summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-10-26bnxt_en: Re-write PCI BARs after PCI fatal error.Vasundhara Volam
When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.Vasundhara Volam
As part of the commit b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().Vasundhara Volam
A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b59cc0 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: core: Fix use-after-free in mlxsw_emad_trans_finish()Amit Cohen
Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: core: Fix memory leak on module removalIdo Schimmel
Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a96291 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Vadim Pasternak <vadimp@nvidia.com> Tested-by: Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26mlxsw: Only advertise link modes supported by both driver and deviceAmit Cohen
During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891268d ("mlxsw: Remove 56G speed support") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26s390/ism: fix incorrect system EIDKarsten Graul
The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26cxgb4: set up filter action after rewritesRaju Rangoju
The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26net: hns3: clean up a return in hclge_tm_bp_setup()Dan Carpenter
Smatch complains that "ret" might be uninitialized if we don't enter the loop. We do always enter the loop so it's a false positive, but it's cleaner to just return a literal zero and that silences the warning as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023112212.GA282278@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-26scsi: qla2xxx: remove incorrect sparse #ifdefLinus Torvalds
The code to try to shut up sparse warnings about questionable locking didn't shut up sparse: it made the result not parse as valid C at all, since the end result now has a label with no statement. The proper fix is to just always lock the hardware, the same way Bart did in commit 8ae178760b23 ("scsi: qla2xxx: Simplify the functions for dumping firmware"). That avoids the whole problem with having locking that is not statically obvious. But in the meantime, just remove the incorrect attempt at trying to avoid a sparse warning that just made things worse. This was exposed by commit 3e6efab865ac ("scsi: qla2xxx: Fix reset of MPI firmware"), very similarly to how commit cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem in another place, and caused that commit 8ae178760b23. Please don't add code to just shut up sparse without actually fixing what sparse complains about. Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Arun Easi <aeasi@marvell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-26RDMA/uverbs: Fix false error in query gid IOCTLGal Pressman
Some drivers (such as EFA) have a GID table, but aren't IB/RoCE devices. Remove the unnecessary rdma_ib_or_roce() check. This fixes rdma-core failures for EFA when it uses the new ioctl interface for querying the GID table. Fixes: 9f85cbe50aa0 ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/20201026082621.32463-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA/mlx5: Fix devlink deadlock on net namespace deletionParav Pandit
When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA/rxe: Fix small problem in network_type patchBob Pearson
The patch referenced below has a typo that results in using the wrong L2 header size for outbound traffic. (V4 <-> V6). It also breaks kernel-side RC traffic because they use AVs that use RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by transcoding between these enum types. Fixes: e0d696d201dd ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI") Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26scsi: hisi_sas: Stop using queue #0 always for v2 hwJohn Garry
In commit 8d98416a55eb ("scsi: hisi_sas: Switch v3 hw to MQ"), the dispatch function was changed to choose the delivery queue based on the request tag HW queue index. This heavily degrades performance for v2 hw, since the HW queues are not exposed there, and, as such, HW queue #0 is used for every command. Revert to previous behaviour for when nr_hw_queues is not set, that being to choose the HW queue based on target device index. Link: https://lore.kernel.org/r/1602750425-240341-1-git-send-email-john.garry@huawei.com Fixes: 8d98416a55eb ("scsi: hisi_sas: Switch v3 hw to MQ") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26drm/amd/display: Clean up debug macrosTakashi Iwai
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros: - Move the dependency check of CONFIG_KGDB into Kconfig - Unify the kgdb_breakpoint() call - Drop the non-existing CONFIG_HAVE_KGDB Also align the behavior of ASSERT() macro in both cases with and without CONFIG_DEBUG_KERNEL_DC. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Don't invoke kgdb_breakpoint() unconditionallyTakashi Iwai
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Fix kernel panic by dal_gpio_open() errorTakashi Iwai
Currently both error code paths handled in dal_gpio_open_ex() issues ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if CONFIG_KGDB is enabled. Since basically both are non-critical errors and can be recovered, drop those assert calls and use a safer one, BREAK_TO_DEBUGGER(), for allowing the debugging, instead. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amdgpu/display: use kvzalloc again in dc_create_stateAlex Deucher
It looks this was accidently lost in a follow up patch. dc context is large and we don't need contiguous pages. Fixes: e4863f118a7d ("drm/amd/display: Multi display cause system lag on mode change") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Alex Xu <alex_y_xu@yahoo.ca> Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Cc: stable@vger.kernel.org
2020-10-26drm/amd/display: adding ddc_gpio_vga_reg_list to ddc reg def'nsMartin Leung
why: oem-related ddc read/write fails without these regs how: copy from hw_factory_dcn20.c Signed-off-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26scsi: ibmvscsi: Fix potential race after loss of transportTyrel Datwyler
After a loss of transport due to an adapter migration or crash/disconnect from the host partner there is a tiny window where we can race adjusting the request_limit of the adapter. The request limit is atomically increased/decreased to track the number of inflight requests against the allowed limit of our VIOS partner. After a transport loss we set the request_limit to zero to reflect this state. However, there is a window where the adapter may attempt to queue a command because the transport loss event hasn't been fully processed yet and request_limit is still greater than zero. The hypercall to send the event will fail and the error path will increment the request_limit as a result. If the adapter processes the transport event prior to this increment the request_limit becomes out of sync with the adapter state and can result in SCSI commands being submitted on the now reset connection prior to an SRP Login resulting in a protocol violation. Fix this race by protecting request_limit with the host lock when changing the value via atomic_set() to indicate no transport. Link: https://lore.kernel.org/r/20201025001355.4527-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26drm/amd/display: prevent null pointer accessDmytro Laktyushkin
Prevent null pointer access when checking odm tree. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org>
2020-10-26drm/amdgpu: increase the reserved VM size to 2MBChristian König
Ideally this should be a multiple of the VM block size. 2MB should at least fit for Vega/Navi. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-10-26drm/amd/display: Fixed panic during seamless boot.David Galiffi
[why] get_pixel_clk_frequency_100hz is undefined in clock_source_funcs. [how] set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz" Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amdgpu: don't map BO in reserved regionMadhav Chauhan
2MB area is reserved at top inside VM. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-10-26drm/amdgpu: add DID for navi10 blockchain SKUTianci.Yin
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amdgpu: disable DCN and VCN for navi10 blockchain SKU(v3)Tianci.Yin
The blockchain SKU has no display and video support, remove them. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()Helge Deller
The mptscsih_remove() function triggers a kernel oops if the Scsi_Host pointer (ioc->sh) is NULL, as can be seen in this syslog: ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} Begin: Waiting for root file system ... scsi host2: error handler thread failed to spawn, error = -4 mptspi: ioc0: WARNING - Unable to register controller with SCSI subsystem Backtrace: [<000000001045b7cc>] mptspi_probe+0x248/0x3d0 [mptspi] [<0000000040946470>] pci_device_probe+0x1ac/0x2d8 [<0000000040add668>] really_probe+0x1bc/0x988 [<0000000040ade704>] driver_probe_device+0x160/0x218 [<0000000040adee24>] device_driver_attach+0x160/0x188 [<0000000040adef90>] __driver_attach+0x144/0x320 [<0000000040ad7c78>] bus_for_each_dev+0xd4/0x158 [<0000000040adc138>] driver_attach+0x4c/0x80 [<0000000040adb3ec>] bus_add_driver+0x3e0/0x498 [<0000000040ae0130>] driver_register+0xf4/0x298 [<00000000409450c4>] __pci_register_driver+0x78/0xa8 [<000000000007d248>] mptspi_init+0x18c/0x1c4 [mptspi] This patch adds the necessary NULL-pointer checks. Successfully tested on a HP C8000 parisc workstation with buggy SCSI drives. Link: https://lore.kernel.org/r/20201022090005.GA9000@ls3530.fritz.box Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26scsi: qla2xxx: Return EBUSY on fcport deletionDaniel Wagner
When the fcport is about to be deleted we should return EBUSY instead of ENODEV. Only for EBUSY will the request be requeued in a multipath setup. Also return EBUSY when the firmware has not yet started to avoid dropping the request. Link: https://lore.kernel.org/r/20201014073048.36219-1-dwagner@suse.de Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26scsi: core: Don't start concurrent async scan on same hostMing Lei
The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26mtd: rawnand: ifc: Move the ECC engine initialization to the right placeFabio Estevam
No ECC initialization should happen during the host controller probe. In fact, we need the probe function to call nand_scan() in order to: - identify the device, its capabilities and constraints (nand_scan_ident()) - configure the ECC engine accordingly (->attach_chip()) - scan its content and prepare the core (nand_scan_tail()) Moving these lines to fsl_ifc_attach_chip() fixes a regression caused by a previous commit supposed to clarify these steps. Based on a fix done for the mxc_nand driver by Miquel Raynal. Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Reported-by: Han Xu <xhnjupt@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Han Xu <xhnjupt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201016132626.30112-1-festevam@gmail.com
2020-10-26mtd: rawnand: mxc: Move the ECC engine initialization to the right placeFabio Estevam
No ECC initialization should happen during the host controller probe. In fact, we need the probe function to call nand_scan() in order to: - identify the device, its capabilities and constraints (nand_scan_ident()) - configure the ECC engine accordingly (->attach_chip()) - scan its content and prepare the core (nand_scan_tail()) Moving these lines to mxcnd_attach_chip() fixes a regression caused by a previous commit supposed to clarify these steps. When moving the ECC initialization from probe() to attach(), get rid of the pdata usage to determine the engine type and let the core decide instead. Tested on a imx27-pdk board. Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Reported-by: Fabio Estevam <festevam@gmail.com> Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201016213613.1450-1-festevam@gmail.com
2020-10-26Merge tag 'scmi-fixes-5.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.10 Handful of fixes, some of them fixing issues since SCMI was merged. It indicates that it is getting used now and people are finding bugs. Fixes include unblocking multiple thread access with SMC/HVC transport, ARCH_COLD_RESET value, locking in notifications, avoiding workqueue name duplication with multiple instances of SCMI and adding missing Rx size initialisation when using buffers for repeat transmits. * tag 'scmi-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications firmware: arm_scmi: Add missing Rx size re-initialisation firmware: arm_scmi: Expand SMC/HVC message pool to more than one firmware: arm_scmi: Fix ARCH_COLD_RESET Link: https://lore.kernel.org/r/20201015123518.GA3839@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26drm/v3d: Fix double free in v3d_submit_cl_ioctl()Dan Carpenter
Originally this error path used to leak "bin" but then we accidentally applied two separate commits to fix it and ended up with a double free. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201026094905.GA1634423@mwanda
2020-10-26drm/sun4i: frontend: Fix the scaler phase on A33Maxime Ripard
The A33 has a different phase parameter in the Allwinner BSP on the channel1 than the one currently applied. Fix this. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-3-maxime@cerno.tech
2020-10-26drm/sun4i: frontend: Reuse the ch0 phase for RGB formatsMaxime Ripard
When using the scaler on the A10-like frontend with single-planar formats, the current code will setup the channel 0 filter (used for the R or Y component) with a different phase parameter than the channel 1 filter (used for the G/B or U/V components). This creates a bleed out that keeps repeating on of the last line of the RGB plane across the rest of the display. The Allwinner BSP either applies the same phase parameter over both channels or use a separate one, the condition being whether the input format is YUV420 or not. Since YUV420 is both subsampled and multi-planar, and since YUYV is subsampled but single-planar, we can rule out the subsampling and assume that the condition is actually whether the format is single or multi-planar. And it looks like applying the same phase parameter over both channels for single-planar formats fixes our issue, while we keep the multi-planar formats working properly. Reported-by: Taras Galchenko <tpgalchenko@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
2020-10-26drm/sun4i: frontend: Rework a bit the phase dataMaxime Ripard
The scaler filter phase setup in the allwinner kernel has two different cases for setting up the scaler filter, the first one using different phase parameters for the two channels, and the second one reusing the first channel parameters on the second channel. The allwinner kernel has a third option where the horizontal phase of the second channel will be set to a different value than the vertical one (and seems like it's the same value than one used on the first channel). However, that code path seems to never be taken, so we can ignore it for now, and it's essentially what we're doing so far as well. Since we will have always the same values across each components of the filter setup for a given channel, we can simplify a bit our frontend structure by only storing the phase value we want to apply to a given channel. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-1-maxime@cerno.tech
2020-10-26Merge remote-tracking branch 'drm-misc/drm-misc-next-fixes' into drm-misc-fixesMaxime Ripard
We have a few leftovers from the merge window period in drm-misc-next-fixes, let's bring them into drm-misc-fixes Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-10-26drm/imx: dw_hdmi-imx: remove empty encoder_disable callbackPhilipp Zabel
This has not been required since commit 75229eca569f ("drm: Make drm_encoder_helper_funcs optional"). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-26Merge tag 'tee-fix-for-v5.10' of ↵Arnd Bergmann
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Reenable kernel login method for kernel TEE client API The kernel TEE login method was accidentally disabled previously when enabling a few other login methods, so fix that here. * tag 'tee-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: client UUID: Skip REE kernel login method as well Link: https://lore.kernel.org/r/20201013070918.GA3328976@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26drm/imx: drop explicit drm_mode_config_cleanupPhilipp Zabel
Use drmm_mode_config_init() and drop the explicit calls to drm_mode_config_cleanup(). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-10-26drm/imx: imx-tve: remove redundant enable trackingPhilipp Zabel
The DRM core already takes care that encoder enable and disable calls are balanced. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-26drm/imx: imx-tve: use regmap fast_io spinlockPhilipp Zabel
Replace the custom spinlock with the fast_io spinlock provided by regmap. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-10-26drm/imx: dw_hdmi-imx: use imx_drm_encoder_parse_ofPhilipp Zabel
This is the same code and comment that is already shared by imx-ldb, imx-tve, and parallel-display in imx_drm_encoder_parse_of(). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2020-10-26gpu: ipu-v3: remove unused functionsPhilipp Zabel
ipu_mbus_code_to_colorspace, ipu_stride_to_bytes, and ipu_pixelformat_is_planar are unused. Remove them. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2020-10-25of: Fix reserved-memory overlap detectionVincent Whitchurch
The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25Merge tag 'ntb-5.10' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
2020-10-25Merge branch 'i2c/for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
generated by cgit (git 2.34.1) at 2025-09-30 11:17:00 +0000