| Age | Commit message (Collapse) | Author |
|---|
|
ZSMALLOC depends on MMU so ZRAM should also depend on MMU since 'select'
does not follow any dependency chains.
Fixes this Kconfig warning:
WARNING: unmet direct dependencies detected for ZSMALLOC
Depends on [n]: MMU [=n]
Selected by [y]:
- ZRAM [=y] && BLK_DEV [=y] && BLOCK [=y] && SYSFS [=y] && (CRYPTO_LZO [=y] || CRYPTO_ZSTD [=m] || CRYPTO_LZ4 [=m] || CRYPTO_LZ4HC [=n] || CRYPTO_842 [=n])
Link: https://lkml.kernel.org/r/20220522204027.22964-1-rdunlap@infradead.org
Fixes: b3fbd58fcbb10 ("mm: Kconfig: simplify zswap configuration")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Offload writing printk() messages on consoles to per-console
kthreads.
It prevents soft-lockups when an extensive amount of messages is
printed. It was observed, for example, during boot of large systems
with a lot of peripherals like disks or network interfaces.
It prevents live-lockups that were observed, for example, when
messages about allocation failures were reported and a CPU handled
consoles instead of reclaiming the memory. It was hard to solve even
with rate limiting because it would need to take into account the
amount of messages and the speed of all consoles.
It is a must to have for real time. Otherwise, any printk() might
break latency guarantees.
The per-console kthreads allow to handle each console on its own
speed. Slow consoles do not longer slow down faster ones. And
printk() does not longer unpredictably slows down various code paths.
There are situations when the kthreads are either not available or
not reliable, for example, early boot, suspend, or panic. In these
situations, printk() uses the legacy mode and tries to handle
consoles immediately.
- Add documentation for the printk index.
* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk, tracing: fix console tracepoint
printk: remove @console_locked
printk: extend console_lock for per-console locking
printk: add kthread console printers
printk: add functions to prefer direct printing
printk: add pr_flush()
printk: move buffer definitions into console_emit_next_record() caller
printk: refactor and rework printing logic
printk: add con_printk() macro for console details
printk: call boot_delay_msec() in printk_delay()
printk: get caller_id/timestamp after migration disable
printk: wake waiters for safe and NMI contexts
printk: wake up all waiters
printk: add missing memory barrier to wake_up_klogd()
printk: cpu sync always disable interrupts
printk: rename cpulock functions
printk/index: Printk index feature documentation
MAINTAINERS: Add printk indexing maintainers on mention of printk_index
|
|
Add Meteor Lake PCI ID for processor thermal device.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add Meteor Lake ACPI IDs for DPTF devices.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP (Operating Performance Points) updates for 5.19-rc1 from Viresh
Kumar:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* tag 'opp-updates-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.19-rc1 from Viresh Kumar:
- Tegra234 cpufreq support (Sumit Gupta).
- Mediatek cleanups and enhancements (Wan Jiabing, Rex-BC Chen, and
Jia-Wei Chang).
* tag 'cpufreq-arm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (21 commits)
cpufreq: mediatek: Add support for MT8186
cpufreq: mediatek: Link CCI device to CPU
dt-bindings: cpufreq: mediatek: Add MediaTek CCI property
cpufreq: mediatek: Fix potential deadlock problem in mtk_cpufreq_set_target
cpufreq: mediatek: Add opp notification support
cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()
cpufreq: mediatek: Move voltage limits to platform data
cpufreq: mediatek: Unregister platform device on exit
cpufreq: mediatek: Fix NULL pointer dereference in mediatek-cpufreq
cpufreq: mediatek: Make sram regulator optional
cpufreq: mediatek: Record previous target vproc value
cpufreq: mediatek: Replace old_* with pre_*
cpufreq: mediatek: Use device print to show logs
cpufreq: mediatek: Enable clocks and regulators
cpufreq: mediatek: Remove unused headers
cpufreq: mediatek: Cleanup variables and error handling in mtk_cpu_dvfs_info_init()
cpufreq: mediatek: Use module_init and add module_exit
arm64: tegra: add node for tegra234 cpufreq
cpufreq: tegra194: Add support for Tegra234
cpufreq: tegra194: add soc data to support multiple soc
...
|
|
|
|
cppcheck reports
[drivers/video/fbdev/xen-fbfront.c:226]: (style) Assignment of function parameter has no effect outside the function.
The value parameter 'transp' is not used, so setting it can be removed.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix and feature for 5.19
- ultravisor communication device driver
- fix TEID on terminating storage key ops
|
|
For a while now it's been allowed for a MMU context to outlive it's
corresponding panfrost_priv, however the job structure still references
panfrost_priv to get hold of the MMU context. If panfrost_priv has been
freed this is a use-after-free which I've been able to trigger resulting
in a splat.
To fix this, drop the reference to panfrost_priv in the job structure
and add a direct reference to the MMU structure which is what's actually
needed.
Fixes: 7fdc48cc63a3 ("drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv")
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519152003.81081-1-steven.price@arm.com
|
|
The irqchip ops are called with a raw spinlock held, so the subsequent
regmap usage cannot use a plain spinlock.
spi-hid-apple-of spi0.0: spihid_apple_of_probe:74
=============================
[ BUG: Invalid wait context ]
5.18.0-asahi-00176-g0fa3ab03bdea #1337 Not tainted
-----------------------------
kworker/u20:3/86 is trying to lock:
ffff8000166b5018 (pinctrl_apple_gpio:462:(®map_config)->lock){....}-{3:3}, at: regmap_lock_spinlock+0x18/0x30
other info that might help us debug this:
context-{5:5}
7 locks held by kworker/u20:3/86:
#0: ffff800017725d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670
#1: ffff80001e33bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670
#2: ffff800017d629a0 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c
#3: ffff80002414e618 (&ctlr->add_lock){+.+.}-{4:4}, at: spi_add_device+0x40/0x80
#4: ffff800024116990 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c
#5: ffff800022d4be58 (request_class){+.+.}-{4:4}, at: __setup_irq+0xa8/0x720
#6: ffff800022d4bcc8 (lock_class){....}-{2:2}, at: __setup_irq+0xcc/0x720
Fixes: a0f160ffcb83 ("pinctrl: add pinctrl/GPIO driver for Apple SoCs")
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220524142206.18833-1-marcan@marcan.st
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
* clk-qcom:
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: qcom: rcg2: Cache CFG register updates for parked RCGs
clk: qcom: add sc8280xp GCC driver
dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings
clk: qcom: gcc-msm8976: Add modem reset
dt-bindings: clk: qcom: gcc-msm8976: Add modem reset
clk: qcom: gcc-msm8976: Set floor ops for SDCC
dt-bindings: clock: qcom,gcc-apq8064: Fix typo in compatible and split apq8084
clk: qcom: smd: Update MSM8976 RPM clocks.
clk: qcom: gcc-msm8998: add SSC-related clocks
dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks
dt-bindings: clock: qcom,rpmcc: add clocks property
dt-bindings: clock: qcom,rpmcc: convert to dtschema
clk: qcom: lpass: Add support for LPASS clock controller for SC7280
dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280
clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks
clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks
clk: qcom: regmap-mux: add pipe clk implementation
|
|
and 'clk-stm' into clk-next
- Mark some clks critical on Ingenic X1000
- Add STM32MP13 RCC driver (Reset Clock Controller)
* clk-rockchip:
dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML
dt-bindings: clock: convert rockchip,px30-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML
dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML
dt-binding: clock: Add missing rk3568 cru bindings
clk: rockchip: Mark hclk_vo as critical on rk3568
dt-bindings: clock: fix rk3399 cru clock issues
dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml
dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml
dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml
* clk-ingenic:
clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs
mips: ingenic: Do not manually reference the CPU clock
clk: ingenic: Mark critical clocks in Ingenic SoCs
clk: ingenic: Allow specifying common clock flags
* clk-bindings:
dt-bindings: clock: Replace common binding with link to schema
* clk-samsung:
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: samsung: exynosautov9: add cmu_peric1 clock support
clk: samsung: exynosautov9: add cmu_peric0 clock support
clk: samsung: exynosautov9: add cmu_fsys2 clock support
clk: samsung: exynosautov9: add cmu_busmc clock support
clk: samsung: exynosautov9: add cmu_peris clock support
clk: samsung: exynosautov9: add cmu_core clock support
clk: samsung: add top clock support for Exynos Auto v9 SoC
dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings
dt-bindings: clock: add clock binding definitions for Exynos Auto v9
* clk-stm:
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
|
|
'clk-imx' into clk-next
- Convert ux500 to clk_hw
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- MediaTek MT8186 SoC clk support
- Move MediaTek driver to clk_hw provider APIs
* clk-ux500:
clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base()
clk: ux500: Implement the missing CLKOUT clocks
clk: ux500: Rewrite PRCMU clocks to use clk_hw_*
clk: ux500: Drop .is_prepared state from PRCMU clocks
clk: ux500: Drop .is_enabled state from PRCMU clocks
dt-bindings: clock: u8500: Add clkout clock bindings
* clk-mtk: (22 commits)
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
clk: mediatek: Replace 'struct clk' with 'struct clk_hw'
clk: mediatek: apmixed: Drop error message from clk_register() failure
clk: mediatek: Make mtk_clk_register_composite() static
clk: mediatek: use en_mask as a pure div_en_mask
clk: mediatek: update compatible string for MT7986 ethsys
clk: mediatek: Add MT8186 ipesys clock support
clk: mediatek: Add MT8186 mdpsys clock support
clk: mediatek: Add MT8186 camsys clock support
clk: mediatek: Add MT8186 vencsys clock support
clk: mediatek: Add MT8186 vdecsys clock support
clk: mediatek: Add MT8186 imgsys clock support
clk: mediatek: Add MT8186 wpesys clock support
clk: mediatek: Add MT8186 mmsys clock support
clk: mediatek: Add MT8186 mfgsys clock support
clk: mediatek: Add MT8186 imp i2c wrapper clock support
clk: mediatek: Add MT8186 apmixedsys clock support
clk: mediatek: Add MT8186 infrastructure clock support
clk: mediatek: Add MT8186 topckgen clock support
...
* clk-tegra:
clk: tegra: Update kerneldoc to match prototypes
clk: tegra: Replace .round_rate() with .determine_rate()
clk: tegra: Register clocks from root to leaf
clk: tegra: Add missing reset deassertion
* clk-allwinner:
clk: sunxi-ng: h616: Add PLL derived 32KHz clock
clk: sunxi-ng: h6-r: Add RTC gate clock
* clk-imx:
clk: imx8mp: fix usb_root_clk parent
clk: imx8mp: add clkout1/2 support
clk: imx: scu: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
clk: imx8mp: Add DISP2 pixel clock
clk: imx: scu: fix a potential memory leak in __imx_clk_gpr_scu()
clk: imx: Add check for kcalloc
clk: imx8mn: add GPT support
dt-bindings: imx: add clock bindings for i.MX8MN GPT
clk: imx: Remove the snvs clock
clk: imx8m: check mcore_booted before register clk
clk: imx: add mcore_booted module paratemter
clk: imx8mq: add 27m phy pll ref clock
|
|
'clk-renesas' into clk-next
- Airoha EN7523 SoC system clocks
- Use i2c driver probe_new to avoid id scans
* clk-ti:
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk
dt-bindings: clock: ehrpwm: Add AM62 specific compatible
* clk-cleanup:
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: fixed-rate: Remove redundant if statement
clk: mux: remove redundant initialization of variable width
clk: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
clk: actions: remove redundant assignment after a mask operation
* clk-airoha:
clk: en7523: fix wrong pointer check in en7523_clk_probe()
clk: en7523: Add clock driver for Airoha EN7523 SoC
dt-bindings: Add en7523-scu device tree binding documentation
* clk-i2c-simple:
clk: renesas-pcie: use simple i2c probe function
clk: si570: use i2c_match_id and simple i2c probe
clk: si544: use i2c_match_id and simple i2c probe
clk: si5351: use i2c_match_id and simple i2c probe
clk: si5341: use simple i2c probe function
clk: si514: use simple i2c probe function
clk: max9485: use simple i2c probe function
clk: cs2000-cp: use simple i2c probe function
clk: cdce925: use i2c_match_id and simple i2c probe
clk: cdce706: use simple i2c probe function
* clk-renesas: (48 commits)
clk: renesas: r9a09g011: Add eth clock and reset entries
clk: renesas: Add RZ/V2M support using the rzg2l driver
clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg
clk: renesas: rzg2l: Make use of CLK_MON registers optional
clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers
clk: renesas: rzg2l: Add read only versions of the clk macros
clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro
dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC
clk: renesas: r9a07g044: Fix OSTM1 module clock name
clk: renesas: r9a07g043: Add clock and reset entries for ADC
clk: renesas: r9a07g043: Add TSU clock and reset entry
clk: renesas: r9a07g043: Add RSPI clock and reset entries
clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller
clk: renesas: r9a07g044: Add DSI clock and reset entries
clk: renesas: r9a07g044: Add LCDC clock and reset entries
clk: renesas: r9a07g044: Add M4 Clock support
clk: renesas: r9a07g044: Add M3 Clock support
clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support
clk: renesas: r9a07g044: Add M1 clock support
clk: renesas: rzg2l: Add DSI divider clk support
...
|
|
Pull page cache updates from Matthew Wilcox:
- Appoint myself page cache maintainer
- Fix how scsicam uses the page cache
- Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS
- Remove the AOP flags entirely
- Remove pagecache_write_begin() and pagecache_write_end()
- Documentation updates
- Convert several address_space operations to use folios:
- is_dirty_writeback
- readpage becomes read_folio
- releasepage becomes release_folio
- freepage becomes free_folio
- Change filler_t to require a struct file pointer be the first
argument like ->read_folio
* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
nilfs2: Fix some kernel-doc comments
Appoint myself page cache maintainer
fs: Remove aops->freepage
secretmem: Convert to free_folio
nfs: Convert to free_folio
orangefs: Convert to free_folio
fs: Add free_folio address space operation
fs: Convert drop_buffers() to use a folio
fs: Change try_to_free_buffers() to take a folio
jbd2: Convert release_buffer_page() to use a folio
jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
reiserfs: Convert release_buffer_page() to use a folio
fs: Remove last vestiges of releasepage
ubifs: Convert to release_folio
reiserfs: Convert to release_folio
orangefs: Convert to release_folio
ocfs2: Convert to release_folio
nilfs2: Remove comment about releasepage
nfs: Convert to release_folio
jfs: Convert to release_folio
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v5.19 merge window:
- Build, sparse, UB, and CFI fixes
- Variable scope fix
- Audio pipe logging fix
- ICL+ DSI NULL dereference fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sfozuj44.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- dvb-usb drivers entries got reworked to avoid usage of magic numbers
to refer to data position inside tables
- vcodec driver has gained support for MT8186 and for vp8 and vp9
stateless codecs
- hantro has gained support for Hantro G1 on RK366x
- Added more h264 levels on coda960
- ccs gained support for MIPI CSI-2 28 bits per pixel raw data type
- venus driver gained support for Qualcomm custom compressed pixel
formats
- lots of driver fixes and updates
* tag 'media/v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: hantro: Enable HOLD_CAPTURE_BUF for H.264
media: hantro: Add H.264 field decoding support
media: hantro: h264: Make dpb entry management more robust
media: hantro: Stop using H.264 parameter pic_num
media: rkvdec: Enable capture buffer holding for H264
media: rkvdec-h264: Add field decoding support
media: rkvdec: Ensure decoded resolution fit coded resolution
media: rkvdec: h264: Fix reference frame_num wrap for second field
media: rkvdec: h264: Validate and use pic width and height in mbs
media: rkvdec: Move H264 SPS validation in rkvdec-h264
media: rkvdec: h264: Fix bit depth wrap in pps packet
media: rkvdec: h264: Fix dpb_valid implementation
media: rkvdec: Stop overclocking the decoder
media: v4l2: Reorder field reflist
media: h264: Sort p/b reflist using frame_num
media: v4l2: Trace calculated p/b0/b1 initial reflist
media: h264: Store all fields into the unordered list
media: h264: Store current picture fields
media: h264: Increase reference lists size to 32
media: h264: Use v4l2_h264_reference for reflist
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly extend the device property API and make it easier to use
in some cases.
Specifics:
- Allow error pointer to be passed to fwnode APIs (Andy Shevchenko).
- Introduce fwnode_for_each_parent_node() (Andy Shevchenko, Douglas
Anderson).
- Advertise fwnode and device property count API calls (Andy
Shevchenko).
- Clean up fwnode_is_ancestor_of() (Andy Shevchenko).
- Convert device_{dma_supported,get_dma_attr} to fwnode (Sakari
Ailus).
- Release subnode properties with data nodes (Sakari Ailus).
- Add ->iomap() and ->irq_get() to fwnode operations (Sakari Ailus)"
* tag 'devprop-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Advertise fwnode and device property count API calls
device property: Fix recent breakage of fwnode_get_next_parent_dev()
device property: Drop 'test' prefix in parameters of fwnode_is_ancestor_of()
device property: Introduce fwnode_for_each_parent_node()
device property: Allow error pointer to be passed to fwnode APIs
ACPI: property: Release subnode properties with data nodes
device property: Add irq_get to fwnode operation
device property: Add iomap to fwnode operations
ACPI: property: Move acpi_fwnode_device_get_match_data() up
device property: Convert device_{dma_supported,get_dma_attr} to fwnode
|
|
The calculation in ->set_offset() handles both negative and positive
offsets. The 'steps' variable will be checked to be in a specific [-x;
+x] range, which means it must be a signed integer rather than
unsigned.
This also fixes the following smatch warning:
warn: 'steps' 'true' implies 'steps > 0' is 'true'
Fixes: be4a11cf98af ("rtc: rzn1: Add oscillator offset support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220520082500.489248-1-miquel.raynal@bootlin.com
|
|
There is a copy and paste error so this code returns the wrong variable.
Fixes: deeb4b5393e1 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YoZMg1dmHHSJEfE9@kili
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
|
|
In the ->set_offset() callback, the 'val' variable is used for two
different purposes at the same time, which is oviously wrong:
- It contains the intermediate value of the SUBU register that must be
written at the end of ->set_offset().
- It is used in the middle of the above calculations to poll the CTL2
register for a specific value.
Let's introduce a 'ctl2' variable just for the readl_poll_timeout()
call and use it there in place of 'var'.
In order to avoid mixing those two variables again, let's rename the
remaining occurences of 'val' into 'subu' and initialize it to 0 to
avoid the uninitialized variable situation reported by Tom Rix and Colin
Ian King already.
Fixes: be4a11cf98af ("rtc: rzn1: Add oscillator offset support")
Reported-by: Tom Rix <trix@redhat.com>
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220520082221.488849-1-miquel.raynal@bootlin.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for pens with 3 buttons with Wacom driver (Joshua Dickens)
- support for HID_DG_SCANTIME to report the timestamp for pen and touch
events in Wacom driver (Joshua Dickens)
- support for sensor discovery in amd-sfh driver (Basavaraj Natikar)
- support for wider variety of Huion tablets ported from DIGImend
project (José Expósito, Nikolai Kondrashov)
- new device IDs and other assorted small code cleanups
* tag 'for-linus-2022052401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (44 commits)
HID: apple: Properly handle function keys on Keychron keyboards
HID: uclogic: Switch to Digitizer usage for styluses
HID: uclogic: Add pen support for XP-PEN Star 06
HID: uclogic: Differentiate touch ring and touch strip
HID: uclogic: Always shift touch reports to zero
HID: uclogic: Do not focus on touch ring only
HID: uclogic: Return raw parameters from v2 pen init
HID: uclogic: Move param printing to a function
HID: core: Display "SENSOR HUB" for sensor hub bus string in hid_info
HID: amd_sfh: Move bus declaration outside of amd-sfh
HID: amd_sfh: Add physical location to HID device
HID: amd_sfh: Modify the hid name
HID: amd_sfh: Modify the bus name
HID: amd_sfh: Add sensor name by index for debug info
HID: amd_sfh: Add support for sensor discovery
HID: bigben: fix slab-out-of-bounds Write in bigben_probe
Hid: wacom: Fix kernel test robot warning
HID: uclogic: Disable pen usage for Huion keyboard interfaces
HID: uclogic: Support disabling pen usage
HID: uclogic: Pass keyboard reports as is
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release but some new drivers mean that the
diffstat is fairly large. The new drivers include the aspeed driver
which is migrated from MTD as part of the ongoing move of controllers
with specialised support for SPI flashes into the SPI subsystem.
- Support for devices which flip CPHA during recieve only transfers
(eg, if MOSI and MISO have inverted polarity).
- Overhaul of the i.MX driver, including the addition of PIO support
for better performance on small transfers.
- Migration of the Aspeed driver from MTD.
- Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek
IPM and SFI"
* tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits)
spi: spi-au1550: replace ternary operator with min()
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
spi: aspeed: Calibrate read timings
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Add support for direct mapping
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: Convert the Aspeed SMC controllers device tree binding
spi: spi-cadence: Update ISR status variable type to irqreturn_t
spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller
spi: cadence-quadspi: Handle spi_unregister_master() in remove()
spi: stm32-qspi: Remove SR_BUSY bit check before sending command
spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
spi: cadence-quadspi: remove unnecessary (void *) casts
spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma()
spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
spi: spi-imx: add PIO polling support
spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is mostly a drivers update including a couple of new drivers but
we do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703"
* tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: scmi: Fix refcount leak in scmi_regulator_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
regulator: qcom_smd: Fix up PM8950 regulator configuration
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
regulator: core: Add error flags to sysfs attributes
regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A
regulator: dt-bindings: qcom,rpmh: document supplies per variant
regulator: dt-bindings: qcom,rpmh: update maintainers
regulator: mt6315: Enforce regulator-compatible, not name
regulator: pca9450: Enable DVS control via PMIC_STBY_REQ
regulator: pca9450: Make warm reset on WDOG_B assertion
regulator: Add property for WDOG_B warm reset
regulator: pca9450: Make I2C Level Translator configurable
regulator: Add property for I2C level shifter
regulator: sm5703: Correct reference to the common regulator schema
regulator: sm5703-regulator: Add regulators support for SM5703 MFD
dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators
regulator: richtek,rt4801: parse GPIOs per regulator
regulator: dt-bindings: richtek,rt4801: use existing ena_gpiod feature
regulator: core: Sleep (not delay) in set_voltage()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main change here is Marek's addition of bulk read/write callbacks
for individual regmaps, we've supported single register operations for
a while but there's enough hardware out there which can use bulk
equivalents to make it worthwhile"
* tag 'regmap-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Add missing map->bus check
regmap: Add bulk read/write callbacks into regmap_config
regmap: cache: set max_register with reg_stride
regmap: Constify static regmap_bus structs
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Support zero-out using TRIM for eMMC
- Allow to override the busy-timeout for the ioctl-cmds
MMC host:
- Continued the conversion of DT bindings into the JSON schema
- jz4740: Apply DMA engine limits to maximum segment size
- mmci_stm32: Use a buffer for unaligned DMA requests
- mmc_spi: Enabled high-speed modes via parsing of DT
- omap: Make clock management to be compliant with CCF
- renesas_sdhi:
- Support eMMC HS400 mode for R-Car V3H ES2.0
- Don't allow support for eMMC HS400 for R-Car V3M/D3
- sdhci_am654: Fix problem when SD card slot lacks the card detect
line
- sdhci-esdhc-imx: Add support for the imx8dxl variant
- sdhci-brcmstb: Enable support for clock gating to save power
- sdhci-msm:
- Add support for the sdx65 variant
- Add support for the sm8150 variant
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-pci-gli: Add workaround to allow GL9755 to enter ASPM L1.2"
* tag 'mmc-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: sdhci-of-arasan: Add NULL check for data field
mmc: core: Support zeroout using TRIM for eMMC
mmc: sdhci-brcmstb: Fix compiler warning
mmc: sdhci-msm: Add compatible string check for sdx65
dt-bindings: mmc: sdhci-msm: Document the SDX65 compatible
mmc: sdhci-msm: Add compatible string check for sm8150
dt-bindings: mmc: sdhci-msm: Add compatible string for sm8150
mmc: sdhci-msm: Add SoC specific compatibles
dt-bindings: mmc: sdhci-msm: Convert bindings to yaml
dt-bindings: mmc: brcm,sdhci-brcmstb: cleanup example
dt-bindings: mmc: brcm,sdhci-brcmstb: correct number of reg entries
mmc: sdhci-brcmstb: Enable Clock Gating to save power
mmc: sdhci-brcmstb: Re-organize flags
mmc: mmci: Remove custom ios handler
mmc: atmel-mci: Simplify if(chan) and if(!chan)
mmc: core: use kobj_to_dev()
dt-bindings: mmc: sdhci-of-dwcmhsc: Add rk3588
mmc: core: Add CIDs for cards to the entropy pool
mmc: core: Allows to override the timeout value for ioctl() path
mmc: sdhci-omap: Use of_device_get_match_data() helper
...
|
|
Pull IPMI update from Corey Minyard:
"Add limits on the number of users and messages, plus sysfs interfaces
to control those limits.
Other than that, little cleanups, use dev_xxx() insted of pr_xxx(),
create initializers for structures, fix a refcount leak, etc"
* tag 'for-linus-4.19-1' of https://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix refcount leak in ipmi_ipmb_probe
ipmi: remove unnecessary type castings
ipmi: Make two logs unique
ipmi:si: Convert pr_debug() to dev_dbg()
ipmi: Convert pr_debug() to dev_dbg()
ipmi: Fix pr_fmt to avoid compilation issues
ipmi: Add an intializer for ipmi_recv_msg struct
ipmi: Add an intializer for ipmi_smi_msg struct
ipmi:ssif: Check for NULL msg when handling events and messages
ipmi: use simple i2c probe function
ipmi: Add a sysfs count of total outstanding messages for an interface
ipmi: Add a sysfs interface to view the number of users
ipmi: Limit the number of message a user may have outstanding
ipmi: Add a limit on the number of users that may use IPMI
|
|
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
|
|
- Drop unnecessary "retval" variable, since it's never read (Colin Ian
King)
* remotes/lorenzo/pci/versatile:
PCI: versatile: Remove redundant variable retval
|
|
- Fix bitmap size when searching for free outbound region (Dan Carpenter)
* remotes/lorenzo/pci/rockchip:
PCI: rockchip: Fix find_first_zero_bit() limit
|
|
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for MSM8996/APQ8096
platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding (Dmitry
Baryshkov)
* pci/host/qcom:
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
|
|
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár)
* remotes/lorenzo/pci/power-slot:
PCI: mvebu: Add support for sending Set_Slot_Power_Limit message
PCI: Add function for parsing 'slot-power-limit-milliwatt' DT property
PCI: Add PCI_EXP_SLTCTL_ASPL_DISABLE macro
|
|
- Add missing semicolon after MODULE_DEVICE_TABLE() (Uwe Kleine-König)
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and
mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
* remotes/lorenzo/pci/microchip:
PCI: microchip: Fix potential race in interrupt handling
PCI: microchip: Add missing chained_irq_enter()/exit() calls
PCI: microchip: Add a missing semicolon
|
|
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek-gen3: Assert resets to ensure expected init state
PCI: mediatek: Fix refcount leak in mtk_pcie_subsys_powerup()
|
|
- Fix PERST# start-up sequence (Francesco Dolcini)
* remotes/lorenzo/pci/imx6:
PCI: imx6: Fix PERST# start-up sequence
|
|
- Return error instead of success if DMA mapping of MSI area fails (Jiantao
Zhang)
- Drop tegra194 MSI register save/restore, which is unnecessary since the
DWC core does it (Jisheng Zhang)
- Factor out qcom enable/disable resources code (Dmitry Baryshkov)
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because
it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
* remotes/lorenzo/pci/dwc:
PCI: rockchip-dwc: Add legacy interrupt support
PCI: rockchip-dwc: Reset core at driver probe
dt-bindings: PCI: Remove fallback from Rockchip DesignWare binding
PCI: qcom-ep: Move enable/disable resources code to common functions
PCI: tegra194: Remove unnecessary MSI enable reg save and restore
PCI: dwc: Fix setting error return on MSI DMA mapping failure
|
|
- Fix bitmap size when searching for free outbound region (Dan Carpenter)
- Do device-specific setup to allow PTM Responder to be enabled (Christian
Gmeiner)
- Don't advertise FLR in Device Capabilities register because the
controller incorrectly resets Margining Lane Status and Margining Lane
Control on FLR (Parshuram Thombare)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: cadence: Fix find_first_zero_bit() limit
|
|
- Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() (Yicong
Yang, Jay Zhou)
* pci/virtualization:
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
|
|
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP, since it's
not used otherwise (Krzysztof Kozlowski)
- Power up all devices during runtime resume (Rafael J. Wysocki)
- Resume subordinate bus in bus type callbacks (Rafael J. Wysocki)
- Drop pci_dev runtime_d3cold flag since no uses remain (Rafael J. Wysocki)
- Move power-up to D0 code to pci_power_up() and rename
pci_raw_set_power_state() to pci_set_low_power_state() (Rafael J.
Wysocki)
- Set current_state to D3cold if the device is not accessible (Rafael J.
Wysocki)
- Do not call pci_update_current_state() from pci_power_up() (Rafael J.
Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split part of pci_power_up() off to pci_set_full_power_state() (Rafael J.
Wysocki)
- Do not restore BARs if device is not in D0 (Rafael J. Wysocki)
* pci/pm:
PCI/PM: Replace pci_set_power_state() in pci_pm_thaw_noirq()
PCI/PM: Rearrange pci_set_power_state()
PCI/PM: Clean up pci_set_low_power_state()
PCI/PM: Do not restore BARs if device is not in D0
PCI/PM: Split pci_power_up()
PCI/PM: Write 0 to PMCSR in pci_power_up() in all cases
PCI/PM: Do not call pci_update_current_state() from pci_power_up()
PCI/PM: Unfold pci_platform_power_transition() in pci_power_up()
PCI/PM: Set current_state to D3cold if the device is not accessible
PCI/PM: Relocate pci_set_low_power_state()
PCI/PM: Split pci_raw_set_power_state()
PCI/PM: Rearrange pci_update_current_state()
PCI/PM: Drop the runtime_d3cold device flag
PCI/PM: Resume subordinate bus in bus type callbacks
PCI/PM: Power up all devices during runtime resume
PCI/PM: Define pci_restore_standard_config() only for CONFIG_PM_SLEEP
|
|
- Update pci_p2pdma_whitelist[] checking so we accept Skylake-E Root Ports
even if they're not at devfn 00.0 (Shlomo Pongratz)
* pci/p2pdma:
PCI/P2PDMA: Whitelist Intel Skylake-E Root Ports at any devfn
|
|
- Allow D3 only if Root Port can signal and wake from D3 so we don't miss
hotplug events on AMD Yellow Carp (Mario Limonciello)
- Clean up hotplug include files to enable future powerpc cleanup
(Christophe Leroy)
* pci/hotplug:
PCI: hotplug: Clean up include files
PCI/ACPI: Allow D3 only if Root Port can signal and wake from D3
|
|
- Clear AER "multiple errors" bits to avoid race that left them set forever
(Kuppuswamy Sathyanarayanan)
* pci/error:
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
|
|
Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.
Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5
|
|
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
|
