summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-06-07net/mlx4_en: Fix wrong return value on ioctl EEPROM query failureGal Pressman
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-07net: dsa: lantiq_gswip: Fix refcount leak in gswip_gphy_fw_listMiaoqian Lin
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220605072335.11257-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08libata: fix translation of concurrent positioning rangesTyler Erickson
Fixing the page length in the SCSI translation for the concurrent positioning ranges VPD page. It was writing starting in offset 3 rather than offset 2 where the MSB is supposed to start for the VPD page length. Cc: stable@vger.kernel.org Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com> Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com> Tested-by: Michael English <michael.english@seagate.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-08libata: fix reading concurrent positioning ranges logTyler Erickson
The concurrent positioning ranges log is not a fixed size and may depend on how many ranges are supported by the device. This patch uses the size reported in the GPL directory to determine the number of pages supported by the device before attempting to read this log page. This resolves this error from the dmesg output: ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1 Cc: stable@vger.kernel.org Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com> Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com> Tested-by: Michael English <michael.english@seagate.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-07scsi: pmcraid: Fix missing resource cleanup in error caseChengguang Xu
Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu
Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Update lpfc version to 14.2.0.4James Smart
Update lpfc version to 14.2.0.4 Link: https://lore.kernel.org/r/20220603174329.63777-10-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completionJames Smart
NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmdsJames Smart
When an NVMe command is aborted or completes with an ERSP, log the opcode and command ID fields to help provide more detail on the failed command. Link: https://lore.kernel.org/r/20220603174329.63777-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topologyJames Smart
After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is abortedJames Smart
A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure. Link: https://lore.kernel.org/r/20220603174329.63777-6-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Address NULL pointer dereference after starget_to_rport()James Smart
Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference. Link: https://lore.kernel.org/r/20220603174329.63777-5-jsmart2021@gmail.com Fixes: bb21fc9911ee ("scsi: lpfc: Use fc_block_rport()") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve some cleanup issues following SLI path refactoringJames Smart
Following refactoring and consolidation in SLI processing, fix up some minor issues related to SLI path: - Correct the setting of LPFC_EXCHANGE_BUSY flag in response IOCB. - Fix some typographical errors. - Fix duplicate log messages. Link: https://lore.kernel.org/r/20220603174329.63777-4-jsmart2021@gmail.com Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Resolve some cleanup issues following abort path refactoringJames Smart
Refactoring and consolidation of abort paths: - lpfc_sli4_abort_fcp_cmpl() and lpfc_sli_abort_fcp_cmpl() are combined into a single generic lpfc_sli_abort_fcp_cmpl() routine. Thus, remove extraneous lpfc_sli4_abort_fcp_cmpl() prototype declaration. - lpfc_nvme_abort_fcreq_cmpl() abort completion routine is called with a mismatched argument type. This may result in misleading log message content. Update to the correct argument type of lpfc_iocbq instead of lpfc_wcqe_complete. The lpfc_wcqe_complete should be derived from the lpfc_iocbq structure. Link: https://lore.kernel.org/r/20220603174329.63777-3-jsmart2021@gmail.com Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: <stable@vger.kernel.org> # v5.18 Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()James Smart
A previous commit assumed all XMIT_SEQ64_WQEs are prepped with the correct BDE type in word 0-2. However, lpfc_ct_reject_event() routine was missed and is still filling out the incorrect BDE type. Fix lpfc_ct_reject_event() routine so that type BUFF_TYPE_BDE_64 is set instead of BUFF_TYPE_BLP_64. Link: https://lore.kernel.org/r/20220603174329.63777-2-jsmart2021@gmail.com Fixes: 596fc8adb171 ("scsi: lpfc: Fix dmabuf ptr assignment in lpfc_ct_reject_event()") Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: vmw_pvscsi: Expand vcpuHint to 16 bitsWentao Wang
vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com Signed-off-by: Wentao Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07scsi: sd: Fix interpretation of VPD B9h lengthTyler Erickson
Fixing the interpretation of the length of the B9h VPD page (Concurrent Positioning Ranges). Adding 4 is necessary as the first 4 bytes of the page is the header with page number and length information. Adding 3 was likely a misinterpretation of the SBC-5 specification which sets all offsets starting at zero. This fixes the error in dmesg: [ 9.014456] sd 1:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Link: https://lore.kernel.org/r/20220602225113.10218-4-tyler.erickson@seagate.com Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support") Cc: stable@vger.kernel.org Tested-by: Michael English <michael.english@seagate.com> Reviewed-by: Muhammad Ahmad <muhammad.ahmad@seagate.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tyler Erickson <tyler.erickson@seagate.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-07Merge tag 'input-for-v5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - proper annotation of USB buffers in bcm5974 touchpad dirver - a quirk in SOC button driver to handle Lenovo Yoga Tablet2 1051F - a fix for missing dependency in raspberrypi-ts driver to avoid compile breakages with random configs. * tag 'input-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to dmi_use_low_level_irq Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag Input: raspberrypi-ts - add missing HAS_IOMEM dependency
2022-06-07Merge tag 'mmc-v5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix CQE recovery reset success for block I/O MMC host: - sdhci-pci-gli: Fix support for runtime resume - Fix unevaluatedProperties warnings in DT examples" * tag 'mmc-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: dt-bindings: mmc: Fix unevaluatedProperties warnings in examples mmc: block: Fix CQE recovery reset success mmc: sdhci-pci-gli: Fix GL9763E runtime PM when the system resumes from suspend
2022-06-07Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch
dmi_use_low_level_irq Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-07Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman
The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-07drm/amdgpu: Add MODE register to wave debug info in gfx11Joseph Greathouse
All other chips, from gfx6-gfx10, now include the MODE register at the end of the wave debug state. This appears to have been missed in gfx11, so this patch adds in MODE to the debug state for gfx11. Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07Revert "drm/amd/display: Pass the new context into disable OTG WA"Nicholas Kazlauskas
This reverts commit 8440f57532496d398a461887e56ca6f45089fbcf. Causes a hang when hotplugging DP, shutting down system, or enabling dual eDP. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"Guchun Chen
This reverts commit b992a19085885c096b19625a85c674cb89829ca1. This causes regression in GPU reset related test. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: ricetons@gmail.com Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07stmmac: intel: Fix an error handling path in intel_eth_pci_probe()Christophe JAILLET
When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467758e ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-07xen: unexport __init-annotated xen_xlate_map_ballooned_pages()Masahiro Yamada
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because none of the in-tree call-sites (arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as modular. Fixes: 243848fc018c ("xen/grant-table: Move xlated_setup_gnttab_pages to common place") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06net: ethernet: bgmac: Fix refcount leak in bcma_mdio_mii_registerMiaoqian Lin
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix wrong type string definitionTaehee Yoo
amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix possible null-ptr-deref in amt_rcv()Taehee Yoo
When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 1a1a0e80e005 ("amt: fix possible memory leak in amt_rcv()") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06amt: fix wrong usage of pskb_may_pull()Taehee Yoo
It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06drm/atomic: Force bridge self-refresh-exit on CRTC switchBrian Norris
It's possible to change which CRTC is in use for a given connector/encoder/bridge while we're in self-refresh without fully disabling the connector/encoder/bridge along the way. This can confuse the bridge encoder/bridge, because (a) it needs to track the SR state (trying to perform "active" operations while the panel is still in SR can be Bad(TM)); and (b) it tracks the SR state via the CRTC state (and after the switch, the previous SR state is lost). Thus, we need to either somehow carry the self-refresh state over to the new CRTC, or else force an encoder/bridge self-refresh transition during such a switch. I choose the latter, so we disable the encoder (and exit PSR) before attaching it to the new CRTC (where we can continue to assume a clean (non-self-refresh) state). This fixes PSR issues seen on Rockchip RK3399 systems with drivers/gpu/drm/bridge/analogix/analogix_dp_core.c. Change in v2: - Drop "->enable" condition; this could possibly be "->active" to reflect the intended hardware state, but it also is a little over-specific. We want to make a transition through "disabled" any time we're exiting PSR at the same time as a CRTC switch. (Thanks Liu Ying) Cc: Liu Ying <victor.liu@oss.nxp.com> Cc: <stable@vger.kernel.org> Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid
2022-06-06drm/bridge: analogix_dp: Support PSR-exit to disable transitionBrian Norris
Most eDP panel functions only work correctly when the panel is not in self-refresh. In particular, analogix_dp_bridge_disable() tends to hit AUX channel errors if the panel is in self-refresh. Given the above, it appears that so far, this driver assumes that we are never in self-refresh when it comes time to fully disable the bridge. Prior to commit 846c7dfc1193 ("drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2."), this tended to be true, because we would automatically disable the pipe when framebuffers were removed, and so we'd typically disable the bridge shortly after the last display activity. However, that is not guaranteed: an idle (self-refresh) display pipe may be disabled, e.g., when switching CRTCs. We need to exit PSR first. Stable notes: this is definitely a bugfix, and the bug has likely existed in some form for quite a while. It may predate the "PSR helpers" refactor, but the code looked very different before that, and it's probably not worth rewriting the fix. Cc: <stable@vger.kernel.org> Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
2022-06-06net: phy: dp83867: retrigger SGMII AN when link changeTan Tee Min
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-06xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devicesOleksandr Tyshchenko
Use the presence of "iommus" property pointed to the IOMMU node with recently introduced "xen,grant-dma" compatible as a clear indicator of enabling Xen grant mappings scheme for that device and read the ID of Xen domain where the corresponding backend is running. The domid (domain ID) is used as an argument to the Xen grant mapping APIs. To avoid the deferred probe timeout which takes place after reusing generic IOMMU device tree bindings (because the IOMMU device never becomes available) enable recently introduced stub IOMMU driver by selecting XEN_GRANT_DMA_IOMMU. Also introduce xen_is_grant_dma_device() to check whether xen-grant DMA ops need to be set for a passed device. Remove the hardcoded domid 0 in xen_grant_setup_dma_ops(). Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1654197833-25362-8-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06xen/grant-dma-iommu: Introduce stub IOMMU driverOleksandr Tyshchenko
In order to reuse generic IOMMU device tree bindings by Xen grant DMA-mapping layer we need to add this stub driver from a fw_devlink perspective (grant-dma-ops cannot be converted into the proper IOMMU driver). Otherwise, just reusing IOMMU bindings (without having a corresponding driver) leads to the deferred probe timeout afterwards, because the IOMMU device never becomes available. This stub driver does nothing except registering empty iommu_ops, the upper layer "of_iommu" will treat this as NO_IOMMU condition and won't return -EPROBE_DEFER. As this driver is quite different from the most hardware IOMMU implementations and only needed in Xen guests, place it in drivers/xen directory. The subsequent commit will make use of it. Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1654197833-25362-7-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06xen/virtio: Enable restricted memory access using Xen grant mappingsJuergen Gross
In order to support virtio in Xen guests add a config option XEN_VIRTIO enabling the user to specify whether in all Xen guests virtio should be able to access memory via Xen grant mappings only on the host side. Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06ASoC: qcom: soundwire: Add support for controlling audio CGCR from HLOSSrinivasa Rao Mandadapu
Add support for controlling soundwire audio CGCR interface using clock framework to make hclk ungating with software. As per new hardware changes, software has to always ungate hclk if soundwire is operational and keep it running. This requirement is for latest LPASS chipsets for RX, TX and WSA path to work. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Link: https://lore.kernel.org/r/1652877755-25120-1-git-send-email-quic_srivasam@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-06gpio: dln2: make irq_chip immutableAndy Shevchenko
Since recently, the kernel is nagging about mutable irq_chips: "not an immutable chip, please consider fixing it!" Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new helper functions and call the appropriate gpiolib functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-06-06gpio: sch: make irq_chip immutableAndy Shevchenko
Since recently, the kernel is nagging about mutable irq_chips: "not an immutable chip, please consider fixing it!" Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new helper functions and call the appropriate gpiolib functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-06-06gpio: merrifield: make irq_chip immutableAndy Shevchenko
Since recently, the kernel is nagging about mutable irq_chips: "not an immutable chip, please consider fixing it!" Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new helper functions and call the appropriate gpiolib functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-06-06gpio: wcove: make irq_chip immutableAndy Shevchenko
Since recently, the kernel is nagging about mutable irq_chips: "not an immutable chip, please consider fixing it!" Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new helper functions and call the appropriate gpiolib functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2022-06-06gpio: crystalcove: Join function declarations and long linesAndy Shevchenko
There is no more hard limit of 80 characters for long lines, so join a few of them for better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-06-06gpio: crystalcove: Use specific type and API for IRQ numberAndy Shevchenko
Use specific type and API for IRQ number in the callbacks. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-06-06gpio: crystalcove: make irq_chip immutableAndy Shevchenko
Since recently, the kernel is nagging about mutable irq_chips: "not an immutable chip, please consider fixing it!" Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new helper functions and call the appropriate gpiolib functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-06-06xen/grant-dma-ops: Add option to restrict memory access under XenJuergen Gross
Introduce Xen grant DMA-mapping layer which contains special DMA-mapping routines for providing grant references as DMA addresses to be used by frontends (e.g. virtio) in Xen guests. Add the needed functionality by providing a special set of DMA ops handling the needed grant operations for the I/O pages. The subsequent commit will introduce the use case for xen-grant DMA ops layer to enable using virtio devices in Xen guests in a safe manner. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/1654197833-25362-4-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06xen/grants: support allocating consecutive grantsJuergen Gross
For support of virtio via grant mappings in rare cases larger mappings using consecutive grants are needed. Support those by adding a bitmap of free grants. As consecutive grants will be needed only in very rare cases (e.g. when configuring a virtio device with a multi-page ring), optimize for the normal case of non-consecutive allocations. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/1654197833-25362-3-git-send-email-olekstysh@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-06virtio: replace arch_has_restricted_virtio_memory_access()Juergen Gross
Instead of using arch_has_restricted_virtio_memory_access() together with CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS, replace those with platform_has() and a new platform feature PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 only Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Borislav Petkov <bp@suse.de>
generated by cgit (git 2.34.1) at 2025-09-11 22:40:45 +0000