summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-06-29drm/amdgpu: correct define SMU_EnabledFeatureScoreboard_SclkDpmOnSonny Jiang
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: allocate ip_block_enabled memory in common codeAlex Deucher
Remove duplication across asic families and make it symmetric with the freeing of the code in amdgpu_device.c Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: remove unnecessary check before kfreeManinder Singh
kfree(NULL) is safe and this check is probably not required Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Reviewed-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: use kzalloc for allocating one thingManinder Singh
Use kzalloc rather than kcalloc(1.. for allocating one thing. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Reviewed-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/radeon: fix adding all VAs to the freed list on remove v2Christian König
We only should do so when the BO_VA was actually mapped. Otherwise we get a nice error message on the next CS. v2: It actually doesn't matter if it was invalidated or not, if it was mapped we need to clear the area where it was mapped. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: add chunk id validity checkChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: fix crash on invalid CS IOCTLChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: reset wptr at cp compute resume (v2)Sonny Jiang
This patch is to resolve compute hang at resume time. v2: (agd5f) squash in second fix Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-29drm/amdgpu: check VCE feedback and bitstream indexChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29drm/amdgpu: make VCE handle check more strictChristian König
Port of radeon commit 29c63fe22a17c64e54016040cd882481bd45ee5a. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29drm/amdgpu: check VCE relocation buffer rangeChristian König
port of radeon commit 2fc5703abda201f138faf63bdca743d04dbf4b1a. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29drm/amdgpu: silence invalid error messageChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com>
2015-06-29drm/amdgpu: fix wrong typemonk.liu
Signed-off-by: monk.liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-29drm/amdgpu: print the bo_list in the CS trace point as wellChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29drm/amdgpu: add amdgpu_bo_list_set trace pointChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29drm/amdgpu: add BO map/unmap trace pointChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29drm/amdgpu: simplify fence debugfs output a bitChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <aleander.deucher@amd.com>
2015-06-29drm/radeon: SDMA fix hibernation (CI GPU family).Jérôme Glisse
In order for hibernation to reliably work we need to properly turn off the SDMA block, sadly after numerous attemps i haven't not found proper sequence for clean and full shutdown. So simply reset both SDMA block, this makes hibernation works reliably on sea island GPU family (CI) Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Cc: stable@vger.kernel.org Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/radeon: compute ring fix hibernation (CI GPU family) v2.Jérôme Glisse
In order for hibernation to reliably work we need to cleanup more thoroughly the compute ring. Hibernation is different from suspend resume as when we resume from hibernation the hardware is first fully initialize by regular kernel then freeze callback happens (which correspond to a suspend inside the radeon kernel driver) and turn off each of the block. It turns out we were not cleanly shutting down the compute ring. This patch fix that. Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Changed since v1: - Factor the ring stop logic into a function taking ring as arg. Cc: stable@vger.kernel.org Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: Configure doorbell to maximum slotsBen Goz
Signed-off-by: Ben Goz <ben.goz@amd.com> Acked-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: Initialize compute sdma and memory from kgdBen Goz
v2: add missing MTYPE_NONCACHED enum Signed-off-by: Ben Goz <ben.goz@amd.com> Acked-by: Oded Gabbay <oded.gabbay@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/radeon: use kzalloc for allocating one thingManinder Singh
Use kzalloc for allocating one thing rather than kcalloc(1... The semantic patch that makes this change is as follows: // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/amdgpu: fix hpd range check in dce_v8_0_hpd_irq()Alex Deucher
Spotted by Dan Carpenter. This is a slight variant of his fix. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-29drm/i915: fix backlight after resume on 855gmJani Nikula
Some 855gm models (at least ThinkPad X40) regressed because of commit b0cd324faed23d10d66ba6ade66579c681feef6f Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 12 16:25:43 2014 +0200 drm/i915: don't save/restore backlight hist ctl registers which tried to make our driver more robust by not blindly saving and restoring registers, but it failed to take into account commit 0eb96d6ed38430b72897adde58f5477a6b71757a Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Oct 14 12:33:41 2009 -0700 drm/i915: save/restore BLC histogram control reg across suspend/resume Fix the regression by enabling hist ctl on gen2. v2: Improved the comment. v3: Improved the comment, again. Reported-and-tested-by: Philipp Gesang <phg@phi-gamma.net> References: http://mid.gmane.org/20150623222648.GD12335@acheron Fixes: b0cd324faed2 ("drm/i915: don't save/restore backlight hist ctl registers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-29agp/intel: Fix typo in needs_ilk_vtd_wa()Chris Wilson
In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against the ids for the mobile GPU and the mobile host bridge. That latter is impossible and so likely was just a typo for the desktop GPU device id (which is also buggy). Fixes commit da88a5f7f7d434e2cde1b3e19d952e6d84533662 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 13 09:31:53 2013 +0000 drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK Reported-by: Ting-Wei Lan <lantw44@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127 References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-29watchdog: gpio_wdt: Add option for early registrationJean-Baptiste Theou
In some situation, mainly when it's not possible to disable a watchdog, you may want the watchdog driver to be started as soon as possible. Adding GPIO_WATCHDOG_ARCH_INITCALL to raise initcall from module_init to arch_initcall. This patch require watchdog registration deferral mechanism Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29watchdog: watchdog_core: Add watchdog registration deferral mechanismJean-Baptiste Theou
Currently, watchdog subsystem require the misc subsystem to register a watchdog. This may not be the case in case of an early registration of a watchdog, which can be required when the watchdog cannot be disabled. This patch introduces a deferral mechanism to remove this requirement. Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29watchdog: max63xx: dynamically allocate deviceVivien Didelot
This patch removes the static watchdog device for a new max63xx_wdt data structure, and constifies the max63xx_timeout data. The new structure contains pointers to pin access routines, which abstracts mmap-specific code. This will ease future accesses like GPIO. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29crypto: qat - Deletion of unnecessary checks before two function callsMarkus Elfring
The functions kfree() and release_firmware() test whether their argument is NULL and then return immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-28net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYsFlorian Fainelli
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO management controller which will make the initial read or write to them to fail and return 0xffff. This is a real issue as the typical first thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id() to register a driver for these PHYs. Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this workaround for the MDIO bus controller consists in scanning the list of PHYs to do this initial read workaround for as part of the MDIO bus reset routine which is invoked prior to mdiobus_scan(). Once we have a proper PHY driver/device registered, all workarounds are located there (e.g: power management suspend/resume calls). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: bcmgenet: workaround initial read failures for integrated PHYsFlorian Fainelli
All BCM7xxx integrated Gigabit PHYs have an issue in their MDIO management controller which will make the initial read or write to them to fail and return 0xffff. This is a real issue as the typical first thing we do is read from MII_PHYSID1 and MII_PHYSID2 from get_phy_id() to register a driver for these PHYs. Coupled with the workaround in drivers/net/phy/bcm7xxx.c, this workaround for the MDIO bus controller consists in scanning the list of PHYs to do this initial read workaround for as part of the MDIO bus reset routine which is invoked prior to mdiobus_scan(). Once we have a proper PHY driver/device registered, all workarounds are located there (e.g: power management suspend/resume calls). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: bcm7xxx: workaround MDIO management controller initial readFlorian Fainelli
The initial MDIO read or write towards the BCM7xxx integrated PHY may fail, workaround this by inserting a dummy MII_BMSR read to force the MDIO management controller to see at least one valid transaction and get out of stuck state out of reset. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28bnx2x: fix DMA API usageMichal Schmidt
With CONFIG_DMA_API_DEBUG=y bnx2x triggers the error "DMA-API: device driver frees DMA memory with wrong function". On archs where PAGE_SIZE > SGE_PAGE_SIZE it also triggers "DMA-API: device driver frees DMA memory with different size". Fix this by making the mapping and unmapping symmetric: - Do not map the whole pool page at once. Instead map the SGE_PAGE_SIZE-sized pieces individually, so they can be unmapped in the same manner. - What's mapped using dma_map_page() must be unmapped using dma_unmap_page(). Tested on ppc64. Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_set_mask" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-rhine.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_sync_single_for_cpu" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/via/via-velocity.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/net/ethernet/via/via-velocity.ko] undefined! Before, the symbols depended implicitly on HAS_DMA through PCI or USE_OF. Add explicit dependencies on HAS_DMA to fix this. Fixes: b7d3282a245f4428 ("net: via/Kconfig: replace USE_OF with OF_???") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-06-26 This series contains fixes for igb, e1000e and i40evf. Todd disables IPv6 extension header processing due to a hardware errata and bumps the driver version. Yanir provides six fixes for e1000e. First is a fix for a locking issue where we were not always taking the pci_bus_sem semaphore all the time when calling pci_disable_link_state_locked(), so fix the code to only call pci_disable_link_state_locked() when the semaphore has been acquired, otherwise call pci_disable_link_state(). A previous fix for i219 where the hardware prevented ULP entry caused EEE in Sx not the be enabled, so modify the code flow that allows both ULP and EEE in Sx. Fix an issue when running 10/100 full duplex on i219 where CRC errors were occurring by increasing the IPG from 8 to 0xC as per the hardware developers. Fix a data corruption issue found on some platforms by increasing the minimum gap between the PHY FIFO read and write pointers. Fix i219, which does not require the K1 workaround for LPT devices. Mitch provides a i40evf fix for a panic when changing MTU. Down was requesting queue disables, but then exited immediately without waiting for the queues to actually be disabled. This could allow any function called after i40evf_down() to run immediately, including i40evf_up(), and causes a memory leak. Fixed the issue by removing the whole reinit_locked function which allows for the driver to handle the state changes by requesting reset from the periodic timer. The second fix resolves an issue where RSS was being configured as though it is using the maximum number of queue. This can cause the device to drop a lot of receive traffic, as the packets get assigned to non-functional queues. This is resolved by only configuring RSS with the number of active queues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net/phy: tune get_phy_c45_ids to support more c45 phyShengzhou Liu
As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have zero Devices In package, current driver can't get correct devices_in_package value by non-zero Devices In package. so let's probe more with zero Devices In package to support more C45 PHYs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28bnx2x: fix lockdep splatEric Dumazet
Michel reported following lockdep splat [ 44.718117] INFO: trying to register non-static key. [ 44.723081] the code is fine but needs lockdep annotation. [ 44.728559] turning off the locking correctness validator. [ 44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0 [ 44.770289] Call Trace: [ 44.772741] [<ffffffff816eb1cd>] dump_stack+0x4c/0x65 [ 44.777879] [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510 [ 44.783708] [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10 [ 44.789538] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.795276] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.801967] [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10 [ 44.807793] [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250 [ 44.814142] [<ffffffff81112ba6>] lock_acquire+0xb6/0x290 [ 44.819537] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.824844] [<ffffffff810d66ad>] flush_work+0x3d/0x280 [ 44.830061] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.835366] [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20 [ 44.841889] [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50 [ 44.847365] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.853102] [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0 [ 44.859359] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.866045] [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0 [ 44.872048] [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x] [ 44.878481] [<ffffffff810d8670>] cancel_work_sync+0x10/0x20 [ 44.884134] [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x] [ 44.890829] [<ffffffff8110ce02>] ? up+0x32/0x50 [ 44.895439] [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0 [ 44.901005] [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x] [ 44.907527] [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0 [ 44.912921] [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x] [ 44.919879] [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x] [ 44.926664] [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40 [ 44.932148] [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20 [ 44.937364] [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630 [ 44.942582] [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70 [ 44.947972] [<ffffffff815ac013>] sock_ioctl+0x73/0x280 [ 44.953192] [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0 [ 44.958587] [<ffffffff8110d0b3>] ? up_read+0x23/0x40 [ 44.963631] [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0 [ 44.969105] [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0 [ 44.974149] [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync() Fixes: eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michal Kalderon <Michal.Kalderon@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: David Decotigny <decot@google.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: fec: don't access RACC register when not availableGreg Ungerer
Not all silicon implementations of the Freescale FEC hardware module have the RACC (Receive Accelerator Function) register, so we should not be trying to access it on those that don't. Currently none of the ColdFire based parts with a FEC have it. Support for RACC was introduced by commit 4c09eed9 ("net: fec: Enable imx6 enet checksum acceleration"). A fix was introduced in commit d1391930 ("net: fec: Fix build for MCF5272") that disables its use on the ColdFire M5272 part, but it doesn't fix the general case of other ColdFire parts. To fix we create a quirk flag, FEC_QUIRK_HAS_RACC, and check it before working with the RACC register. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: fix phy link up when limiting speed via device treeMugunthan V N
When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28drivers: net: xgene: Pre-initialize ret in xgene_enet_get_resources()Geert Uytterhoeven
If CONFIG_ACPI=n: drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_get_resources’: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:951: warning: ‘ret’ may be used uninitialized in this function If the driver is bound to a legacy platform device, ret will contain arbitrary data. If it is non-zero, it will be returned to the caller as an error code. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28xen-netfront: Remove the meaningless codeLi, Liang Z
The function netif_set_real_num_tx_queues() will return -EINVAL if the second parameter < 1, so call this function with the second parameter set to 0 is meaningless. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28Merge tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - fix race with device reference versus driver release (Alex Williamson) - add reset hooks and Calxeda xgmac reset for vfio-platform (Eric Auger) - enable vfio-platform for ARM64 (Eric Auger) - tag Baptiste Reynal as vfio-platform sub-maintainer (Alex Williamson) * tag 'vfio-v4.2-rc1' of git://github.com/awilliam/linux-vfio: MAINTAINERS: Add vfio-platform sub-maintainer VFIO: platform: enable ARM64 build VFIO: platform: Calxeda xgmac reset module VFIO: platform: populate the reset function on probe VFIO: platform: add reset callback VFIO: platform: add reset struct and lookup table vfio/pci: Fix racy vfio_device_get_from_dev() call
2015-06-27Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "The main change in this kernel is Casey's generalized LSM stacking work, which removes the hard-coding of Capabilities and Yama stacking, allowing multiple arbitrary "small" LSMs to be stacked with a default monolithic module (e.g. SELinux, Smack, AppArmor). See https://lwn.net/Articles/636056/ This will allow smaller, simpler LSMs to be incorporated into the mainline kernel and arbitrarily stacked by users. Also, this is a useful cleanup of the LSM code in its own right" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits) tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add() vTPM: set virtual device before passing to ibmvtpm_reset_crq tpm_ibmvtpm: remove unneccessary message level. ima: update builtin policies ima: extend "mask" policy matching support ima: add support for new "euid" policy condition ima: fix ima_show_template_data_ascii() Smack: freeing an error pointer in smk_write_revoke_subj() selinux: fix setting of security labels on NFS selinux: Remove unused permission definitions selinux: enable genfscon labeling for sysfs and pstore files selinux: enable per-file labeling for debugfs files. selinux: update netlink socket classes signals: don't abuse __flush_signals() in selinux_bprm_committed_creds() selinux: Print 'sclass' as string when unrecognized netlink message occurs Smack: allow multiple labels in onlycap Smack: fix seq operations in smackfs ima: pass iint to ima_add_violation() ima: wrap event related data to the new ima_event_data structure integrity: add validity checks for 'path' parameter ...
2015-06-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
2015-06-27drivers/block/nvme-core.c: fix build with gcc-4.4.4Andrew Morton
gcc-4.4.4 (and possibly other versions) fail the compile when initializers are used with anonymous unions. Work around this. drivers/block/nvme-core.c: In function 'nvme_identify_ctrl': drivers/block/nvme-core.c:1163: error: unknown field 'identify' specified in initializer drivers/block/nvme-core.c:1163: warning: missing braces around initializer drivers/block/nvme-core.c:1163: warning: (near initialization for 'c.<anonymous>') drivers/block/nvme-core.c:1164: error: unknown field 'identify' specified in initializer drivers/block/nvme-core.c:1164: warning: excess elements in struct initializer drivers/block/nvme-core.c:1164: warning: (near initialization for 'c') ... This patch has no effect on text size with gcc-4.8.2. Fixes: d29ec8241c10eac ("nvme: submit internal commands through the block layer") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-27Merge branch 'stable/for-jens-4.2' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
2015-06-27NVMe: Fix filesystem deadlock on removalKeith Busch
Move gendisk deletion before controller shutdown so filesystem may sync dirty pages. Before, this would deadlock trying to allocate requests on frozen queues that are about to be deleted. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-27NVMe: Failed controller initialization fixesKeith Busch
This fixes an infinite device reset loop that may occur on devices that fail initialization. If the drive fails to become ready for any reason that does not involve an admin command timeout, the probe task should assume the drive is unavailable and remove it from the topology. In the case an admin command times out during device probing, the driver's existing reset action will handle removing the drive. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-27NVMe: Unify controller probe and resumeKeith Busch
This unifies probe and resume so they both may be scheduled in the same way. This is necessary for error handling that may occur during device initialization since the task to cleanup the device wouldn't be able to run if it is blocked on device initialization. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-27NVMe: Don't use fake status on cancelled commandKeith Busch
Synchronized commands do different things for timed out commands vs. controller returned errors. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit (git 2.34.1) at 2025-09-15 07:58:05 +0000