summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-05-21usb: dwc3: gadget: reduce scope of ret variableFelipe Balbi
We can declare it inside list_for_each_entry_safe() loop and reduce its scope. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: one declaration per lineFelipe Balbi
Misc cleanup. No functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: simplify IOC handlingFelipe Balbi
We will only have event status of IOC when IOC bit is set in TRB. There's no need to check both bits. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: simplify short packet eventFelipe Balbi
We know that only OUT endpoints can trigger SHORT. We also know that count MUST be > 0 whenever SHORT triggers. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: trace: print out event status tooFelipe Balbi
This will make it easier to figure out the reason for the event. That information really helps debugging certain problems. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: simplify unaligned and zlp handlingFelipe Balbi
We can just call reclaim_trb_linear instead of reimplementing it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove unnecessary 'chain' variableFelipe Balbi
Minor cleanup, no functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove PENDING handling from cleanup_completedFelipe Balbi
We are trying to kick transfers on Isochronous endpoints in a more controlled manner now. And this ended up rendering this piece of code unnecessary. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: split scatterlist and linear handlersFelipe Balbi
instead of having one big loop, let's split it down into two smaller handlers: one for linear buffers and one for scatterlist. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: simplify isoc case on cleanup_completed_requestsFelipe Balbi
Just a minor simplification, no functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: simplify queueing of isoc transfersFelipe Balbi
After all the previous changes, it's now a lot clearer how isoc transfers should be managed. We don't need to try to End Transfers from ep_queue since that's already done by cleanup_requests. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove duplicated missed isoc handlingFelipe Balbi
Now, this part of the code is duplicated and brings no extra value to the driver. Let's remove it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: check for Missed Isoc from event statusFelipe Balbi
In case we get an event with status set to Missed Isoc, this means we have missed an isochronous interval and should issue End Transfer command and wait for the following XferNotReady. Let's do that early, rather than late. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove unnecessary 'ioc' variableFelipe Balbi
It's only written to, never read. We can remove it now. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: make cleanup_completed_requests() return nothingFelipe Balbi
We don't need to return a value anymore here. Let's remove it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove DWC3_EP_BUSY flagFelipe Balbi
It has no use anymore. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: start removing BUSY flagFelipe Balbi
By now, it has the same semantics as DWC3_EP_TRANSFER_STARTED, but that has a much more descriptive name. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: update dep->frame_number from XferInprogress tooFelipe Balbi
We will need an up-to-date frame_number from XferInProgress too when future patches improve our handling of Isoc endpoints. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: always use frame number from XferNotReadyFelipe Balbi
The core requires the extra two bits of information for properly scheduling Isochronous transfers. This means that we can't rely on __dwc3_gadget_get_frame(). Let's always cache uFrame number from XferNotReady instead. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove unnecessary 'dwc' parameterFelipe Balbi
Endpoint handlers need to know about endpoints, not dwc. If they really need access to dwc (e.g. for printing error messages) we have a reference to it tucked inside the endpoint. This patch has no functional changes, it's simply moving things around. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: move handler closer to calling siteFelipe Balbi
Cleanup only, no functional changes. Just making code easier to follow. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: rename dwc3_gadget_start_isoc()Felipe Balbi
Cleanup only, no functional changes. This just matches the event name with its handler. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove some pointless checksFelipe Balbi
We *KNOW* which events we enable for which endpoint types and we *KNOW* when they'll trigger. The endpoint type checks are pointless. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: remove allocated/queued request trackingFelipe Balbi
That has never proven useful in any way. Just remove it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: rename done_trbs and done_reqsFelipe Balbi
This patch simply renames two functions to more descriptive names so that it's easier to understand what they're doing. Cleanup only, no functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: don't kick transfer all the timeFelipe Balbi
Instead of constantly calling kick transfer everything some event shows up, let's just rely on the fact that we send Update Transfer every time a new request is queued. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: rename dwc3_endpoint_transfer_complete()Felipe Balbi
Now that we're making sure we don't have XferComplete events, we can rename this function to what it actually handles: dwc3_gadget_endpoint_transfer_in_progress() Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: XferComplete only for EP0Felipe Balbi
XferComplete is enabled only for the default control pipe, let's make that clear in the code. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: XferNotReady is Isoc-onlyFelipe Balbi
We don't use XferNotReady for anything other than Default Control Pipe, which is handled in ep0.c, and Isochronous endpoints. Let's make that clear in the code. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: pre-issue Start Transfer for Interrupt EPs tooFelipe Balbi
Interrupt endpoints behave much like Bulk endpoints with the exception that they are periodic. We can pre-issue Start Transfer exactly as we do for Bulk endpoints. While at that, remove one trailing blank line which is unnecessary. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: Correct the logic for queuing sgsAnurag Kumar Vulisha
The present code correctly fetches the req which were previously not queued from the started_list but fails to continue queuing from the sg where it previously stopped queuing (because of the unavailable TRB's). This patch correct's the code to continue queuing from the correct sg present in the sglist. For example, consider 5 sgs in req. Because of limited TRB's among the 5 sgs only 3 got queued. This patch corrects the code to start queuing from correct sg i.e 4th sg when the TRBs are available. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc3: gadget: Correct handling of scattergather listsAnurag Kumar Vulisha
The code logic in dwc3_prepare_one_trb() incorrectly uses the address and length fields present in req packet for mapping TRB's instead of using the address and length fields of scattergather lists. This patch correct's the code to use sg->address and sg->length when scattergather lists are present. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21Merge 4.17-rc6 into usb-nextGreg Kroah-Hartman
We want the bug fixes and this resolves the merge issues with the usbip driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-21hwmon: (ibmpowernv) Add energy sensorsShilpasri G Bhat
This patch exports the accumulated power numbers of each power sensor maintained by OCC. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-21hwmon: (ibmpowernv): Add support to read 64 bit sensorsShilpasri G Bhat
The firmware has supported for reading sensor values of size u32. This patch adds support to use newer firmware functions which allows to read the sensors of size u64. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-20mv88e6xxx: Fix uninitialized variable warning.David S. Miller
In mv88e6xxx_probe(), ("np" or "pdata") might be an invariant but GCC can't see that, therefore: drivers/net/dsa/mv88e6xxx/chip.c: In function ‘mv88e6xxx_probe’: drivers/net/dsa/mv88e6xxx/chip.c:4420:13: warning: ‘compat_info’ may be used uninitialized in this function [-Wmaybe-uninitialized] chip->info = compat_info; Actually, it should have warned on the "if (!compat_info)" test, but whatever. Explicitly initialize to NULL in the variable declaration to deal with this. Fixes: 877b7cb0b6f2 ("net: dsa: mv88e6xxx: Add minimal platform_data support") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: dsa: mv88e6xxx: Add support for EEPROM via platform dataAndrew Lunn
Add the size of the EEPROM to the platform data, so it can also be instantiated by a platform device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: dsa: mv88e6xxx: Add minimal platform_data supportAndrew Lunn
Not all the world uses device tree. Some parts of the world still use platform devices and platform data. Add basic support for probing a Marvell switch via platform data. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: dsa: mv88e6xxx: Remove OF check for IRQ domainAndrew Lunn
An IRQ domain will work without an OF node. It is not possible to reference interrupts via a phandle, but C code can still use irq_find_mapping() to get an interrupt from the domain. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix typo in comment to BCULR writeSergei Shtylyov
Simon has noticed a typo in the comment accompaining the BCULR write -- fix it and move the comment before the write (following the style of the other comments), while at it... Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix comment grammar in 'struct sh_eth_cpu_data'Sergei Shtylyov
All the verbs in the comments to the 'struct sh_eth_cpu_data' declaration should be in a 3rd person singular, to match the nouns. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20sh_eth: fix typo in EESR.TRO bit nameSergei Shtylyov
The correct name of the EESR bit 8 is TRO (transmit retry over), not RTO. Note that EESIPR bit 8, TROIP remained correct... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for CMDQ and Misc. interrupt init order problemYunsheng Lin
When vf module is loading, the cmd queue initialization should happen before misc interrupt initialization, otherwise the misc interrupt handle will cause using uninitialized cmd queue problem. There is also the same issue when vf module is unloading. This patch fixes it by adjusting the location of some function. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fixes kernel panic issue during rmmod hns3 driverXi Wang
If CONFIG_ARM_SMMU_V3 is enabled, arm64's dma_ops will replace arm64_swiotlb_dma_ops with iommu_dma_ops. When releasing contiguous dma memory, the new ops will call the vunmap function which cannot be run in interrupt context. Currently, spin_lock_bh is called before vunmap is executed. This disables BH and causes the interrupt context to be detected to generate a kernel panic like below: [ 2831.573400] kernel BUG at mm/vmalloc.c:1621! [ 2831.577659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ... [ 2831.699907] Process rmmod (pid: 1893, stack limit = 0x0000000055103ee2) [ 2831.706507] Call trace: [ 2831.708941] vunmap+0x48/0x50 [ 2831.711897] dma_common_free_remap+0x78/0x88 [ 2831.716155] __iommu_free_attrs+0xa8/0x1c0 [ 2831.720255] hclge_free_cmd_desc+0xc8/0x118 [hclge] [ 2831.725128] hclge_destroy_cmd_queue+0x34/0x68 [hclge] [ 2831.730261] hclge_uninit_ae_dev+0x90/0x100 [hclge] [ 2831.735127] hnae3_unregister_ae_dev+0xb0/0x868 [hnae3] [ 2831.740345] hns3_remove+0x3c/0x90 [hns3] [ 2831.744344] pci_device_remove+0x48/0x108 [ 2831.748342] device_release_driver_internal+0x164/0x200 [ 2831.753553] driver_detach+0x4c/0x88 [ 2831.757116] bus_remove_driver+0x60/0xc0 [ 2831.761026] driver_unregister+0x34/0x60 [ 2831.764935] pci_unregister_driver+0x30/0xb0 [ 2831.769197] hns3_exit_module+0x10/0x978 [hns3] [ 2831.773715] SyS_delete_module+0x1f8/0x248 [ 2831.777799] el0_svc_naked+0x30/0x34 This patch fixes it by using spin_lock instead of spin_lock_bh. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for netdev not running problem after calling net_stop and ↵Fuyun Liang
net_open The link status update function is called by timer every second. But net_stop and net_open may be called with very short intervals. The link status update function can not detect the link state has changed. It causes the netdev not running problem. This patch fixes it by updating the link state in ae_stop function. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Use enums instead of magic number in hclge_is_special_opcodeHuazhong Tan
This patch does bit of a clean-up by using already defined enums for certain values in function hclge_is_special_opcode(). Below enums from have been used as replacements for magic values: enum hclge_opcode_type{ <snip> HCLGE_OPC_STATS_64_BIT = 0x0030, HCLGE_OPC_STATS_32_BIT = 0x0031, HCLGE_OPC_STATS_MAC = 0x0032, <snip> }; Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix for hns3 module is loaded multiple times problemXi Wang
If the hns3 driver has been built into kernel and then loaded with the same driver which built as KLM, it may trigger an error like below: [ 20.009555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 20.016789] hns3: Copyright (c) 2017 Huawei Corporation. [ 20.022100] Error: Driver 'hns3' is already registered, aborting... [ 23.517397] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 23.691583] Process insmod (pid: 1982, stack limit = 0x00000000cd5f21cb) [ 23.698270] Call trace: [ 23.700705] __list_del_entry_valid+0x2c/0xd8 [ 23.705049] hnae3_unregister_client+0x68/0xa8 [ 23.709487] hns3_init_module+0x98/0x1000 [hns3] [ 23.714093] do_one_initcall+0x5c/0x170 [ 23.717918] do_init_module+0x64/0x1f4 [ 23.721654] load_module+0x1d14/0x24b0 [ 23.725390] SyS_init_module+0x158/0x208 [ 23.729300] el0_svc_naked+0x30/0x34 This patch fixes it by adding module version info. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fix the missing client list node initializationXi Wang
This patch fixes the missing initialization of the client list node in the hnae3_register_client() function. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: cleanup of return values in hclge_init_client_instance()Jian Shen
Removes the goto and directly returns in case of errors as part of the cleanup. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-20net: hns3: Fixes API to fetch ethernet header length with kernel defaultPeng Li
During the RX leg driver needs to fetch the ethernet header length from the RX'ed Buffer Descriptor. Currently, proprietary version hns3_nic_get_headlen is being used to fetch the header length which uses l234info present in the Buffer Descriptor which might not be valid for the first Buffer Descriptor if the packet is spanning across multiple descriptors. Kernel default eth_get_headlen API does the job correctly. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-27 06:03:38 +0000