| Age | Commit message (Collapse) | Author |
|---|
|
Move away from a statically allocated array for holding the current set of
protocols implemented by the platform in favour of allocating it
dynamically based on the number of protocols effectively advertised by the
platform via BASE protocol exchanges.
While at that, rectify the BASE_DISCOVER_LIST_PROTOCOLS loop iterations to
terminate only when a number of protocols equal to the advertised ones has
been received, instead of looping till the platform returns no more
protocols descriptors. This new behaviour is better compliant with the
specification and it has been tested to work equally well against an SCMI
stack running on top of an official SCP firmware on a JUNO board.
Link: https://lore.kernel.org/r/20220330150551.2573938-6-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Do not blindly trust SCMI platform response about list of implemented
protocols, instead validate the reported length of the list of protocols
against the real payload size of the message reply.
Link: https://lore.kernel.org/r/20220330150551.2573938-5-cristian.marussi@arm.com
Fixes: b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Added early break if loop_num_ret = 0 and simplified calc_list_sz
calculation]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
[Why]
It's reasonable that we receive NAK while doing DP_REMOTE_DPCD_READ.
Downstream device might reply NAK with the reason and source should
react accordingly.
e.g.
1. When downstream device can't handle corresponding message in time,
it then replies NAK as reason been set as DEFER.
2. When multi-function branch-sink device doesn't enumerate virtual
DP peer devices for those multi-function down facing ports. Without
virtual DPCD, branch device might reply NAK with reason as BAD_PARAM
indicating this port can't do aux DPCD read.
It's expected result. Not an error.
[How]
Use drm_dbg_kms() to replace drm_err() when receive NAK.
Changes since v1:
* drm_dp_mst_topology.c file path changed. Folder was rename from
'dp' to 'display'
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[fixed some indenting issues]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220428124944.1683680-1-Wayne.Lin@amd.com
|
|
This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae
When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.
Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Time-Specified Departure feature is indeed mutually exclusive with
TX IP checksumming in ENETC, but TX checksumming in itself is broken and
was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx
checksumming offload code").
The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply
with software TSO's expectations, and still did the checksumming in
software by calling skb_checksum_help(). So there isn't any restriction
for the Time-Specified Departure feature.
However, enetc_setup_tc_txtime() doesn't understand that, and blindly
looks for NETIF_F_CSUM_MASK.
Instead of checking for things which can literally never happen in the
current code base, just remove the check and let the driver offload
tc-etf qdiscs.
Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF driver can forward any IPsec flags and such makes the function
is not extendable and prone to backward/forward incompatibility.
If new software runs on VF, it won't know that PF configured something
completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203102815.38624-1-steven.price@arm.com/
|
|
The get_sg_table() function does not return NULL.
It returns error pointers.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211213072115.18098-1-linmq006@gmail.com/
|
|
Merge a fix for the attr.show callback prototype in the int340x thermal
driver (Kees Cook).
* thermal-int340x:
thermal: int340x: Fix attr.show callback prototype
|
|
PM and PM_GENERIC_DOMAINS configs are required for RZ/N1 SOCs.
Without these configs, the clocks used by the PCI bridge are not
enabled and so accessing the devices leads to a kernel crash:
Unhandled fault: external abort on non-linefetch (0x1008) at 0x90b5f848
Select PM and PM_GENERIC_DOMAINS for ARCH_RZN1
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220422120850.769480-5-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a configuration option for the RZ/V2M SoC.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Link: https://lore.kernel.org/r/20220420204307.87343-1-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio
Pull set of IIO fixes for 5.18 from Jonathan Cameron:
"1st set of IIO fixes for the 5.18 cycle
ad3552r:
- Fix a bug with error codes being stored in unsigned local variable.
- Fix IS_ERR when value is either NULL or not rather than ERR_PTR
ad5446
- Fix shifting of read_raw value.
ad5592r
- Fix missing return value being set for a fwnode property read.
ad7280a
- Wrong variable being used to set thresholds.
admv8818
- Kconfig dependency fix.
ak8975
- Missing regulator disable in error path.
bmi160
- Disable regulators in an error path.
dac5571
- Fix chip id detection for devices with OF bindings.
inv_icm42600
- Handle a case of a missing I2C NACK during initially configuration.
ltc2688
- Fix voltage scaling where integer part was written twice and
decimal part not at all.
scd4x
- Handle error before using value.
sx9310
- Device property parsing against indio_dev->dev.of_node which
hasn't been set yet.
sx9324
- Fix hardware gain related maths.
- Wrong defaults for precharge internal resistance register."
* tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: inv_icm42600: Fix I2C init possible nack
iio: dac: ltc2688: fix voltage scale read
iio:dac:ad3552r: Fix an IS_ERR() vs NULL check
iio: sx9324: Fix default precharge internal resistance register
iio: dac: ad5446: Fix read_raw not returning set value
iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
iio:proximity:sx9324: Fix hardware gain read/write
iio:proximity:sx_common: Fix device property parsing on DT systems
iio: adc: ad7280a: Fix wrong variable used when setting thresholds.
iio:filter:admv8818: select REGMAP_SPI for ADMV8818
iio: dac: ad5592r: Fix the missing return value.
iio: dac: dac5571: Fix chip id detection for OF devices
iio:imu:bmi160: disable regulator in error path
iio: scd4x: check return of scd4x_write_and_fetch
iio: dac: ad3552r: fix signedness bug in ad3552r_reset()
|
|
Merge cpuidle fixes for 5.18-rc5:
- Make intel_idle enable C1E promotion on all CPUs when C1E is
preferred to C1 (Artem Bityutskiy).
- Make C6 optimization on Sapphire Rapids added recently work as
expected if both C1E and C1 are "preferred" (Artem Bityutskiy).
* pm-cpuidle:
intel_idle: Fix SPR C6 optimization
intel_idle: Fix the 'preferred_cstates' module parameter
|
|
Replace the copyright boilerplate with a SPDX identifier.
[ bp: Rewrite commit message. ]
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220428044051.2842687-1-shubhrajyoti.datta@xilinx.com
|
|
i.MX8MP use Synopsys v3.70a DDR controller IP so add support for it with
the Synopsys driver.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20220428023209.18087-1-sherry.sun@nxp.com
|
|
Similar to SPR, the C1 and C1E states on ADL are mutually exclusive.
Only one of them can be enabled at a time.
But contrast to SPR, which usually has a strong latency requirement
as a Xeon processor, C1E is preferred on ADL for better energy
efficiency.
Add custom C-state tables for ADL with both C1 and C1E, and
1. Enable the "C1E promotion" bit in MSR_IA32_POWER_CTL and mark C1
with the CPUIDLE_FLAG_UNUSABLE flag, so C1 is not available by
default.
2. Add support for the "preferred_cstates" module parameter, so that
users can choose to use C1 instead of C1E by booting with
"intel_idle.preferred_cstates=2".
Separate custom C-state tables are introduced for the ADL mobile and
desktop processors, because of the exit latency differences between
these two variants, especially with respect to PC10.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Changelog edits, code rearrangement ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
While enumerating protocols implemented by the SCMI platform using
BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is
currently validated in an improper way since the check employs a sum
between unsigned integers that could overflow and cause the check itself
to be silently bypassed if the returned value 'loop_num_ret' is big
enough.
Fix the validation avoiding the addition.
Link: https://lore.kernel.org/r/20220330150551.2573938-4-cristian.marussi@arm.com
Fixes: b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Bail out of protocol initialisation routine early when basic information
about protocol version and attributes could not be retrieved. Failing to
act this way can lead to a successfully initialized SCMI protocol which
is in fact not fully functional.
Link: https://lore.kernel.org/r/20220330150551.2573938-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20220425090826.2532165-1-yangyingliang@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 5.18
- Fix off-by-one in SMMUv3 SVA TLB invalidation
- Disable large mappings to workaround nvidia erratum
|
|
The page fault handling framework in the IOMMU core explicitly states
that it doesn't handle PCI PASID Stop Marker and the IOMMU drivers must
discard them before reporting faults. This handles Stop Marker messages
in prq_event_thread() before reporting events to the core.
The VT-d driver explicitly drains the pending page requests when a CPU
page table (represented by a mm struct) is unbound from a PASID according
to the procedures defined in the VT-d spec. The Stop Marker messages do
not need a response. Hence, it is safe to drop the Stop Marker messages
silently if any of them is found in the page request queue.
Fixes: d5b9e4bfe0d88 ("iommu/vt-d: Report prq to io-pgfault framework")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220421113558.3504874-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220423082330.3897867-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Calculate the appropriate mask for non-size-aligned page selective
invalidation. Since psi uses the mask value to mask out the lower order
bits of the target address, properly flushing the iotlb requires using a
mask value such that [pfn, pfn+pages) all lie within the flushed
size-aligned region. This is not normally an issue because iova.c
always allocates iovas that are aligned to their size. However, iovas
which come from other sources (e.g. userspace via VFIO) may not be
aligned.
To properly flush the IOTLB, both the start and end pfns need to be
equal after applying the mask. That means that the most efficient mask
to use is the index of the lowest bit that is equal where all higher
bits are also equal. For example, if pfn=0x17f and pages=3, then
end_pfn=0x181, so the smallest mask we can use is 8. Any differences
above the highest bit of pages are due to carrying, so by xnor'ing pfn
and end_pfn and then masking out the lower order bits based on pages, we
get 0xffffff00, where the first set bit is the mask we want to use.
Fixes: 6fe1010d6d9c ("vfio/type1: DMA unmap chunking")
Cc: stable@vger.kernel.org
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220401022430.1262215-1-stevensd@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220410013533.3959168-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-5-ikegami.t@gmail.com
|
|
It is for the model number 01, 02, V1 and V2.
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-4-ikegami.t@gmail.com
|
|
Since commit dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to
check correct value") buffered writes fail on S29GL064N. This is
because, on S29GL064N, reads return 0xFF at the end of DQ polling for
write completion, where as, chip_good() check expects actual data
written to the last location to be returned post DQ polling completion.
Fix is to revert to using chip_good() for S29GL064N which only checks
for DQ lines to settle down to determine write completion.
Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Cc: stable@vger.kernel.org
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-3-ikegami.t@gmail.com
|
|
This is a preparation patch for the S29GL064N buffer writes fix. There
is no functional change.
Link: https://lore.kernel.org/r/b687c259-6413-26c9-d4c9-b3afa69ea124@pengutronix.de/
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220323170458.5608-2-ikegami.t@gmail.com
|
|
Add reset assertion/deassertion for Aspeed MDIO. There are 4 MDIO
controllers embedded in Aspeed AST2600 SOC and share one reset control
register SCU50[3]. To work with old DT blobs which don't have the reset
property, devm_reset_control_get_optional_shared is used in this change.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- GuC hwconfig support and query (John Harrison, Rodrigo Vivi, Tvrtko Ursulin)
- Sysfs support for multi-tile devices (Andi Shyti, Sujaritha Sundaresan)
- Per client GPU utilisation via fdinfo (Tvrtko Ursulin, Ashutosh Dixit)
- Add DRM_I915_QUERY_GEOMETRY_SUBSLICES (Matt Atwood)
Cross-subsystem Changes:
- Add GSC as a MEI auxiliary device (Tomas Winkler, Alexander Usyskin)
Core Changes:
- Document fdinfo format specification (Tvrtko Ursulin)
Driver Changes:
- Fix prime_mmap to work when using LMEM (Gwan-gyeong Mun)
- Fix vm open count and remove vma refcount (Thomas Hellström)
- Fixup setting screen_size (Matthew Auld)
- Opportunistically apply ALLOC_CONTIGIOUS (Matthew Auld)
- Limit where we apply TTM_PL_FLAG_CONTIGUOUS (Matthew Auld)
- Drop aux table invalidation on FlatCCS platforms (Matt Roper)
- Add missing boundary check in vm_access (Mastan Katragadda)
- Update topology dumps for Xe_HP (Matt Roper)
- Add support for steered register writes (Matt Roper)
- Add steering info to GuC register save/restore list (Daniele Ceraolo Spurio)
- Small PCI BAR enabling (Matthew Auld, Akeem G Abodunrin, CQ Tang)
- Add preemption changes for Wa_14015141709 (Akeem G Abodunrin)
- Add logical mapping for video decode engines (Matthew Brost)
- Don't evict unmappable VMAs when pinning with PIN_MAPPABLE (v2) (Vivek Kasireddy)
- GuC error capture support (Alan Previn, Daniele Ceraolo Spurio)
- avoid concurrent writes to aux_inv (Fei Yang)
- Add Wa_22014226127 (José Roberto de Souza)
- Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL (Matt Roper)
- Evict and restore of compressed objects (Ramalingam C)
- Update to GuC version 70.1.1 (John Harrison)
- Add Wa_22011802037 force cs halt (Tilak Tangudu)
- Enable Wa_22011802037 for gen12 GuC based platforms (Umesh Nerlige Ramappa)
- GuC based workarounds for DG2 (Vinay Belgaumkar, John Harrison, Matthew Brost, José Roberto de Souza)
- consider min_page_size when migrating (Matthew Auld)
- Prep work for next GuC firmware release (John Harrison)
- Support platforms with CCS engines but no RCS (Matt Roper, Stuart Summers)
- Don't overallocate subslice storage (Matt Roper)
- Reduce stack usage in debugfs due to SSEU (John Harrison)
- Report steering details in debugfs (Matt Roper)
- Refactor some x86-ism out to prepare for non-x86 builds (Michael Cheng)
- add lmem_size modparam (CQ Tang)
- Refactor for non-x86 driver builds (Casey Bowman)
- Centralize computation of freq caps (Ashutosh Dixit)
- Update dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf() (Gwan-gyeong Mun)
- Limit the async bind to bind_async_flags (Matthew Auld)
- Stop checking for NULL vma->obj (Matthew Auld)
- Reduce overzealous alignment constraints for GGTT (Matthew Auld)
- Remove GEN12_SFC_DONE_MAX from register defs header (Matt Roper)
- Fix renamed struct field (Lucas De Marchi)
- Do not return '0' if there is nothing to return (Andi Shyti)
- fix i915_reg_t initialization (Jani Nikula)
- move the migration sanity check (Matthew Auld)
- handle more rounding in selftests (Matthew Auld)
- Perf and i915 query kerneldoc updates (Matt Roper)
- Use i915_probe_error instead of drm_err (Vinay Belgaumkar)
- sanity check object size in the buddy allocator (Matthew Auld)
- fixup selftests min_alignment usage (Matthew Auld)
- tweak selftests misaligned_case (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/i915_vma.c
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ymkfy8FjsG2JrodK@tursulin-mobl2
|
|
First release of GuC for DG2.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
CC: Tomasz Mistat <tomasz.mistat@intel.com>
CC: Ramalingam C <ramalingam.c@intel.com>
CC: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220427165550.3636686-3-John.C.Harrison@Intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-04-22:
amdgpu:
- SMU message documentation update
- Misc code cleanups
- Documenation updates
- PSP TA updates
- Runtime PM regression fix
- SR-IOV header cleanup
- Misc fixes
amdkfd:
- TLB flush fixes
- GWS fixes
- CRIU GWS support
radeon:
- Misc code cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422150049.5859-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.19-2022-04-15:
amdgpu:
- USB-C updates
- GPUVM updates
- TMZ fixes for RV
- DCN 3.1 pstate fixes
- Display z state fixes
- RAS fixes
- Misc code cleanups and spelling fixes
- More DC FP rework
- GPUVM TLB handling rework
- Power management sysfs code cleanup
- Add RAS support for VCN
- Backlight fix
- Add unique id support for more asics
- Misc display updates
- SR-IOV fixes
- Extend CG and PG flags to 64 bits
- Enable VCN clk sysfs nodes for navi12
amdkfd:
- Fix IO link cleanup during device removal
- RAS fixes
- Retry fault fixes
- Asynchronously free events
- SVM fixes
radeon:
- Drop some dead code
- Misc code cleanups
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415135144.5700-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
valid data
With tape devices, the SCF_TREAT_READ_AS_NORMAL flag is used by the target
subsystem to mark commands which have both data to return as well as sense
data. But with pscsi, SCF_TREAT_READ_AS_NORMAL can be set even if there is
no data to return. The SCF_TREAT_READ_AS_NORMAL flag causes the target core
to call iscsit data-in callbacks even if there is no data, which iscsit
does not support. This results in iscsit going into an error state
requiring recovery and being unable to complete the command to the
initiator.
This issue can be resolved by fixing pscsi to only set
SCF_TREAT_READ_AS_NORMAL if there is valid data to return alongside the
sense data.
Link: https://lore.kernel.org/r/20220427183250.291881-1-djeffery@redhat.com
Fixes: bd81372065fa ("scsi: target: transport should handle st FM/EOM/ILI reads")
Reported-by: Scott Hamilton <scott.hamilton@atos.net>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.19/drivers
Pull MD updates from Song:
"1. Improve annotation in raid5 code, by Logan Gunthorpe.
2. Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk.
3. Other small fixes/cleanups."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Replace role magic numbers with defined constants
md/raid0: Ignore RAID0 layout if the second zone has only one device
md/raid5: Annotate functions that hold device_lock with __must_hold
md/raid5-ppl: Annotate with rcu_dereference_protected()
md/raid5: Annotate rdev/replacement access when mddev_lock is held
md/raid5: Annotate rdev/replacement accesses when nr_pending is elevated
md/raid5: Add __rcu annotation to struct disk_info
md/raid5: Un-nest struct raid5_percpu definition
md/raid5: Cleanup setup_conf() error returns
md: replace deprecated strlcpy & remove duplicated line
md/bitmap: don't set sb values if can't pass sanity check
md: fix an incorrect NULL check in md_reload_sb
md: fix an incorrect NULL check in does_sb_need_changing
raid5: introduce MD_BROKEN
md: Set MD_BROKEN for RAID1 and RAID10
|
|
Put device node in error path in fec_enet_init_stop_mode().
Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0 c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26 c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [c000000004d477e0] __schedule at c000000000c70808
#1 [c000000004d478b0] schedule at c000000000c70ee0
#2 [c000000004d478e0] schedule_timeout at c000000000c76dec
#3 [c000000004d479c0] msleep at c0000000002120cc
#4 [c000000004d479f0] napi_disable at c000000000a06448
^^^^^^^^^^^^^^^^
#5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The IDs added here are the subset reserved for 'motherboard down'
designs of DG2. We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).
The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.
Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
|
|
The mib counters for the ksz9477 is same for the ksz9477 switch and
LAN937x switch. Hence moving it to ksz_common.c file in order to have it
generic function. The DSA hook get_stats64 now can call ksz_get_stats64.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220426091048.9311-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Fixes: 3712e7a49459 ("drm/amd/pm: unified lock protections in amdgpu_dpm.c")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Link: https://lore.kernel.org/all/9e689fea-6c69-f4b0-8dee-32c4cf7d8f9c@molgen.mpg.de/
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1957
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 087451f372bf76 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/
Tested-by: Michele Ballabio <ballabio.m@gmail.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add support to checkpoint/restore GWS (Global Wave Sync) queues.
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The dcdbas driver is used to call SMI handlers for both, dcdbas and
dell-smbios-smm. Both drivers allocate a buffer for communicating
with the SMI handler. The physical buffer address is then passed to
the called SMI handler via %ebx.
Unfortunately this doesn't work when running in Xen dom0, as the
physical address obtained via virt_to_phys() is only a guest physical
address, and not a machine physical address as needed by SMI.
The problem in dcdbas is easy to correct, as dcdbas is using
dma_alloc_coherent() for allocating the buffer, and the machine
physical address is available via the DMA address returned in the DMA
handle.
In order to avoid duplicating the buffer allocation code in
dell-smbios-smm, add a generic buffer allocation function to dcdbas
and use it for both drivers. This is especially fine regarding driver
dependencies, as dell-smbios-smm is already calling dcdbas to generate
the SMI request.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220318150950.16843-1-jgross@suse.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Sapphire Rapids (SPR) C6 optimization was added to the end of the
'spr_idle_state_table_update()' function. However, the function has a
'return' which may happen before the optimization has a chance to run.
And this may prevent the optimization from happening.
This is an unlikely scenario, but possible if user boots with, say,
the 'intel_idle.preferred_cstates=6' kernel boot option.
This patch fixes the issue by eliminating the problematic 'return'
statement.
Fixes: 3a9cf77b60dc ("intel_idle: add core C6 optimization for SPR")
Suggested-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Problem description.
When user boots kernel up with the 'intel_idle.preferred_cstates=4' option,
we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order
for C1E to work on SPR, we have to enable the C1E promotion bit on all
CPUs. However, we enable it only on one CPU.
Fix description.
The 'intel_idle' driver already has the infrastructure for disabling C1E
promotion on every CPU. This patch uses the same infrastructure for
enabling C1E promotion on every CPU. It changes the boolean
'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion'
variable.
Tested on a 2-socket SPR system. I verified the following combinations:
* C1E promotion enabled and disabled in BIOS.
* Booted with and without the 'intel_idle.preferred_cstates=4' kernel
argument.
In all 4 cases C1E promotion was correctly set on all CPUs.
Also tested on an old Broadwell system, just to make sure it does not cause
a regression. C1E promotion was correctly disabled on that system, both C1
and C1E were exposed (as expected).
Fixes: da0e58c038e6 ("intel_idle: add 'preferred_cstates' module argument")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for 5.18-rc5 from Viresh Kumar:
"- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov and
Vladimir Zapolskiy).
- Fix memory leak with the Sun501 driver (Xiaobing Luo)."
* tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
cpufreq: qcom-hw: provide online/offline operations
cpufreq: qcom-hw: fix the opp entries refcounting
cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
|
|
Commit e8604b1447b4 introduced a call to the helper function
msi_first_desc(), which needs MSI descriptor mutex lock before
call. However, the required mutex lock was not added. This results in
lockdep assertion:
WARNING: CPU: 4 PID: 119 at kernel/irq/msi.c:274 msi_first_desc+0xd0/0x10c
msi_first_desc+0xd0/0x10c
fsl_mc_msi_domain_alloc_irqs+0x7c/0xc0
fsl_mc_populate_irq_pool+0x80/0x3cc
Fix this by adding the mutex lock and unlock around the function call.
Fixes: e8604b1447b4 ("bus: fsl-mc-msi: Simplify MSI descriptor handling")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220412075636.755454-1-shinichiro.kawasaki@wdc.com
|
|
Current DP driver implementation has adding safe mode done at
dp_hpd_plug_handle() which is expected to be executed under event
thread context.
However there is possible circular locking happen (see blow stack trace)
after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
is executed under drm_thread context.
After review all possibilities methods and as discussed on
https://patchwork.freedesktop.org/patch/483155/, supporting EDID
compliance tests in the driver is quite hacky. As seen with other
vendor drivers, supporting these will be much easier with IGT. Hence
removing all the related fail safe code for it so that no possibility
of circular lock will happen.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
======================================================
WARNING: possible circular locking dependency detected
5.15.35-lockdep #6 Tainted: G W
------------------------------------------------------
frecon/429 is trying to acquire lock:
ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
dp_panel_add_fail_safe_mode+0x4c/0xa0
but task is already holding lock:
ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&kms->commit_lock[i]){+.+.}-{3:3}:
__mutex_lock_common+0x174/0x1a64
mutex_lock_nested+0x98/0xac
lock_crtcs+0xb4/0x124
msm_atomic_commit_tail+0x330/0x748
commit_tail+0x19c/0x278
drm_atomic_helper_commit+0x1dc/0x1f0
drm_atomic_commit+0xc0/0xd8
drm_atomic_helper_set_config+0xb4/0x134
drm_mode_setcrtc+0x688/0x1248
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
-> #2 (crtc_ww_class_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x174/0x1a64
ww_mutex_lock+0xb8/0x278
modeset_lock+0x304/0x4ac
drm_modeset_lock+0x4c/0x7c
drmm_mode_config_init+0x4a8/0xc50
msm_drm_init+0x274/0xac0
msm_drm_bind+0x20/0x2c
try_to_bring_up_master+0x3dc/0x470
__component_add+0x18c/0x3c0
component_add+0x1c/0x28
dp_display_probe+0x954/0xa98
platform_probe+0x124/0x15c
really_probe+0x1b0/0x5f8
__driver_probe_device+0x174/0x20c
driver_probe_device+0x70/0x134
__device_attach_driver+0x130/0x1d0
bus_for_each_drv+0xfc/0x14c
__device_attach+0x1bc/0x2bc
device_initial_probe+0x1c/0x28
bus_probe_device+0x94/0x178
deferred_probe_work_func+0x1a4/0x1f0
process_one_work+0x5d4/0x9dc
worker_thread+0x898/0xccc
kthread+0x2d4/0x3d4
ret_from_fork+0x10/0x20
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
ww_acquire_init+0x1c4/0x2c8
drm_modeset_acquire_init+0x44/0xc8
drm_helper_probe_single_connector_modes+0xb0/0x12dc
drm_mode_getconnector+0x5dc/0xfe8
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
-> #0 (&dev->mode_config.mutex){+.+.}-{3:3}:
__lock_acquire+0x2650/0x672c
lock_acquire+0x1b4/0x4ac
__mutex_lock_common+0x174/0x1a64
mutex_lock_nested+0x98/0xac
dp_panel_add_fail_safe_mode+0x4c/0xa0
dp_hpd_plug_handle+0x1f0/0x280
dp_bridge_enable+0x94/0x2b8
drm_atomic_bridge_chain_enable+0x11c/0x168
drm_atomic_helper_commit_modeset_enables+0x500/0x740
msm_atomic_commit_tail+0x3e4/0x748
commit_tail+0x19c/0x278
drm_atomic_helper_commit+0x1dc/0x1f0
drm_atomic_commit+0xc0/0xd8
drm_atomic_helper_set_config+0xb4/0x134
drm_mode_setcrtc+0x688/0x1248
drm_ioctl_kernel+0x1e4/0x338
drm_ioctl+0x3a4/0x684
__arm64_sys_ioctl+0x118/0x154
invoke_syscall+0x78/0x224
el0_svc_common+0x178/0x200
do_el0_svc+0x94/0x13c
el0_svc+0x5c/0xec
el0t_64_sync_handler+0x78/0x108
el0t_64_sync+0x1a4/0x1a8
Changes in v2:
-- re text commit title
-- remove all fail safe mode
Changes in v3:
-- remove dp_panel_add_fail_safe_mode() from dp_panel.h
-- add Fixes
Changes in v5:
-- to=dianders@chromium.org
Changes in v6:
-- fix Fixes commit ID
Fixes: 8b2c181e3dcf ("drm/msm/dp: add fail safe mode outside of event_mutex context")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1651007534-31842-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
