summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-05-28scsi: target: fix spelling mistake "Uknown" -> "Unknown"Colin Ian King
Trivial fix to spelling mistake in pr_err message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: pm80xx: fix spelling mistake "UNSORPORTED" -> "SUPPORTED"Colin Ian King
Trivial fix to spelling mistake in pm8001_printk message text; also I believe NOT_UNSUPPORTED should probably be NOT_SUPPORTED. Also fix the indent of the pm8001_printk statement. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: core: sanitize++ in progressDouglas Gilbert
Commit 505aa4b6a883 ("scsi: sd: Defer spinning up drive while SANITIZE is in progress") may not be sufficient, especially if the SCSI SANITIZE command is sent via the bsg or sg pass-throughs, since they don't use the sd driver. Add "Sanitize in progress" plus some other recent "... in progress" additional sense codes into the scsi mid-level so they are treated in a similar fashion to "Format in progress". [mkp: checkpatch] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28scsi: scsi_transport_srp: Fix shost to rport translationBart Van Assche
Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-28media: ddbridge: conditionally enable fast TS for stv0910-equipped bridgesDaniel Scheller
CineS2 V7(A) and Octopus CI S2 Pro/Advanced cards support faster TS speeds on the card's contained stv0910 demodulator when their FPGA was updated with a recent (>= 1.7, version number applies to all mentioned cards) vendor firmware. Enable this faster TS speed on card port 0 (contained demod) and parallel stv0910 connections when the card firmware is at least 1.7 or later. Note: The mentioned cards and their demods are handled via the STV0910_PR and STV0910_P tuner types. DuoFlex modules with such demodulators are handled via the STV0910 (without suffix) types where such TS speed increase doesn't technically make sense. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Tested-by: Helmut Auer <post@helmutauer.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: dvb-frontends/stv0910: make TS speed configurableDaniel Scheller
Add a tsspeed config option to struct stv0910_cfg which can be used by users of the driver to set the (parallel) TS speed (higher speeds enable support for higher bitrate transponders). If tsspeed isn't set in the config, it'll default to a sane value. This commit also updates the two consumers of the stv0910 driver (ngene and ddbridge) to have a default tsspeed in their stv0910_cfg templates. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Tested-by: Helmut Auer <post@helmutauer.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: ddbridge/mci: add identifiers to function definition argumentsDaniel Scheller
Fixes two checkpatch warnings WARNING: function definition argument 'xxx' should also have an identifier name in the ddb_mci_attach() prototype definition. checkpatch keeps complaining on the "int (**fn_set_input)" as it seems to have issues with the ptr-to-ptr, though this probably needs fixing in checkpatch. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: ddbridge/mci: protect against out-of-bounds array access in stop()Daniel Scheller
In stop(), an (unlikely) out-of-bounds write error can occur when setting the demod_in_use element indexed by state->demod to zero, as state->demod isn't checked for being in the range of the array size of demod_in_use, and state->demod maybe carrying the magic 0xff (demod unused) value. Prevent this by checking state->demod not exceeding the array size before setting the element value. To make the code a bit easier to read, replace the magic value and the number of array elements with defines, and use them at a few more places. Detected by CoverityScan, CID#1468550 ("Out-of-bounds write") Thanks to Colin for reporting the problem and providing an initial patch. Fixes: daeeb1319e6f ("media: ddbridge: initial support for MCI-based MaxSX8 cards") Reported-by: Colin Ian King <colin.king@canonical.com> Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rc: ensure input/lirc device can be opened after registerSean Young
Since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") rc_open() will return -ENODEV if rcdev->registered is false. Ensure this is set before we register the input device and the lirc device, else we have a short window where the neither the lirc or input device can be opened. Fixes: cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rc: nuvoton: Keep device enabled during reg initMichał Winiarski
Doing writes when the device is disabled seems to be a NOOP. For CIR device, we should enable it, initialize it, and then disable it until it's opened. CIR_WAKE should always be enabled. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rc: nuvoton: Keep track of users on CIR enable/disableMichał Winiarski
Core rc keeps track of the users - let's use it to tweak the code and use the common code path on suspend/resume. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rc: nuvoton: Tweak the interrupt enabling danceMichał Winiarski
It appears that we need to enable CIR device before attempting to touch some of the registers. Previously, this was not a big issue, since we were rarely seeing nvt_close() getting called. Unfortunately, since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") the initial open() during probe from rc_setup_rx_device() is no longer successful, which means that userspace clients will actually end up calling nvt_open()/nvt_close(). Since nvt_open() is broken, the device doesn't seem to work as expected. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199597 Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: uvcvideo: Support realtek's UVC 1.5 deviceming_qian
media: uvcvideo: Support UVC 1.5 video probe & commit controls The length of UVC 1.5 video control is 48, and it is 34 for UVC 1.1. Change it to 48 for UVC 1.5 device, and the UVC 1.5 device can be recognized. More changes to the driver are needed for full UVC 1.5 compatibility. However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have been reported to work well. [laurent.pinchart@ideasonboard.com: Factor out code to helper function, update size checks] Cc: stable@vger.kernel.org Signed-off-by: ming_qian <ming_qian@realsil.com.cn> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Ana Guerrero Lopez <ana.guerrero@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28bcache: Replace bch_read_string_list() by __sysfs_match_string()Andy Shevchenko
Kernel library has a common function to match user input from sysfs against an array of strings. Thus, replace bch_read_string_list() by __sysfs_match_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28bcache: Move couple of functions to sysfs.cAndy Shevchenko
There is couple of functions that are used exclusively in sysfs.c. Move it to there and make them static. Besides above, it will allow further clean up. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28bcache: Move couple of string arrays to sysfs.cAndy Shevchenko
There is couple of string arrays that are used exclusively in sysfs.c. Move it to there and make them static. Besides above, it will allow further clean up. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28bcache: stop bcache device when backing device is offlineColy Li
Currently bcache does not handle backing device failure, if backing device is offline and disconnected from system, its bcache device can still be accessible. If the bcache device is in writeback mode, I/O requests even can success if the requests hit on cache device. That is to say, when and how bcache handles offline backing device is undefined. This patch tries to handle backing device offline in a rather simple way, - Add cached_dev->status_update_thread kernel thread to update backing device status in every 1 second. - Add cached_dev->offline_seconds to record how many seconds the backing device is observed to be offline. If the backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and call bcache_device_stop() to stop the bache device which linked to the offline backing device. Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds, its bcache device will be removed, then user space application writing on it will get error immediately, and handler the device failure in time. This patch is quite simple, does not handle more complicated situations. Once the bcache device is stopped, users need to recovery the backing device, register and attach it manually. Changelog: v3: call wait_for_kthread_stop() before exits kernel thread. v2: remove "bcache: " prefix when calling pr_warn(). v1: initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28media: uvcvideo: Fix driver reference countingPhilipp Zabel
kref_init initializes the reference count to 1, not 0. This additional reference is never released since the conversion to reference counters. As a result, uvc_delete is not called anymore when UVC cameras are disconnected. Fix this by adding an additional kref_put in uvc_disconnect and in the probe error path. This also allows to remove the temporary additional reference in uvc_unregister_video. Fixes: 9d15cd958c17 ("media: uvcvideo: Convert from using an atomic variable to a reference count") Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca_zc3xx: Enable short exposure times for OV7648Ondrej Zary
The 50Hz and 60Hz power line frequency settings disable short (1/120s and 1/100s) exposure times for banding filter (causing overexposed image near lamps). No flicker setting enables them (when banding filter is disabled and they're not used). Seems that the logic is just the wrong way around. (This bug came from the Windows driver.) Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca_zc3xx: Fix power line frequency settings for OV7648Ondrej Zary
Power line frequency settings for OV7648 sensor contain autogain and exposure commands, affecting unrelated controls. Remove them. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca_zc3xx: Implement proper autogain and exposure control for OV7648Ondrej Zary
The ZS0211 internal autogain causes pumping and flickering with OV7648 sensor on 0ac8:307b webcam. Implement OV7648 autogain and exposure control and use that instead. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-core: push taking ioctl mutex down to ioctl handlerHans Verkuil
The ioctl serialization mutex (vdev->lock or q->lock for vb2 queues) was taken at the highest level in v4l2-dev.c. This prevents more fine-grained locking since at that level we cannot examine the ioctl arguments, we can only do that after video_usercopy is called. So push the locking down to __video_do_ioctl() and subdev_do_ioctl_lock(). This also allows us to make a few functions in v4l2-ioctl.c static and video_usercopy() is no longer exported. The locking scheme is not changed by this patch, just pushed down. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: pvrusb2: replace pvr2_v4l2_ioctl by video_ioctl2Hans Verkuil
This driver is the only V4L driver that does not set unlocked_ioctl to video_ioctl2. The only thing that pvr2_v4l2_ioctl does besides calling video_ioctl2 is calling pvr2_hdw_commit_ctl(). Add pvr2_hdw_commit_ctl() calls to the various ioctls that need this, and we can replace pvr2_v4l2_ioctl by video_ioctl2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: au8522: remove duplicate codeGustavo A. R. Silva
This code has been there for nine years now, and it has been working "good enough" since then [1]. Remove duplicate code by getting rid of the if-else statement. [1] https://marc.info/?l=linux-kernel&m=152693550225081&w=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: adv7511: fix incorrect clear of CEC receive interruptHans Verkuil
If a CEC message was received and the RX interrupt was set, but not yet processed, and a new transmit was issues, then the transmit code would inadvertently clear the RX interrupt and after that no new messages would ever be received. Instead it should only clear TX interrupts since register 0x97 is a clear-on-write register. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: cec: fix wrong tx/rx_status values when canceling a msgHans Verkuil
When a message was canceled it could return tx_status with both OK and MAX_RETRIES set, which is illegal. If a canceled message was waiting for a reply, then rx_status wasn't updated, so set that as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: hdpvr: fix spelling mistake: "Hauppage" -> "Hauppauge"Colin Ian King
Trivial fix to spelling mistake in name field Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: pxa_camera: avoid duplicate s_power callsAkinobu Mita
The open() operation for the pxa_camera driver always calls s_power() operation to put its subdevice sensor in normal operation mode, and the release() operation always call s_power() operation to put the subdevice in power saving mode. This requires the subdevice sensor driver to keep track of its power state in order to avoid putting the subdevice in power saving mode while the device is still opened by some users. Many subdevice drivers handle it by the boilerplate code that increments and decrements an internal counter in s_power() like below: /* * If the power count is modified from 0 to != 0 or from != 0 to 0, * update the power state. */ if (sensor->power_count == !on) { ret = ov5640_set_power(sensor, !!on); if (ret) goto out; } /* Update the power count. */ sensor->power_count += on ? 1 : -1; However, some subdevice drivers don't handle it and may cause a problem with the pxa_camera driver if the video device is opened by more than two users at the same time. Instead of propagating the boilerplate code for each subdevice driver that implement s_power, this introduces an trick that many V4L2 drivers are using with v4l2_fh_is_singular_file(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: staging: tegra-vde: Reset memory clientDmitry Osipenko
DMA requests must be blocked before resetting VDE HW, otherwise it is possible to get a memory corruption or a machine hang. Use the reset control provided by the Memory Controller to block DMA before resetting the VDE HW. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: tw686x: Fix incorrect vb2_mem_ops GFP flagsEzequiel Garcia
When the driver is configured in the "memcpy" dma-mode, it uses vb2_vmalloc_memops, which is backed by a SLAB allocator and so shouldn't be using GFP_DMA32. Fix it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: m2m-deinterlace: Remove DMA_ENGINE dependencyEzequiel Garcia
The DMA engine subsystem provides stubs for drivers to build with !DMA_ENGINE. Drop the config dependency. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: stk1160: Add missing calls to mutex_destroyEzequiel Garcia
The mutexes are not being destroyed in the release path. Fix it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: stk1160: Fix typo s/therwise/OtherwiseEzequiel Garcia
Fix a trivial typo. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various VIDEOBUF*DMA* symbols had to loose their dependencies on HAS_DMA, as they are selected by several individual drivers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: vivid: potential integer overflow in vidioc_g_edid()Dan Carpenter
If we pick a very large "edid->blocks" value then the "edid->start_block + edid->blocks" addition could wrap around. Fixes: ef834f7836ec ("[media] vivid: add the video capture and output parts") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: cec-pin-error-inj: avoid a false-positive Spectre detectionMauro Carvalho Chehab
The current logic makes Smatch to false-detect a Spectre variant 1 vulnerability. The problem is that it initializes an u32 indirectly from user space input. After trying to write a fixup, after a while I realized that, in practice, this shouldn't be a problem, as an u32 is initialized from u8, but it took some time to discover it. So, do some code cleanup to make it clearer for both humans and machines about the valid range for "op". Fix this warning: drivers/media/cec/cec-pin-error-inj.c:170 cec_pin_error_inj_parse_line() warn: potential spectre issue 'pin->error_inj_args' Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca: Kill all URBs before releasing any of themEzequiel Garcia
Some subdrivers access the gspca_dev->urb array in the completion handler. To prevent use-after-free (actually, NULL dereferences) we need to synchronously kill all the URBs before we release them. In particular, this is currently the case for drivers such as sn9c20x and sonixj, which access the gspca_dev->urb[0] in the context of completion handler for *any* of the URBs. This commit changes the destroy_urb implementation, so it kills all URBs first, and then proceed to set the URBs to NULL in the array and release them. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca: fix g/s_parm handlingHans Verkuil
Fix v4l2-compliance error: s_parm never set V4L2_CAP_TIMEPERFRAME. Also various g/s_parm-related cleanups. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-ioctl: delete unused v4l2_disable_ioctl_lockingHans Verkuil
The last user of this 'feature' was the gspca driver. Now that that driver has been converted to vb2 we can delete this code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-ioctl: clear fields in s_parmHans Verkuil
Zero the reserved capture/output array. Zero the extendedmode (it is never used in drivers). Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY, as that is the only valid flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: gspca: convert to vb2Hans Verkuil
The gspca core has its own buffere implementation. Use the core VB 2 instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: videobuf2-core: don't call memop 'finish' when queueingHans Verkuil
When a buffer is queued or requeued in vb2_buffer_done, then don't call the finish memop. In this case the buffer is only returned to vb2, not to userspace. Calling 'finish' here will cause an unbalance when the queue is canceled, since the core will call the same memop again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: ov772x: correct setting of banding filterAkinobu Mita
The banding filter ON/OFF is controlled via bit 5 of COM8 register. It is attempted to be enabled in ov772x_set_params() by the following line. ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1); But this unexpectedly results disabling the banding filter, because the mask and set bits are exclusive. On the other hand, ov772x_s_ctrl() correctly sets the bit by: ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF); Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: imx258: get rid of an unused varMauro Carvalho Chehab
drivers/media/i2c/imx258.c: In function 'imx258_init_controls': drivers/media/i2c/imx258.c:1117:6: warning: variable 'exposure_max' set but not used [-Wunused-but-set-variable] s64 exposure_max; ^~~~~~~~~~~~ Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: imx258: Add imx258 camera sensor driverJason Chen
Add a V4L2 sub-device driver for the Sony IMX258 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. Signed-off-by: Jason Chen <jasonx.z.chen@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rcar-csi2: set default format if a unsupported one is requestedNiklas Söderlund
Instead of failing the set_fmt() if a unsupported format is requested set a default one and return the changed format to the user. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driverNiklas Söderlund
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver supports the R-Car Gen3 SoCs where separate CSI-2 hardware blocks are connected between the video sources and the video grabbers (VIN). Driver is based on a prototype by Koji Matsuoka in the Renesas BSP. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28Merge branch 'mr_fix' into ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next Update mlx4 to support user MR creation against read-only memory, previously it required the memory to be writable. Based on rdma for-rc due to dependencies. * mr_fix: (2 commits) IB/mlx4: Mark user MR as writable if actual virtual memory is writable IB/core: Make testing MR flags for writability a static inline function
2018-05-28IB/mlx4: Mark user MR as writable if actual virtual memory is writableJack Morgenstein
To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-05-28IB/core: Make testing MR flags for writability a static inline functionJack Morgenstein
Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>