summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-05-19Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"AngeloGioacchino Del Regno
It was found that some MediaTek SoCs are incompatible with this change. Also, this register was mistakenly understood as it was related to the 16550A register layout selection but, at least on some IPs, if not all, it's related to something else unknown. This reverts commit 6f81fdded0d024c7d4084d434764f30bca1cd6b1. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Fixes: 6f81fdded0d0 ("serial: 8250_mtk: Make sure to select the right FEATURE_SEL") Reported-by: "kernelci.org bot" <bot@kernelci.org> Link: https://lore.kernel.org/r/20220510122620.150342-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: msm_serial: disable interrupts in __msm_console_write()John Ogness
__msm_console_write() assumes that interrupts are disabled, but with threaded console printers it is possible that the write() callback of the console is called with interrupts enabled. Explicitly disable interrupts using local_irq_save() to preserve the assumed context. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: meson: acquire port->lock in startup()John Ogness
The uart_ops startup() callback is called without interrupts disabled and without port->lock locked, relatively late during the boot process (from the call path of console_on_rootfs()). If the device is a console, it was already previously registered and could be actively printing messages. Since the startup() callback is reading/writing registers used by the console write() callback (AML_UART_CONTROL), its access must be synchronized using the port->lock. Currently it is not. The startup() callback is the only function that explicitly enables interrupts. Without the synchronization, it is possible that interrupts become accidentally permanently disabled. CPU0 CPU1 meson_serial_console_write meson_uart_startup -------------------------- ------------------ spin_lock(port->lock) val = readl(AML_UART_CONTROL) uart_console_write() writel(INT_EN, AML_UART_CONTROL) writel(val, AML_UART_CONTROL) spin_unlock(port->lock) Add port->lock synchronization to meson_uart_startup() to avoid racing with meson_serial_console_write(). Also add detailed comments to meson_uart_reset() explaining why it is *not* using port->lock synchronization. Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com Fixes: ff7693d079e5 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use dev_err_probe()Andy Shevchenko
Simplify the error path in ->probe() a bit by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Use devm_add_action_or_reset()Andy Shevchenko
Slightly simplify ->probe() and drop a few goto labels by using devm_add_action_or_reset() for clock and reset cleanup. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: 8250_dw: Update the list of OF headers used by driverAndy Shevchenko
The of_irq.h and of_platform.h are not used by the driver. On the other hand, the mod_devicetable.h missed. Drop the former two and add the latter one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220509161911.37164-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: jsm: Use B0 instead of 0Ilpo Järvinen
Use B0 to check zero baudrate rather than literal 0. While at it, remove extra parenthesis around CBAUD. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTSIlpo Järvinen
if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set in the else block so clearing it is unnecessary. While at it, remove also one pair of extra parenthesis. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove IBSHIFT ifdefsIlpo Järvinen
IBSHIFT is defined by all architectures since commit d0ffb805b729 ("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove BOTHER ifdefsIlpo Järvinen
BOTHER is defined by all architectures since commit d0ffb805b729 ("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: remove CMSPAR ifdefsIlpo Järvinen
CMSPAR is defined by all architectures since commit 6bf08cb246b5 ("[PATCH] Add CMSPAR to termbits.h for powerpc and alpha"). Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220513082906.11096-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: serial: samsung_tty: Fix suspend/resume on S5LHector Martin
We were restoring the IRQ masks then clearing them again, because ucon_mask wasn't set properly. Adding that makes suspend/resume work as intended. Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220502092505.30934-1-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove initial printJiri Slaby
Don't report about the driver when loaded. It's unneeded and frowned upon nowadays. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove tracing printsJiri Slaby
Remove debug printouts upon function enter/exit. This can be achieved better by tracing. Remove also the one protected by DEBUG_HARD which is not defined anyway. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unused uart_pmac_port::termios_cacheJiri Slaby
struct uart_pmac_port contains termios_cache. It is only written and never read. Remove it as it only occupies space. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: pmac_zilog: remove unfinished DBDMA supportJiri Slaby
The support for DBDMA was never completed. Remove the the code that only maps spaces without real work. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075653.31356-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19serial: amba-pl011: move header content to .cJiri Slaby
There is no point keeping the header content separated. In this case, it is only an enum. So move the enum to the appropriate source file. Cc: Russell King <linux@armlinux.org.uk> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220519075720.31402-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19tty: n_gsm: Fix packet data hex dump outputTony Lindgren
The module param debug for n_gsm uses KERN_INFO level, but the hexdump now uses KERN_DEBUG level. This started after commit 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds"). We now use dynamic_hex_dump() unless DEBUG is set. This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls print_hex_dump() with KERN_INFO to match what n_gsm is doing with the other debug related output. Fixes: 091cb0994edd ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds") Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: dwc3: core: Add error log when core soft reset failedMayank Rana
DWC3 controller soft reset is important operation for USB functionality. In case when it fails, currently there is no failure log. Hence add error log when core soft reset failed. Signed-off-by: Mayank Rana <quic_mrana@quicinc.com> Link: https://lore.kernel.org/r/1652897572-14461-1-git-send-email-quic_mrana@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: dwc3: gadget: Move null pinter check to proper placeAlbert Wang
When dwc3_gadget_ep_cleanup_completed_requests() called to dwc3_gadget_giveback() where the dwc3 lock is released, other thread is able to execute. In this situation, usb_ep_disable() gets the chance to clear endpoint descriptor pointer which leds to the null pointer dereference problem. So needs to move the null pointer check to a proper place. Example call stack: Thread#1: dwc3_thread_interrupt() spin_lock -> dwc3_process_event_buf() -> dwc3_process_event_entry() -> dwc3_endpoint_interrupt() -> dwc3_gadget_endpoint_trbs_complete() -> dwc3_gadget_ep_cleanup_completed_requests() ... -> dwc3_giveback() spin_unlock Thread#2 executes Thread#2: configfs_composite_disconnect() -> __composite_disconnect() -> ffs_func_disable() -> ffs_func_set_alt() -> ffs_func_eps_disable() -> usb_ep_disable() wait for dwc3 spin_lock Thread#1 released lock clear endpoint.desc Fixes: 26288448120b ("usb: dwc3: gadget: Fix null pointer exception") Cc: stable <stable@kernel.org> Signed-off-by: Albert Wang <albertccwang@google.com> Link: https://lore.kernel.org/r/20220518061315.3359198-1-albertccwang@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: hub: Simplify error and success path in port_over_current_notifyBhuvanesh Surachari
kasprintf() returns NULL or valid pointer. Since kfree() can handle NULL pointer condition, simplify error and success paths in function port_over_current_notify() by removing multiple error path labels. Signed-off-by: Bhuvanesh Surachari <Bhuvanesh_Surachari@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/1652369834-4480-1-git-send-email-erosca@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: cdns3: allocate TX FIFO size according to composite EP numberFrank Li
Some devices have USB compositions which may require multiple endpoints. To get better performance, need bigger CDNS3_EP_BUF_SIZE. But bigger CDNS3_EP_BUF_SIZE may exceed total hardware FIFO size when multiple endpoints. By introducing the check_config() callback, calculate CDNS3_EP_BUF_SIZE. Move CDNS3_EP_BUF_SIZE into cnds3_device: ep_buf_size Combine CDNS3_EP_ISO_SS_BURST and CDNS3_EP_ISO_HS_MULT into cnds3_device:ep_iso_burst Using a simple algorithm to calculate ep_buf_size. ep_buf_size = ep_iso_burst = (onchip_buffers - 2k) / (number of IN EP + 1). Test at 8qxp: Gadget ep_buf_size RNDIS: 5 RNDIS+ACM: 3 Mass Storage + NCM + ACM 2 Previous CDNS3_EP_BUF_SIZE is 4, RNDIS + ACM will be failure because exceed FIFO memory. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20220509164055.1815081-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: dwc3: Fix ep0 handling when getting reset while doing control transferMayank Rana
According to the databook ep0 should be in setup phase during reset. If host issues reset between control transfers, ep0 will be in an invalid state. Fix this by issuing stall and restart on ep0 if it is not in setup phase. Also SW needs to complete pending control transfer and setup core for next setup stage as per data book. Hence check ep0 state during reset interrupt handling and make sure active transfers on ep0 out/in endpoint are stopped by queuing ENDXFER command for that endpoint and restart ep0 out again to receive next setup packet. Signed-off-by: Mayank Rana <quic_mrana@quicinc.com> Link: https://lore.kernel.org/r/1651693001-29891-1-git-send-email-quic_mrana@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: Probe EHCI, OHCI controllers asynchronouslyDmitry Torokhov
initcall_debug shows that OHCI controllers take ~60ms to probe on Rockchip RK3399 systems: probe of fe3a0000.usb returned 1 after 58941 usecs A few of these can add up to waste non-trivial amounts of time at boot. These host controllers don't provide resources to other drivers, so this shouldn't contribute to exposing race conditions. Chrome OS kernels have carried this patch on some systems for a while without issues. Similar patches have been merged for a variety of (e)MMC host controllers for similar reasons. [Brian: rewrote commit message, refreshed, but retained dtor's original authorship ] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220518150150.1.Ie8ea0e945a9c15066237014be219eed60066d493@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19usb: isp1760: Fix out-of-bounds array accessLinus Walleij
Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on. Fixes: 1da9e1c06873 ("usb: isp1760: move to regmap for register access") Cc: stable@vger.kernel.org Cc: Rui Miguel Silva <rui.silva@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220516091424.391209-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19xhci: Don't defer primary roothub registration if there is only one roothubMathias Nyman
The support for xHCI controllers with only one roothub, and the code to defer primary roothub registation until second roothub got merged to usb-next for 5.19 at the same time. commit 873f323618c2 ("xhci: prepare for operation w/o shared hcd") commit b7a4f9b5d0e4 ("xhci: Set HCD flag to defer primary roothub registration") These got merged in such a way that the flag to defer primary roothub registration is set even for xHC controllers with just one roothub. Fix this by setting the defer flag in a codepath taken only if we have two roothubs Fixes: 873f323618c2 ("xhci: prepare for operation w/o shared hcd") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220516094850.19788-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19Merge tag 'pinctrl-v5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix an altmode in the Ocelot driver - Fix the IES control pins in the Mediatek MT8365 driver - Sunxi (AMLogic) driver: - Fix the UART2 function pin assignments - Fix the signal name of the PA2 SPI pin * tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin pinctrl: sunxi: fix f1c100s uart2 function pinctrl: mediatek: mt8365: fix IES control pins pinctrl: ocelot: Fix for lan966x alt mode
2022-05-19Merge tag 'thunderbolt-for-v5.19-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.19 merge window This includes following Thunderbolt/USB4 changes for the v5.19 merge window: * Improvements for Thunderbolt 1 DisplayPort tunneling * Link USB4 ports to their USB Type-C connectors * Lane bonding support for host-to-host (XDomain) connections * Buffer allocation improvement for devices with no DisplayPort adapters * Few cleanups and minor fixes. All these have been in linux-next with no reported issues except that there is a minor merge conflict with the kunit-next tree because one of the commits touches the driver KUnit tests. * tag 'thunderbolt-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add KUnit test for devices with no DisplayPort adapters thunderbolt: Fix buffer allocation of devices with no DisplayPort adapters thunderbolt: Add support for XDomain lane bonding thunderbolt: Ignore port locked error in tb_port_wait_for_link_width() thunderbolt: Split setting link width and lane bonding into own functions thunderbolt: Move tb_port_state() prototype to correct place thunderbolt: Add debug logging when lane is enabled/disabled thunderbolt: Link USB4 ports to their USB Type-C connectors misc/mei: Add NULL check to component match callback functions thunderbolt: Use different lane for second DisplayPort tunnel thunderbolt: Dump path config space entries during discovery thunderbolt: Use decimal number with port numbers thunderbolt: Fix typo in comment thunderbolt: Replace usage of found with dedicated list iterator variable
2022-05-19cxl/port: Reuse 'struct cxl_hdm' context for hdm initDan Williams
The port driver maps component registers for port operations. Reuse that mapping for HDM Decoder Capability setup / enable. Move devm_cxl_setup_hdm() before cxl_hdm_decode_init() and plumb @cxlhdm through the hdm init helpers. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291691712.1426646.14336397551571515480.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/port: Move endpoint HDM Decoder Capability init to port driverDan Williams
The responsibility for establishing HDM Decoder Capability based operation is more closely tied to port enabling than memdev enabling which is concerned with port enumeration. This later enables reusing @cxlhdm for probing / controlling "global enable" for the HDM Decoder Capability. For now, just do the nominal move. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291691167.1426646.7936109077255288258.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/pci: Drop @info argument to cxl_hdm_decode_init()Dan Williams
Now that nothing external to cxl_hdm_decode_init() considers 'struct cxl_endpoint_dvec_info' move it internal to cxl_hdm_decode_init(). Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291690612.1426646.7866084245521113414.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()Dan Williams
In preparation for changing how the driver handles 'mem_enable' in the CXL DVSEC control register. Merge the contents of cxl_hdm_decode_init() into cxl_dvsec_ranges() and rename the combined function cxl_hdm_decode_init(). The possible cleanups and fixes that result from this merge are saved for a follow-on change. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/165291690027.1426646.10249756632415633752.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Skip range enumeration if mem_enable clearDan Williams
When a device does not have mem_enable set then the current range settings are moot. Skip the enumeration and cause cxl_hdm_decode_init() to proceed directly to enable the HDM Decoder Capability. Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291689442.1426646.18012291761753694336.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Consolidate CXL DVSEC Range enumeration in the coreDan Williams
In preparation for fixing the setting of the 'mem_enabled' bit in CXL DVSEC Control register, move all CXL DVSEC range enumeration into the same source file. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291688886.1426646.15046138604010482084.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/pci: Move cxl_await_media_ready() to the coreDan Williams
Allow cxl_await_media_ready() to be mocked for testing purposes rather than carrying the maintenance burden of an indirect function call in the mainline driver. With the move cxl_await_media_ready() can no longer reuse the mailbox timeout override, so add a media_ready_timeout module parameter to the core to backfill. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291688340.1426646.4755627801983775011.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Validate port connectivity before dvsec rangesDan Williams
In preparation for validating DVSEC ranges against the platform declared CXL memory ranges (ACPI CFMWS) move port enumeration before the endpoint's decoder validation. Ultimately this logic will move to the port driver, but create a bisect point before that larger move. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291687749.1426646.18091538443879226995.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Fix cxl_mem_probe() error exitDan Williams
The addition of cxl_mem_active() broke error exit scenarios for cxl_mem_probe(). Return early rather than proceed with disabling suspend, and update the label name since it is no longer a terminal "out" label that exits the function. Fixes: 9ea4dcf49878 ("PM: CXL: Disable suspend") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291687176.1426646.15449254938752532784.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()Dan Williams
A check mem_info_valid already happens in __cxl_dvsec_ranges(). Rely on that instead of calling wait_for_valid again. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291686632.1426646.7479581732894574486.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()Dan Williams
Now that wait_for_media() does nothing supplemental to wait_for_media_ready() just promote wait_for_media_ready() to a common helper and drop wait_for_media(). Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291686046.1426646.4390664747934592185.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19cxl/mem: Drop mem_enabled check from wait_for_media()Dan Williams
Media ready is asserted by the device independent of whether mem_enabled was ever set. Drop this check to allow for dropping wait_for_media() in favor of ->wait_media_ready(). Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165291685501.1426646.10372821863672431074.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-19Merge tag 'net-5.18-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm and netfilter subtrees. Notably this reverts a recent TCP/DCCP netns-related change to address a possible UaF. Current release - regressions: - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()" - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdown Previous releases - regressions: - netfilter: flowtable: fix TCP flow teardown - can: revert "can: m_can: pci: use custom bit timings for Elkhart Lake" - xfrm: check encryption module availability consistency - eth: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf() - eth: mlx5: initialize flow steering during driver probe - eth: ice: fix crash when writing timestamp on RX rings Previous releases - always broken: - mptcp: fix checksum byte order - eth: lan966x: fix assignment of the MAC address - eth: mlx5: remove HW-GRO from reported features - eth: ftgmac100: disable hardware checksum on AST2600" * tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) net: bridge: Clear offload_fwd_mark when passing frame up bridge interface. ptp: ocp: change sysfs attr group handling selftests: forwarding: fix missing backslash netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown net: ftgmac100: Disable hardware checksum on AST2600 igb: skip phy status check where unavailable nfc: pn533: Fix buggy cleanup order mptcp: Do TCP fallback on early DSS checksum failure mptcp: fix checksum byte order net: af_key: check encryption module availability consistency net: af_key: add check for pfkey_broadcast in function pfkey_process net/mlx5: Drain fw_reset when removing device net/mlx5e: CT: Fix setting flow_source for smfs ct tuples net/mlx5e: CT: Fix support for GRE tuples net/mlx5e: Remove HW-GRO from reported features net/mlx5e: Properly block HW GRO when XDP is enabled net/mlx5e: Properly block LRO when XDP is enabled net/mlx5e: Block rx-gro-hw feature in switchdev mode ...
2022-05-19staging: r8188eu: delete rtw_wx_read/write32()Dan Carpenter
These debugging tools let you call: status = usb_control_msg_recv/send(udev, 0, REALTEK_USB_VENQT_CMD_REQ, REALTEK_USB_VENQT_READ/WRITE, value, REALTEK_USB_VENQT_CMD_IDX, io_buf, size, RTW_USB_CONTROL_MSG_TIMEOUT, GFP_KERNEL); with a user controlled "value" in the 0-0xffff range. It's not a valid API. Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YoXS4OaD1oauPvmj@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: r8188eu: Remove multiple assignmentsSoumya Negi
Conform to Linux coding style. Issue found by checkpatch:- CHECK: multiple assignments should be avoided Signed-off-by: Soumya Negi <soumya.negi97@gmail.com> Link: https://lore.kernel.org/r/20220519095012.5619-1-soumya.negi97@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: r8188eu: add check for kzallocJiasheng Jiang
As kzalloc() may return null pointer, it should be better to check the return value and return error if fails in order to avoid dereference of null pointer. Moreover, the return value of rtw_alloc_hwxmits() should also be dealt with. Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver") Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220518075957.514603-1-jiasheng@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: r8188eu: fix warnings in rtw_wlan_utilVihas Makwana
Refactor the code to fix following warnings: WARNING: Comparisons should place the constant on the right side of the test CHECK: Comparison to NULL could be written "p" Signed-off-by: Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220517140626.3716-4-makvihas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: r8188eu: fix warnings in rtw_pwrctrlVihas Makwana
Refactor the code to fix following warnings: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by: Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220517140626.3716-3-makvihas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: r8188eu: fix warnings in rtw_p2pVihas Makwana
Refactor the code to fix following warning: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by: Vihas Makwana <makvihas@gmail.com> Link: https://lore.kernel.org/r/20220517140626.3716-2-makvihas@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: rtl8712: fix uninit-value in r871xu_drv_init()Wang Cheng
When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5358 [inline] hub_port_connect_change drivers/usb/core/hub.c:5502 [inline] port_event drivers/usb/core/hub.c:5660 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454 kthread+0x3c7/0x500 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 Local variable mac created at: r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com> Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wang Cheng <wanngchenng@gmail.com> Link: https://lore.kernel.org/r/14c3886173dfa4597f0704547c414cfdbcd11d16.1652618244.git.wanngchenng@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: rtl8712: fix uninit-value in usb_read8() and friendsWang Cheng
When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline] BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:643 [inline] string+0x4ec/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 va_format lib/vsprintf.c:1704 [inline] pointer+0x18e6/0x1f70 lib/vsprintf.c:2443 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615 __dev_printk+0x3be/0x440 drivers/base/core.c:4627 _dev_info+0x1ea/0x22f drivers/base/core.c:4673 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5363 [inline] hub_port_connect_change drivers/usb/core/hub.c:5507 [inline] port_event drivers/usb/core/hub.c:5665 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436 kthread+0x3c7/0x500 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Local variable data created at: usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 Reported-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com> Tested-by: <syzbot+6f5ecd144854c0d8580b@syzkaller.appspotmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wang Cheng <wanngchenng@gmail.com> Link: https://lore.kernel.org/r/b9b7a6ee02c02aa28054f5cf16129977775f3cd9.1652618244.git.wanngchenng@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()Wang Cheng
When 'status' returned from usb_control_msg() is not equal to 'len', that usb_control_msg() is on partial failure, r8712_usbctrl_vendorreq() will treat partial reads as success. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wang Cheng <wanngchenng@gmail.com> Link: https://lore.kernel.org/r/e33ea53d36c422fbe7eabec5bd9eecb0ebce1bc5.1652618244.git.wanngchenng@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 09:13:11 +0000