summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-11-21i40e: Fix for NUP NVM image downgrade failureJacob Keller
Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices") we've used the NVM lock to synchronize NVM reads even on devices which don't strictly need the lock. Doing so can cause a regression on older firmware prior to 1.5, especially when downgrading the firmware. Fix this by only grabbing the lock if we're running on an X722 device (which requires the lock as it uses the AdminQ to read the NVM), or if we're currently running 1.5 or newer firmware. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-21scsi: use dma_get_cache_alignment() as minimum DMA alignmentHuacai Chen
In non-coherent DMA mode, kernel uses cache flushing operations to maintain I/O coherency, so scsi's block queue should be aligned to the value returned by dma_get_cache_alignment(). Otherwise, If a DMA buffer and a kernel structure share a same cache line, and if the kernel structure has dirty data, cache_invalidate (no writeback) will cause data corruption. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhc@lemote.com> [hch: rebased and updated the comment and changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-21scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vregGustavo A. R. Silva
_vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa4976130934 ("ufs: Add regulator enable support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: setup_timer() -> timer_setup() (2 field)Kees Cook
This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: init_timer() -> setup_timer()Kees Cook
This mechanically converts all remaining cases of ancient open-coded timer setup with the old setup_timer() API, which is the first step in timer conversions. This has no behavioral changes, since it ultimately just changes the order of assignment to fields of struct timer_list when finding variations of: init_timer(&t); f.function = timer_callback; t.data = timer_callback_arg; to be converted into: setup_timer(&t, timer_callback, timer_callback_arg); The conversion is done with the following Coccinelle script, which is an improved version of scripts/cocci/api/setup_timer.cocci, in the following ways: - assignments-before-init_timer() cases - limit the .data case removal to the specific struct timer_list instance - handling calls by dereference (timer->field vs timer.field) spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/setup_timer.cocci @fix_address_of@ expression e; @@ init_timer( -&(e) +&e , ...) // Match the common cases first to avoid Coccinelle parsing loops with // "... when" clauses. @match_immediate_function_data_after_init_timer@ expression e, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) @match_immediate_function_data_before_init_timer@ expression e, func, da; @@ ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @match_function_and_data_after_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ... when != func = e2 when != da = e3 ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) @match_function_and_data_before_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) ... when != func = e2 when != da = e3 -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @r1 exists@ expression t; identifier f; position p; @@ f(...) { ... when any init_timer@p(\(&t\|t\)) ... when any } @r2 exists@ expression r1.t; identifier g != r1.f; expression e8; @@ g(...) { ... when any \(t.data\|t->data\) = e8 ... when any } // It is dangerous to use setup_timer if data field is initialized // in another function. @script:python depends on r2@ p << r1.p; @@ cocci.include_match(False) @r3@ expression r1.t, func, e7; position r1.p; @@ ( -init_timer@p(&t); +setup_timer(&t, func, 0UL); ... when != func = e7 -t.function = func; | -t.function = func; ... when != func = e7 -init_timer@p(&t); +setup_timer(&t, func, 0UL); | -init_timer@p(t); +setup_timer(t, func, 0UL); ... when != func = e7 -t->function = func; | -t->function = func; ... when != func = e7 -init_timer@p(t); +setup_timer(t, func, 0UL); ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook
This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21lightnvm: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Matias Bjorling <mb@lightnvm.io> Cc: linux-block@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21drivers/net: cris: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "yuval.shaia@oracle.com" <yuval.shaia@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Philippe Reynes <tremyfr@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21drm/vc4: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Eric Anholt <eric@anholt.net> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast Reviewed-by: Eric Anholt <eric@anholt.net>
2017-11-21drm/i915/selftests: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21usb: usbatm: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Additionally corrects and on-stack timer usage. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Duncan Sands <duncan.sands@free.fr> Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com> Cc: accessrunner-general@lists.sourceforge.net Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Allen Pais <allen.lkml@gmail.com>
2017-11-21drivers/firmware: psci: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Also adds missing call to destroy_timer_on_stack(). Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-22cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/cpufreq/mediatek-cpufreq.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-21cpufreq: Add Loongson machine dependenciesJames Hogan
The MIPS loongson cpufreq drivers don't build unless configured for the correct machine type, due to dependency on machine specific architecture headers and symbols in machine specific platform code. More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU, neither of which is defined in asm/mach-loongson32/regs-clk.h unless CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references loongson2_clockmod_table[], which is only defined in arch/mips/loongson64/lemote-2f/clock.c, i.e. when CONFIG_LEMOTE_MACH2F=y. Add these dependencies to Kconfig to avoid randconfig / allyesconfig build failures (e.g. when based on BMIPS which also has a cpufreq driver). Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-21HID: cp2112: Fix I2C_BLOCK_DATA transactionsEudean Sun
The existing driver erroneously treats I2C_BLOCK_DATA and BLOCK_DATA commands the same. For I2C_BLOCK_DATA reads, the length of the read is provided in data->block[0], but the length itself should not be sent to the slave. In contrast, for BLOCK_DATA reads no length is specified since the length will be the first byte returned from the slave. When copying data back to the data buffer, for an I2C_BLOCK_DATA read we have to take care not to overwrite data->block[0] to avoid overwriting the length. A BLOCK_DATA read doesn't have this concern since the first byte returned by the device is the length and belongs in data->block[0]. For I2C_BLOCK_DATA writes, the length is also provided in data->block[0], but the length itself is not sent to the slave (in contrast to BLOCK_DATA writes where the length prefixes the data sent to the slave). This was tested on physical hardware using i2cdump with the i and s flags to test the behavior of I2C_BLOCK_DATA reads and BLOCK_DATA reads, respectively. Writes were not tested but the I2C_BLOCK_DATA write change is pretty simple to verify by inspection. Signed-off-by: Eudean Sun <eudean@arista.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21platform/x86: dell-laptop: fix error return code in dell_init()weiyongjun (A)
Fix to return error code -ENOMEM from the kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 549b4930f057 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix a reference to a module parameter which was lost during the GREv6 receive path rewrite, from Alexey Kodanev. 2) Fix deref before NULL check in ipheth, from Gustavo A. R. Silva. 3) RCU read lock imbalance in tun_build_skb(), from Xin Long. 4) Some stragglers from the mac80211 folks: a) Timer conversions from Kees Cook b) Fix some sequencing issue when cfg80211 is built statically, from Johannes Berg c) Memory leak in mac80211_hwsim, from Ben Hutchings. 5) Add new qmi_wwan device ID, from Sebastian Sjoholm. 6) Fix use after free in tipc, from Jon Maloy. 7) Missing kdoc in nfp driver, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: nfp: flower: add missing kdoc tipc: fix access of released memory net: qmi_wwan: add Quectel BG96 2c7c:0296 mlxsw: spectrum: Do not try to create non-existing ports during unsplit mac80211: properly free requested-but-not-started TX agg sessions mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl() cfg80211: initialize regulatory keys/database later mac80211: aggregation: Convert timers to use timer_setup() nl80211: don't expose wdev->ssid for most interfaces mac80211: Convert timers to use timer_setup() net: vxge: Fix some indentation issues net: ena: fix race condition between device reset and link up setup r8169: use same RTL8111EVL green settings as in vendor driver r8169: fix RTL8111EVL EEE and green settings tun: fix rcu_read_lock imbalance in tun_build_skb tcp: when scheduling TLP, time of RTO should account for current ACK usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set gre6: use log_ecn_error module parameter in ip6_tnl_rcv()
2017-11-21drm/amdgpu: fix rmmod KCQ disable failed errorWang Hongcheng
If gfx_v8_0_hw_fini is called after amdgpu_ucode_fini_bo, we will hit KCQ disabled failed. Let amdgpu_ucode_fini_bo run after gfx_v8_0_hw_fini. BUG: SWDEV-135547 Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Wang Hongcheng <Annie.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-21drm/amdgpu: fix kernel hang when starting VNC serverXiangliang.Yu
After starting VNC server or running CTS test, kernel will hang and can see below call trace: [961816] INFO: task khugepaged:42 blocked for more than 120 seconds. [968581] Tainted: G OE 4.13.0 #1 [973495] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [980962] khugepaged D 0 42 2 0x00000000 [980967] Call Trace: [980977] __schedule+0x28d/0x890 [980982] schedule+0x36/0x80 [980986] rwsem_down_read_failed+0x139/0x1c0 [980991] ? update_curr+0x100/0x1c0 [981004] call_rwsem_down_read_failed+0x18/0x30 [981007] down_read+0x20/0x40 [981012] khugepaged_scan_mm_slot+0x78/0x1ac0 [981018] ? __switch_to+0x23e/0x4a0 [981022] ? finish_task_switch+0x79/0x240 [981026] khugepaged+0x146/0x480 [981031] ? remove_wait_queue+0x60/0x60 [981035] kthread+0x109/0x140 [981037] ? khugepaged_scan_mm_slot+0x1ac0/0x1ac0 [981039] ? kthread_park+0x60/0x60 [981044] ret_from_fork+0x25/0x30 After checking code and found 'commit b72cf4fca2bb7 ("drm/amdgpu: move taking mmap_sem into get_user_pages v2")' forget to drop one case of up_read. Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-21Merge tag 'ceph-for-4.15-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "We have a set of file locking improvements from Zheng, rbd rw/ro state handling code cleanup from myself and some assorted CephFS fixes from Jeff. rbd now defaults to single-major=Y, lifting the limit of ~240 rbd images per host for everyone" * tag 'ceph-for-4.15-rc1' of git://github.com/ceph/ceph-client: rbd: default to single-major device number scheme libceph: don't WARN() if user tries to add invalid key rbd: set discard_alignment to zero ceph: silence sparse endianness warning in encode_caps_cb ceph: remove the bump of i_version ceph: present consistent fsid, regardless of arch endianness ceph: clean up spinlocking and list handling around cleanup_cap_releases() rbd: get rid of rbd_mapping::read_only rbd: fix and simplify rbd_ioctl_set_ro() ceph: remove unused and redundant variable dropping ceph: mark expected switch fall-throughs ceph: -EINVAL on decoding failure in ceph_mdsc_handle_fsmap() ceph: disable cached readdir after dropping positive dentry ceph: fix bool initialization/comparison ceph: handle 'session get evicted while there are file locks' ceph: optimize flock encoding during reconnect ceph: make lock_to_ceph_filelock() static ceph: keep auth cap when inode has flocks or posix locks
2017-11-21Merge tag 'mac80211-for-davem-2017-11-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few things: * straggler timer conversions from Kees * memory leak fix in hwsim * fix some fallout from regdb changes if wireless is built-in * also free aggregation sessions in startup state when station goes away, to avoid crashing the timer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21nfp: flower: add missing kdocJakub Kicinski
Commit 0115552eac14 ("nfp: remove false positive offloads in flower vxlan") missed adding kdoc for a new parameter of nfp_flower_add_offload(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21net: qmi_wwan: add Quectel BG96 2c7c:0296Sebastian Sjoholm
Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to qmi_wwan.c to allow QMI communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21mlxsw: spectrum: Do not try to create non-existing ports during unsplitIdo Schimmel
On some systems, when we unsplit a port we need to re-create two ports instead. On other systems, only one needs to be re-created. Do not try to create a port if during driver initialization it was assigned a negative module number, which is invalid. This avoids the following error during unsplit: [ 941.012478] mlxsw_spectrum 0000:01:00.0: Port 43: Failed to map module The error is harmless and caused by the fact that a local port is already mapped to module 0. Fixes: be94535f9531 ("mlxsw: spectrum: Make split flow match firmware requirements") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21drm/i915: Fix init_clock_gating for resumeVille Syrjälä
Moving the init_clock_gating() call from intel_modeset_init_hw() to intel_modeset_gem_init() had an unintended effect of not applying some workarounds on resume. This, for example, cause some kind of corruption to appear at the top of my IVB Thinkpad X1 Carbon LVDS screen after hibernation. Fix the problem by explicitly calling init_clock_gating() from the resume path. I really hope this doesn't break something else again. At least the problems reported at https://bugs.freedesktop.org/show_bug.cgi?id=103549 didn't make a comeback, even after a hibernate cycle. v2: Reorder the init_clock_gating vs. modeset_init_hw to match the display reset path (Rodrigo) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 6ac43272768c ("drm/i915: Move init_clock_gating() back to where it was") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171116160215.25715-1-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 675f7ff35bd256e65d3d0f52718d8babf5d1002a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIMChris Wilson
Commit 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") tried to fixup the check_flush_dependency warning for hitting i915_gem_userptr_mn_invalidate_range_start from within the shrinker, but I failed to notice userptr has 2 similarly named workqueues. I marked up i915-userptr-acquire as WQ_MEM_RECLAIM whereas we only wait upon i915-userptr-release from inside the reclaim paths. [62530.869510] workqueue: PF_MEMALLOC task 7983(gem_shrink) is flushing !WQ_MEM_RECLAIM i915-userptr-release: (null) [62530.869515] ------------[ cut here ]------------ [62530.869519] WARNING: CPU: 1 PID: 7983 at kernel/workqueue.c:2434 check_flush_dependency+0x7f/0x110 [62530.869519] Modules linked in: pegasus mii ip6table_filter ip6_tables bnep iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hda_core snd_hwdep kvm snd_pcm irqbypass snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul 8250_dw ghash_clmulni_intel snd_seq pcbc snd_seq_device snd_timer btusb aesni_intel btrtl btbcm aes_x86_64 iwlwifi btintel crypto_simd glue_helper cryptd bluetooth snd intel_cstate input_leds idma64 intel_rapl_perf ecdh_generic serio_raw soundcore cfg80211 wmi_bmof virt_dma intel_lpss_pci intel_lpss acpi_als kfifo_buf industrialio winbond_cir soc_button_array rc_core spidev tpm_crb intel_hid acpi_pad mac_hid sparse_keymap [62530.869546] parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid i915 i2c_algo_bit prime_numbers drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp pps_core libahci drm wmi video i2c_hid hid [62530.869557] CPU: 1 PID: 7983 Comm: gem_shrink Tainted: G U W L 4.14.0-rc8-drm-tip-ww45-commit-1342299+ #1 [62530.869558] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X098.A00.1707301945 07/30/2017 [62530.869559] task: ffffa1049dbeec80 task.stack: ffffae7d05c44000 [62530.869560] RIP: 0010:check_flush_dependency+0x7f/0x110 [62530.869561] RSP: 0018:ffffae7d05c473a0 EFLAGS: 00010286 [62530.869562] RAX: 000000000000006e RBX: ffffa1049540f400 RCX: ffffffffa3e55788 [62530.869562] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202 [62530.869563] RBP: ffffae7d05c473c0 R08: 000000000000006e R09: 000000000038bb0e [62530.869563] R10: 0000000000000000 R11: 000000000000006e R12: ffffa1049dbeec80 [62530.869564] R13: 0000000000000000 R14: 0000000000000000 R15: ffffae7d05c473e0 [62530.869565] FS: 00007f621b129880(0000) GS:ffffa1050b240000(0000) knlGS:0000000000000000 [62530.869566] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [62530.869566] CR2: 00007f6214400000 CR3: 0000000353a17003 CR4: 00000000003606e0 [62530.869567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [62530.869567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [62530.869568] Call Trace: [62530.869570] flush_workqueue+0x115/0x3d0 [62530.869573] ? wake_up_process+0x15/0x20 [62530.869596] i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869614] ? i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915] [62530.869616] __mmu_notifier_invalidate_range_start+0x55/0x80 [62530.869618] try_to_unmap_one+0x791/0x8b0 [62530.869620] ? call_rwsem_down_read_failed+0x18/0x30 [62530.869622] rmap_walk_anon+0x10b/0x260 [62530.869624] rmap_walk+0x48/0x60 [62530.869625] try_to_unmap+0x93/0xf0 [62530.869626] ? page_remove_rmap+0x2a0/0x2a0 [62530.869627] ? page_not_mapped+0x20/0x20 [62530.869629] ? page_get_anon_vma+0x90/0x90 [62530.869630] ? invalid_mkclean_vma+0x20/0x20 [62530.869631] migrate_pages+0x946/0xaa0 [62530.869633] ? __ClearPageMovable+0x10/0x10 [62530.869635] ? isolate_freepages_block+0x3c0/0x3c0 [62530.869636] compact_zone+0x22f/0x970 [62530.869638] compact_zone_order+0xa3/0xd0 [62530.869640] try_to_compact_pages+0x1a5/0x2a0 [62530.869641] ? try_to_compact_pages+0x1a5/0x2a0 [62530.869643] __alloc_pages_direct_compact+0x50/0x110 [62530.869644] __alloc_pages_slowpath+0x4da/0xf30 [62530.869646] __alloc_pages_nodemask+0x262/0x280 [62530.869648] alloc_pages_vma+0x165/0x1e0 [62530.869649] shmem_alloc_hugepage+0xd0/0x130 [62530.869651] ? __radix_tree_insert+0x45/0x230 [62530.869652] ? __vm_enough_memory+0x29/0x130 [62530.869654] shmem_alloc_and_acct_page+0x10d/0x1e0 [62530.869655] shmem_getpage_gfp+0x426/0xc00 [62530.869657] shmem_fault+0xa0/0x1e0 [62530.869659] ? file_update_time+0x60/0x110 [62530.869660] __do_fault+0x1e/0xc0 [62530.869661] __handle_mm_fault+0xa35/0x1170 [62530.869662] handle_mm_fault+0xcc/0x1c0 [62530.869664] __do_page_fault+0x262/0x4f0 [62530.869666] do_page_fault+0x2e/0xe0 [62530.869667] page_fault+0x22/0x30 [62530.869668] RIP: 0033:0x404335 [62530.869669] RSP: 002b:00007fff7829e420 EFLAGS: 00010216 [62530.869670] RAX: 00007f6210400000 RBX: 0000000000000004 RCX: 0000000000b80000 [62530.869670] RDX: 0000000000002e01 RSI: 0000000000008000 RDI: 0000000000000004 [62530.869671] RBP: 0000000000000019 R08: 0000000000000002 R09: 0000000000000000 [62530.869671] R10: 0000000000000559 R11: 0000000000000246 R12: 0000000008000000 [62530.869672] R13: 00000000004042f0 R14: 0000000000000004 R15: 000000000000007e [62530.869673] Code: 00 8b b0 18 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 c0 06 00 00 4d 89 f0 48 c7 c7 40 c0 c8 a3 c6 05 68 c5 e8 00 01 e8 c2 68 04 00 <0f> ff 4d 85 ed 74 18 49 8b 45 20 48 8b 70 08 8b 86 00 01 00 00 [62530.869691] ---[ end trace 01e01ad0ff5781f8 ]--- Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103739 Fixes: 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114173520.8829-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com> (cherry picked from commit 41729bf2248bc8593e5103d43974079cc269524c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21drm/i915: Clear breadcrumb node when cancelling signalingChris Wilson
When we call intel_engine_cancel_signaling() to stop reporting when a request is completed via an asynchronous signal, we remove that request from the breadcrumb wait queue. However, we may be concurrently processing that request in the signaler itself, the actual operations on the request's node itself are serialised but we do not actually clear the waiter after removing it from the tree allowing both parties to attempt to do so and corrupting the rbtree. (Previously removing from the breadcrumb wait queue could only be done on behalf of i915_wait_request, so this race could not happen). Reported-by: "He, Bo" <bo.he@intel.com> Fixes: 9eb143bbec7d ("drm/i915: Allow a request to be cancelled") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "He, Bo" <bo.he@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115121458.24655-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit c534612e780c4a2c8ef5bfc11583c7d58436baca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21drm/i915/gvt: ensure -ve return value is handled correctlyColin Ian King
An earlier fix changed the return type from find_bb_size however the integer return is being assigned to a unsigned int so the -ve error check will never be detected. Make bb_size an int to fix this. Detected by CoverityScan CID#1456886 ("Unsigned compared against 0") Fixes: 1e3197d6ad73 ("drm/i915/gvt: Refine error handling for perform_bb_shadow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit 24f8a29af4afe7c53e08f4afa0c3fa9eb3791b89) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21drm/i915: Re-register PMIC bus access notifier on runtime resumeHans de Goede
intel_uncore_suspend() unregisters the uncore code's PMIC bus access notifier and gets called on both normal and runtime suspend. intel_uncore_resume_early() re-registers the notifier, but only on normal resume. Add a new intel_uncore_runtime_resume() function which only re-registers the notifier and call that on runtime resume. Cc: stable@vger.kernel.org Reported-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114135518.15981-2-hdegoede@redhat.com (cherry picked from commit bedf4d79c3654921839b62246b0965ddb308b201) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-21drm/i915: Fix false-positive assert_rpm_wakelock_held in ↵Hans de Goede
i915_pmic_bus_access_notifier v2 assert_rpm_wakelock_held is triggered from i915_pmic_bus_access_notifier even though it gets unregistered on (runtime) suspend, this is caused by a race happening under the following circumstances: intel_runtime_pm_put does: atomic_dec(&dev_priv->pm.wakeref_count); pm_runtime_mark_last_busy(kdev); pm_runtime_put_autosuspend(kdev); And pm_runtime_put_autosuspend calls intel_runtime_suspend from a workqueue, so there is ample of time between the atomic_dec() and intel_runtime_suspend() unregistering the notifier. If the notifier gets called in this windowd assert_rpm_wakelock_held falsely triggers (at this point we're not runtime-suspended yet). This commit adds disable_rpm_wakeref_asserts and enable_rpm_wakeref_asserts calls around the intel_uncore_forcewake_get(FORCEWAKE_ALL) call in i915_pmic_bus_access_notifier fixing the false-positive WARN_ON. Changes in v2: -Reword comment explaining why disabling the wakeref asserts is ok and necessary Cc: stable@vger.kernel.org Reported-by: FKr <bugs-freedesktop@ubermail.me> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171110150301.9601-2-hdegoede@redhat.com (cherry picked from commit ce30560c80dead91e98a03d90fb8791e57a9b69d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-11-20Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here (though removal of the dead igafb driver stands out in diffstat). Summary: - convert timers to use timer_setup() (Kees Cook, Thierry Reding) - fix panels support on iMX boards in mxsfb driver (Stefan Agner) - fix timeout on EDID read in udlfb driver (Ladislav Michl) - add missing modes to fix out of bounds access in controlfb driver (Geert Uytterhoeven) - update initialisation paths in sa1100fb driver to be more robust (Russell King) - fix error handling path of ->probe method in au1200fb driver (Christophe JAILLET) - fix handling of cases when either panel or crt is defined in sm501fb driver (Sudip Mukherjee, Colin Ian King) - add ability to the Goldfish FB driver to be recognized by OS via DT (Aleksandar Markovic) - structures constifications (Bhumika Goyal) - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter) - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring) - remove dead igafb driver" * tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits) OMAPFB: prevent buffer underflow in omapfb_parse_vram_param() video: fbdev: sm501fb: fix potential null pointer dereference on fbi fbcon: Initialize ops->info early video: fbdev: Convert timers to use timer_setup() video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup() fbdev: controlfb: Add missing modes to fix out of bounds access video: fbdev: sis_main: mark expected switch fall-throughs video: fbdev: cirrusfb: mark expected switch fall-throughs video: fbdev: aty: radeon_pm: mark expected switch fall-throughs video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt video: fbdev: intelfb: remove redundant variables video/fbdev/dnfb: Use common error handling code in dnfb_probe() sm501fb: suspend and resume fb if it exists sm501fb: unregister framebuffer only if registered sm501fb: deallocate colormap only if allocated video: goldfishfb: Add support for device tree bindings Documentation: Add device tree binding for Goldfish FB driver video: udlfb: Fix read EDID timeout video: fbdev: remove dead igafb driver video: fbdev: mxsfb: fix pixelclock polarity ...
2017-11-20Merge tag 'devicetree-fixes-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid * tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Remove fsl,mc13892 of: Document exactly what of_find_node_by_name() puts of: unittest: disable interrupts_property warning of: unittest: let dtc generate __local_fixups__ dt-bindings: usb: document hub and host-controller properties dt-bindings: usb: clean up compatible property dt-bindings: usb: fix reg-property port-number range dt-bindings: usb: fix example hub node name of/pci: Fix theoretical NULL dereference
2017-11-20drm/amdgpu: don't skip attributes when powerplay is enabledAlex Deucher
The function checks non-powerplay structures so regressed when the pp_enabled check was removed. This should ideally be implemented similarly for powerplay. Fixes: 6d07fe7bcae57 ("drm/amdgpu: delete pp_enable in adev") Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-11-20scsi: aacraid: Prevent crash in case of free interrupt during scsi EH pathGuilherme G. Piccoli
As part of the scsi EH path, aacraid performs a reinitialization of the adapter, which encompass freeing resources and IRQs, NULLifying lots of pointers, and then initialize it all over again. We've identified a problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ is enabled on kernel config file. Happens that, in case this flag was set, right after free_irq() effectively clears the interrupt, it checks if it was requested as IRQF_SHARED. In positive case, it performs another call to the IRQ handler on driver. Problem is: since aacraid currently free some resources *before* freeing the IRQ, once free_irq() path calls the handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL pointer dereference with the following trace: aac_src_intr_message+0xf8/0x740 [aacraid] __free_irq+0x33c/0x4a0 free_irq+0x78/0xb0 aac_free_irq+0x13c/0x150 [aacraid] aac_reset_adapter+0x2e8/0x970 [aacraid] aac_eh_reset+0x3a8/0x5d0 [aacraid] scsi_try_host_reset+0x74/0x180 scsi_eh_ready_devs+0xc70/0x1510 scsi_error_handler+0x624/0xa20 This patch prevents the crash by changing the order of the deinitialization in this path of aacraid: first we clear the IRQ, then we free other resources. No functional change intended. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-20scsi: aacraid: Perform initialization reset only onceGuilherme G. Piccoli
Currently the driver accepts two ways of requesting an initialization reset on the adapter: by passing aac_reset_devices module parameter, or the generic kernel parameter reset_devices. It's working as intended...but if we end up reaching a scsi hang and the scsi EH mechanism takes place, aacraid performs resets as part of the scsi error recovery procedure. These EH routines might reinitialize the device, and if we have provided some of the reset parameters in the kernel command-line, we again perform an "initialization" reset. So, to avoid this duplication of resets in case of scsi EH path, this patch adds a field to aac_dev struct to keep per-adapter track of the init reset request - once it's done, we set it to false and don't proactively reset anymore in case of reinitializations. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-20scsi: aacraid: Check for PCI state of device in a generic wayGuilherme G. Piccoli
Commit 16ae9dd35d37 ("scsi: aacraid: Fix for excessive prints on EEH") introduced checks about the state of device before any PCI operations in the driver. Basically, this prevents it to perform PCI accesses when device is in the process of recover from a PCI error. In PowerPC, such mechanism is called EEH, and the aforementioned commit introduced checks that are based on EEH-specific primitives for that. The potential problems with this approach are three: first, these checks are "locked" to powerpc only - another archs could have error recovery methods too, like AER in Intel. Also, the powerpc primitives perform expensive FW accesses to validate the precise PCI state of a device. Finally, code becomes more complicated and needs ifdef validation based on arch config being set. So, this patch makes use of generic PCI state checks, which are lightweight and non-dependent of arch configs - also, it makes the code cleaner. Fixes: 16ae9dd35d37 ("scsi: aacraid: Fix for excessive prints on EEH") Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Dave Carroll <david.carroll@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-21bpf: offload: move offload device validation out to the driversJakub Kicinski
With TC shared block changes we can't depend on correct netdev pointer being available in cls_bpf. Move the device validation to the driver. Core will only make sure that offloaded programs are always attached in the driver (or in HW by the driver). We trust that drivers which implement offload callbacks will perform necessary checks. Moving the checks to the driver is generally a useful thing, in practice the check should be against a switchdev instance, not a netdev, given that most ASICs will probably allow using the same program on many ports. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-20drm/amd/pp: fix typecast error in powerplay.Rex Zhu
resulted in unexpected data truncation Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-11-21ACPI / EC: Fix regression related to PM ops support in ECDT deviceLv Zheng
On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga <luya@fedoraproject.org> Tested-by: Luya Tshimbalanga <luya@fedoraproject.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-20ACPI / bus: Leave modalias empty for devices which are not presentHans de Goede
Most Bay and Cherry Trail devices use a generic DSDT with all possible peripheral devices present in the DSDT, with their _STA returning 0x00 or 0x0f based on AML variables which describe what is actually present on the board. Since ACPI device objects with a 0x00 status (not present) still get an entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID modalias, userspace would end up loading modules for non present hardware. This commit fixes this by leaving the modalias empty for non present devices. This results in 10 modules less being loaded with a generic distro kernel config on my Cherry Trail test-device (a GPD pocket). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-20rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driverBaolin Wang
This patch adds the Spreadtrum RTC driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-20platform/x86: dell-smbios-wmi: Disable userspace interface if missing hotfixMario Limonciello
The Dell SMBIOS WMI interface will fail for some more complex calls unless a WMI hotfix has been included. Most platforms have this fix available in a maintenance BIOS release. In the case the driver is loaded on a platform without this fix, disable the userspace interface. A hotfix indicator is present in the dell-wmi-descriptor that represents whether or not more complex calls will work properly. "Simple" calls such as those used by dell-laptop and dell-wmi will continue to work properly so dell-smbios-wmi should not be blocked from binding and being used as the dell-smbios dispatcher. Suggested-by: Girish Prakash <girish.prakash@dell.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-11-20of: Document exactly what of_find_node_by_name() putsStephen Boyd
It isn't clear if this function of_node_put()s the 'from' argument, or the node it searches. Clearly indicate which variable is touched. Fold in some more fixes from Randy too because we're in the area. Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-20wcn36xx: fix iris child-node lookupJohan Hovold
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent mmio node was also prematurely freed. Fixes: fd52bdae9ab0 ("wcn36xx: Disable 5GHz for wcn3620") Cc: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-11-20ath10k: fix data rx for CCMP-256, GCMP and GCMP-256 in raw modeVasanthakumar Thiagarajan
Make sure 16-byte mic is removed from the rx data packet tail when CCMP-256, GCMP and GCMP-256 ciphers are used in raw decap mode. This fixed rx traffic failures in those ciphers in raw mode. Split the helper returning crypto tail length into two, one to get the ICV length and other to get the mic lengh for the cipher to make it clean. Fixes: 2ea9f12cefe4 ("ath10k: add new cipher suite support") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-11-20mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()Ben Hutchings
hwsim_new_radio_nl() now copies the name attribute in order to add a null-terminator. mac80211_hwsim_new_radio() (indirectly) copies it again into the net_device structure, so the first copy is not used or freed later. Free the first copy before returning. Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20Merge tag 'iwlwifi-for-kalle-2017-11-19' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes iwlwifi: first set of fixes for 4.15 * Support new FW API version of scan cmd (used in FW version 34); * Add a bunch of PCI IDs and fix configuration structs for A000 devices; * Fix the exported firmware name strings for 9000 and A000 devices;
2017-11-20drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding supportJyri Sarha
This patch removes DRM_TILCDC_SLAVE_COMPAT option for supporting the obsolete "ti,tilcdc,slave" device tree binding. The new of_graph based binding - that is widely used in other drm driver too - has been supported since Linux v4.2. Maintaining the the backwards dts conversion code in the DRM_TILCDC_SLAVE_COMPAT has become a nuisance for the device/of development so the we decided to drop it after Linux v4.14, the 2017 LTS. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Rob Herring <robh@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:11:52 +0000