summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-23md: use mddev->external to select holder in export_rdev()Song Liu
mdadm test "10ddf-create-fail-rebuild" triggers warnings like the following [ 215.526357] ------------[ cut here ]------------ [ 215.527243] WARNING: CPU: 18 PID: 1264 at block/bdev.c:617 blkdev_put+0x269/0x350 [ 215.528334] Modules linked in: [ 215.528806] CPU: 18 PID: 1264 Comm: mdmon Not tainted 6.4.0-rc2+ #768 [ 215.529863] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [ 215.531464] RIP: 0010:blkdev_put+0x269/0x350 [ 215.532167] Code: ff ff 49 8d 7d 10 e8 56 bf b8 ff 4d 8b 65 10 49 8d bc 24 58 05 00 00 e8 05 be b8 ff 41 83 ac 24 58 05 00 00 01 e9 44 ff ff ff <0f> 0b e9 52 fe ff ff 0f 0b e9 6b fe ff ff1 [ 215.534780] RSP: 0018:ffffc900040bfbf0 EFLAGS: 00010283 [ 215.535635] RAX: ffff888174001000 RBX: ffff88810b1c3b00 RCX: ffffffff819a4061 [ 215.536645] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: ffff88810b1c3ba0 [ 215.537657] RBP: ffff88810dbde800 R08: fffffbfff0fca983 R09: fffffbfff0fca983 [ 215.538674] R10: ffffc900040bfbf0 R11: fffffbfff0fca982 R12: ffff88810b1c3b38 [ 215.539687] R13: ffff88810b1c3b10 R14: ffff88810dbdecb8 R15: ffff88810b1c3b00 [ 215.540833] FS: 00007f2aabdff700(0000) GS:ffff888dfb400000(0000) knlGS:0000000000000000 [ 215.541961] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 215.542775] CR2: 00007fa19a85d934 CR3: 000000010c076006 CR4: 0000000000370ee0 [ 215.543814] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 215.544840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 215.545885] Call Trace: [ 215.546257] <TASK> [ 215.546608] export_rdev.isra.63+0x71/0xe0 [ 215.547338] mddev_unlock+0x1b1/0x2d0 [ 215.547898] array_state_store+0x28d/0x450 [ 215.548519] md_attr_store+0xd7/0x150 [ 215.549059] ? __pfx_sysfs_kf_write+0x10/0x10 [ 215.549702] kernfs_fop_write_iter+0x1b9/0x260 [ 215.550351] vfs_write+0x491/0x760 [ 215.550863] ? __pfx_vfs_write+0x10/0x10 [ 215.551445] ? __fget_files+0x156/0x230 [ 215.552053] ksys_write+0xc0/0x160 [ 215.552570] ? __pfx_ksys_write+0x10/0x10 [ 215.553141] ? ktime_get_coarse_real_ts64+0xec/0x100 [ 215.553878] do_syscall_64+0x3a/0x90 [ 215.554403] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 215.555125] RIP: 0033:0x7f2aade11847 [ 215.555696] Code: c3 66 90 41 54 49 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 1b fd ff ff 4c 89 e2 48 89 ee 89 df 41 89 c0 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 448 [ 215.558398] RSP: 002b:00007f2aabdfeba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 215.559516] RAX: ffffffffffffffda RBX: 0000000000000010 RCX: 00007f2aade11847 [ 215.560515] RDX: 0000000000000005 RSI: 0000000000438b8b RDI: 0000000000000010 [ 215.561512] RBP: 0000000000438b8b R08: 0000000000000000 R09: 00007f2aaecf0060 [ 215.562511] R10: 000000000e3ba40b R11: 0000000000000293 R12: 0000000000000005 [ 215.563647] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000c70750 [ 215.564693] </TASK> [ 215.565029] irq event stamp: 15979 [ 215.565584] hardirqs last enabled at (15991): [<ffffffff811a7432>] __up_console_sem+0x52/0x60 [ 215.566806] hardirqs last disabled at (16000): [<ffffffff811a7417>] __up_console_sem+0x37/0x60 [ 215.568022] softirqs last enabled at (15716): [<ffffffff8277a2db>] __do_softirq+0x3eb/0x531 [ 215.569239] softirqs last disabled at (15711): [<ffffffff810d8f45>] irq_exit_rcu+0x115/0x160 [ 215.570434] ---[ end trace 0000000000000000 ]--- This means export_rdev() calls blkdev_put with a different holder than the one used by blkdev_get_by_dev(). This is because mddev->major_version == -2 is not a good check for external metadata. Fix this by using mddev->external instead. Also, do not clear mddev->external in md_clean(), as the flag might be used later in export_rdev(). Fixes: 2736e8eeb0cc ("block: use the holder as indication for exclusive opens") Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230617052405.305871-1-song@kernel.org
2023-06-23md/raid1-10: fix casting from randomized structure in raid1_submit_write()Yu Kuai
Following build error triggered while build with clang version 17.0.0 with W=1(this can't be reporduced with gcc 13.1.0): drivers/md/raid1-10.c:117:25: error: casting from randomized structure pointer type 'struct block_device *' to 'struct md_rdev *' 117 | struct md_rdev *rdev = (struct md_rdev *)bio->bi_bdev; | ^ Fix this by casting 'bio->bi_bdev' to 'void *', as it used to be. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306142042.fmjfmTF8-lkp@intel.com/ Fixes: 8295efbe68c0 ("md/raid1-10: factor out a helper to submit normal write") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230616012136.3047071-1-yukuai1@huaweicloud.com
2023-06-23md/raid10: fix the condition to call bio_end_io_acct()Li Nan
/sys/block/[device]/queue/iostats is used to control whether to count io stat. Write 0 to it will clear queue_flags QUEUE_FLAG_IO_STAT which means iostats is disabled. If we disable iostats and later endable it, the io issued during this period will be counted incorrectly, inflight will be decreased to -1. //T1 set iostats echo 0 > /sys/block/md0/queue/iostats clear QUEUE_FLAG_IO_STAT //T2 issue io if (QUEUE_FLAG_IO_STAT) -> false bio_start_io_acct inflight++ echo 1 > /sys/block/md0/queue/iostats set QUEUE_FLAG_IO_STAT //T3 io end if (QUEUE_FLAG_IO_STAT) -> true bio_end_io_acct inflight-- -> -1 Also, if iostats is enabled while issuing io but disabled while io end, inflight will never be decreased. Fix it by checking start_time when io end. If start_time is not 0, call bio_end_io_acct(). Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting") Signed-off-by: Li Nan <linan122@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230609094320.2397604-1-linan666@huaweicloud.com
2023-06-23regulator: Add Renesas PMIC RAA215300 driverBiju Das
The RAA215300 is a 9-channel PMIC that consists of * Internally compensated regulators * built-in Real Time Clock (RTC) * 32kHz crystal oscillator * coin cell battery charger The RTC on RAA215300 is similar to the IP found in the ISL1208. The existing driver for the ISL1208 works for this PMIC too, however the RAA215300 exposes two devices via I2C, one for the RTC IP, and one for everything else. The RTC IP has to be enabled by the other I2C device, therefore this driver is necessary to get the RTC to work. The external oscillator bit is inverted on PMIC version 0x11. Add PMIC RAA215300 driver for enabling RTC block and instantiating RTC device based on PMIC version. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230623140948.384762-3-biju.das.jz@bp.renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23hwmon: (corsair-psu) various cleanupsWilken Gottwalt
Fix some typos, adjust documentation and comments to current state of knowledge and update coding style to be more uniform. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZJWf3H972hGgLK-8@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-06-23dm ioctl: Refuse to create device named "." or ".."Demi Marie Obenour
Using either of these is going to greatly confuse userspace, as they are not valid symlink names and so creating the usual /dev/mapper/NAME symlink will not be possible. As creating a device with either of these names is almost certainly a userspace bug, just error out. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Refuse to create device named "control"Demi Marie Obenour
Typical userspace setups create a symlink under /dev/mapper with the name of the device, but /dev/mapper/control is reserved for DM's control device. Therefore, trying to create such a device is almost certain to be a userspace bug. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid double-fetch of versionDemi Marie Obenour
The version is fetched once in check_version(), which then does some validation and then overwrites the version in userspace with the API version supported by the kernel. copy_params() then fetches the version from userspace *again*, and this time no validation is done. The result is that the kernel's version number is completely controllable by userspace, provided that userspace can win a race condition. Fix this flaw by not copying the version back to the kernel the second time. This is not exploitable as the version is not further used in the kernel. However, it could become a problem if future patches start relying on the version field. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: structs and parameter strings must not overlapDemi Marie Obenour
The NUL terminator for each target parameter string must precede the following 'struct dm_target_spec'. Otherwise, dm_split_args() might corrupt this struct. Furthermore, the first 'struct dm_target_spec' must come after the 'struct dm_ioctl', as if it overlaps too much dm_split_args() could corrupt the 'struct dm_ioctl'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Avoid pointer arithmetic overflowDemi Marie Obenour
Especially on 32-bit systems, it is possible for the pointer arithmetic to overflow and cause a userspace pointer to be dereferenced in the kernel. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23dm ioctl: Check dm_target_spec is sufficiently alignedDemi Marie Obenour
Otherwise subsequent code, if given malformed input, could dereference a misaligned 'struct dm_target_spec *'. Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> # use %zu Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-06-23scsi/sg: don't grab scsi host module referenceYu Kuai
In order to prevent request_queue to be freed before cleaning up blktrace debugfs entries, commit db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") use scsi_device_get(), however, scsi_device_get() will also grab scsi module reference and scsi module can't be removed. It's reported that blktests can't unload scsi_debug after block/001: blktests (master) # ./check block block/001 (stress device hotplugging) [failed] +++ /root/blktests/results/nodev/block/001.out.bad 2023-06-19 Running block/001 Stressing sd +modprobe: FATAL: Module scsi_debug is in use. Fix this problem by grabbing request_queue reference directly, so that scsi host module can still be unloaded while request_queue will be pinged by sg device. Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com> Link: https://lore.kernel.org/all/1760da91-876d-fc9c-ab51-999a6f66ad50@nvidia.com/ Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230621160111.1433521-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-23pwm: Add Renesas RZ/G2L MTU3a PWM driverBiju Das
The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses one counter and two match components to configure duty_cycle and period to generate PWM output waveform. Add basic support for RZ/G2L MTU3a PWM driver by creating separate PWM channels for each IOs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: mtk_disp: Fix the disable flow of disp_pwmShuijing Li
There is a flow error in the original mtk_disp_pwm_apply() function. If this function is called when the clock is disabled, there will be a chance to operate the disp_pwm register, resulting in disp_pwm exception. Fix this accordingly. Fixes: 888a623db5d0 ("pwm: mtk-disp: Implement atomic API .apply()") Signed-off-by: Shuijing Li <shuijing.li@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Tested-by: Fei Shao <fshao@chromium.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: pca9685: Switch i2c driver back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: ab8500: Fix error code in probe()Dan Carpenter
This code accidentally return positive EINVAL instead of negative -EINVAL. Fixes: eb41f334589d ("pwm: ab8500: Fix register offset calculation to not depend on probe order") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: add microchip soft ip corePWM driverConor Dooley
Add a driver that supports the Microchip FPGA "soft" PWM IP core. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: sysfs: Do not apply state to already disabled PWMsMarek Vasut
If the PWM is exported but not enabled, do not call pwm_class_apply_state(). First of all, in this case, period may still be unconfigured and this would make pwm_class_apply_state() return -EINVAL, and then suspend would fail. Second, it makes little sense to apply state onto PWM that is not enabled before suspend. Failing case: " $ echo 1 > /sys/class/pwm/pwmchip4/export $ echo mem > /sys/power/state ... pwm pwmchip4: PM: dpm_run_callback(): pwm_class_suspend+0x1/0xa8 returns -22 pwm pwmchip4: PM: failed to suspend: error -22 PM: Some devices failed to suspend, or early wake event detected " Working case: " $ echo 1 > /sys/class/pwm/pwmchip4/export $ echo 100 > /sys/class/pwm/pwmchip4/pwm1/period $ echo 10 > /sys/class/pwm/pwmchip4/pwm1/duty_cycle $ echo mem > /sys/power/state ... " Do not call pwm_class_apply_state() in case the PWM is disabled to fix this issue. Fixes: 7fd4edc57bbae ("pwm: sysfs: Add suspend/resume support") Signed-off-by: Marek Vasut <marex@denx.de> Fixes: ef2bf4997f7d ("pwm: Improve args checking in pwm_apply_state()") Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: imx-tpm: force 'real_period' to be zero in suspendFancy Fang
During suspend, all the tpm registers will lose values. So the 'real_period' value of struct 'imx_tpm_pwm_chip' should be forced to be zero to force the period update code can be executed after system resume back. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 738a1cfec2ed ("pwm: Add i.MX TPM PWM driver support") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: make full use of common clock frameworkHeiner Kallweit
Newer versions of the PWM block use a core clock with external mux, divider, and gate. These components either don't exist any longer in the PWM block, or they are bypassed. To minimize needed changes for supporting the new version, the internal divider and gate should be handled by CCF too. I didn't see a good way to split the patch, therefore it's somewhat bigger. What it does: - The internal mux is handled by CCF already. Register also internal divider and gate with CCF, so that we have one representation of the input clock: [mux] parent of [divider] parent of [gate] - Now that CCF selects an appropriate mux parent, we don't need the DT-provided default parent any longer. Accordingly we can also omit setting the mux parent directly in the driver. - Instead of manually handling the pre-div divider value, let CCF set the input clock. Targeted input clock frequency is 0xffff * 1/period for best precision. - For the "inverted pwm disabled" scenario target an input clock frequency of ULONG_MAX. This ensures that the remaining low pulses have minimum length. I don't have hw with the old PWM block, therefore I couldn't test this patch. With the not yet included extension for the new PWM block (channel->clk coming directly from get_clk(external_clk)) I didn't notice any problem. My system uses PWM for the CPU voltage regulator and for the SDIO 32kHz clock. Note: The clock gate in the old PWM block is permanently disabled. This seems to indicate that it's not used by the new PWM block. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: don't use hdmi/video clock as mux parentHeiner Kallweit
The meson_vclk code from the display driver may change the rate of the video clock. Therefore better don't use it as pwm mux parent. After removing this clock from the parent list pwm_gxbb_data and pwm_g12a_ee_data are the same as pwm_meson8b_data. So we can remove them. Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: switch to using struct clk_parent_data for mux parentsHeiner Kallweit
We'll use struct clk_parent_data for mux/div/gate initialization in the follow-up patches. As a first step switch the mux from using parent_names to clk_parent_data. Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: remove not needed check in meson_pwm_calcHeiner Kallweit
period >= duty implies that cnt >= duty_cnt. We verified before that cnt <= 0xffff, therefore we can omit the check here. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: fix handling of period/duty if greater than UINT_MAXHeiner Kallweit
state->period/duty are of type u64, and if their value is greater than UINT_MAX, then the cast to uint will cause problems. Fix this by changing the type of the respective local variables to u64. Fixes: b79c3670e120 ("pwm: meson: Don't duplicate the polarity internally") Cc: stable@vger.kernel.org Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: meson: modify and simplify calculation in meson_pwm_get_stateHeiner Kallweit
I don't see a reason why we should treat the case lo < hi differently and return 0 as period and duty_cycle. The current logic was added with c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()"), Martin as original author doesn't remember why it was implemented this way back then. So let's handle it as normal use case and also remove the optimization for lo == 0. I think the improved readability is worth it. Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: mediatek: Add support for MT7981Daniel Golle
The PWM unit on MT7981 uses different register offsets than previous MediaTek PWM units. Add support for these new offsets and add support for PWM on MT7981 which has 3 PWM channels, one of them is typically used for a temperature controlled fan. While at it, also reorder pwm_mediatek_of_data entries to restore alphabetic order. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: sifive: Simplify using devm_clk_get_prepared()Uwe Kleine-König
Instead of preparing the clk after it was requested and unpreparing in .probe()'s error path and .remove(), use devm_clk_get_prepared() which copes for unpreparing automatically. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: clk: Use the devm_clk_get_prepared() helper functionChristophe JAILLET
Use the devm_clk_get_prepared() helper function instead of hand-writing it. It saves some line of codes. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23clk: ralink: mtmips: Fix uninitialized use of ret in ↵Nathan Chancellor
mtmips_register_{fixed,factor}_clocks() Clang warns: drivers/clk/ralink/clk-mtmips.c:309:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 309 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:285:9: note: initialize the variable 'ret' to silence this warning 285 | int ret, i; | ^ | = 0 drivers/clk/ralink/clk-mtmips.c:359:9: error: variable 'ret' is uninitialized when used here [-Werror,-Wuninitialized] 359 | return ret; | ^~~ drivers/clk/ralink/clk-mtmips.c:335:9: note: initialize the variable 'ret' to silence this warning 335 | int ret, i; | ^ | = 0 2 errors generated. Set ret to the return value of clk_hw_register_fixed_rate() using the PTR_ERR() macro, which ensures ret is not used uninitialized, clearing up the warning. Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs") Closes: https://github.com/ClangBuiltLinux/linux/issues/1879 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-06-23Merge tag 'at24-updates-for-v6.5' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow at24 updates for v6.5 - use dev_err_probe() where applicable
2023-06-23i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycleClark Wang
Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: qup: Add missing unwind goto in qup_i2c_probe()Shuai Jiang
Smatch Warns: drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() warn: missing unwind goto? The goto label "fail_runtime" and "fail" will disable qup->pclk, but here qup->pclk failed to obtain, in order to be consistent, change the direct return to goto label "fail_dma". Fixes: 9cedf3b2f099 ("i2c: qup: Add bam dma capabilities") Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Cc: <stable@vger.kernel.org> # v4.6+
2023-06-23i2c: uniphier: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: uniphier-f: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: owl: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: lpc2k: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23of: unittest: drop assertions for GPIO hog messagesBartosz Golaszewski
These have now been demoted to debug and are normally hidden. Drop the assertions entirely. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org>
2023-06-23i2c: hix5hd2: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23spi: Add support for Renesas CSIFabrizio Castro
The RZ/V2M SoC comes with the Clocked Serial Interface (CSI) IP, which is a master/slave SPI controller. This commit adds a driver to support CSI master mode. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/Message-Id: <20230622113341.657842-4-fabrizio.castro.jz@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-23i2c: sun6i-p2wi: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacksNathan Chancellor
Clang's kernel Control Flow Integrity (kCFI) is a compiler-based security mitigation that ensures the target of an indirect function call matches the expected type of the call and trapping if they do not match exactly. The warning -Wincompatible-function-pointer-types-strict aims to catch these issues at compile time, which reveals: drivers/leds/leds-mt6323.c:598:49: error: incompatible function pointer types assigning to 'int (*)(struct led_classdev *, enum led_brightness)' from 'int (struct led_classdev *, unsigned int)' [-Werror,-Wincompatible-function-pointer-types-strict] 598 | leds->led[reg]->cdev.brightness_set_blocking = | ^ 599 | mt6323_wled_set_brightness; | ~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/leds/leds-mt6323.c:600:40: error: incompatible function pointer types assigning to 'enum led_brightness (*)(struct led_classdev *)' from 'unsigned int (struct led_classdev *)' [-Werror,-Wincompatible-function-pointer-types-strict] 600 | leds->led[reg]->cdev.brightness_get = | ^ 601 | mt6323_get_wled_brightness; | ~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 errors generated. While 'unsigned int' is ABI compatible with 'enum led_brightness' (hence no warning from -Wincompatible-function-pointer-types) and the callers of these callbacks use/pass the values as 'unsigned int', the mismatch between the prototype and the called function will trip kCFI at runtime. Change the types in the implementations to match the prototypes, clearing up the warning and avoiding kCFI failures. Fixes: 9bb0a9e0626c ("leds: leds-mt6323: Add support for WLEDs and MT6332") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230622-mt6323-wled-wincompatible-function-pointer-types-strict-v1-1-6ad256f220e8@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-23i2c: pasemi-platform: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23i2c: mt7621: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23s390/ctcm: Convert sprintf/snprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Note that ctcm_print_statistics() writes the data into the kernel log and is therefore not suitable for sysfs_emit(). Observable behavior is not changed, as there may be dependencies. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/ctcm: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sprintf to scnprintfThorsten Winkler
This LWN article explains the why scnprintf is preferred over snprintf in general https://lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23s390/lcs: Convert sysfs sprintf to sysfs_emitThorsten Winkler
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, follow Linux kernel coding style and unify indentation Reported-by: Jules Irenge <jbi.octave@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23i2c: xiic: Use devm_clk_get_enabled()Andi Shyti
Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-23net: hns3: clear hns unused parameter alarmPeiyang Wang
Several functions in the hns3 driver have unused parameters. The compiler will warn about them when building with -Wunused-parameter option of hns3. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-23net: hns3: fix strncpy() not using dest-buf length as length issueHao Chen
Now, strncpy() in hns3_dbg_fill_content() use src-length as copy-length, it may result in dest-buf overflow. This patch is to fix intel compile warning for csky-linux-gcc (GCC) 12.1.0 compiler. The warning reports as below: hclge_debugfs.c:92:25: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] strncpy(pos, items[i].name, strlen(items[i].name)); hclge_debugfs.c:90:25: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] strncpy(pos, result[i], strlen(result[i])); strncpy() use src-length as copy-length, it may result in dest-buf overflow. So,this patch add some values check to avoid this issue. Signed-off-by: Hao Chen <chenhao418@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/lkml/202207170606.7WtHs9yS-lkp@intel.com/T/ Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 00:03:20 +0000