1751979184.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-07-11Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: cleanups and preparation for live migration Jake Keller says: Various cleanups and preparation to the ice driver code for supporting SR-IOV live migration. The logic for unpacking Rx queue context data is added. This is the inverse of the existing packing logic. Thanks to <linux/packing.h> this is trivial to add. Code to enable both reading and writing the Tx queue context for a queue over a shared hardware register interface is added. Thanks to ice_adapter, this is locked across all PFs that need to use it, preventing concurrency issues with multiple PFs. The RSS hash configuration requested by a VF is cached within the VF structure. This will be used to track and restore the same configuration during migration load. ice_sriov_set_msix_vec_count() is updated to use pci_iov_vf_id() instead of open-coding a worse equivalent, and checks to avoid rebuilding MSI-X if the current request is for the existing amount of vectors. A new ice_get_vf_by_dev() helper function is added to simplify accessing a VF from its PCI device structure. This will be used more heavily within the live migration code itself. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: introduce ice_get_vf_by_dev() wrapper ice: avoid rebuilding if MSI-X vector count is unchanged ice: use pci_iov_vf_id() to get VF ID ice: expose VF functions used by live migration ice: move ice_vsi_update_l2tsel to ice_lib.c ice: save RSS hash configuration for migration ice: add functions to get and set Tx queue context ice: add support for reading and unpacking Rx queue context ==================== Link: https://patch.msgid.link/20250710214518.1824208-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge tag 'pci-v6.16-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Track apple Root Ports explicitly and look up the driver data from the struct device instead of using dev->driver_data, which is used by pci_host_common_init() for the generic host bridge pointer (Marc Zyngier) - Set dev->driver_data before pci_host_common_init() calls gen_pci_init() because some drivers need it to set up ECAM mappings; this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven) - Revert the now-unnecessary use of ECAM pci_config_window.priv to store a copy of dev->driver_data (Marc Zyngier) * tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device" PCI: host-generic: Set driver_data before calling gen_pci_init() PCI: apple: Add tracking of probed root ports
2025-07-11Merge tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Simona Vetter: "Cross-subsystem Changes: - agp/amd64 binding dmesg noise regression fix Core Changes: - fix race in gem_handle_create_tail - fixup handle_count fb refcount regression from -rc5, popular with reports ... - call rust dtor for drm_device release Driver Changes: - nouveau: magic 50ms suspend fix, acpi leak fix - tegra: dma api error in nvdec - pvr: fix device reset - habanalbs maintainer update - intel display: fix some dsi mipi sequences - xe fixes: SRIOV fixes, small GuC fixes, disable indirect ring due to issues, compression fix for fragmented BO, doc update * tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernel: (22 commits) drm/xe/guc: Default log level to non-verbose drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VF drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2 drm/xe/pm: Correct comment of xe_pm_set_vram_threshold() drm/xe: Release runtime pm for error path of xe_devcoredump_read() drm/xe/pm: Restore display pm if there is error after display suspend drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too drm/gem: Fix race in drm_gem_handle_create_tail() drm/framebuffer: Acquire internal references on GEM handles agp/amd64: Check AGP Capability before binding to unsupported devices drm/xe/bmg: fix compressed VRAM handling Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2" drm/xe: Allocate PF queue size on pow2 boundary drm/xe/pf: Clear all LMTT pages on alloc drm/nouveau/gsp: fix potential leak of memory used during acpi init rust: drm: remove unnecessary imports MAINTAINERS: Change habanalabs maintainer drm/imagination: Fix kernel crash when hard resetting the GPU drm/tegra: nvdec: Fix dma_alloc_coherent error check rust: drm: device: drop_in_place() the drm::Device in release() ...
2025-07-11net: ll_temac: Fix incorrect PHY node reference in debug messageAlok Tiwari
In temac_probe(), the debug message intended to print the resolved PHY node was mistakenly using the controller node temac_np instead of the actual PHY node lp->phy_node. This patch corrects the log to reference the correct device tree node. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710183737.2385156-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: netdevsim: Support setting dev->perm_addr on port creationToke Høiland-Jørgensen
Network management daemons that match on the device permanent address currently have no virtual interface types to test against. NetworkManager, in particular, has carried an out of tree patch to set the permanent address on netdevsim devices to use in its CI for this purpose. To support this use case, support setting netdev->perm_addr when creating a netdevsim port. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20250710-netdevsim-perm_addr-v4-1-c9db2fecf3bf@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11sfc: falcon: refactor and document ef4_ethtool_get_rxfh_fieldsEdward Cree
The code had some rather odd control flow inherited from when it was shared with siena and ef10 before this driver was split out. Simplify that for easier reading. Also add a comment explaining why we return the values we do, since some Falcon documents and datasheets confusingly mention the part supporting 4-tuple UDP hashing. (I couldn't find any record of exactly what was "broken" about the original Falcon A hash, I'm just trusting that falcon_init_rx_cfg() had a good reason for not using it.) Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250710173213.1638397-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11net: emaclite: Fix missing pointer increment in aligned_read()Alok Tiwari
Add missing post-increment operators for byte pointers in the loop that copies remaining bytes in xemaclite_aligned_read(). Without the increment, the same byte was written repeatedly to the destination. This update aligns with xemaclite_aligned_write() Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20250710173849.2381003-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11eth: fbnic: fix ubsan complaints about OOB accessesJakub Kicinski
UBSAN complains that we reach beyond the end of the log entry: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/meta/fbnic/fbnic_fw_log.c:94:50 index 71 is out of range for type 'char [*]' Call Trace: <TASK> ubsan_epilogue+0x5/0x2b fbnic_fw_log_write+0x120/0x960 fbnic_fw_parse_logs+0x161/0x210 We're just taking the address of the character after the array, so this really seems like something that should be legal. But whatever, easy enough to silence by doing direct pointer math. Fixes: c2b93d6beca8 ("eth: fbnic: Create ring buffer for firmware logs") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250709205910.3107691-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11virtio_net: simplify tx queue wake condition checkLiming Wu
Consolidate the two nested if conditions for checking tx queue wake conditions into a single combined condition. This improves code readability without changing functionality. And move netif_tx_wake_queue into if condition to reduce unnecessary checks for queue stops. Signed-off-by: Liming Wu <liming.wu@jaguarmicro.com> Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250710023208.846-1-liming.wu@jaguarmicro.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2). No conflicts. Adjacent changes: drivers/net/wireless/mediatek/mt76/mt7925/mcu.c c701574c5412 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan") b3a431fe2e39 ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()") drivers/net/wireless/mediatek/mt76/mt7996/mac.c 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()") dc66a129adf1 ("wifi: mt76: add a wrapper for wcid access with validation") drivers/net/wireless/mediatek/mt76/mt7996/main.c 3dd6f67c669c ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()") 8989d8e90f5f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()") net/mac80211/cfg.c 58fcb1b4287c ("wifi: mac80211: reject VHT opmode for unsupported channel widths") 037dc18ac3fb ("wifi: mac80211: add support for storing station S1G capabilities") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-11drm/nouveau: check ioctl command codes betterArnd Bergmann
nouveau_drm_ioctl() only checks the _IOC_NR() bits in the DRM_NOUVEAU_NVIF command, but ignores the type and direction bits, so any command with '7' in the low eight bits gets passed into nouveau_abi16_ioctl() instead of drm_ioctl(). Check for all the bits except the size that is handled inside of the handler. Fixes: 27111a23d01c ("drm/nouveau: expose the full object/event interfaces to userspace") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [ Fix up two checkpatch warnings and a typo. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250711072458.2665325-1-arnd@kernel.org
2025-07-11Merge tag 'block-6.16-20250710' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - MD changes via Yu: - fix UAF due to stack memory used for bio mempool (Jinchao) - fix raid10/raid1 nowait IO error path (Nigel and Qixing) - fix kernel crash from reading bitmap sysfs entry (Håkon) - Fix for a UAF in the nbd connect error path - Fix for blocksize being bigger than pagesize, if THP isn't enabled * tag 'block-6.16-20250710' of git://git.kernel.dk/linux: block: reject bs > ps block devices when THP is disabled nbd: fix uaf in nbd_genl_connect() error path md/md-bitmap: fix GPF in bitmap_get_stats() md/raid1,raid10: strip REQ_NOWAIT from member bios raid10: cleanup memleak at raid10_make_request md/raid1: Fix stack memory use after return in raid1_reshape
2025-07-11Merge tag 'net-6.16-rc6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski "Big chunk of fixes for WiFi, Johannes says probably the last for the release. The Netlink fixes (on top of the tree) restore operation of iw (WiFi CLI) which uses sillily small recv buffer, and is the reason for this 'emergency PR'. The GRE multicast fix also stands out among the user-visible regressions. Current release - fix to a fix: - netlink: make sure we always allow at least one skb to be queued, even if the recvbuf is (mis)configured to be tiny Previous releases - regressions: - gre: fix IPv6 multicast route creation Previous releases - always broken: - wifi: prevent A-MSDU attacks in mesh networks - wifi: cfg80211: fix S1G beacon head validation and detection - wifi: mac80211: - always clear frame buffer to prevent stack leak in cases which hit a WARN() - fix monitor interface in device restart - wifi: mwifiex: discard erroneous disassoc frames on STA interface - wifi: mt76: - prevent null-deref in mt7925_sta_set_decap_offload() - add missing RCU annotations, and fix sleep in atomic - fix decapsulation offload - fixes for scanning - phy: microchip: improve link establishment and reset handling - eth: mlx5e: fix race between DIM disable and net_dim() - bnxt_en: correct DMA unmap len for XDP_REDIRECT" * tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netlink: make sure we allow at least one dump skb netlink: Fix rmem check in netlink_broadcast_deliver(). bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT bnxt_en: Flush FW trace before copying to the coredump bnxt_en: Fix DCB ETS validation net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam() net/mlx5e: Add new prio for promiscuous mode net/mlx5e: Fix race between DIM disable and net_dim() net/mlx5: Reset bw_share field when changing a node's parent can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level selftests: net: lib: fix shift count out of range selftests: Add IPv6 multicast route generation tests for GRE devices. gre: Fix IPv6 multicast route creation. net: phy: microchip: limit 100M workaround to link-down events on LAN88xx net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof net: appletalk: Fix device refcount leak in atrtr_create() netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto() wifi: mac80211: add the virtual monitor after reconfig complete wifi: mac80211: always initialize sdata::key_list ...
2025-07-11Merge tag 'gpio-fixes-for-v6.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix performance regression when setting values of multiple GPIO lines at once - make sure the GPIO OF xlate code doesn't end up passing an uninitialized local variable to GPIO core - update MAINTAINERS * tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: remove bouncing address for Nandor Han gpio: of: initialize local variable passed to the .of_xlate() callback gpiolib: fix performance regression when using gpio_chip_get_multiple()
2025-07-11wifi: ath12k: support average ack rssi in station dumpSivashankari Madhavan
Currently, the ACK RSSI value is not shown in station dump. Enable WMI resource flag for ACK RSSI in WMI INIT command to add ACK RSSI value in management TX completion event from WMI. Update ACK RSSI value obtained in management and data frame completion path to ieee80211_tx_info. Also advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag during hardware register to mac80211 layer so that ACK RSSI is added to station dump message. Example output : Station aa:bb:cc:dd:ee:ff (on wlp88s0) inactive time: 46584 ms rx bytes: 955 rx packets: 10 tx bytes: 769 tx packets: 6 tx retries: 81 tx failed: 0 rx drop misc: 0 signal: -39 dBm signal avg: -40 dBm tx bitrate: 6.0 MBit/s tx duration: 1185 us rx bitrate: 309.7 MBit/s 40MHz HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0 rx duration: 0 us last ack signal:-41 dBm avg ack signal: -40 dBm authorized: yes authenticated: yes ....... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sivashankari Madhavan <quic_sivamadh@quicinc.com> Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250709133554.622463-1-quic_ssreeela@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-11Merge tag 'pm-6.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a coding mistake in a previous fix related to system suspend and hibernation merged recently" * tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
2025-07-11platform/x86: dell-lis3lv02d: Add Precision 3551Jan-Niklas Burfeind
This marks 0x29 as accelerometer address on Dell Precision 3551. I followed previous works of Paul Menzel and Hans de Goede to verify it: $ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4 $ ls -d i2c-? i2c-0 $ sudo modprobe i2c-dev $ sudo i2cdetect 0 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0. I will probe address range 0x08-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- 30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- $ echo lis3lv02d 0x29 > sudo tee /sys/bus/i2c/devices/i2c-0/new_device lis3lv02d 0x29 $ sudo dmesg [ 0.000000] Linux version 6.12.28 (nixbld@localhost) (gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP PREEMPT_DYNAMIC Fri May 9 07:50:53 UTC 2025 [...] [ 0.000000] DMI: Dell Inc. Precision 3551/07YHW8, BIOS 1.18.0 10/03/2022 [...] [ 3749.077624] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator [ 3749.077732] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator [ 3749.098674] lis3lv02d: 8 bits 3DC sensor found [ 3749.182480] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28 [ 3749.182899] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29 Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20250710190919.37842-1-kernel@aiyionpri.me Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-11platform/x86: alieneware-wmi-wmax: Add AWCC support to more laptopsKurt Borja
Add support to Alienware Area-51m and Alienware m15 R5. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250710-m15_r5-v1-1-2c6ad44e5987@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-11platform/x86: Fix initialization order for firmware_attributes_classTorsten Hilbrich
The think-lmi driver uses the firwmare_attributes_class. But this class is registered after think-lmi, causing the "think-lmi" directory in "/sys/class/firmware-attributes" to be missing when the driver is compiled as builtin. Fixes: 55922403807a ("platform/x86: think-lmi: Directly use firmware_attributes_class") Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-11platform: arm64: huawei-gaokun-ec: fix OF node leakJohan Hovold
Make sure to drop the OF node reference taken when creating the Gaokun auxiliary devices when the devices are later released. Fixes: 7636f090d02e ("platform: arm64: add Huawei Matebook E Go EC driver") Cc: Pengyu Luo <mitltlatltl@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com> Link: https://lore.kernel.org/r/20250708085358.15657-1-johan@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-11wifi: iwlwifi: add support for accepting raw DSM tables by firmwarePagadala Yesu Anjaneyulu
Firmware would assert on undefined bits in DSM-originated DWs. With this change, Firmware introduces a fail-safe mechanism and removes the assert behavior. This ensures robustness when handling raw DSM table data. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
2025-07-11wifi: iwlwifi: pcie: don't WARN on bad firmware inputJohannes Berg
Don't WARN, which results in a useless backtrace, but just use IWL_FW_CHECK() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250710212632.4aedc0979beb.I3bd4d4296c7245261651603708456b7c67f55539@changeid
generated by cgit (git 2.34.1) at 2025-09-14 22:34:22 +0000