summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-02-03drm/ast: Find VBIOS mode from regular display sizeThomas Zimmermann
The ast driver looks up supplied display modes from an internal list of display modes supported by the VBIOS. Do not use the crtc_-prefixed display values from struct drm_display_mode for looking up the VBIOS mode. The fields contain raw values that the driver programs to hardware. They are affected by display settings like double-scan or interlace. Instead use the regular vdisplay and hdisplay fields for lookup. As the programmed values can now differ from the values used for lookup, set struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS mode. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de
2025-02-03drm/ast: Always validate H/V sync flagsThomas Zimmermann
The ast driver matches DRM display modes against an internal list of modes supported by the VBIOS. Matching H/V sync flags between modes is preferred, but optional. If sync flags are not matching, the driver would program the VBIOS settings to hardware and let the display handle the difference. DRM modes are generated from attached displays or standard mode lines. Therefore differences to the VBIOS modes are not just cosmetical, but signal possible incompatibility with the display hardware. Hence make matching H/V sync flags mandatory. If the VBIOS does not support a certain mode, we should report it as unsupported. Note that the VBIOS mode tables all appear to refer to standard modes. (If sync flags really make no difference to the VBIOS, the ast driver shouldn't match them in the first place.) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-8-tzimmermann@suse.de
2025-02-03drm/ast: Add support_wuxga flag to struct ast_deviceThomas Zimmermann
Detect support for 1920x1200 (WUXGA) in ast_detect_widescreen(). The flag is cleared by default. The test logic has been taken from existing code in ast_crtc_helper_mode_valid(). The code in that function is being replaced by the new flag. v2: - move shared detection code into helper (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-7-tzimmermann@suse.de
2025-02-03drm/ast: Add support_fullhd flag to struct ast_deviceThomas Zimmermann
Detect support for 1920x1080 (FullHD) in ast_detect_widescreen(). The flag is cleared by default. The test logic has been taken from existing code in ast_crtc_helper_mode_valid(). The code in that function is being replaced by the new flag. For Gen3, a new branch duplicates the Gen2 logic and adds a test for AST2200. Gen2 adds a test for AST2100. v2: - use fullhd flag for setting max width/height Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-6-tzimmermann@suse.de
2025-02-03drm/ast: Reorganize widescreen test around hardware GensThomas Zimmermann
Testing for support of widescreen modes mixes up various hardware Gens. First branch by hardware Gen, then do specific tests for each Gen. By default, widesscreen support is disabled. Later patches will add more specific tests for each Gen. v2: - move shared detection code into helper (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-5-tzimmermann@suse.de
2025-02-03drm/ast: Rename support_wide_screen to support_wsxga_pThomas Zimmermann
The flag support_wide_screen in struct ast_device selects devices that support resolutions of at least 1680x1050 (WSXGA+). Name it accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-4-tzimmermann@suse.de
2025-02-03drm/ast: Align naming in widescreen detection code to manualThomas Zimmermann
Rename variables and register constants to align with the programming manual. Add new constants where necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-3-tzimmermann@suse.de
2025-02-03drm/ast: Remove 1152x864 from list of widescreen resolutionsThomas Zimmermann
The resolution 1152x864 has a ratio of 4:3 and is already handled as such. Remove it from the list of widescreen resolutions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-2-tzimmermann@suse.de
2025-02-03accel/ivpu: Move recovery work to system_unbound_wqKarol Wachowski
Recovery work doesn't need to be bound to any specific CPU, so move it to unbound workqueue to improve execution time and system latency. Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-7-jacek.lawrynowicz@linux.intel.com
2025-02-03accel/ivpu: Enable recovery and adjust timeouts for fpgaTomasz Rusinowicz
Recovery now works on fpga. JSM state dump timeout needs to be really long for the new fpga model releases. Enable punit on fpga. Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-6-jacek.lawrynowicz@linux.intel.com
2025-02-03accel/ivpu: Turn on HWS by default on all platformsKarol Wachowski
Hardware scheduling (HWS) is supposed to be supported on all existing platform with recent FW including pre-silicon ones. Turn on HWS by default. Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-5-jacek.lawrynowicz@linux.intel.com
2025-02-03accel/ivpu: Fix missing MMU events if file_priv is unboundKarol Wachowski
Move the ivpu_mmu_discard_events() function to the common portion of the abort work function. This ensures it is called only once, even if there are no faulty contexts in context_xa, to guarantee that MMU events are discarded and new events are not missed. Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-4-jacek.lawrynowicz@linux.intel.com
2025-02-03accel/ivpu: Update last_busy in IRQ handlerJacek Lawrynowicz
Call pm_runtime_mark_last_busy() in top half of IRQ handler to prevent device from being runtime suspended before bottom half is executed on a workqueue. Reviewed-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-3-jacek.lawrynowicz@linux.intel.com
2025-02-03accel/ivpu: Add support for hardware fault injectionJacek Lawrynowicz
Introduces the capability to simulate hardware faults for testing purposes. The new `fail_hw` fault can be injected in `ivpu_hw_reg_poll_fld()`, which is used in various parts of the driver to wait for the hardware to reach a specific state. This allows to test failures during NPU boot and shutdown, IPC message handling and more. Fault injection can be enabled using debugfs or a module parameter. Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-2-jacek.lawrynowicz@linux.intel.com
2025-02-01Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 8 are cc:stable and the remainder address post-6.13 issues. 13 are for MM and 8 are for non-MM. All are singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) MAINTAINERS: include linux-mm for xarray maintenance revert "xarray: port tests to kunit" MAINTAINERS: add lib/test_xarray.c mailmap, MAINTAINERS, docs: update Carlos's email address mm/hugetlb: fix hugepage allocation for interleaved memory nodes mm: gup: fix infinite loop within __get_longterm_locked mm, swap: fix reclaim offset calculation error during allocation .mailmap: update email address for Christopher Obbard kfence: skip __GFP_THISNODE allocations on NUMA systems nilfs2: fix possible int overflows in nilfs_fiemap() mm: compaction: use the proper flag to determine watermarks kernel: be more careful about dup_mmap() failures and uprobe registering mm/fake-numa: handle cases with no SRAT info mm: kmemleak: fix upper boundary check for physical address objects mailmap: add an entry for Hamza Mahfooz MAINTAINERS: mailmap: update Yosry Ahmed's email address scripts/gdb: fix aarch64 userspace detection in get_current_task mm/vmscan: accumulate nr_demoted for accurate demotion statistics ocfs2: fix incorrect CPU endianness conversion causing mount failure mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc() ...
2025-02-01Merge tag 'media/v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A revert for a regression in the uvcvideo driver" * tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
2025-02-01mm/fake-numa: handle cases with no SRAT infoBruno Faccini
Handle more gracefully cases where no SRAT information is available, like in VMs with no Numa support, and allow fake-numa configuration to complete successfully in these cases Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com Fixes: 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”) Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Len Brown <lenb@kernel.org> Cc: "Mike Rapoport (IBM)" <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-31Merge tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "This is only AMD fixes: amdgpu: - GC 12 fix - Aldebaran fix - DCN 3.5 fix - Freesync fix amdkfd: - Per queue reset fix - MES fix" * tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel: drm/amd/display: restore invalid MSA timing check for freesync drm/amdkfd: only flush the validate MES contex drm/amd/display: Correct register address in dcn35 drm/amd/pm: Mark MM activity as unsupported drm/amd/amdgpu: change the config of cgcg on gfx12 drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1
2025-01-31Merge tag 'pci-v6.14-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Save the original INTX_DISABLE bit at the first pcim_intx() call and restore that at devres cleanup instead of restoring the opposite of the most recent enable/disable pcim_intx() argument, which was wrong when a driver called pcim_intx() multiple times or with the already enabled state (Takashi Iwai) * tag 'pci-v6.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Restore original INTX_DISABLE bit by pcim_intx()
2025-01-31Merge tag 'riscv-for-linus-6.14-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - The PH1520 pinctrl and dwmac drivers are enabeled in defconfig - A redundant AQRL barrier has been removed from the futex cmpxchg implementation - Support for the T-Head vector extensions, which includes exposing these extensions to userspace on systems that implement them - Some more page table information is now printed on die() and systems that cause PA overflows * tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: add a warning when physical memory address overflows riscv/mm/fault: add show_pte() before die() riscv: Add ghostwrite vulnerability selftests: riscv: Support xtheadvector in vector tests selftests: riscv: Fix vector tests riscv: hwprobe: Document thead vendor extensions and xtheadvector extension riscv: hwprobe: Add thead vendor extension probing riscv: vector: Support xtheadvector save/restore riscv: Add xtheadvector instruction definitions riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT RISC-V: define the elements of the VCSR vector CSR riscv: vector: Use vlenb from DT for thead riscv: Add thead and xtheadvector as a vendor extension riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree dt-bindings: cpus: add a thead vlen register length property dt-bindings: riscv: Add xtheadvector ISA extension description RISC-V: Mark riscv_v_init() as __init riscv: defconfig: drop RT_GROUP_SCHED=y riscv/futex: Optimize atomic cmpxchg riscv: defconfig: enable pinctrl and dwmac support for TH1520
2025-01-31Revert "media: uvcvideo: Require entities to have a non-zero unique ID"Thadeu Lima de Souza Cascardo
This reverts commit 3dd075fe8ebbc6fcbf998f81a75b8c4b159a6195. Tomasz has reported that his device, Generalplus Technology Inc. 808 Camera, with ID 1b3f:2002, stopped being detected: $ ls -l /dev/video* zsh: no matches found: /dev/video* [ 7.230599] usb 3-2: Found multiple Units with ID 5 This particular device is non-compliant, having both the Output Terminal and Processing Unit with ID 5. uvc_scan_fallback, though, is able to build a chain. However, when media elements are added and uvc_mc_create_links call uvc_entity_by_id, it will get the incorrect entity, media_create_pad_link will WARN, and it will fail to register the entities. In order to reinstate support for such devices in a timely fashion, reverting the fix for these warnings is appropriate. A proper fix that considers the existence of such non-compliant devices will be submitted in a later development cycle. Reported-by: Tomasz Sikora <sikora.tomus@gmail.com> Fixes: 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID") Cc: stable@vger.kernel.org Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250114200045.1401644-1-cascardo@igalia.com Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2025-01-31Merge tag 'block-6.14-20250131' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: - MD pull request via Song: - Fix a md-cluster regression introduced - More sysfs race fixes - Mark anything inside queue freezing as not being able to do IO for memory allocations - Fix for a regression introduced in loop in this merge window - Fix for a regression in queue mapping setups introduced in this merge window - Fix for the block dio fops attempting an iov_iter revert upton getting -EIOCBQUEUED on the read side. This one is going to stable as well * tag 'block-6.14-20250131' of git://git.kernel.dk/linux: block: force noio scope in blk_mq_freeze_queue block: fix nr_hw_queue update racing with disk addition/removal block: get rid of request queue ->sysfs_dir_lock loop: don't clear LO_FLAGS_PARTSCAN on LOOP_SET_STATUS{,64} md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime blk-mq: create correct map for fallback case block: don't revert iter for -EIOCBQUEUED
2025-01-31Merge tag 'ata-6.14-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull more ata updates from Niklas Cassel: - Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives (Daniel) - Ensure that PIO transfers using libata-sff cannot write outside the allocated buffer (me) * tag 'ata-6.14-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-sff: Ensure that we cannot write outside the allocated buffer ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
2025-01-31Merge tag 'sound-fix-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here is a collection of fixes that have been gathered since the previous pull request. All about device-specific fixes and quirks, and most of them are pretty small and trivial" * tag 'sound-fix-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits) ALSA: hda/realtek: Workaround for resume on Dell Venue 11 Pro 7130 ALSA: hda: Fix headset detection failure due to unstable sort ALSA: pcm: use new array-copying-wrapper ASoC: codec: es8316: "DAC Soft Ramp Rate" is just a 2 bit control ASoC: amd: acp: Fix possible deadlock firmware: cs_dsp: FW_CS_DSP_KUNIT_TEST should not select REGMAP ALSA: usb-audio: Add delay quirk for iBasso DC07 Pro ALSA: hda/realtek: Fix quirk matching for Legion Pro 7 ASoC: renesas: SND_SIU_MIGOR should depend on DMADEVICES ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V ASoC: da7213: Initialize the mutex ASoC: use to_platform_device() instead of container_of() ASoC: acp: Support microphone from Lenovo Go S ASoC: SOF: imx8m: Add entry for new 8M Plus revision ASoC: SOF: imx8: Add entries for new 8QM and 8QXP revisions ASoC: SOF: imx: Add mach entry to select cs42888 topology dt-bindings: arm: imx: Add board revisions for i.MX8MP, i.MX8QM and i.MX8QXP ASoC: fsl_asrc_m2m: select CONFIG_DMA_SHARED_BUFFER ASoC: audio-graph-card2: use correct endpoint when getting link parameters ASoC: SOF: imx8m: add SAI2,5,6,7 ...
2025-01-31accel/qaic: Add AIC200 supportJeffrey Hugo
Add basic support for the new AIC200 product. The PCIe Device ID is 0xa110. With this, we can turn on the lights for AIC200 by leveraging much of the existing driver. Co-developed-by: Youssef Samir <quic_yabdulra@quicinc.com> Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-8-quic_jhugo@quicinc.com
2025-01-31accel/qaic: Add config structs for supported cardsJeffrey Hugo
As the number of cards supported by the driver grows, their configurations will differ. The driver needs to become more dynamic to support these configurations. Currently, each card may differ in the exposed BARs, the regions they map to, and the family. Create config structs for each card, and let the driver configure the qaic_device struct based on the configurations passed to the driver. Co-developed-by: Youssef Samir <quic_yabdulra@quicinc.com> Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-7-quic_jhugo@quicinc.com
2025-01-31accel/qaic: Mask out SR-IOV PCI resourcesYoussef Samir
During the initialization of the qaic device, pci_select_bars() is used to fetch a bitmask of the BARs exposed by the device. On devices that have Virtual Functions capabilities, the bitmask includes SR-IOV BARs. Use a mask to filter out SR-IOV BARs if they exist. Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-6-quic_jhugo@quicinc.com
2025-01-31accel/qaic: Add support for MSI-XYoussef Samir
AIC200 device will support MSI-X while AIC100 devices will keep using MSI. pci_alloc_irq_vectors() will try to allocate MSI-X vectors if it is supported by the target device, otherwise, it will fallback to MSI. Add support for MSI-X vectors allocation for AIC200 devices. Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-5-quic_jhugo@quicinc.com
2025-01-31accel/qaic: Allocate an exact number of MSIsYoussef Samir
Devices use 1 MSI vector for the MHI controller and as many vectors as the DMA bridge channels on the device. During the probing of the device, the driver allocates 32 MSI vectors, which is usually more than what is needed for AIC100 devices, which is wasting resources. Allocate only the needed number of MSI vectors per device. Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by: Troy Hanson <quic_thanson@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-4-quic_jhugo@quicinc.com
2025-01-31bus: mhi: host: Add a policy to enable image transfer via BHIe in PBLMatthew Leung
Currently, MHI host only performs firmware transfer via BHI in PBL and BHIe from SBL. To support BHIe transfer directly from PBL, a policy needs to be added. With this policy, BHIe will be used to transfer firmware in PBL if the MHI controller has BHIe regs, sets seg_len, and does not set fbc_download. The intention is to transfer firmware using BHIe in PBL without further BHIe transfers in SBL. Signed-off-by: Matthew Leung <quic_mattleun@quicinc.com> Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-3-quic_jhugo@quicinc.com
2025-01-31bus: mhi: host: Refactor BHI/BHIe based firmware loadingMatthew Leung
Refactor the firmware loading code to have distinct helper functions for BHI and BHIe operations. This lays the foundation for separating the firmware loading protocol from the firmware being loaded and the EE it is loaded in. Signed-off-by: Matthew Leung <quic_mattleun@quicinc.com> Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250117170943.2643280-2-quic_jhugo@quicinc.com
2025-01-31block: force noio scope in blk_mq_freeze_queueChristoph Hellwig
When block drivers or the core block code perform allocations with a frozen queue, this could try to recurse into the block device to reclaim memory and deadlock. Thus all allocations done by a process that froze a queue need to be done without __GFP_IO and __GFP_FS. Instead of tying to track all of them down, force a noio scope as part of freezing the queue. Note that nvme is a bit of a mess here due to the non-owner freezes, and they will be addressed separately. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-30Merge tag 'ubifs-for-linus-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: "UBI: - New interface to dump detailed erase counters - Fixes around wear-leveling UBIFS: - Minor cleanups - Fix for TNC dumping code" * tag 'ubifs-for-linus-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: ubi_get_ec_info: Fix compiling error 'cast specifies array type' ubi: Implement ioctl for detailed erase counters ubi: Expose interface for detailed erase counters ubifs: skip dumping tnc tree when zroot is null ubi: Revert "ubi: wl: Close down wear-leveling before nand is suspended" ubifs: ubifs_dump_leb: remove return from end of void function ubifs: dump_lpt_leb: remove return at end of void function ubi: Add a check for ubi_num
2025-01-30Merge tag 'rtc-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle, there are multiple small fixes. Core: - use boolean values with device_init_wakeup() Drivers: - pcf2127: add BSM support - pcf85063: fix possible out of bounds write" * tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: add BSM support rtc: Remove hpet_rtc_dropped_irq() dt-bindings: rtc: mxc: Document fsl,imx31-rtc rtc: stm32: Use syscon_regmap_lookup_by_phandle_args rtc: zynqmp: Fix optional clock name property rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr() rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read rtc: tps6594: Fix integer overflow on 32bit systems rtc: use boolean values with device_init_wakeup() rtc: RTC_DRV_SPEAR should not default to y when compile-testing
2025-01-30Merge tag 'i2c-for-6.14-rc1-take2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - add a missing Kconfig dependency for imx-lpi2c - in the core, handle the new per-client debugfs directory during probe/remove, not during {un}register * tag 'i2c-for-6.14-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Fix core-managed per-client debugfs handling i2c: imx-lpi2c: select CONFIG_I2C_SLAVE
2025-01-30Merge tag 'acpi-6.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Add a new ACPI-related quirk for Vexia EDU ATLA 10 tablet 5V (Hans de Goede) and fix the MADT parsing code so that CPUs with different entry types (LAPIC and x2APIC) are initialized in the order in which they appear in the MADT as required by the ACPI specification (Zhang Rui)" * tag 'acpi-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/acpi: Fix LAPIC/x2APIC parsing order ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
2025-01-30Merge tag 'pm-6.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged power management material with the addition of some teo cpuidle governor updates, some of which may also be regarded as fixes: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang) - Revert a commit that added unused macros (Andy Shevchenko) - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent system-wide resume transition (Rafael Wysocki) - Clean up the teo cpuidle governor and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver (Rafael Wysocki) - Fix some boost-related issues in cpufreq (Lifeng Zheng) - Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh Kumar) - Remove unconditional binding of schedutil governor kthreads to the affected CPUs if the cpufreq driver indicates that updates can happen from any CPU (Christian Loehle)" * tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Synchronize runtime PM status of parents and children cpufreq: airoha: Depends on OF PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend() cpufreq/schedutil: Only bind threads if needed cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init() cpufreq: CPPC: Fix wrong max_freq in policy initialization cpufreq: Introduce a more generic way to set default per-policy boost flag cpufreq: Fix re-boost issue after hotplugging a CPU cpufreq: s3c64xx: Fix compilation warning cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code
2025-01-30Merge branch 'pm-sleep'Rafael J. Wysocki
Merge fixes related to system sleep for 6.14-rc1: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang). - Revert a commit that added unused macros (Andy Shevchenko). - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent syste-wide resume transition (Rafael Wysocki). * pm-sleep: PM: sleep: core: Synchronize runtime PM status of parents and children PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend()
2025-01-30Merge branch 'pm-cpuidle'Rafael J. Wysocki
Merge updates of the teo cpuidle governor for 6.14-rc1 that clean it up and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver. * pm-cpuidle: cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code
2025-01-30Merge tag 'net-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from IPSec, netfilter and Bluetooth. Nothing really stands out, but as usual there's a slight concentration of fixes for issues added in the last two weeks before the merge window, and driver bugs from 6.13 which tend to get discovered upon wider distribution. Current release - regressions: - net: revert RTNL changes in unregister_netdevice_many_notify() - Bluetooth: fix possible infinite recursion of btusb_reset - eth: adjust locking in some old drivers which protect their state with spinlocks to avoid sleeping in atomic; core protects netdev state with a mutex now Previous releases - regressions: - eth: - mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node() - bgmac: reduce max frame size to support just 1500 bytes; the jumbo frame support would previously cause OOB writes, but now fails outright - mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid false detection of MPTCP blackholing Previous releases - always broken: - mptcp: handle fastopen disconnect correctly - xfrm: - make sure skb->sk is a full sock before accessing its fields - fix taking a lock with preempt disabled for RT kernels - usb: ipheth: improve safety of packet metadata parsing; prevent potential OOB accesses - eth: renesas: fix missing rtnl lock in suspend/resume path" * tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) MAINTAINERS: add Neal to TCP maintainers net: revert RTNL changes in unregister_netdevice_many_notify() net: hsr: fix fill_frame_info() regression vs VLAN packets doc: mptcp: sysctl: blackhole_timeout is per-netns mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted netfilter: nf_tables: reject mismatching sum of field_len with set key length net: sh_eth: Fix missing rtnl lock in suspend/resume path net: ravb: Fix missing rtnl lock in suspend/resume path selftests/net: Add test for loading devbound XDP program in generic mode net: xdp: Disallow attaching device-bound programs in generic mode tcp: correct handling of extreme memory squeeze bgmac: reduce max frame size to support just MTU 1500 vsock/test: Add test for connect() retries vsock/test: Add test for UAF due to socket unbinding vsock/test: Introduce vsock_connect_fd() vsock/test: Introduce vsock_bind() vsock: Allow retrying on connect() failure vsock: Keep the binding until socket destruction Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming ...
2025-01-30Merge tag 's390-6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Alexander Gordeev: - The rework that uncoupled physical and virtual address spaces inadvertently prevented KASAN shadow mappings from using large pages. Restore large page mappings for KASAN shadows - Add decompressor routine physmem_alloc() that may fail, unlike physmem_alloc_or_die(). This allows callers to implement fallback paths - Allow falling back from large pages to smaller pages (1MB or 4KB) if the allocation of 2GB pages in the decompressor can not be fulfilled - Add to the decompressor boot print support of "%%" format string, width and padding hadnling, length modifiers and decimal conversion specifiers - Add to the decompressor message severity levels similar to kernel ones. Support command-line options that control console output verbosity - Replaces boot_printk() calls with appropriate loglevel- specific helpers such as boot_emerg(), boot_warn(), and boot_debug(). - Collect all boot messages into a ring buffer independent of the current log level. This is particularly useful for early crash analysis - If 'earlyprintk' command line parameter is not specified, store decompressor boot messages in a ring buffer to be printed later by the kernel, once the console driver is registered - Add 'bootdebug' command line parameter to enable printing of decompressor debug messages when needed. That parameters allows message suppressing and filtering - Dump boot messages on a decompressor crash, but only if 'bootdebug' command line parameter is enabled - When CONFIG_PRINTK_TIME is enabled, add timestamps to boot messages in the same format as regular printk() - Dump physical memory tracking information on boot: online ranges, reserved areas and vmem allocations - Dump virtual memory layout and randomization details - Improve decompression error reporting and dump the message ring buffer in case the boot failed and system halted - Add an exception handler which handles exceptions when FPU control register is attempted to be set to an invalid value. Remove '.fixup' section as result of this change - Use 'A', 'O', and 'R' inline assembly format flags, which allows recent Clang compilers to generate better FPU code - Rework uaccess code so it reads better and generates more efficient code - Cleanup futex inline assembly code - Disable KMSAN instrumention for futex inline assemblies, which contain dereferenced user pointers. Otherwise, shadows for the user pointers would be accessed - PFs which are not initially configured but in standby create only a single-function PCI domain. If they are configured later on, sibling PFs and their child VFs will not be added to their PCI domain breaking SR-IOV expectations. Fix that by allowing initially configured but in standby PFs create multi-function PCI domains - Add '-std=gnu11' to decompressor and purgatory CFLAGS to avoid compile errors caused by kernel's own definitions of 'bool', 'false', and 'true' conflicting with the C23 reserved keywords - Fix sclp subsystem failure when a sclp console is not present - Fix misuse of non-NULL terminated strings in vmlogrdr driver - Various other small improvements, cleanups and fixes * tag 's390-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits) s390/vmlogrdr: Use array instead of string initializer s390/vmlogrdr: Use internal_name for error messages s390/sclp: Initialize sclp subsystem via arch_cpu_finalize_init() s390/tools: Use array instead of string initializer s390/vmem: Fix null-pointer-arithmetic warning in vmem_map_init() s390: Add '-std=gnu11' to decompressor and purgatory CFLAGS s390/bitops: Use correct constraint for arch_test_bit() inline assembly s390/pci: Fix SR-IOV for PFs initially in standby s390/futex: Avoid KMSAN instrumention for user pointers s390/uaccess: Rename get_put_user_noinstr_attributes to uaccess_kmsan_or_inline s390/futex: Cleanup futex_atomic_cmpxchg_inatomic() s390/futex: Generate futex atomic op functions s390/uaccess: Remove INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER s390/uaccess: Use asm goto for put_user()/get_user() s390/uaccess: Remove usage of the oac specifier s390/uaccess: Replace EX_TABLE_UA_LOAD_MEM exception handling s390/uaccess: Cleanup noinstr __put_user()/__get_user() inline assembly constraints s390/uaccess: Remove __put_user_fn()/__get_user_fn() wrappers s390/uaccess: Move put_user() / __put_user() close to put_user() asm code s390/uaccess: Use asm goto for __mvc_kernel_nofault() ...
2025-01-30Merge tag 'gpio-fixes-for-v6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - update gpio-sim selftests to not fail now that we no longer allow rmdir() on configfs entries of active devices - remove leftover code from gpio-mxc * tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: selftests: gpio: gpio-sim: Fix missing chip disablements gpio: mxc: remove dead code after switch to DT-only
2025-01-30net: sh_eth: Fix missing rtnl lock in suspend/resume pathKory Maincent
Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to sh_eth_close, sh_eth_open and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Fixes: b71af04676e9 ("sh_eth: add more PM methods") Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-30net: ravb: Fix missing rtnl lock in suspend/resume pathKory Maincent
Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to ravb_open, ravb_close and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Without this fix, the following warning is triggered: [ 39.032969] ============================= [ 39.032983] WARNING: suspicious RCU usage [ 39.033019] ----------------------------- [ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious rcu_dereference_protected() usage! ... [ 39.033597] stack backtrace: [ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted 6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7 [ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) [ 39.033628] Call trace: [ 39.033633] show_stack+0x14/0x1c (C) [ 39.033652] dump_stack_lvl+0xb4/0xc4 [ 39.033664] dump_stack+0x14/0x1c [ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c [ 39.033682] phy_detach+0x160/0x190 [ 39.033694] phy_disconnect+0x40/0x54 [ 39.033703] ravb_close+0x6c/0x1cc [ 39.033714] ravb_suspend+0x48/0x120 [ 39.033721] dpm_run_callback+0x4c/0x14c [ 39.033731] device_suspend+0x11c/0x4dc [ 39.033740] dpm_suspend+0xdc/0x214 [ 39.033748] dpm_suspend_start+0x48/0x60 [ 39.033758] suspend_devices_and_enter+0x124/0x574 [ 39.033769] pm_suspend+0x1ac/0x274 [ 39.033778] state_store+0x88/0x124 [ 39.033788] kobj_attr_store+0x14/0x24 [ 39.033798] sysfs_kf_write+0x48/0x6c [ 39.033808] kernfs_fop_write_iter+0x118/0x1a8 [ 39.033817] vfs_write+0x27c/0x378 [ 39.033825] ksys_write+0x64/0xf4 [ 39.033833] __arm64_sys_write+0x18/0x20 [ 39.033841] invoke_syscall+0x44/0x104 [ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4 [ 39.033862] do_el0_svc+0x18/0x20 [ 39.033870] el0_svc+0x3c/0xf0 [ 39.033880] el0t_64_sync_handler+0xc0/0xc4 [ 39.033888] el0t_64_sync+0x154/0x158 [ 39.041274] ravb 11c30000.ethernet eth0: Link is Down Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/ Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-30Merge tag 'for-net-2025-01-29' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btusb: mediatek: Add locks for usb_driver_claim_interface() - L2CAP: accept zero as a special value for MTU auto-selection - btusb: Fix possible infinite recursion of btusb_reset - Add ABI doc for sysfs reset - btnxpuart: Fix glitches seen in dual A2DP streaming * tag 'for-net-2025-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming Bluetooth: Add ABI doc for sysfs reset Bluetooth: Fix possible infinite recursion of btusb_reset Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface() ==================== Link: https://patch.msgid.link/20250129210057.1318963-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-29bgmac: reduce max frame size to support just MTU 1500Rafał Miłecki
bgmac allocates new replacement buffer before handling each received frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU time. Ideally bgmac should just respect currently set MTU but it isn't the case right now. For now just revert back to the old limited frame size. This change bumps NAT masquerade speed by ~95%. Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for page_frag_alloc_align()"), the bgmac driver fails to open its network interface successfully and runs out of memory in the following call stack: bgmac_open -> bgmac_dma_init -> bgmac_dma_rx_skb_for_slot -> netdev_alloc_frag BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768. Eventually we land into __page_frag_alloc_align() with the following parameters across multiple successive calls: __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096 __page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144 So in that case we do indeed have offset + fragsz (40192) > size (32768) and so we would eventually return NULL. Reverting to the older 1500 bytes MTU allows the network driver to be usable again. Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> [florian: expand commit message about recent commits] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-29Merge tag 'soundwire-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - SoundWire multi lane support to use multiple lanes if supported - Stream handling of DEPREPARED state - AMD wake register programming for power off mode * tag 'soundwire-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: clear wake enable register for power off mode soundwire: generic_bandwidth_allocation: count the bandwidth of active streams only SoundWire: pass stream to compute_params() soundwire: generic_bandwidth_allocation: add lane in sdw_group_params soundwire: generic_bandwidth_allocation: select data lane soundwire: generic_bandwidth_allocation: check required freq accurately soundwire: generic_bandwidth_allocation: correct clk_freq check in sdw_select_row_col Soundwire: generic_bandwidth_allocation: set frame shape on fly Soundwire: stream: program BUSCLOCK_SCALE Soundwire: add sdw_slave_get_scale_index helper soundwire: generic_bandwidth_allocation: skip DEPREPARED streams soundwire: stream: set DEPREPARED state earlier soundwire: add lane_used_bandwidth in struct sdw_bus soundwire: mipi_disco: read lane mapping properties from ACPI soundwire: add lane field in sdw_port_runtime soundwire: bus: Move irq mapping cleanup into devres
2025-01-29Merge tag 'phy-for-6.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "Lots of Qualcomm and Rockchip device support. New Support: - Qualcomm SAR2130P qmp usb, SAR2130P qmp pcie, QCS615 qusb2 and PCIe, IPQ5424 qmp pcie, IPQ5424 QUSB2 and USB3 PHY - Rockchip rk3576 combo phy support Updates: - Drop Shengyang for JH7110 maintainer - Freescale hdmi register calculation optimization - Rockchip pcie phy mutex and regmap updates" * tag 'phy-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (37 commits) dt-bindings: phy: qcom,qmp-pcie: document the SM8350 two lanes PCIe PHY phy: rockchip: phy-rockchip-typec: Fix Copyright description dt-bindings: phy: qcom,ipq8074-qmp-pcie: Document the IPQ5424 QMP PCIe PHYs phy: qcom-qusb2: Add support for QCS615 dt-bindings: usb: qcom,dwc3: Add QCS615 to USB DWC3 bindings phy: core: Simplify API of_phy_simple_xlate() implementation phy: sun4i-usb: Remove unused of_gpio.h phy: HiSilicon: Don't use "proxy" headers phy: samsung-ufs: switch back to syscon_regmap_lookup_by_phandle() phy: qualcomm: qmp-pcie: add support for SAR2130P phy: qualcomm: qmp-pcie: define several new registers phy: qualcomm: qmp-pcie: split PCS_LANE1 region phy: qualcomm: qmp-combo: add support for SAR2130P dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SAR2130P compatible dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add SAR2130P compatible phy: freescale: fsl-samsung-hdmi: Clean up fld_tg_code calculation phy: freescale: fsl-samsung-hdmi: Stop searching when exact match is found phy: freescale: fsl-samsung-hdmi: Expand Integer divider range phy: rockchip-naneng-combo: add rk3576 support dt-bindings: phy: rockchip: add rk3576 compatible ...
2025-01-29Merge tag 'dmaengine-6.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "A bunch of new device support and updates to few drivers, biggest of them amd ones. New support: - TI J722S CSI BCDMA controller support - Intel idxd Panther Lake family platforms - Allwinner F1C100s suniv DMA - Qualcomm QCS615, QCS8300, SM8750, SA8775P GPI dma controller support - AMD ae4dma controller support and reorganisation of amd driver Updates: - Channel page support for Nvidia Tegra210 adma driver - Freescale support for S32G based platforms - Yamilfy atmel dma bindings" * tag 'dmaengine-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (45 commits) dmaengine: idxd: Enable Function Level Reset (FLR) for halt dmaengine: idxd: Refactor halt handler dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers dmaengine: idxd: Binding and unbinding IDXD device and driver dmaengine: idxd: Add idxd_pci_probe_alloc() helper dt-bindings: dma: atmel: Convert to json schema dt-bindings: dma: st-stm32-dmamux: Add description for dma-cell values dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol dt-bindings: dma: adi,axi-dmac: deprecate adi,channels node dt-bindings: dma: adi,axi-dmac: convert to yaml schema dmaengine: mv_xor: switch to for_each_child_of_node_scoped() dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy dmaengine: tegra210-adma: Support channel page dt-bindings: dma: Support channel page to nvidia,tegra210-adma dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA dt-bindings: dma: ti: k3-bcdma: Add J722S CSI BCDMA dmaengine: ti: edma: fix OF node reference leaks in edma_driver dmaengine: ti: edma: make the loop condition simpler in edma_probe() dmaengine: fsl-edma: read/write multiple registers in cyclic transactions dmaengine: fsl-edma: add support for S32G based platforms ...
2025-01-29Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streamingNeeraj Sanjay Kale
This fixes a regression caused by previous commit for fixing truncated ACL data, which is causing some intermittent glitches when running two A2DP streams. serdev_device_write_buf() is the root cause of the glitch, which is reverted, and the TX work will continue to write until the queue is empty. This change fixes both issues. No A2DP streaming glitches or truncated ACL data issue observed. Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data") Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 05:46:05 +0000