summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-16amiflop: clean up on errors during setupOmar Sandoval
The error handling in fd_probe_drives() doesn't clean up at all. Fix it up in preparation for converting to blk-mq. While we're here, get rid of the commented out amiga_floppy_remove(). Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16amiflop: fold headers into C fileOmar Sandoval
amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty small, so move the contents to amiflop.c and get rid of the .h files. This is preparation for adding a struct blk_mq_tag_set to struct amiga_floppy_struct. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim3: convert to blk-mqOmar Sandoval
Pretty simple conversion. grab_drive() could probably be replaced by some freeze/quiesce incantation, but I left it alone, and just used freeze/quiesce for eject. Compile-tested only. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim3: add real error handling in setupOmar Sandoval
The driver doesn't have support for removing a device that has already been configured, but with more careful ordering we can avoid the need for that and make sure that we don't leak generic resources. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim: convert to blk-mqOmar Sandoval
The only interesting thing here is that there may be two floppies (i.e., request queues) sharing the same controller, so we use the global struct swim_priv->lock to check whether the controller is busy. Compile-tested only. Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Converted to blk_mq_init_sq_queue() Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16swim: fix cleanup on setup errorOmar Sandoval
If we fail to allocate the request queue for a disk, we still need to free that disk, not just the previous ones. Additionally, we need to cleanup the previous request queues. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16drm/i915/icl: apply Display WA #1178 to fix type C donglesLucas De Marchi
Display WA #1178 is meant to fix Aux channel voltage swing too low with some type C dongles. It applies to external ports on combo phy. On Icelake this is port A and B when those are not eDP. v2: follow the spec to the letter: include Aux A and just check if it's not eDP instead of checking only for Aux B. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012215758.25342-1-lucas.demarchi@intel.com
2018-10-16clk: ti: Prepare for remove of OF node nameStephen Boyd
Another patch is going to change this code to use %pOFn for DT node names. Fix up the code to make this easy to pick this side of the merge instead of fixing it up in a merge commit later. Cc: Tero Kristo <t-kristo@ti.com> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16IB/ucm: Fix Spectre v1 vulnerabilityGustavo A. R. Silva
hdr.cmd can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential spectre issue 'ucm_cmd_table' [r] (local cap) Fix this by sanitizing hdr.cmd before using it to index ucm_cmd_table. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16dmaengine: ppc4xx: fix off-by-one build failureChristian Lamparter
There are two poly_store, but one should have been poly_show. |adma.c:4382:16: error: conflicting types for 'poly_store' | static ssize_t poly_store(struct device_driver *dev, const char *buf, | ^~~~~~~~~~ |adma.c:4363:16: note: previous definition of 'poly_store' was here | static ssize_t poly_store(struct device_driver *dev, char *buf) | ^~~~~~~~~~ CC: stable@vger.kernel.org Fixes: 13efe1a05384 ("dmaengine: ppc4xx: remove DRIVER_ATTR() usage") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-10-16IB/mlx5: Fix MR cache initializationArtemy Kovalyov
Schedule MR cache work only after bucket was initialized. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/cm: Respect returned status of cm_init_av_by_pathLeon Romanovsky
Add missing check for failure of cm_init_av_by_path Fixes: e1444b5a163e ("IB/cm: Fix automatic path migration support") Reported-by: Slava Shwartsman <slavash@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16IB/ipoib: Clear IPCB before icmp_sendDenis Drozdov
IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by: Denis Drozdov <denisd@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16RDMA/restrack: Protect from reentry to resource return pathLeon Romanovsky
Nullify the resource task struct pointer to ensure that subsequent calls won't try to release task_struct again. ------------[ cut here ]------------ ODEBUG: free active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted 4.19.0-rc7-next-20181008+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x3ab lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326 Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14 dd 60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05 a9 f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005 RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001 R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0 __debug_check_no_obj_freed lib/debugobjects.c:786 [inline] debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818 kmem_cache_free+0x202/0x290 mm/slab.c:3759 free_task_struct kernel/fork.c:163 [inline] free_task+0x16e/0x1f0 kernel/fork.c:457 __put_task_struct+0x2e6/0x620 kernel/fork.c:730 put_task_struct include/linux/sched/task.h:96 [inline] finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715 context_switch kernel/sched/core.c:2834 [inline] __schedule+0x8d7/0x21d0 kernel/sched/core.c:3480 schedule+0xfe/0x460 kernel/sched/core.c:3524 freezable_schedule include/linux/freezer.h:172 [inline] futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530 futex_wait+0x45c/0xa50 kernel/futex.c:2645 do_futex+0x31a/0x26d0 kernel/futex.c:3528 __do_sys_futex kernel/futex.c:3589 [inline] __se_sys_futex kernel/futex.c:3557 [inline] __x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446549 Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38 RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c Kernel Offset: disabled Reported-by: syzbot+71aff6ea121ffefc280f@syzkaller.appspotmail.com Fixes: ed7a01fd3fd7 ("RDMA/restrack: Release task struct which was hold by CM_ID object") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16mtd_blkdevs: convert to blk-mqJens Axboe
Straight forward conversion, using an internal list to enable the driver to pull requests at will. Dynamically allocate the tag set to avoid having to pull in the block headers for blktrans.h, since various mtd drivers use block conflicting names for defines and functions. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Tested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-16drm/i915: Pass crtc_state to ivybridge_update_fdi_bc_bifurcationMaarten Lankhorst
We have to look at crtc_state, so pass that instead. Also cleanup the use of dev vs dev_priv, we really want to pass along dev_priv. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-10-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Pass crtc_state to lpt_program_iclkipMaarten Lankhorst
Instead of derferencing crtc->config, look at crtc_state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-9-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Remove crtc->config dereferences in intel_modeset_setup_hw_stateMaarten Lankhorst
The CRTC is idle at this point, so we can dereference crtc->state safely. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [mlankhorst: Keep dev_priv->drm in for_each_intel_crtc (Ville)] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-8-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Remove crtc->config dereferences in intel_sanitize_crtcMaarten Lankhorst
We know the crtc is idle because we're at the beginning of sanitization, so just dereference crtc->state instead. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-7-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Pass crtc_state to update_scanline_offsetMaarten Lankhorst
No need to look at crtc->config when we have crtc_state in the caller. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-6-maarten.lankhorst@linux.intel.com
2018-10-16drm/edid: VSDB yCBCr420 Deep Color mode bit definitionsClint Taylor
HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct definitions in the header for the mask to work correctly. Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893 Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
2018-10-16drm/i915: Always read out M2_N2 in intel_cpu_transcoder_get_m_n, v2.Maarten Lankhorst
has_drrs is a flag we can't read out. We set it when seamless DRRS is enabled in pipe_config, so intel_dump_pipe_config() and intel_pipe_config_compare() will continue to do the right thing when has_drrs is set on the real state. This removes one more dereference of crtc->config. While at it, fixup the comment and also read out M2_N2 for CHV, since we program it in the set_m_n function. Changes since v1: - Only read out M2/N2 on platforms that support DRRS. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015094023.6211-1-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Remove crtc->config references in vlv_prepare_pllMaarten Lankhorst
We already have a perfectly nice pipe_config, use that instead. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-4-maarten.lankhorst@linux.intel.com
2018-10-16drm/i915: Make intel_dp_set_m_n take crtc_stateMaarten Lankhorst
Another user of crtc->config gone. The functions it calls also needed crtc->config, so convert those as well. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [mlankhorst: Still pass m_n struct to intel_pch_transcoder_set_m_n (Ville)] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-3-maarten.lankhorst@linux.intel.com
2018-10-16drm/rockchip: psr: do not dereference encoder before it is null checked.Enric Balletbo i Serra
'encoder' is dereferenced before it is null sanity checked, hence we potentially have a null pointer dereference bug. Instead, initialise drm_drv from encoder->dev->dev_private after we are sure 'encoder' is not null. Fixes: 5182c1a556d7f ("drm/rockchip: add an common abstracted PSR driver") Cc: stable@vger.kernel.org Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
2018-10-16drm: add flags to drm_syncobj_find_fenceChunming Zhou
flags can be used by driver to decide whether need to block wait submission. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> SIgned-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.kernel.org/patch/10641339/
2018-10-16drm: Shift * to be adjacent to pointer nameMamta Shukla
Shift * to be adjacent to pointer name to follow Linux coding style. Issue found with checkpatch.pl ERROR: "foo * bar" should be "foo *bar" Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181015212644.GA28579@armorer
2018-10-16pwm: lpss: Only set update bit if we are actually changing the settingsHans de Goede
According to the datasheet the update bit must be set if the on-time-div or the base-unit changes. Now that we properly order device resume on Cherry Trail so that the GFX0 _PS0 method no longer exits with an error, we end up with a sequence of events where we are writing the same values twice in a row. First the _PS0 method restores the duty cycle of 0% the GPU driver set on suspend and then the GPU driver first updates just the enabled bit in the pwm_state from 0 to 1, causing us to write the same values again, before restoring the pre-suspend duty-cycle in a separate pwm_apply call. When writing the update bit the second time, without changing any of the values the update bit clears immediately / instantly, instead of staying 1 for a while as usual. After this the next setting of the update bit seems to be ignored, causing the restoring of the pre-suspend duty-cycle to not get applied. This makes the backlight come up with a 0% dutycycle after suspend/resume. Any further brightness changes after this do work. This commit moves the setting of the update bit into pwm_lpss_prepare() and only sets the bit if we have actually changed any of the values. This avoids the setting of the update bit the second time we configure the PWM to 0% dutycycle, this fixes the backlight coming up with 0% duty-cycle after a suspend/resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-16pwm: lpss: Force runtime-resume on suspend on Cherry TrailHans de Goede
On Cherry Trail devices under Windows the PWM controller used for the backlight is considered part of the GPU even though it is part of the LPSS block and thus is an entirely different independent hardware unit. Because of this on Cherry Trail the GPU's (GFX0 ACPI node) _PS3 and _PS0 methods save and restore the PWM controller registers. If userspace blanks the screen before suspending, such as e.g. GNOME does, then the PWM controller will be runtime-suspended when the suspend starts. This causes the GFX0 _PS? methods to save a value of 0xffffffff for the PWM control register and to restore this value on resume. 0xffffffff is not a valid value for the register and writing this causes problems such as e.g. a flickering backlight. This commit adds a prepare method to the dev_pm_ops and makes it return 0 on Cherry Trail devices forcing a runtime-resume before other device's suspend methods run. This fixes the reading and writing back of 0xffffffff. Since we now always runtime-resume the device on suspend, it will be resumed on resume too and we no longer need to check for the GFX0 _PS0 method having resumed it underneath us, so this commit removes the now no longer necessary complete dev_pm_op. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-16pwm: Enable TI ECAP driver for ARCH_K3Vignesh R
K3 devices have the same ECAP IP as OMAP SoCs. Enable driver to be built for K3 devices. Also, drop reference to AM33xx in help text, as IP is found on multiple TI SoCs. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-10-16USB: fix the usbfs flag sanitization for control transfersAlan Stern
Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the transfer flags for URBs submitted from userspace via usbfs. However, the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be allowed for a control transfer was added in the wrong place, before the code has properly determined the direction of the control transfer. (Control transfers are special because for them, the direction is set by the bRequestType byte of the Setup packet rather than direction bit of the endpoint address.) This patch moves code which sets up the allow_short flag for control transfers down after is_in has been set to the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16rtc: m41t80: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced "Fall" with a proper "Fall through" comment. Addresses-Coverity-ID: 1373875 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-10-16rtc: tegra: Propagate errors from platform_get_irq()Thierry Reding
Instead of confusingly returning -EBUSY on failure to obtain an interrupt, propagate the real error code. While at it, let the user know why the interrupt could not be acquired. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-10-16devres: provide devm_kstrdup_const()Bartosz Golaszewski
Provide a resource managed version of kstrdup_const(). This variant internally calls devm_kstrdup() on pointers that are outside of .rodata section and returns the string as is otherwise. Make devm_kfree() check if the passed pointer doesn't point to .rodata and if so - don't actually destroy the resource. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16devres: constify p in devm_kfree()Bartosz Golaszewski
Make devm_kfree() signature uniform with that of kfree(). To avoid compiler warnings: cast p to (void *) when calling devres_destroy(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16cpufreq: conservative: Take limits changes into account properlyRafael J. Wysocki
If the policy limits change between invocations of cs_dbs_update(), the requested frequency value stored in dbs_info may not be updated and the function may use a stale value of it next time. Moreover, if idle periods are takem into account by cs_dbs_update(), the requested frequency value stored in dbs_info may be below the min policy limit, which is incorrect. To fix these problems, always update the requested frequency value in dbs_info along with the local copy of it when the previous requested frequency is beyond the policy limits and avoid decreasing the requested frequency below the min policy limit when taking idle periods into account. Fixes: abb6627910a1 (cpufreq: conservative: Fix next frequency selection) Fixes: 00bfe05889e9 (cpufreq: conservative: Decrease frequency faster for deferred updates) Reported-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-10-16drm/i915/icl: Disable master intr before readingMika Kuoppala
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-3-mika.kuoppala@linux.intel.com
2018-10-16drm/i915/icl: No need to ack intr through master controlMika Kuoppala
All other master control register bits, except the enable, are read only and they are level indications of the second level interrupt status. Only touch enable bit and rectify the comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-2-mika.kuoppala@linux.intel.com
2018-10-16drm/i915/gen8: Disable master intr before readingMika Kuoppala
Disable master interrupt before reading level indications. This will close a race where we get a level indication between reading and disabling, generating an extra interrupt where we could have avoided one. Further, as the reading acts also as a post, replace the write/post on the irq reset with the helper. On enabling side, posting doesn't serve any purpose so it can also be replaced with helper. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181015141440.21845-1-mika.kuoppala@linux.intel.com
2018-10-16fpga: add devm_fpga_region_createAlan Tull
Add devm_fpga_region_create() which is the managed version of fpga_region_create(). Change current region drivers to use devm_fpga_region_create(). Signed-off-by: Alan Tull <atull@kernel.org> Suggested-by: Federico Vaga <federico.vaga@cern.ch> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16fpga: bridge: add devm_fpga_bridge_createAlan Tull
Add devm_fpga_bridge_create() which is the managed version of fpga_bridge_create(). Change current bridge drivers to use devm_fpga_bridge_create(). Signed-off-by: Alan Tull <atull@kernel.org> Suggested-by: Federico Vaga <federico.vaga@cern.ch> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16fpga: mgr: add devm_fpga_mgr_createAlan Tull
Add devm_fpga_mgr_create() which is the managed version of fpga_mgr_create(). Change current FPGA manager drivers to use devm_fpga_mgr_create() Signed-off-by: Alan Tull <atull@kernel.org> Suggested-by: Federico Vaga <federico.vaga@cern.ch> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-16cpufreq: intel_pstate: Add base_frequency attributeSrinivas Pandruvada
Expose base_frequency to user space via cpufreq sysfs when HWP is in use. This HWP base frequency is read from the ACPI _CPC object if present, or from the HWP Capabilities MSR otherwise. On the majority of the HWP platforms the _CPC object will point to the HWP Capabilities MSR using the "Functional Fixed Hardware" address space type. The address space type also can simply be ACPI_TYPE_INTEGER, however, in which case the platform firmware can set its value at the initialization time based on the system constraints. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-16ACPI / CPPC: Add support for guaranteed performanceSrinivas Pandruvada
The Continuous Performance Control package may contain an optional guaranteed performance field. Add support to read guaranteed performance from _CPC. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-16pinctrl: sunxi: Fix a memory leak in 'sunxi_pinctrl_build_state()'Christophe JAILLET
If 'krealloc()' fails, 'pctl->functions' is set to NULL. We should instead use a temp variable in order to be able to free the previously allocated memeory, in case of OOM. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-16ACPI/ADXL: Add address translation interface using an ACPI DSMTony Luck
Some new Intel servers provide an interface so that the OS can ask the BIOS to translate a system physical address to a memory address (socket, memory controller, channel, rank, dimm, etc.). This is useful for EDAC drivers that want to take the address of an error reported in a machine check bank and let the user know which DIMM may need to be replaced. Specification for this interface is available at: https://cdrdv2.intel.com/v1/dl/getContent/603354 [ Based on earlier code by Qiuxu Zhuo <qiuxu.zhuo@intel.com>. ] [ bp: Make the first pr_info() in adxl_init() pr_debug() so that it doesn't pollute every dmesg. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/20181015202620.23610-1-tony.luck@intel.com
2018-10-16gpio: uniphier: include <linux/bits.h> instead of <linux/bitops.h>Masahiro Yamada
The reason of including <linux/bitops.h> here is just for BIT() and GENMASK macros. Since commit 8bd9cb51daac8 ("locking/atomics, asm-generic: Move some macros from <linux/bitops.h> to a new <linux/bits.h> file"), <linux/bits.h> is enough for such compile-time macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-16pinctrl: uniphier: include <linux/bits.h> instead of <linux/bitops.h>Masahiro Yamada
The reason of including <linux/bitops.h> here is just for BIT() macro. Since commit 8bd9cb51daac8 ("locking/atomics, asm-generic: Move some macros from <linux/bitops.h> to a new <linux/bits.h> file"), <linux/bits.h> is enough for such compile-time macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-16gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip()Stephen Boyd
This doesn't support nested anymore, so drivers shouldn't call it with the handler set to NULL. Cc: Evan Green <evgreen@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-16gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip()Stephen Boyd
This argument hasn't ever been used since it was introduced in commit 1425052097b5 ("gpio: add IRQ chip helpers in gpiolib"). Let's drop it to reduce reading confusion. Cc: Evan Green <evgreen@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>