summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-19nfc: s3fwrn5: replace the assertion with a WARN_ONAditya Pakki
In s3fwrn5_fw_recv_frame, if fw_info->rsp is not empty, the current code causes a crash via BUG_ON. However, s3fwrn5_fw_send_msg does not crash in such a scenario. The patch replaces the BUG_ON by returning the error to the callers and frees up skb. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net: macb: fix probing of PHY not described in the dtAntoine Tenart
This patch fixes the case where the PHY isn't described in the device tree. This is due to the way the MDIO bus is registered in the driver: whether the PHY is described in the device tree or not, the bus is registered through of_mdiobus_register. The function masks all the PHYs and only allow probing the ones described in the device tree. Prior to the Phylink conversion this was also done but later on in the driver the MDIO bus was manually scanned to circumvent the fact that the PHY wasn't described. This patch fixes it in a proper way, by registering the MDIO bus based on if the PHY attached to a given interface is described in the device tree or not. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19of: mdio: export of_mdiobus_child_is_phyAntoine Tenart
This patch exports of_mdiobus_child_is_phy, allowing to check if a child node is a network PHY. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19scsi: target/iblock: Fix protection error with blocks greater than 512BIsrael Rukshin
The sector size of the block layer is 512 bytes, but integrity interval size might be different (in case of 4K block size of the media). At the initiator side the virtual start sector is the one that was originally submitted by the block layer (512 bytes) for the Reftag usage. The initiator converts the Reftag to integrity interval units and sends it to the target. So the target virtual start sector should be calculated at integrity interval units. prepare_fn() and complete_fn() don't remap correctly the Reftag when using incorrect units of the virtual start sector, which leads to the following protection error at the device: "blk_update_request: protection error, dev sdb, sector 2048 op 0x0:(READ) flags 0x10000 phys_seg 1 prio class 0" To fix that, set the seed in integrity interval units. Link: https://lore.kernel.org/r/1576078562-15240-1-git-send-email-israelr@mellanox.com Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()Varun Prakash
If cxgb4i_ddp_init() fails then cdev->cdev2ppm will be NULL, so add a check for NULL pointer before dereferencing it. Link: https://lore.kernel.org/r/1576676731-3068-1-git-send-email-varun@chelsio.com Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: lpfc: fix spelling mistakes of asynchronousColin Ian King
There are spelling mistakes of asynchronous in a lpfc_printf_log message and comments. Fix these. Link: https://lore.kernel.org/r/20191218084301.627555-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 269 insertions(+), 108 deletions(-). The main changes are: 1) Fix lack of synchronization between xsk wakeup and destroying resources used by xsk wakeup, from Maxim Mikityanskiy. 2) Fix pruning with tail call patching, untrack programs in case of verifier error and fix a cgroup local storage tracking bug, from Daniel Borkmann. 3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer. 4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when only cBPF is present, from Alexander Lobakin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
2019-12-19net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
2019-12-19net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
2019-12-19drivers/hid/hid-multitouch.c: fix a possible null pointer access.Pan Zhang
1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) { 1003 struct input_mt_slot *i_slot = &mt->slots[slotnum]; 1004 1005 if (input_mt_is_active(i_slot) && 1006 input_mt_is_used(mt, i_slot)) 1007 return -EAGAIN; 1008 } We previously assumed 'mt' could be null (see line 1002). The following situation is similar, so add a judgement. Signed-off-by: Pan Zhang <zhangpan26@huawei.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-12-19mmc: bcm2835: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191217122254.7103-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: usdhi6rol0: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA if needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217113114.32085-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: sh_mmcif: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA if needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217113031.31847-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: pxamci: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217113004.31688-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: owl-mmc: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112934.31535-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: mxs: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112847.31351-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: mxcmmc: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112803.31161-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: mmci: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112737.31024-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19mmc: dw_mmc: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191217112656.30860-1-peter.ujfalusi@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19Merge branch 'fixes' into nextUlf Hansson
2019-12-19mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaroundYangbo Lu
The erratum A-009204 workaround patch was reverted because of incorrect implementation. 8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" This patch is to re-implement the workaround (add a 5 ms delay before setting SYSCTL[RSTD] to make sure all the DMA transfers are finished). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com Fixes: 5dd195522562 ("mmc: sdhci-of-esdhc: add erratum A-009204 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-19EDAC/aspeed: Remove unneeded semicolonXu Wang
Remove unneeded semicolon reported by coccinelle. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andrew Jeffery <andrew@aj.id.au> Cc: James Morse <james.morse@arm.com> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Stefan Schaeckeler <sschaeck@cisco.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1576648806-1114-1-git-send-email-vulab@iscas.ac.cn
2019-12-18clk: qcom: Avoid SMMU/cx gdsc corner casesJeffrey Hugo
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid corner cases with SMMU per hardware documentation. Fixes: 3f7df5baa259 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCsMatthias Kaehlcke
Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fixes from Jarkko Sakkinen: "Bunch of fixes for rc3" * tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm/tpm_ftpm_tee: add shutdown call back tpm: selftest: cleanup after unseal with wrong auth/policy test tpm: selftest: add test covering async mode tpm: fix invalid locking in NONBLOCKING mode security: keys: trusted: fix lost handle flush tpm_tis: reserve chip for duration of tpm_tis_core_init KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails KEYS: remove CONFIG_KEYS_COMPAT
2019-12-19tpm/tpm_ftpm_tee: add shutdown call backPavel Tatashin
Add shutdown call back to close existing session with fTPM TA to support kexec scenario. Add parentheses to function names in comments as specified in kdoc. Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-19drm/exynos: gsc: add missed component_delChuhong Yuan
The driver forgets to call component_del in remove to match component_add in probe. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.net>
2019-12-18drm/sun4i: hdmi: Remove duplicate cleanup callsStefan Mavrodiev
When the HDMI unbinds drm_connector_cleanup() and drm_encoder_cleanup() are called. This also happens when the connector and the encoder are destroyed. This double call triggers a NULL pointer exception. The patch fixes this by removing the cleanup calls in the unbind function. Cc: <stable@vger.kernel.org> Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191217124632.20820-1-stefan@olimex.com
2019-12-18clk: sunxi-ng: r40: Allow setting parent rate for external clock outputsChen-Yu Tsai
One of the uses of the external clock outputs is to provide a stable 32768 Hz clock signal to WiFi and Bluetooth chips. On the R40, the RTC has an internal RC oscillator that is muxed with the external crystal. Allow setting the parent rate for the external clock outputs so that requests for 32768 Hz get passed to the RTC's clock driver to mux in the external crystal if it isn't already muxed correctly. Fixes: cd030a78f7aa ("clk: sunxi-ng: support R40 SoC") Fixes: 01a7ea763fc4 ("clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output") Cc: <stable@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-18net: stmmac: Always arm TX Timer at end of transmission startJose Abreu
If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Enable 16KB buffer sizeJose Abreu
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu
The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: RX buffer size must be 16 byte alignedJose Abreu
We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu
When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Only the last buffer has the FCS fieldJose Abreu
Only the last received buffer contains the FCS field. Check for end of packet before trying to strip the FCS field. Fixes: 88ebe2cf7f3f ("net: stmmac: Rework stmmac_rx()") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Do not accept invalid MTU valuesJose Abreu
The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Determine earlier the size of RX bufferJose Abreu
Split Header feature needs to know the size of RX buffer but current code is determining it too late. Fix this by moving the RX buffer computation to earlier stage. Changes from v2: - Do not try to align already aligned buffer size Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: selftests: Needs to check the number of Multicast regsJose Abreu
When running the MC and UC filter tests we setup a multicast address that its expected to be blocked. If the number of available multicast registers is zero, driver will always pass the multicast packets which will fail the test. Check if available multicast addresses is enough before running the tests. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18regulator: axp20x: Fix AXP22x ELDO2 regulator enable bitmaskChen-Yu Tsai
A copy-paste error was introduced when bitmasks were converted to macros, incorrectly setting the enable bitmask for ELDO2 to the one for ELDO1 for the AXP22x units. Fix it by using the correct macro. On affected boards, ELDO1 and/or ELDO2 are used to power the camera, which is currently unsupported. Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20191218044720.21990-1-wens@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-18libertas: Fix two buffer overflows at parsing bss descriptorWen Huang
add_ie_rates() copys rates without checking the length in bss descriptor from remote AP.when victim connects to remote attacker, this may trigger buffer overflow. lbs_ibss_join_existing() copys rates without checking the length in bss descriptor from remote IBSS node.when victim connects to remote attacker, this may trigger buffer overflow. Fix them by putting the length check before performing copy. This fix addresses CVE-2019-14896 and CVE-2019-14897. This also fix build warning of mixed declarations and code. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Wen Huang <huangwenabc@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18mt76: Off by one in mt76_calc_rx_airtime()Dan Carpenter
The sband->bitrates[] array has "sband->n_bitrates" elements so this check needs to be >= instead of > or we could read beyond the end of the array. These values come from when we call mt76_register_device(): ret = mt76_register_device(&dev->mt76, true, mt7603_rates, ARRAY_SIZE(mt7603_rates)); Here sband->bitrates[] is mt7603_rates[] and ->n_bitrates is the ARRAY_SIZE() Fixes: 5ce09c1a7907 ("mt76: track rx airtime for airtime fairness and survey") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18mt76: fix LED link time failureArnd Bergmann
The mt76_led_cleanup() function is called unconditionally, which leads to a link error when CONFIG_LEDS is a loadable module or disabled but mt76 is built-in: drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_unregister_device': mac80211.c:(.text+0x2ac): undefined reference to `led_classdev_unregister' Use the same trick that is guarding the registration, using an IS_ENABLED() check for the CONFIG_MT76_LEDS symbol that indicates whether LEDs can be used or not. Fixes: 36f7e2b2bb1d ("mt76: do not use devm API for led classdev") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck
The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18clk: Move clk_core_reparent_orphans() under CONFIG_OFOlof Johansson
A recent addition exposed a helper that is only used for CONFIG_OF. Move it into the CONFIG_OF zone in this file to make the compiler stop warning about an unused function. Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration") Signed-off-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org [sboyd@kernel.org: "Simply" move the function instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18iommu/dma: Relax locking in iommu_dma_prepare_msi()Robin Murphy
Since commit ece6e6f0218b ("iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts"), iommu_dma_prepare_msi() should no longer have to worry about preempting itself, nor being called in atomic context at all. Thus we can downgrade the IRQ-safe locking to a simple mutex to avoid angering the new might_sleep() check in iommu_map(). Reported-by: Qian Cai <cai@lca.pw> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-18iommu/vt-d: Remove incorrect PSI capability checkLu Baolu
The PSI (Page Selective Invalidation) bit in the capability register is only valid for second-level translation. Intel IOMMU supporting scalable mode must support page/address selective IOTLB invalidation for first-level translation. Remove the PSI capability check in SVA cache invalidation code. Fixes: 8744daf4b0699 ("iommu/vt-d: Remove global page flush support") Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18staging: wfx: fix wrong error messageJérôme Pouiller
The driver checks that the number of retries made by the device is coherent with the rate policy. However, this check make sense only if the device has returned RETRY_EXCEEDED. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix hif_set_mfp() with big endian hostsJérôme Pouiller
struct hif_mib_protected_mgmt_policy is an array of u8. There is no reason to swap its bytes. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 15:08:44 +0000