summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-24iavf: use libie adminq descriptorsMichal Swiatkowski
Use libie_aq_desc instead of iavf_aq_desc. Do needed changes to allow clean build Use libie_aq_raw() wherever it can be used. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24i40e: use libie adminq descriptorsMichal Swiatkowski
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow clean build. Get version descriptor is a little less detailed on i40e. To not mess up with shifting or union inside libie desc use get version descriptor from i40e. Move additional caps for i40e to libie. Fix RCT in declaration that is using libie_aq_desc; Use libie_aq_raw() wherever it can be used. The libie aq error is extended, cover it in ice driver just to clean build. In next patches the libie code for that will be used in each of intel driver. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24ixgbe: use libie adminq descriptorsMichal Swiatkowski
Use libie_aq_desc instead of ixgbe_aci_desc. Do needed changes to allow clean build. Move additional caps used in ixgbe to libie. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24ice, libie: move generic adminq descriptors to libMichal Swiatkowski
The descriptor structure is the same in ice, ixgbe and i40e. Move it to common libie header to use it across different driver. Leave device specific adminq commands in separate folders. This lead to a change that need to be done in filling/getting descriptor: - previous: struct specific_desc *cmd; cmd = &desc.params.specific_desc; - now: struct specific_desc *cmd; cmd = libie_aq_raw(&desc); Do this changes across the driver to allow clean build. The casting only have to be done in case of specific descriptors, for generic one union can still be used. Changes beside code moving: - change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too) - remove shift variables not otherwise needed (in libie_aq_flags) - fill/get descriptor data based on desc.params.raw whenever the descriptor isn't defined in libie - move defines from the libie_aq_sth structure outside - add libie_aq_raw helper and use it instead of explicit casting Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-24Merge tag 'net-6.16-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and xfrm. The TI regression notified last week is actually on our net-next tree, it does not affect 6.16. We are investigating a virtio regression which is quite hard to reproduce - currently only our CI sporadically hits it. Hopefully it should not be critical, and I'm not sure that an additional week would be enough to solve it. Current release - fix to a fix: - sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class Previous releases - regressions: - xfrm: - set transport header to fix UDP GRO handling - delete x->tunnel as we delete x - eth: - mlx5: fix memory leak in cmd_exec() - i40e: when removing VF MAC filters, avoid losing PF-set MAC - gve: fix stuck TX queue for DQ queue format Previous releases - always broken: - can: fix NULL pointer deref of struct can_priv::do_set_mode - eth: - ice: fix a null pointer dereference in ice_copy_and_init_pkg() - ism: fix concurrency management in ism_cmd() - dpaa2: fix device reference count leak in MAC endpoint handling - icssg-prueth: fix buffer allocation for ICSSG Misc: - selftests: mptcp: increase code coverage" * tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) net: hns3: default enable tx bounce buffer when smmu enabled net: hns3: fixed vf get max channels bug net: hns3: disable interrupt when ptp init failed net: hns3: fix concurrent setting vlan filter issue s390/ism: fix concurrency management in ism_cmd() selftests: drv-net: wait for iperf client to stop sending MAINTAINERS: Add in6.h to MAINTAINERS selftests: netfilter: tone-down conntrack clash test can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class gve: Fix stuck TX queue for DQ queue format net: appletalk: Fix use-after-free in AARP proxy probe net: bcmasp: Restore programming of TX map vector register selftests: mptcp: connect: also cover checksum selftests: mptcp: connect: also cover alt modes e1000e: ignore uninitialized checksum word on tgp e1000e: disregard NVM checksum on tgp when valid checksum bit is not set ice: Fix a null pointer dereference in ice_copy_and_init_pkg() i40e: When removing VF MAC filters, only check PF-set MAC i40e: report VF tx_dropped with tx_errors instead of tx_discards ...
2025-07-24net: hns3: default enable tx bounce buffer when smmu enabledJijie Shao
The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24net: hns3: fixed vf get max channels bugJian Shen
Currently, the queried maximum of vf channels is the maximum of channels supported by each TC. However, the actual maximum of channels is the maximum of channels supported by the device. Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24net: hns3: disable interrupt when ptp init failedYonglong Liu
When ptp init failed, we'd better disable the interrupt and clear the flag, to avoid early report interrupt at next probe. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24net: hns3: fix concurrent setting vlan filter issueJian Shen
The vport->req_vlan_fltr_en may be changed concurrently by function hclge_sync_vlan_fltr_state() called in periodic work task and function hclge_enable_vport_vlan_filter() called by user configuration. It may cause the user configuration inoperative. Fixes it by protect the vport->req_vlan_fltr by vport_lock. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24s390/ism: fix concurrency management in ism_cmd()Halil Pasic
The s390x ISM device data sheet clearly states that only one request-response sequence is allowable per ISM function at any point in time. Unfortunately as of today the s390/ism driver in Linux does not honor that requirement. This patch aims to rectify that. This problem was discovered based on Aliaksei's bug report which states that for certain workloads the ISM functions end up entering error state (with PEC 2 as seen from the logs) after a while and as a consequence connections handled by the respective function break, and for future connection requests the ISM device is not considered -- given it is in a dysfunctional state. During further debugging PEC 3A was observed as well. A kernel message like [ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a is a reliable indicator of the stated function entering error state with PEC 2. Let me also point out that a kernel message like [ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery is a reliable indicator that the ISM function won't be auto-recovered because the ISM driver currently lacks support for it. On a technical level, without this synchronization, commands (inputs to the FW) may be partially or fully overwritten (corrupted) by another CPU trying to issue commands on the same function. There is hard evidence that this can lead to DMB token values being used as DMB IOVAs, leading to PEC 2 PCI events indicating invalid DMA. But this is only one of the failure modes imaginable. In theory even completely losing one command and executing another one twice and then trying to interpret the outputs as if the command we intended to execute was actually executed and not the other one is also possible. Frankly, I don't feel confident about providing an exhaustive list of possible consequences. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com> Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24ssb: use new GPIO line value setter callbacks for the second GPIO chipBartosz Golaszewski
Because the other chip is guarded in an unlikely ifdef, I missed it when converting this driver. Fix it now. Fixes: 757259db79fc ("ssb: use new GPIO line value setter callbacks") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250723141257.51412-1-brgl@bgdev.pl Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-24wifi: Fix typosBjorn Helgaas
Fix typos in comments and error messages. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250723201741.2908456-1-helgaas@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23Merge tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "This might just be part one, but I'm sending it a bit early as it has two sets of reverts for regressions, one is all the gem/dma-buf handling and another was a nouveau ioctl change. Otherwise there is an amdgpu fix, nouveau fix and a scheduler fix. If any other changes come in I'll follow up with another more usual Fri/Sat MR. gem: - revert all the dma-buf/gem changes as there as lifetime issues with them nouveau: - revert an ioctl change as it causes issues - fix NULL ptr on fermi bridge: - remove extra semicolon sched: - remove hang causing optimisation amdgpu: - fix garbage in cleared vram after resume" * tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel: drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe() Revert "drm/nouveau: check ioctl command codes better" drm/nouveau/nvif: fix null ptr deref on pre-fermi boards Revert "drm/gem-dma: Use dma_buf from GEM object instance" Revert "drm/gem-shmem: Use dma_buf from GEM object instance" Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance" Revert "drm/prime: Use dma_buf from GEM object instance" Revert "drm/etnaviv: Use dma_buf from GEM object instance" Revert "drm/vmwgfx: Use dma_buf from GEM object instance" Revert "drm/virtio: Use dma_buf from GEM object instance" drm/sched: Remove optimization that causes hang when killing dependent jobs drm/amdgpu: Reset the clear flag in buddy during resume
2025-07-23net: ti: icssg-prueth: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make icssg-prueth access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23mlx5: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mlx5 access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-11-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23idpf: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make idpf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-10-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23iavf: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make iavf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-9-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23octeontx2-pf: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make octeontx2-pf access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-8-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23net: fec: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make fec access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-7-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23mt76: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mt76 access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-6-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23netdevsim: access ->pp through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make netdevsim access ->pp through netmem_desc instead of page. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-5-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23netmem, mlx4: access ->pp_ref_count through netmem_desc instead of pageByungchul Park
To eliminate the use of struct page in page pool, the page pool users should use netmem descriptor and APIs instead. Make mlx4 access ->pp_ref_count through netmem_desc instead of page. While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(), that can be used to get netmem_desc from page only if it's a pp page. For now that netmem_desc overlays on page, it can be achieved by just casting, and use macro and _Generic to cover const casting as well. Plus, change page_pool_page_is_pp() to check for 'const struct page *' instead of 'struct page *' since it doesn't modify data and additionally covers const type. Signed-off-by: Byungchul Park <byungchul@sk.com> Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23vxlan: remove redundant conversion of vni in vxlan_nl2confWang Liang
The IFLA_VXLAN_ID data has been converted to local variable vni in vxlan_nl2conf(), there is no need to do it again when set conf->vni. Signed-off-by: Wang Liang <wangliang74@huawei.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250722093049.1527505-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-23netdevsim: add fw_update_flash_chunk_time_ms debugfs knobsJiri Pirko
Netdevsim emulates firmware update and it takes 5 seconds to complete. For some use cases, this is too long and unnecessary. Allow user to configure the time by exposing debugfs a knob to set chunk time. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-24Merge tag 'drm-misc-fixes-2025-07-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.16-rc8/final?: - Revert all uses of drm_gem_object->dmabuf to drm_gem_object->import_attach->dmabuf. - Fix amdgpu returning BIOS cluttered VRAM after resume. - Scheduler hang fix. - Revert nouveau ioctl fix as it caused regressions. - Fix null pointer deref in nouveau. - Fix unnecessary semicolon in ti_sn_bridge_probe. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/72235afd-c849-49fe-9cc1-2b1781abdf08@linux.intel.com
2025-07-23Bluetooth: btintel_pcie: Fix Alive Context State HandlingKiran K
The firmware raises an alive interrupt upon sending the HCI_RESET or BTINTEL_HCI_OP_RESET command. As part of handling the reset command, firmware initializes the hardware and data path and raises the alive interrupt. Upon receiving the alive interrupt, the driver must enable the data path and grant RX buffers to the firmware before sending any commands. The alive context maintained in the driver must be updated before sending BTINTEL_HCI_OP_RESET or HCI_OP_RESET to prevent a potential race condition where the context is also updated in the threaded IRQ. The issue was observed in a stress reboot usecase (1/25) using "sudo reboot" command where the firmware download was failing as the driver was not granting RX buffer to firmware due to race condition. Bluetooth: hci0: API lock is disabled Bluetooth: hci0: Debug lock is disabled Bluetooth: hci0: Minimum firmware build 1 week 10 2014 Bluetooth: hci0: Bootloader timestamp 2023.43 buildtype 1 build 11631 Bluetooth: hci0: Found device firmware: intel/ibt-00a0-00a1-iml.sfi Bluetooth: hci0: Boot Address: 0xb0301000 Bluetooth: hci0: Firmware Version: 167-12.25 Bluetooth: hci0: Waiting for firmware download to complete Bluetooth: hci0: Firmware loaded in 99902 usecs Bluetooth: hci0: Alive context: fw_dl old_boot_stage: 0xa0db0003 new_boot_stage: 0xa0db0003 Bluetooth: hci0: sent cmd: 0xfc01 alive context changed: fw_dl -> intel_reset1 Bluetooth: hci0: Waiting for device to boot Bluetooth: hci0: Device boot timeout Bluetooth: hci0: Firmware download retry count: 1 Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Make driver wait for alive interruptKiran K
The firmware raises an alive interrupt upon receiving the HCI_RESET or BTINTEL_HCI_OP_RESET (Intel reset - 0xfc01) command. This change fixes the driver to properly wait for the alive interrupt to avoid driver sending commands to firmware before it is ready to process. For details on the handshake between the driver and firmware, refer to commit 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware"). As the driver needs to handle two interrupts for HCI_OP_RESET and BTINTEL_HCI_OP_RESET, the firmware ensures that the TX completion interrupt is always followed by the alive interrupt. Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855Zijun Hu
Add one more part with ID (0x28de, 0x1401) to usb_device_id table for Qualcomm WCN6855, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=28de ProdID=1401 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Sort WCN6855 device IDs by VID and PIDZijun Hu
Sort WCN6855 device IDs to more easily manage them. Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: QCA: Support downloading custom-made firmwaresZijun Hu
There are custom-made firmwares based on board ID for a given QCA BT chip sometimes, and they are different with existing firmwares and put in a separate subdirectory to avoid conflict, for example: QCA2066, as a variant of WCN6855, has firmwares under 'qca/QCA2066/' of linux-firmware repository. Support downloading custom-made firmwares based on a table newly added. Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Add uevents for FW dump and FW download completeNeeraj Sanjay Kale
This adds uevents which will be generated whenever FW dump is triggered, FW dump is complete and FW (re)download is done. This feature is needed for IW612 chipset, which is a tri-radio chipset, where WLAN runs on CPU1 and BT and Zigbee runs on CPU2. Currently, whenever BT FW crashes, and FW dump is in progress, there is no way for 15.4 application to know that CPU2 is in bad state, and when it will be recovered. With the help of these uevents and udev rules, the 15.4 app, or any userspace application can be alerted whenever CPU2 goes in bad state and recoveres after BTNXPUART reloads the firmware. [ 334.255154] Bluetooth: hci0: ==== Start FW dump === [ 334.261003] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_ACTIVE === [ 351.486048] Bluetooth: hci0: ==== FW dump complete === [ 351.491356] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_DONE === [ 352.028974] Bluetooth: hci0: ChipID: 7601, Version: 0 [ 352.034490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [ 353.979977] Bluetooth: hci0: FW Download Complete: 417064 bytes [ 355.197222] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_READY === Tested this change by creating a simple udev rule to store the BTNXPUART_STATE value in a ~/<BTNXPUART_DEV>/state file, and running 15.4 traffic. The 15.4 packets were sent over SPI only when BTNXPUART_STATE was FW_READY. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dumpNeeraj Sanjay Kale
This adds proper handling for the independent reset command sent by the driver after FW dump is complete. In normal scenario, the independent reset vendor command gives a success response before jumping to bootcode. However, when FW goes in a bad state, and sends out FW dump packets, the independent reset command does not get any response from the controller. [ 159.807732] Bluetooth: hci0: ==== Start FW dump === [ 180.759060] Bluetooth: hci0: ==== FW dump complete === [ 182.779208] Bluetooth: hci0: command 0xfcfc tx timeout [ 183.364974] Bluetooth: hci0: ChipID: 7601, Version: 0 [ 183.368490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [ 184.679977] Bluetooth: hci0: FW Download Complete: 417064 bytes [ 187.963102] Bluetooth: hci0: Opcode 0x0c03 failed: -110 As a fix for such scenario, the independent reset vendor command is sent using the __hci_cmd_send() API, which does not expect any response for vendor commands. __hci_cmd_send is non blocking, so before the tx_work is scheduled, it sometimes gets canceled and 3F|FC command is never sent. Adding a small delay after __hci_cmd_send allows the command to be sent to the controller. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel: Define a macro for Intel Reset vendor commandKiran K
Use macro for Intel Reset command (0xfc01) instead of hard coded value. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: hci_bcm4377: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btrtl: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btmtk: Fix typo in log stringBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add new VID/PID 0489/e14e for MT7925En-Wei Wu
Add VID 0489 & PID e14e for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e14e Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add RTL8852BE device 0x13d3:0x3618Hao Li
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3618 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hao Li <lihao1@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Fix potential NULL dereference on kmalloc failureZhongqiu Han
Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly. Fixes: 7d70989fcea7 ("Bluetooth: btusb: Add HCI Drv commands for configuring altsetting") Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: implement powerup sequenceCatalin Popescu
NXP bluetooth chip shares power supply and reset gpio with a WLAN chip. Add support for power supply and reset and enforce powerup sequence: - apply power supply - deassert reset/powerdown Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Add support for 4M baudrateNeeraj Sanjay Kale
This adds support for 4000000 as secondary baudrate. This value is selected from device tree property "max-speed" which is then used to download FW chunks, and as operational baudrate after HCI initialization is done. Earlier, the secondary baudrate was fixed to 3000000 in driver, but now with "max-speed" property, this secondary baudrate can be set to 4000000. The secondary baudrate is set by the driver by sending a vendor command (3F 09) to the firmware, with secondary baudrate parameter, in nxp_post_init(). Any other value set for max-speed other than 3000000 or 4000000 will default to 3000000, which is supported by all legacy and new NXP chipsets. This feature is applicable for all new V3 bootloader chips and w8987 V1 bootloader chip. This property does not apply for w8997 compatible device, since it downloads a helper.bin FW file that sets secondary baudrate as 3000000 only. The switch to 4000000 baudrate is validated using a Saleae Logic Analyzer and imx8m-mini with AW693 M.2 module. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: hci_qca: Enable ISO data packet RXZijun Hu
Enable ISO data packet RX for LE audio. Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Add support for device 0x4d76Kiran K
lspci -v -k -d 8086:4d76 00:14.7 Bluetooth: Intel Corporation Device 4d76 Subsystem: Intel Corporation Device 0011 Flags: fast devsel, IRQ 255, IOMMU group 12 Memory at 13013328000 (64-bit, non-prefetchable) [disabled] [size=16K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [80] MSI-X: Enable- Count=32 Masked- Capabilities: [100] Latency Tolerance Reporting Kernel driver in use: btintel_pcie Kernel modules: btintel_pcie Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add a new VID/PID 2c7c/7009 for MT7925Haochen Tong
Adds a new entry with VID 2c7c and PID 7009 for MediaTek MT7925 Bluetooth chip. The device information from /sys/kernel/debug/usb/devices is provided below. T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7009 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Haochen Tong <i@hexchain.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Reword restart to recoveryLuiz Augusto von Dentz
This rewords the term restart with recovery since the intend is for hardware recovery not a regular restart, also remove some debug logs which might just clutter the output informing the recovery counter which isn't really useful for regular users. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Support Function level resetChandrashekar Devegowda
The driver supports Function Level Reset (FLR) to recover the controller upon hardware exceptions or hci command timeouts. FLR is triggered only when no prior reset has occurred within the retry window, with a maximum of one FLR allowed within this window. This patch is tested by, echo 1 > /sys/class/bluetooth/hciX/reset Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)Uwe Kleine-König
Teach the btusb driver to recognize another variant of the RTL8851BE bluetooth radio. /sys/kernel/debug/usb/devices reports for that device: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3601 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Reported-by: shdeb <shdeb3000000@gmail.com> Link: https://bugs.debian.org/1106386 Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB NanoZenm Chen
Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano which is based on a Realtek RTL8851BU chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=3625 ProdID=010b Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8851bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Zenm Chen <zenmchen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Merge tag 'iwlwifi-next-2025-07-23' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi feature, notably - disable features in fips - remove RX OMI feature code - A few fixes and cleanups ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 19:10:39 +0000