| Age | Commit message (Collapse) | Author |
|---|
|
With recent CQ handling improvements we can now move the locking into
__nvme_submit_cmd. Also remove the local tail variable to make the code
more obvious, remove the __ prefix in the name, and fix the comments
describing the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
|
|
The block layer's timeout handling currently prevents drivers from
completing commands outside the timeout callback once blk-mq decides
they've expired. If a device breaks, this could potentially create many
thousands of timed out commands. There's nothing of value to be gleaned
from observing each of those messages, so this patch adds a rate limit
on them.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The current checks for whether a new controller request "matches" an
existing controller ignores controller state and checks identity strings.
There are cases where an existing controller may be in its last steps of
deletion when they are "matched" by a new connection.
Change the behavior so that the new connection ignores controllers that
are deleted.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"We are switching a bunch of Lenovo devices with Synaptics touchpads
from PS/2 emulation over to native RMI/SMbus.
Given that all commits are marked for stable there is no point
delaying them till next release"
[ Also fix a too-small stack array for i2c communication in elan driver ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c_smbus - fix corrupted stack
Input: synaptics - add Lenovo 80 series ids to SMBus
Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
|
|
Add GLINK subdevice to allow definition of GLINK edge as a
child of modem-pil.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
From SDM845, the Q6SS reset sequence on software side has been
simplified with the introduction of boot FSM which assists in
bringing the Q6 out of reset.
SDM845 brings a new reset signal ALT_RESET which is a part of
the MSS subsystem hence requires reset clks to be enabled before
assert/deassert. Use the SoC specific reset helper function to
add support for ALT_RESET in SDM845.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Adding reset assert/deassert helper functions to handle SoC
specific reset sequences. This wil be used by SDM845 to assert and
deassert ALT_RESET and MSS_RESET signals.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-next
- Build amdkfd's related files inside amdgpu only if amdkfd is built
- Fix compile warning
- Print info message in case ASIC is not supported by amdkfd
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528110435.GA17960@odedg-x270
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add more HW overlays support
- It enables hardware overlay number 4 and 5. For this,
this patch series adds required clocks.
Several fixups
- Fix default value of zpos according to real hardware overlay number.
- Fix error value of exynos_Drm_crtc_get_by_type function correctly.
- Fix static checker warning of scaler_task_done function.
- Fix signedness bug in fimc_setup_clocks function.
One cleanup
- Disable framedone interrupt of DSI device which is not required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527229919-25665-1-git-send-email-inki.dae@samsung.com
|
|
into drm-fixes
One last fix for 4.17. Fix a suspend regression in DC.
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Fix BUG_ON during CRTC atomic check update
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
core: Add 220us psr setup time (Dhinakaran)
omap: Fix NULL deref (Tomi)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
* tag 'drm-misc-fixes-2018-05-29' of git://anongit.freedesktop.org/drm/drm-misc:
drm/omap: fix NULL deref crash with SDI displays
drm/psr: Fix missed entry in PSR setup time table.
|
|
As we keep the offloaded TC rules for NIC and e-switch in two different
places, make sure to return the number of offloaded flows according
to the use-case and not blindly from the priv.
Fixes: 655dc3d2b91b ('net/mlx5e: Use shared table for offloaded TC eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size
should equal the actual buffer size, not the message size.
Otherwise we will trigger the following dma debug warning
"DMA-API: device driver frees DMA memory with different size"
Fixes: 537a50574175 ('net/mlx5: FPGA, Add high-speed connection routines')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Properly initialize dma direction on fpga conn send.
Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL).
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In the case that the reported max number of QPs capability
equals to zero, abort FPGA init.
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add print of the following values on init:
1. ieee vendor id
2. sandbox product id
3. sandbox product version
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add device name for Mellanox FPGA devices.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add doxygen comments for enum mlx5_fpga_access_type.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for potential Spectre vector in the new query uAPI
- Fix NULL pointer deref (FDO #106559)
- DMI fix to hide LVDS for Radiant P845 (FDO #105468)
* tag 'drm-intel-fixes-2018-05-29' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/query: nospec expects no more than an unsigned long
drm/i915/query: Protect tainted function pointer lookup
drm/i915/lvds: Move acpi lid notification registration to registration phase
drm/i915: Disable LVDS on Radiant P845
|
|
At the mentioned address there's nothing found. By searching information
on the controller chip still can be found, so update the link to the
resulting page.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Celes has newer touch controller (compared to the controllers used in
older BayTrail-based devices) and so uses the same button mapping as
Samus.
This fixes the issue with mouse button being stuck in pressed state
after the first click.
Reported-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next
Leon Romanovsky says:
====================
Introduce new internal to mlx5 CQE format - mini-CQE. It is a CQE in
compressed form that holds data needed to extra a single full CQE.
It is a stride index, byte count and packet checksum.
====================
* mini_cqe:
IB/mlx5: Introduce a new mini-CQE format
IB/mlx5: Refactor CQE compression response
net/mlx5: Exposing a new mini-CQE format
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This once might have made sense when cache.c was in a different module
from device.c, but today it just obfuscation. Get rid of the wrappers
and call roge_gid_mgmt_init()/cleanup() directly.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The new mini-CQE format includes the stride index, byte count and
packet checksum.
Stride index is needed for striding WQ feature.
This patch exposes this capability and enables its setting
via mlx5 UHW data as part of query device and cq creation.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Refactor CQE compression response to be fully set only
when it`s really supported. There is no change from user
perspective because anyway resp.cqe_comp_caps.max_num was
set to zero.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>W
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
For cases where the CRTC is inactive (DPMS off), where a modeset is not
required, yet the CRTC is still in the atomic state, we should not
attempt to update anything on it.
Previously, we were relying on the modereset_required() helper to check
the above condition. However, the function returns false immediately if
a modeset is not required, ignoring the CRTC's enable/active state
flags. The correct way to filter is by looking at these flags instead.
Fixes: e277adc5a06c "drm/amd/display: Hookup color management functions"
Bugzilla: https://bugs.freedesktop.org/106194
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For cases where the CRTC is inactive (DPMS off), where a modeset is not
required, yet the CRTC is still in the atomic state, we should not
attempt to update anything on it.
Previously, we were relying on the modereset_required() helper to check
the above condition. However, the function returns false immediately if
a modeset is not required, ignoring the CRTC's enable/active state
flags. The correct way to filter is by looking at these flags instead.
Fixes: e277adc5a06c "drm/amd/display: Hookup color management functions"
Bugzilla: https://bugs.freedesktop.org/106194
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DP 1.4 compliance now requires that registers at DP_SINK_COUNT_ESI range
(0x2002-0x2003, 0x200c-0x200f) are read instead of DP_SINK_COUNT range
(0x200-0x2005.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bsg holding a reference to the parent device may result in a crash if a
bsg file handle is closed after the parent device driver has unloaded.
Holding a reference is not really needed: the parent device must exist
between bsg_register_queue and bsg_unregister_queue. Before the device
goes away the caller does blk_cleanup_queue so that all in-flight
requests to the device are gone and all new requests cannot pass beyond
the queue. The queue itself is a refcounted object and it will stay
alive with a bsg file.
Based on analysis, previous patch and changelog from Anatoliy Glagolev.
Reported-by: Anatoliy Glagolev <glagolig@gmail.com>
Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe changes from Christoph:
"Here is the current batch of nvme updates for 4.18, we have a few more
patches in the queue, but I'd like to get this pile into your tree
and linux-next ASAP.
The biggest item is support for file-backed namespaces in the NVMe
target from Chaitanya, in addition to that we mostly small fixes from
all the usual suspects."
* 'nvme-4.18-2' of git://git.infradead.org/nvme:
nvme: fixup memory leak in nvme_init_identify()
nvme: fix KASAN warning when parsing host nqn
nvmet-loop: use nr_phys_segments when map rq to sgl
nvmet-fc: increase LS buffer count per fc port
nvmet: add simple file backed ns support
nvmet: remove duplicate NULL initialization for req->ns
nvmet: make a few error messages more generic
nvme-fabrics: allow duplicate connections to the discovery controller
nvme-fabrics: centralize discovery controller defaults
nvme-fabrics: remove unnecessary controller subnqn validation
nvme-fc: remove setting DNR on exception conditions
nvme-rdma: stop admin queue before freeing it
nvme-pci: Fix AER reset handling
nvme-pci: set nvmeq->cq_vector after alloc cq/sq
nvme: host: core: fix precedence of ternary operator
nvme: fix lockdep warning in nvme_mpath_clear_current_path
|
|
DP 1.4 compliance requires 16 bytes to be read when reading link caps,
i.e. it requires DP_ADAPTER_CAP to be included. Included it for all DP
versions because reading more than required won't fail.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Because it looks neater.
For diolan, this allows factoring out some code that is now common
between if and else.
For eg20t, pch_i2c_writebytes is always called with a write in
msgs->flags, and pch_i2c_readbytes with a read.
For imx, i2c_imx_dma_write and i2c_imx_write are always called with a
write in msgs->flags, and i2c_imx_read with a read.
For qup, qup_i2c_write_tx_fifo_v1 is always called with a write in
qup->msg->flags.
For stu300, also restructure debug output for resends, since that
code as a result is only handling debug output.
Reviewed-by: Guenter Roeck <linux@roeck-us.net> [diolan]
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [efm32 and imx]
Acked-by: Linus Walleij <linus.walleij@linaro.org> [stu300]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Prevent interrupt programming of a crtc on which the stream is disabled and
it doesn't have an OTG to reference.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Because it looks neater.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This value depands on the metadata support value, so reorder the
initialization to fit.
Fixes: b5be3b392 ("nvme: always unregister the integrity profile in __nvme_revalidate_disk")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
|
|
This change will fix wb and display scaling when ratios of
4 or more are involved
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When a DRM mode reset is called on resume, the connector state's
destructor is not called. This leaves a dangling reference on the CRTC
commit object, which was obtained by the connector state during commit
setup.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register programming to support TMZ and DCC on
secondary surfaces.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register programming to support 16bpc component
depth for DP.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixing warning on dce10 with HDMI display.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If connector doesn't have a sink, fake sink is created, but
never released as it assumed that its destroyed with the
stream it is used for. But now sink is released before the
stream maintaing refcount consistency.
This way we also avoid assigning anything to connector keeping
all the operation local.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
FBC enabling and disabling path has msleep which leads to
BUG hit when called in atomic context, hence this patch
replaces msleeps with udelays appropriately.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Delete if statement that would force any display's color depth higher
than 8 bpc to 8
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It should be stateless, and no need for scheduler to take care specially.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move logic of getting supported domain to a helper
function
Signed-off-by: Deepak Sharma <Deepak.Sharma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When vram size <= THRESHOLD(256M) lets use GTT for dumb buffer
allocation. As SG will be enabled with vram size <= 256M
scan out will not be an issue.
v2: Use amdgpu_display_supported_domains to get supported domain.
Signed-off-by: Deepak Sharma <Deepak.Sharma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add case options to retrieve either physical or display clocks with
voltage from SMU controller that are needed by display driver.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Also drop wrong 10kHz comment
Fixes: drm/amd/display: Implement dm_pp_get_clock_levels_by_type_with_latency
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The URL is broken. This patch fixes it.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
[wsa: shortened the URL a bit]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
