| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
|
|
The use of set_64bit() in X86_64 only code is pretty pointless, seeing
how it's a direct assignment. Remove all this nonsense.
[nathanchance: unbreak irte]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221022114425.168036718%40infradead.org
|
|
Because endlessly repeating:
set_memory_ro()
set_memory_x()
is getting tedious.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y1jek64pXOsougmz@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are updates of assorted thermal drivers, mostly for ARM
platforms, generally isolated and fairly straightforward, and the
recent Intel HFI driver fix for systems without HFI support.
Specifics:
- Avoid clearing the HFI status bit on systems without HFI support
which triggers unchecked MSR access errors (Srinivas Pandruvada)
- Add sm8450 and sm8550 QCom compatible string to DT bindings (Luca
Weiss, Neil Armstrong)
- Use devm_platform_get_and_ioremap_resource on the ST platform to
group two calls into a single one (Minghao Chi)
- Use GENMASK instead of bitmaps and validate the temperature after
reading it in the imx8mm_thermal driver (Marcus Folkesson)
- Convert generic-adc-thermal to DT schema (Rob Herring)
- Fix debug print message with inverted logic in the k3_j72xx_bandgap
driver (Keerthy)
- Fix memory leak on thermal_of_zone_register() failure (Ido
Schimmel)
- Add support for IPQ8074 in the tsens thermal driver along with the
DT bindings (Robert Marko)
- Fix and rework the debugfs code in the tsens driver (Christian
Marangi)
- Add calibration and DT documentation for the imx8mm driver (Marek
Vasut)
- Add DT bindings and compatible for the Mediatek SoCs mt7981 and
mt7983 (Daniel Golle)
- Don't show an error message if it happens at probe time while it
will be deferred on the QCom SPMI ADC driver (Johan Hovold)
- Add HWMon support for the imx8mm board (Alexander Stein)
- Remove pointless include from the power allocator governor
(Christophe JAILLET)
- Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
(Krzysztof Kozlowski)
- Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)
- Demote error log of thermal zone register to debug in the tsens
QCom driver (Manivannan Sadhasivam)
- Consolidate the the efuse values and the errata handling in the TI
Bandgap driver (Bryan Brattlof)
- Document Renesas RZ/Five as compatible with RZ/G2UL in the DT
bindings (Lad Prabhakar)
- Fix the irq handler return value in the LMh driver (Bjorn
Andersson)
- Delete empty platform remove callback from imx_sc_thermal (Uwe
Kleine-König)"
* tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
thermal/drivers/imx_sc_thermal: Drop empty platform remove function
thermal/drivers/qcom/lmh: Fix irq handler return value
dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
dt-bindings: thermal: k3-j72xx: elaborate on binding description
thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function
thermal/drivers/qcom: Demote error log of thermal zone register to debug
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450
thermal/core/power allocator: Remove a useless include
thermal/drivers/imx8mm: Add hwmon support
thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC
thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
thermal/drivers/imx: Add support for loading calibration data from OCOTP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a new GPIO multiplexer driver, bunch of driver updates and
refactoring in the core GPIO library.
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
the number of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
controller, Freescale PCIe and Ethernet controller, Himax LCDs and
Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new
helpers, minor tweaks and fixes, making fwnode usage consistent
etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer
dereference in the kernel by opening a device file, forcing a
driver unbind and then calling one of the syscalls on the
associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected
to other GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers
and use this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems
property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers"
* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
gpio: sim: set a limit on the number of GPIOs
gpiolib: protect the GPIO device against being dropped while in use by user-space
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: Provide to_gpio_device() helper
gpiolib: Unify access to the device properties
gpio: Do not include <linux/kernel.h> when not really needed.
gpio: pcf857x: Convert to i2c's .probe_new()
gpio: pca953x: Convert to i2c's .probe_new()
gpio: max732x: Convert to i2c's .probe_new()
dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
gpiolib: ensure that fwnode is properly set
gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
gpiolib: of: Use correct fwnode for DT-probed chips
gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
gpiolib: add support for software nodes
gpiolib: consolidate GPIO lookups
gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
...
|
|
Merge additional ACPI EC driver fixes for 6.2-rc1:
- Fix EC address space handler unregistration (Hans de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
* acpi-ec:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The most relevant change are the patches from Dmitry Torokhov to
switch omapfb to the gpiod API.
The other patches are small and fix e.g. UML build issues, improve the
error paths and cleanup code"
* tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf()
fbdev: uvesafb: use sysfs_emit() to instead of scnprintf()
fbdev: uvesafb: Simplify uvesafb_remove()
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
fbdev: uvesafb: don't build on UML
fbdev: geode: don't build on UML
fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
fbdev: matroxfb: Convert to i2c's .probe_new()
fbdev: da8xx-fb: add missing regulator_disable() in fb_probe
fbdev: controlfb: fix spelling mistake "paramaters"->"parameters"
fbdev: vermilion: decrease reference count in error path
fbdev: smscufx: fix error handling code in ufx_usb_probe
fbdev: via: Fix error in via_core_init()
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: pxafb: Remove unnecessary print function dev_err()
fbdev: omapfb: panel-sharp-ls037v7dw01: fix included headers
fbdev: omapfb: panel-tpo-td028ttec1: stop including gpio.h
fbdev: omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
fbdev: omapfb: encoder-opa362: fix included headers
...
|
|
Merge additional ACPICA changes for 6.2-rc1:
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
* acpica:
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
Update the reported maximum shader clock to the value which can
be guarded to be achieved on all cards. This is to align with
Window setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
Correct the pstate standard/peak profiling mode clock settings
for SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
To better support UMD pstate profilings, the GPO feature needs
to be switched on/off accordingly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
Move the conditional code into a function, with two varients so it is
harder to make these kinds of mistakes.
drivers/infiniband/sw/rxe/rxe_resp.c: In function 'atomic_write_reply':
drivers/infiniband/sw/rxe/rxe_resp.c:794:13: error: unused variable 'payload' [-Werror=unused-variable]
794 | int payload = payload_size(pkt);
| ^~~~~~~
drivers/infiniband/sw/rxe/rxe_resp.c:793:24: error: unused variable 'mr' [-Werror=unused-variable]
793 | struct rxe_mr *mr = qp->resp.mr;
| ^~
drivers/infiniband/sw/rxe/rxe_resp.c:791:19: error: unused variable 'dst' [-Werror=unused-variable]
791 | u64 src, *dst;
| ^~~
drivers/infiniband/sw/rxe/rxe_resp.c:791:13: error: unused variable 'src' [-Werror=unused-variable]
791 | u64 src, *dst;
Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service")
Link: https://lore.kernel.org/linux-rdma/Y5s+EVE7eLWQqOwv@nvidia.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit fc7a6209d571 ("bus: Make remove callback return void")
forces bus_type::remove be void-returned, it doesn't make much sense for
any bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for xen bus based drivers.
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In the blamed commit, it was not noticed that one implementation of
chip->info->ops->phylink_get_caps(), called by mv88e6xxx_get_caps(),
may access hardware registers, and in doing so, it takes the
mv88e6xxx_reg_lock(). Namely, this is mv88e6352_phylink_get_caps().
This is a problem because mv88e6xxx_get_caps(), apart from being
a top-level function (method invoked by dsa_switch_ops), is now also
directly called from mv88e6xxx_setup_port(), which runs under the
mv88e6xxx_reg_lock() taken by mv88e6xxx_setup(). Therefore, when running
on mv88e6352, the reg_lock would be acquired a second time and the
system would deadlock on driver probe.
The things that mv88e6xxx_setup() can compete with in terms of register
access with are the IRQ handlers and MDIO bus operations registered by
mv88e6xxx_probe(). So there is a real need to acquire the register lock.
The register lock can, in principle, be dropped and re-acquired pretty
much at will within the driver, as long as no operations that involve
waiting for indirect access to complete (essentially, callers of
mv88e6xxx_smi_direct_wait() and mv88e6xxx_wait_mask()) are interrupted
with the lock released. However, I would guess that in mv88e6xxx_setup(),
the critical section is kept open for such a long time just in order to
optimize away multiple lock/unlock operations on the registers.
We could, in principle, drop the reg_lock right before the
mv88e6xxx_setup_port() -> mv88e6xxx_get_caps() call, and
re-acquire it immediately afterwards. But this would look ugly, because
mv88e6xxx_setup_port() would release a lock which it didn't acquire, but
the caller did.
A cleaner solution to this issue comes from the observation that struct
mv88e6xxxx_ops methods generally assume they are called with the
reg_lock already acquired. Whereas mv88e6352_phylink_get_caps() is more
the exception rather than the norm, in that it acquires the lock itself.
Let's enforce the same locking pattern/convention for
chip->info->ops->phylink_get_caps() as well, and make
mv88e6xxx_get_caps(), the top-level function, acquire the register lock
explicitly, for this one implementation that will access registers for
port 4 to work properly.
This means that mv88e6xxx_setup_port() will no longer call the top-level
function, but the low-level mv88e6xxx_ops method which expects the
correct calling context (register lock held).
Compared to chip->info->ops->phylink_get_caps(), mv88e6xxx_get_caps()
also fixes up the supported_interfaces bitmap for internal ports, since
that can be done generically and does not require per-switch knowledge.
That's code which will no longer execute, however mv88e6xxx_setup_port()
doesn't need that. It just needs to look at the mac_capabilities bitmap.
Fixes: cc1049ccee20 ("net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports")
Reported-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Maksim Kiselev <bigunclemax@gmail.com>
Link: https://lore.kernel.org/r/20221214110120.3368472-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch fixes the error "ravb 11c20000.ethernet eth0: failed to switch
device to config mode" during unbind.
We are doing register access after pm_runtime_put_sync().
We usually do cleanup in reverse order of init. Currently in
remove(), the "pm_runtime_put_sync" is not in reverse order.
Probe
reset_control_deassert(rstc);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
remove
pm_runtime_put_sync(&pdev->dev);
unregister_netdev(ndev);
..
ravb_mdio_release(priv);
pm_runtime_disable(&pdev->dev);
Consider the call to unregister_netdev()
unregister_netdev->unregister_netdevice_queue->rollback_registered_many
that calls the below functions which access the registers after
pm_runtime_put_sync()
1) ravb_get_stats
2) ravb_close
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221214105118.2495313-1-biju.das.jz@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We should set the return value to -ENOMEM explicitly when
create_singlethread_workqueue() fails in stmmac_dvr_probe(),
otherwise we'll lose the error value.
Fixes: a137f3f27f92 ("net: stmmac: fix possible memory leak in stmmac_dvr_probe()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221214080117.3514615-1-cuigaosheng1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating the operating mode as part of regulator enable, the caller
has already locked the regulator tree and drms_uA_update() must not try
to do the same in order not to trigger a deadlock.
The lock inversion is reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221215 #142 Not tainted
------------------------------------------------------
udevd/154 is trying to acquire lock:
ffffc11f123d7e50 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x280
but task is already holding lock:
ffff80000e4c36e8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable+0x34/0x80
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
*** DEADLOCK ***
just before probe of a Qualcomm UFS controller (occasionally) deadlocks
when enabling one of its regulators.
Fixes: 9243a195be7a ("regulator: core: Change voltage setting path")
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221215104646.19818-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4ad8 ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221213125614.927754-1-lizetao1@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix a slab-out-of-bounds read that occurs in nla_put() called from
nfc_genl_send_target() when target->sensb_res_len, which is duplicated
from an nfc_target in pn533, is too large as the nfc_target is not
properly initialized and retains garbage values. Clear nfc_targets with
memset() before they are used.
Found by a modified version of syzkaller.
BUG: KASAN: slab-out-of-bounds in nla_put
Call Trace:
memcpy
nla_put
nfc_genl_dump_targets
genl_lock_dumpit
netlink_dump
__netlink_dump_start
genl_family_rcv_msg_dumpit
genl_rcv_msg
netlink_rcv_skb
genl_rcv
netlink_unicast
netlink_sendmsg
sock_sendmsg
____sys_sendmsg
___sys_sendmsg
__sys_sendmsg
do_syscall_64
Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection")
Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before enetc_clean_rx_ring_xdp() calls xdp_do_redirect(), each software
BD in the RX ring between index orig_i and i can have one of 2 refcount
values on its page.
We are the owner of the current buffer that is being processed, so the
refcount will be at least 1.
If the current owner of the buffer at the diametrically opposed index
in the RX ring (i.o.w, the other half of this page) has not yet called
kfree(), this page's refcount could even be 2.
enetc_page_reusable() in enetc_flip_rx_buff() tests for the page
refcount against 1, and [ if it's 2 ] does not attempt to reuse it.
But if enetc_flip_rx_buff() is put after the xdp_do_redirect() call,
the page refcount can have one of 3 values. It can also be 0, if there
is no owner of the other page half, and xdp_do_redirect() for this
buffer ran so far that it triggered a flush of the devmap/cpumap bulk
queue, and the consumers of those bulk queues also freed the buffer,
all by the time xdp_do_redirect() returns the execution back to enetc.
This is the reason why enetc_flip_rx_buff() is called before
xdp_do_redirect(), but there is a big flaw with that reasoning:
enetc_flip_rx_buff() will set rx_swbd->page = NULL on both sides of the
enetc_page_reusable() branch, and if xdp_do_redirect() returns an error,
we call enetc_xdp_free(), which does not deal gracefully with that.
In fact, what happens is quite special. The page refcounts start as 1.
enetc_flip_rx_buff() figures they're reusable, transfers these
rx_swbd->page pointers to a different rx_swbd in enetc_reuse_page(), and
bumps the refcount to 2. When xdp_do_redirect() later returns an error,
we call the no-op enetc_xdp_free(), but we still haven't lost the
reference to that page. A copy of it is still at rx_ring->next_to_alloc,
but that has refcount 2 (and there are no concurrent owners of it in
flight, to drop the refcount). What really kills the system is when
we'll flip the rx_swbd->page the second time around. With an updated
refcount of 2, the page will not be reusable and we'll really leak it.
Then enetc_new_page() will have to allocate more pages, which will then
eventually leak again on further errors from xdp_do_redirect().
The problem, summarized, is that we zeroize rx_swbd->page before we're
completely done with it, and this makes it impossible for the error path
to do something with it.
Since the packet is potentially multi-buffer and therefore the
rx_swbd->page is potentially an array, manual passing of the old
pointers between enetc_flip_rx_buff() and enetc_xdp_free() is a bit
difficult.
For the sake of going with a simple solution, we accept the possibility
of racing with xdp_do_redirect(), and we move the flip procedure to
execute only on the redirect success path. By racing, I mean that the
page may be deemed as not reusable by enetc (having a refcount of 0),
but there will be no leak in that case, either.
Once we accept that, we have something better to do with buffers on
XDP_REDIRECT failure. Since we haven't performed half-page flipping yet,
we won't, either (and this way, we can avoid enetc_xdp_free()
completely, which gives the entire page to the slab allocator).
Instead, we'll call enetc_xdp_drop(), which will recycle this half of
the buffer back to the RX ring.
Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT")
Suggested-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221213001908.2347046-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CFI test uses the branch-protection=none compiler attribute to
disable PAC return address protection on a function. While newer GCC
versions support this attribute, older versions (GCC 7 and 8) instead
supported the sign-return-address=none attribute, leading to a build
failure when the test is built with older compilers. Fix it by checking
which attribute is supported and using the correct one.
Fixes: 2e53b877dc12 ("lkdtm: Add CFI_BACKWARD to test ROP mitigations")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/CAEUSe78kDPxQmQqCWW-_9LCgJDFhAeMoVBFnX9QLx18Z4uT4VQ@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the T-Head PMU via the perf subsystem
- ftrace support for rv32
- Support for non-volatile memory devices
- Various fixes and cleanups
* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
Documentation: RISC-V: patch-acceptance: s/implementor/implementer
Documentation: RISC-V: Mention the UEFI Standards
Documentation: RISC-V: Allow patches for non-standard behavior
Documentation: RISC-V: Fix a typo in patch-acceptance
riscv: Fixup compile error with !MMU
riscv: Fix P4D_SHIFT definition for 3-level page table mode
riscv: Apply a static assert to riscv_isa_ext_id
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
riscv: mm: call best_map_size many times during linear-mapping
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
riscv: boot: add zstd support
...
|
|
This reverts commit f9d00a4a8dc8fff951c97b3213f90d6bc7a72175.
This causes problem for KFD because when we overcommit we accidentially
bind the BO to GTT for moving it into VRAM. We also need to make sure
that this is done only as fallback after trying to evict first.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the "domain" argument to amdgpu_bo_create_kernel_at() since this
function takes an "offset" argument which is the offset off of VRAM, and as
such allocation always takes place in VRAM. Thus, the "domain" argument is
unnecessary.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the
requested memory exists, else we get a kernel oops when dereferencing "man".
v2: Make the patch standalone, i.e. not dependent on local patches.
v3: Preserve old behaviour and just check that the manager pointer is not
NULL.
v4: Complain if GTT domain requested and it is uninitialized--most likely a
bug.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Always check if fru_addr is not NULL. This commit also fixes a "smatch"
warning.
v2: Add a Fixes tag.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Fixes: afbe5d1e4bd7c7 ("drm/amdgpu: Bug-fix: Reading I2C FRU data on newer ASICs")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Optimise away self-test overhead when they are disabled
- Support symmetric encryption via keyring keys in af_alg
- Flip hwrng default_quality, the default is now maximum entropy
Algorithms:
- Add library version of aesgcm
- CFI fixes for assembly code
- Add arm/arm64 accelerated versions of sm3/sm4
Drivers:
- Remove assumption on arm64 that kmalloc is DMA-aligned
- Fix selftest failures in rockchip
- Add support for RK3328/RK3399 in rockchip
- Add deflate support in qat
- Merge ux500 into stm32
- Add support for TEE for PCI ID 0x14CA in ccp
- Add mt7986 support in mtk
- Add MaxLinear platform support in inside-secure
- Add NPCM8XX support in npcm"
* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
crypto: ux500/cryp - delete driver
crypto: stm32/cryp - enable for use with Ux500
crypto: stm32 - enable drivers to be used on Ux500
dt-bindings: crypto: Let STM32 define Ux500 CRYP
hwrng: geode - Fix PCI device refcount leak
hwrng: amd - Fix PCI device refcount leak
crypto: qce - Set DMA alignment explicitly
crypto: octeontx2 - Set DMA alignment explicitly
crypto: octeontx - Set DMA alignment explicitly
crypto: keembay - Set DMA alignment explicitly
crypto: safexcel - Set DMA alignment explicitly
crypto: hisilicon/hpre - Set DMA alignment explicitly
crypto: chelsio - Set DMA alignment explicitly
crypto: ccree - Set DMA alignment explicitly
crypto: ccp - Set DMA alignment explicitly
crypto: cavium - Set DMA alignment explicitly
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
crypto: arm64/ghash-ce - use frame_push/pop macros consistently
crypto: arm64/crct10dif - use frame_push/pop macros consistently
crypto: arm64/aes-modes - use frame_push/pop macros consistently
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit a5a923038d70 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font().
Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498 [1]
Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When the remove() function is called, we know that the probe() function has
successfully been executed. So 'info' is known to be not NULL.
Simplify the code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.
This has been added in the remove function in commit 63e28a7a5ffc
("uvesafb: Clean up MTRR code")
Fixes: 8bdb3a2d7df4 ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
807 | if (__supported_pte_mask & _PAGE_NX) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.
Prevents these build errors:
In file included from ../arch/x86/include/asm/olpc.h:7:0,
from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
(boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
(boot_cpu_data.x86_model == 10));
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.
Fixes: 0937a7b3625d ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The error handling code in fb_probe misses regulator_disable if
regulator_enable is called successfully. The previous commit only
adds regulator_disable in the .remove(), forgetting the error
handling code in the .probe.
Fix this by adding a new error label to call regulator_disable.
Fixes: 611097d5daea("fbdev: da8xx: add support for a regulator")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
There is a spelling mistake in comment. Fix it.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.
Fixes: dbe7e429fedb ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.
My local syzkaller reports a memory leak bug:
memory leak in ufx_usb_probe
BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
hex dump (first 32 bytes):
80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff .!|.............
00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00 ................
backtrace:
[<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
[<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
[<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
[<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
[<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
[<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
[<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
[<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
[<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
[<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
[<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
[<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
[<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
[<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
[<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
[<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
Fix this bug by rewriting the error handling code in ufx_usb_probe.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Tested-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
via_core_init() won't exit the driver when pci_register_driver() failed.
Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.
VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...
Fixes: 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add missing pci_disable_device() in error path of probe() and remove() path.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Eliminate the follow coccicheck warning:
./drivers/video/fbdev/pxafb.c:2330:2-9: line 2330 is redundant because
platform_get_irq() already prints an error
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The driver is using gpiod API so it should include gpio/consumer.h and
not gpio.gh or of_gpio.h.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The driver does not use gpios, so there is no need to include gpio.h.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
With f048e8c1d169 ("omapfb: panel-lgphilips-lb035q02: Remove legacy boot
support") it is no longer possible to specify GPIO to control the
backlight. Remove code trying to request and toggle it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The driver has been switched to gpiod API, so it should include
gpio/consumer.h instead of gpio.h and of_gpio.h.
With of_gpio.h no longer included we need mod_devicetable.h for
of_device_id definition.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
