| Age | Commit message (Collapse) | Author |
|---|
|
Add this board to the list to allow e.g. efivars access.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_soc-v1-4-55347831d73c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
X1P42100 is a cousin of X1E80100, and hence can make use of the
latter's configuration. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_soc-v1-3-55347831d73c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Running i2c-detect currently produces an output akin to:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- 0a -- 0c -- 0e --
10: 10 -- 12 -- 14 -- 16 -- UU 19 -- 1b -- 1d -- 1f
20: -- 21 -- 23 -- 25 -- 27 -- 29 -- 2b -- 2d -- 2f
30: -- -- -- -- -- -- -- -- 38 -- 3a -- 3c -- 3e --
40: 40 -- 42 -- 44 -- 46 -- 48 -- 4a -- 4c -- 4e --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: 60 -- 62 -- 64 -- 66 -- 68 -- 6a -- 6c -- 6e --
70: 70 -- 72 -- 74 -- 76 --
This happens because for an i2c_msg with a len of 0 the driver will
mark the transmission of the message as a success once the START has
been sent, without waiting for the devices on the bus to respond with an
ACK/NAK. Since i2cdetect seems to run in a tight loop over all addresses
the NAK is treated as part of the next test for the next address.
Delete the fast path that marks a message as complete when idev->msg_len
is zero after sending a START/RESTART since this isn't a valid scenario.
CC: stable@vger.kernel.org
Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-outbid-encounter-b2e78b1cc707@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
At present, where repeated sends are intended to be used, the
i2c-microchip-core driver sends a stop followed by a start. Lots of i2c
devices must not malfunction in the face of this behaviour, because the
driver has operated like this for years! Try to keep track of whether or
not a repeated send is required, and suppress sending a stop in these
cases.
CC: stable@vger.kernel.org
Fixes: 64a6f1c4987e ("i2c: add support for microchip fpga i2c controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20241218-football-composure-e56df2461461@spud
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
compatible string table, at the result, "fsl,imx21-i2c" will be
matched, but it will cause erratum ERR007805 not be applied in fact.
So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf).
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
"fsl,imx7d-i2c" already is documented in binding doc. This erratum
fix has been included in imx6_i2c_hwdata and it is the same in all
I.MX6/7/8, so just reuse it.
Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20241218044238.143414-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
A regression was introduced with the implementation of single-master
mode, preventing proper stop conditions from being generated. Devices
that require a valid stop condition, such as EEPROMs, fail to function
correctly as a result.
The issue only affects devices with the single-master property enabled.
This commit resolves the issue by re-enabling I2C bus busy bit (IBB)
polling for single-master mode when generating a stop condition. The fix
further ensures that the i2c_imx->stopped flag is cleared at the start
of each transfer, allowing the stop condition to be correctly generated
in i2c_imx_stop().
According to the reference manual (IMX8MMRM, Rev. 2, 09/2019, page
5270), polling the IBB bit to determine if the bus is free is only
necessary in multi-master mode. Consequently, the IBB bit is not polled
for the start condition in single-master mode.
Fixes: 6692694aca86 ("i2c: imx: do not poll for bus busy in single master mode")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20241216151829.74056-1-eichest@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The PHY portion of the mediatek hdmi driver was originally part of
the driver it self and later split out into drivers/phy, which a
'select' to keep the prior behavior.
However, this leads to build failures when the PHY driver cannot
be built:
WARNING: unmet direct dependencies detected for PHY_MTK_HDMI
Depends on [n]: (ARCH_MEDIATEK || COMPILE_TEST [=y]) && COMMON_CLK [=y] && OF [=y] && REGULATOR [=n]
Selected by [m]:
- DRM_MEDIATEK_HDMI [=m] && HAS_IOMEM [=y] && DRM [=m] && DRM_MEDIATEK [=m]
ERROR: modpost: "devm_regulator_register" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
ERROR: modpost: "rdev_get_drvdata" [drivers/phy/mediatek/phy-mtk-hdmi-drv.ko] undefined!
The best option here is to just not select the phy driver and leave that
up to the defconfig. Do the same for the other PHY and memory drivers
selected here as well for consistency.
Fixes: a481bf2f0ca4 ("drm/mediatek: Separate mtk_hdmi_phy to an independent module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241218085837.2670434-1-arnd@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mediatek-drm driver reported the capability of 180-degree rotation by
adding `DRM_MODE_ROTATE_180` to the plane property, as flip-x combined
with flip-y equals a 180-degree rotation. However, we did not handle
the rotation property in the driver and lead to rotation issues.
Fixes: 74608d8feefd ("drm/mediatek: Add DRM_MODE_ROTATE_0 to rotation property")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241118025126.30808-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Touching DISP_REG_OVL_PITCH_MSB leads to video overlay on MT2701, MT7623N
and probably other older SoCs being broken.
Move setting up AFBC layer configuration into a separate function only
being called on hardware which actually supports AFBC which restores the
behavior as it was before commit c410fa9b07c3 ("drm/mediatek: Add AFBC
support to Mediatek DRM driver") on non-AFBC hardware.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/c7fbd3c3e633c0b7dd6d1cd78ccbdded31e1ca0f.1734397800.git.daniel@makrotopia.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
mtk_crtc_finish_page_flip() is used to notify userspace that a
page flip has been completed, allowing userspace to free the frame
buffer of the last frame and commit the next frame.
In MediaTek's hardware design for configuring display hardware by using
GCE, `DRM_EVENT_FLIP_COMPLETE` should be notified to userspace after
GCE has finished configuring all display hardware settings for each
atomic_commit().
Currently, mtk_crtc_finish_page_flip() cannot guarantee that GCE has
configured all the display hardware settings of the last frame.
Therefore, to increase the accuracy of the timing for notifying
`DRM_EVENT_FLIP_COMPLETE` to userspace, mtk_crtc_finish_page_flip()
should be moved to ddp_cmdq_cb().
Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241211034716.29241-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
returns err
The pointer need to be set to NULL, otherwise KASAN complains about
use-after-free. Because in mtk_drm_bind, all private's drm are set
as follows.
private->all_drm_private[i]->drm = drm;
And drm will be released by drm_dev_put in case mtk_drm_kms_init returns
failure. However, the shutdown path still accesses the previous allocated
memory in drm_atomic_helper_shutdown.
[ 84.874820] watchdog: watchdog0: watchdog did not stop!
[ 86.512054] ==================================================================
[ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378
[ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1
[ 86.515213]
[ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55
[ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022
[ 86.517960] Call trace:
[ 86.518333] show_stack+0x20/0x38 (C)
[ 86.518891] dump_stack_lvl+0x90/0xd0
[ 86.519443] print_report+0xf8/0x5b0
[ 86.519985] kasan_report+0xb4/0x100
[ 86.520526] __asan_report_load8_noabort+0x20/0x30
[ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378
[ 86.521966] mtk_drm_shutdown+0x54/0x80
[ 86.522546] platform_shutdown+0x64/0x90
[ 86.523137] device_shutdown+0x260/0x5b8
[ 86.523728] kernel_restart+0x78/0xf0
[ 86.524282] __do_sys_reboot+0x258/0x2f0
[ 86.524871] __arm64_sys_reboot+0x90/0xd8
[ 86.525473] invoke_syscall+0x74/0x268
[ 86.526041] el0_svc_common.constprop.0+0xb0/0x240
[ 86.526751] do_el0_svc+0x4c/0x70
[ 86.527251] el0_svc+0x4c/0xc0
[ 86.527719] el0t_64_sync_handler+0x144/0x168
[ 86.528367] el0t_64_sync+0x198/0x1a0
[ 86.528920]
[ 86.529157] The buggy address belongs to the physical page:
[ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc
[ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff)
[ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000
[ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000
[ 86.534511] page dumped because: kasan: bad access detected
[ 86.535323]
[ 86.535559] Memory state around the buggy address:
[ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.544733] ^
[ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.563928] ==================================================================
[ 86.571093] Disabling lock debugging due to kernel taint
[ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b
[ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f]
...
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241223023227.1258112-1-guoqing.jiang@canonical.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When using type-c to type-c to connect to the monitor,
the sound plays normally. If you unplug the type-c and
connect the type-c to hdmi dongle to the monitor, there will be noise.
By capturing the audio data, it is found that
the data position is messy, and there is no error in the data.
Through experiments, it can be restored by resetting the SDP path
when unplugging it.
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241128023733.16294-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In addition to dispatching event, some private stuffs need to be
done in this driver's link status event handler. Implement the new
report_port_event() ops with the link status event codes.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In addition to dispatching event, some private stuffs need to be
done in this driver's link status event handler. Implement the new
report_port_event() ops with the link status event codes.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
In addition, remove sdev->state as it is only used in siw_query_port(),
and it can be replaced by ib_get_curr_port_state().
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
In addition, remove the setting of port->attr.state in rxe_port_up()
and rxe_port_down(), as it is only used in rxe_query_port(), and it
can be replaced by ib_get_curr_port_state().
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
In addition, remove dev->state as it is only used in erdma_query_port(),
and it can be replaced by ib_get_curr_port_state().
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Since the netdev events of link status is now handled in ib_core,
remove the related code in drivers.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The product names for the Framework Laptop (12th and 13th Generation
Intel Core) are incorrect as of 62be134abf42.
Fixes: 62be134abf42 ("platform/chrome: cros_ec_lpc: switch primary DMI data for Framework Laptop")
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241224-platform-chrome-cros_ec_lpc-fix-product-identity-for-early-framework-laptops-v1-1-0d31d6e1d22c@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Add support for allocating the concurrent writeback mux as part of the
WB allocation
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629238/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-14-fe220297a7f0@quicinc.com
|
|
Adjust the WB_MUX configuration to account for using dedicated CWB
pingpong blocks.
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629248/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-13-fe220297a7f0@quicinc.com
|
|
The CWB mux has its own registers and set of operations. Add dpu_hw_cwb
abstraction to allow driver to configure the CWB mux.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629254/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-12-fe220297a7f0@quicinc.com
[DB: added #include <linux/bitfield.h>]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Implement instance of snapshot function to dump new registers used
for cwb
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629221/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-11-fe220297a7f0@quicinc.com
|
|
Change pingpong index and names to distinguish between general use
pingpong blocks and pingpong blocks dedicated for concurrent writeback
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629229/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-10-fe220297a7f0@quicinc.com
|
|
Add a new block for concurrent writeback mux to the SM8650 HW catalog
Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629219/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-9-fe220297a7f0@quicinc.com
|
|
The struct dpu_rm_requirements was used to wrap display topology and
hw resources, which meant INTF indices. As of commit ef58e0ad3436
("drm/msm/dpu: get INTF blocks directly rather than through RM") the hw
resources struct was removed, leaving struct dpu_rm_requirements
containing a single field (topology). Remove the useless wrapper.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
[DB: dropped stray msm_drv.h inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/629259/
Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-5-fe220297a7f0@quicinc.com
|
|
Correct c&p error from the conversion of LCDC regulators to the bulk
API.
Fixes: 54f1fbcb47d4 ("drm/msm/mdp4: use bulk regulators API for LCDC encoder")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/590412/
Link: https://lore.kernel.org/r/20240420-mdp4-fixes-v1-3-96a70f64fa85@linaro.org
|
|
MSM display drivers provide kms structure allocated during probe().
Don't clean up priv->kms field in case of an error. Otherwise probe
functions might fail after KMS probe deferral.
Fixes: a2ab5d5bb6b1 ("drm/msm: allow passing struct msm_kms to msm_drv_probe()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c")
Patchwork: https://patchwork.freedesktop.org/patch/590411/
Link: https://lore.kernel.org/r/20240420-mdp4-fixes-v1-1-96a70f64fa85@linaro.org
|
|
Because the of_dma_configure() will returns '-EPROBE_DEFER' if the probe
procedure of the specific platform IOMMU driver is not finished yet. It
can also return other error code for various reasons.
Stop pretending that it will always suceess, quit if it fail.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 29ac8979cdf7 ("drm/msm/a6xx: use msm_gem for GMU memory objects")
Fixes: 5a903a44a984 ("drm/msm/a6xx: Introduce GMU wrapper support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/622782/
Link: https://lore.kernel.org/r/20241104090738.529848-1-sui.jingfeng@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Passing a variable string as a printf style format is potentially
dangerous that -Wformat-security can warn about if enabled. A new
instance just got added:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function 'dpu_kms_mdp_snapshot':
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1046:49: error: format not a string literal and no format arguments [-Werror=format-security]
1046 | vbif->name);
| ~~~~^~~~~~
Fix this one and the preexisting -Wformat-security warnings the in the
DRM code for snapdragon.
Fixes: 1a40bb31fcf1 ("drm/msm/dpu: Add VBIF to DPU snapshot") # and others
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/629126/
Link: https://lore.kernel.org/r/20241216083319.1838449-1-arnd@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Four minor fixes for NAND controller drivers (cleanup path, double
actions, and W=1 warning) as well as a cast to avoid overflows in an
mtd device driver"
* tag 'mtd/fixes-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: omap2: Fix build warnings with W=1
mtd: rawnand: arasan: Fix missing de-registration of NAND
mtd: rawnand: arasan: Fix double assertion of chip-select
mtd: diskonchip: Cast an operand to prevent potential overflow
mtd: rawnand: fix double free in atmel_pmecc_create_user()
|
|
Topic branch with preparation changes from Qcom in order to apply on top
the spi bits adding the Qcom SPI-NAND controller driver re-using a lot
of code that has been shared.
With this goal in mind, the raw NAND controller driver has been cleaned
up and reorganized, and only the relevant structures/helpers which have
nothing raw NAND specific should now be exported.
|
|
Use the bitfield macro FIELD_PREP, and GENMASK to
do the shift and mask in one go. This makes the code
more readable.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add qpic_common.c file which hold all the common
qpic APIs which will be used by both qpic raw nand
driver and qpic spi nand driver.
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add qcom prefix to all the api which will be commonly
used by spi nand driver and raw nand driver.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Perform a global cleanup of the Qualcomm NAND
controller driver with the following improvements:
- Remove register value indirection API
- Remove set_reg() API
- Convert read_loc_first & read_loc_last macro to functions
- Rename multiple variables
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver no longer builds when regulator support is unavailable:
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi.o: in function `mtk_hdmi_phy_register_regulators':
phy-mtk-hdmi.c:(.text.unlikely+0x3e): undefined reference to `devm_regulator_register'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_is_enabled':
phy-mtk-hdmi-mt8195.c:(.text+0x326): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_disable':
phy-mtk-hdmi-mt8195.c:(.text+0x346): undefined reference to `rdev_get_drvdata'
arm-linux-gnueabi-ld: drivers/phy/mediatek/phy-mtk-hdmi-mt8195.o: in function `mtk_hdmi_phy_pwr5v_enable':
Fixes: 49393b2da1cd ("phy: mediatek: phy-mtk-hdmi: Register PHY provided regulator")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241213083056.2596499-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Kernel test robot returns the following warning:
do_div() does a 64-by-32 division, please consider using div64_ul instead.
To prevent the 64-by-32 divsion, consolidate both the multiplication
and the do_div into one line which explicitly uses u64 sizes.
Fixes: 1951dbb41d1d ("phy: freescale: fsl-samsung-hdmi: Support dynamic integer")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412091243.fSObwwPi-lkp@intel.com/
Link: https://lore.kernel.org/r/20241215220555.99113-1-aford173@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The setup_interface() operation isn't implemented. It forces the driver
to use the ONFI mode 0, though it could use more optimal modes.
Implement the setup_interface() operation. It uses the
aemif_set_cs_timings() function from the AEMIF driver to update the
chip select timings. The calculation of the register's contents is
directly extracted from §20.3.2.3 of the DaVinci TRM [1]
MAX_TH_PS and MAX_TSU_PS are the worst case timings based on the
Keystone2 and DaVinci datasheets.
[1] : https://www.ti.com/lit/ug/spruh77c/spruh77c.pdf
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
NAND controller has a reference clock inherited from the AEMIF
(cf. Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt)
This clock isn't used yet by the driver.
Add a struct clock in the struct davinci_nand_info so it can be used
to compute timings.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
DAVINCI_NAND depends on TI_AEMIF only when ARCH_KEYSTONE is selected
while the NAND controller is also always a part of the AEMIF controller
on DaVinci SoCs.
Set a dependency on TI_AEMIF regardless of the selected architecture.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411020140.3wsKJOSB-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411020957.X1T8T9ZR-lkp@intel.com/
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into nand/next
Memory controller drivers for v6.14 - TI
TI AEMIF driver enhancements: some refactoring around timing
parameters and finally adding plus exporting interfaces for devices
using the AEMIF interface (e.g. TI Davinci NAND controller) to better
configure the memory interface.
The exported functions are going to be used by:
drivers/mtd/nand/raw/davinci_nand.c
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmddXowQHGtyemtAa2Vy
# bmVsLm9yZwAKCRDBN2bmhouD15LAD/9E/LtoM//W6VHRIItF0AmYH7e2E4D2ECwl
# MQyLCsj4zieIg5TLlnZMC/P2P1BIZoerCPN4QC+M/r5NZrMfufZYNdlpY0sqpkd2
# CoW2w8TjN+PHpzOGncHvbxdD5h/SHS0cRoOqiTJmZXeVf4FCq7riv8piGyoontNC
# puzsSjjCOk/AHMHsHBVB3/VbWelvQbjq/qKyW/+aWl8tw3W+Ck4qiPcUMWXkLHhx
# FfsrsUXWqOP7di2zcwWx4N+rNJWuYaM6xv6FoTlkVAhc094vDE/uKvBbQcizX/fd
# 1iMgUsvt6BpLGKbJ8G3ZBL/DY+ugJv5oC7Cql0AWi9/NjW/Yil9C2a0RqKl48TCW
# a4EeJrrXnocK5l0PDodQbyNL+D9c7tiwzs10/VEg2MnchaN8ZvdP/YfLICkJiXcF
# ZAio89mG6r/S/AAe05M1vKso1Le/D0Lhx5IiJ9MDnHvJ5Hw2JPnGs7Dcqq5Xm47K
# toY0kJmUfPZyAyavax7z1nGAAglpsXGN1m52AEoCcwMyU0DTamSUTf+a7pjKph78
# jrv1g2MB06kjGhXVT//8fS07C5b0v/Rn5CB2LgakgGsug1g6+YD0/rAylGNUTjHX
# Dx9lVDz8llr68OP+bdUOTO9mlx+t1gI6SVg9U9gUKHbr95xVhMlyRuwwmqwdsPK8
# U+8kZyAi9w==
# =uAGp
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 Dec 2024 11:31:40 AM CET
# gpg: using RSA key DDD262283D111B233B6EB8A8C13766E6868B83D7
# gpg: issuer "krzk@kernel.org"
# gpg: Good signature from "Krzysztof Kozlowski <k.kozlowski.k@gmail.com>" [marginal]
# gpg: aka "Krzysztof Kozlowski <krzk@kernel.org>" [marginal]
# gpg: aka "Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>" [marginal]
# gpg: aka "Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>" [marginal]
# gpg: aka "Krzysztof Kozłowski <k.kozlowski.k@gmail.com>" [marginal]
# gpg: krzk@kernel.org: Verified 3 signatures in the past 3 years. Encrypted 0
# messages.
# gpg: Warning: you have yet to encrypt a message to this key!
# gpg: Warning: if you think you've seen more signatures by this key and user
# id, then this key might be a forgery! Carefully examine the email address
# for small variations. If the key is suspect, then use
# gpg --tofu-policy bad 9BD07E0E0C51F8D59677B7541B93437D3B41629B
# to mark it as being bad.
# gpg: WARNING: The key's User ID is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 9BD0 7E0E 0C51 F8D5 9677 B754 1B93 437D 3B41 629B
# Subkey fingerprint: DDD2 6228 3D11 1B23 3B6E B8A8 C137 66E6 868B 83D7
|
|
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016ca9 ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
unregister the phy provider
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff764963479a ("drivers: phy: add generic PHY framework")
Cc: stable@vger.kernel.org
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In am654_hbmc_platform_driver, .remove() and the error path of .probe()
do not decrement the refcount of an OF node obtained by
of_get_next_child(). Fix this by adding of_node_put() calls.
Fixes: aca31ce96814 ("mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Nuvoton MA35 SoCs NAND Flash Interface Controller
supports 2kiB, 4kiB and 8kiB page size, and up to
8-bit, 12-bit, and 24-bit hardware ECC calculation
circuit to protect data.
Signed-off-by: Hui-Ping Chen <hpchen0nvt@gmail.com>
[Miquel Raynal: Fixed compatible and driver name to match latest bindings]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
