summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-04-15Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-13 This series contains updates to igc and e1000e drivers. Sasha removes waiting for hardware semaphore as it could cause an infinite loop and changes usleep_range() calls done under atomic context to udelay() for igc. For e1000e, he changes some variables from u16 to u32 to prevent possible overflow of values. Vinicius disables PTM when going to suspend as it is causing hang issues on some platforms for igc. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Fix possible overflow in LTR decoding igc: Fix suspending when PTM is active igc: Fix BUG: scheduling while atomic igc: Fix infinite loop in release_swfw_sync ==================== Link: https://lore.kernel.org/r/20220413170814.2066855-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15i2c: dev: check return value when calling dev_set_name()Andy Shevchenko
If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref. Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: qcom-geni: Use dev_err_probe() for GPI DMA errorBjorn Andersson
The GPI DMA engine driver can be compiled as a module, in which case the likely probe deferral "error" shows up in the kernel log. Switch to using dev_err_probe() to silence this warning and to ensure that "devices_deferred" in debugfs carries this information. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: imx: Implement errata ERR007805 or e7805 bus frequency limitMarek Vasut
The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q}, MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X are not affected. MX53 and older status is unknown, as the errata first appears in MX6 errata sheets from 2016 and the latest errata sheet for MX53 is from 2015. Older SoC errata sheets predate the MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata sheet is not available yet. " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " Implement the workaround by matching on the affected SoC specific compatible strings and by limiting the maximum bus frequency in case the SoC is affected. Signed-off-by: Marek Vasut <marex@denx.de> To: linux-i2c@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: pasemi: Wait for write xfers to finishMartin Povišer
Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15dm: fix bio length of empty flushShin'ichiro Kawasaki
The commit 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio") removed bio_clone_fast() call from alloc_tio() when ci->io->tio is available. In this case, ci->bio is not copied to ci->io->tio.clone. This is fine since init_clone_info() sets same values to ci->bio and ci->io->tio.clone. However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush() prepares a zero length bio on stack and set it to ci->bio. At this time, ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses this ci->io->tio.clone as the bio to map, it is passed to targets as non-empty flush bio. It causes bio length check failure in dm-zoned and unexpected operation such as dm_accept_partial_bio() call. To avoid the non-empty flush bio, set zero length to ci->io->tio.clone in __send_empty_flush(). Fixes: 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-15Merge tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Moving of lower_48_bits() to the block layer and a fix for the unaligned_be48 added with that originally (Alexander, Keith) - Fix a bad WARN_ON() for trim size checking (Ming) - A polled IO timeout fix for null_blk (Ming) - Silence IO error printing for dead disks (Christoph) - Compat mode range fix (Khazhismel) - NVMe pull request via Christoph: - Tone down the error logging added this merge window a bit (Chaitanya Kulkarni) - Quirk devices with non-unique unique identifiers (Christoph) * tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block: block: don't print I/O error warning for dead disks block/compat_ioctl: fix range check in BLKGETSIZE nvme-pci: disable namespace identifiers for Qemu controllers nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202 nvme: add a quirk to disable namespace identifiers nvme: don't print verbose errors for internal passthrough requests block: null_blk: end timed out poll request block: fix offset/size check in bio_trim() asm-generic: fix __get_unaligned_be48() on 32 bit platforms block: move lower_48_bits() to block
2022-04-15net: restore alpha order to Ethernet devices in configStephen Hemminger
The displayed list of Ethernet devices in make menuconfig has gotten out of order. This is mostly due to changes in vendor names etc, but also because of new Microsoft entry in wrong place. This restores so that the display is in order even if the names of the sub directories are not. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-14 This series contains updates to ice driver only. Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when ice_fill_rx_descs() does not return the entire buffer request and fixes a return value for !CONFIG_NET_SWITCHDEV configuration which was preventing VF creation. Wojciech prevents eswitch transmit when VFs are being removed which was causing NULL pointer dereference. Jianglei Nie fixes a memory leak on error path of getting OROM data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: phy: LAN937x: added PHY_POLL_CABLE_TEST flagArun Ramadoss
Added the phy_poll_cable_test flag for the lan937x phy driver. Tested using command - ethtool --cable-test <dev> Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15serial: 8250: Fix runtime PM for start_tx() for empty bufferTony Lindgren
Commit 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send") caused a regression where the drivers implementing runtime PM stopped idling. This is because serial8250_rpm_put_tx() is now unbalanced on early return, it normally gets called at __stop_tx(). Fixes: 932d596378b0 ("serial: 8250: Return early in .start_tx() if there are no chars to send") Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20220411111657.16744-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: imx: fix overrun interrupts in DMA modeJohan Hovold
Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") accidentally enabled overrun interrupts unconditionally when deferring DMA enable until after the receiver has been enabled during startup. Fix this by using the DMA-initialised instead of DMA-enabled flag to determine whether overrun interrupts should be enabled. Note that overrun interrupts are already accounted for in imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f ("serial: imx-serial - update RX error counters when DMA is used"). Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") Cc: stable@vger.kernel.org # 4.17 Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15serial: amba-pl011: do not time out prematurely when draining tx fifoLino Sanfilippo
The current timeout for draining the tx fifo in RS485 mode is calculated by multiplying the time it takes to transmit one character (with the given baud rate) with the maximal number of characters in the tx queue. This timeout is too short for two reasons: First when calculating the time to transmit one character integer division is used which may round down the result in case of a remainder of the division. Fix this by rounding up the division result. Second the hardware may need additional time (e.g for first putting the characters from the fifo into the shift register) before the characters are actually put onto the wire. To be on the safe side double the current maximum number of iterations that are used to wait for the queue draining. Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220408233503.7251-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix incorrect UA handlingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix reset fifo race conditionDaniel Starke
gsmtty_write() and gsm_dlci_data_output() properly guard the fifo access. However, gsm_dlci_close() and gsmtty_flush_buffer() modifies the fifo but do not guard this. Add a guard here to prevent race conditions on parallel writes to the fifo. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-17-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing tty wakeup in convergence layer type 2Daniel Starke
gsm_control_modem() informs the virtual tty that more data can be written after receiving a control signal octet via modem status command (MSC). However, gsm_dlci_data() fails to do the same after receiving a control signal octet from the convergence layer type 2 header. Add tty_wakeup() in gsm_dlci_data() for convergence layer type 2 to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-14-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong signal octets encoding in MSCDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. The value of the modem status command (MSC) frame contains an address field, control signal and optional break signal octet. The address field is encoded as described in chapter 5.2.1.2 with only one octet (may be extended to more in future versions of the standard). Whereas the control signal and break signal octet are always one byte each. This is strange at first glance as it makes the EA bit redundant. However, the same two octets are also encoded as header in convergence layer type 2 as described in chapter 5.5.2. No header length field is given and the only way to test if there is an optional break signal octet is via the EA flag which extends the control signal octet with a break signal octet. Now it becomes obvious how the EA bit for those two octets shall be encoded in the MSC frame. The current implementation treats the signal octet different for MSC frame and convergence layer type 2 header even though the standard describes it for both in the same way. Use the EA bit to encode the signal octets not only in the convergence layer type 2 header but also in the MSC frame in the same way with either 1 or 2 bytes in case of an optional break signal. Adjust the receiving path accordingly in gsm_control_modem(). Fixes: 3ac06b905655 ("tty: n_gsm: Fix for modems with brk in modem status control") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-13-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong command frame length field encodingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong command retry handlingDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing explicit ldisc flushDaniel Starke
In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong DLCI release orderDaniel Starke
The current DLCI release order starts with the control channel followed by the user channels. Reverse this order to keep the control channel open until all user channels have been released. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix insufficient txframe sizeDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix malformed counter for out of frame dataDaniel Starke
The gsm_mux field 'malformed' represents the number of malformed frames received. However, gsm1_receive() also increases this counter for any out of frame byte. Fix this by ignoring out of frame data for the malformed counter. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix frame reception handlingDaniel Starke
The frame checksum (FCS) is currently handled in gsm_queue() after reception of a frame. However, this breaks layering. A workaround with 'received_fcs' was implemented so far. Furthermore, frames are handled as such even if no end flag was received. Move FCS calculation from gsm_queue() to gsm0_receive() and gsm1_receive(). Also delay gsm_queue() call there until a full frame was received to fix both points. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2Daniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in convergence layer type 2 can be either one or two bytes. The length is encoded in the EA bit. This is set 1 for the last byte in the sequence. gsmtty_modem_update() handles this correctly but gsm_dlci_data_output() fails to set EA to 1. There is no case in which we encode two signal octets as there is no case in which we send out a break signal. Therefore, always set the EA bit to 1 for the signal octet to fix this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix mux cleanup after unregister tty deviceDaniel Starke
Internally, we manage the alive state of the mux channels and mux itself with the field member 'dead'. This makes it possible to notify the user if the accessed underlying link is already gone. On the other hand, however, removing the virtual ttys before terminating the channels may result in peer messages being received without any internal target. Move the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix this by keeping the virtual ttys open until the mux has been cleaned up. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix decoupled mux resourceDaniel Starke
The active mux instances are managed in the gsm_mux array and via mux_get() and mux_put() functions separately. This gives a very loose coupling between the actual instance and the gsm_mux array which manages it. It also results in unnecessary lockings which makes it prone to failures. And it creates a race condition if more than the maximum number of mux instances are requested while the user changes the parameters of an active instance. The user may loose ownership of the current mux instance in this case. Fix this by moving the gsm_mux array handling to the mux allocation and deallocation functions. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix restart handling via CLD commandDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to the non-multiplexed mode via a close-down message (CLD). The usual program flow is as following: - start multiplex mode by sending AT+CMUX to the mobile - establish the control channel (DLCI 0) - establish user channels (DLCI >0) - terminate user channels - send close-down message (CLD) - revert to AT protocol (i.e. leave multiplexed mode) The AT protocol is out of scope of the n_gsm driver. However, gsm_disconnect() sends CLD if gsm_config() detects that the requested parameters require the mux protocol to restart. The next immediate action is to start the mux protocol by opening DLCI 0 again. Any responder side which handles CLD commands correctly forces us to fail at this point because AT+CMUX needs to be sent to the mobile to start the mux again. Therefore, remove the CLD command in this phase and keep both sides in multiplexed mode. Remove the gsm_disconnect() function as it become unnecessary and merge the remaining parts into gsm_cleanup_mux() to handle the termination order and locking correctly. Fixes: 71e077915396 ("tty: n_gsm: do not send/receive in ldisc close path") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15tty: n_gsm: fix missing mux reset on config change at responderDaniel Starke
Currently, only the initiator resets the mux protocol if the user requests new parameters that are incompatible to those of the current connection. The responder also needs to reset the multiplexer if the new parameter set requires this. Otherwise, we end up with an inconsistent parameter set between initiator and responder. Revert the old behavior to inform the peer upon an incompatible parameter set change from the user on the responder side by re-establishing the mux protocol in such case. Fixes: 509067bbd264 ("tty: n_gsm: Delete gsm_disconnect when config requester") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220414094225.4527-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15nvme-pci: disable namespace identifiers for Qemu controllersChristoph Hellwig
Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-04-15nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202Christoph Hellwig
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: 金韬 <me@kingtous.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: 金韬 <me@kingtous.cn>
2022-04-15nvme: add a quirk to disable namespace identifiersChristoph Hellwig
Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair. The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-04-15nvme: don't print verbose errors for internal passthrough requestsChaitanya Kulkarni
Use the RQF_QUIET flag to skip the newly added verbose error reporting, and set the flag in __nvme_submit_sync_cmd, which is used for most internal passthrough requests where we do expect errors (e.g. due to probing for optional functionality). This is similar to what the SCSI verbose error logging does. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Alan Adamson <alan.adamson@oracle.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-04-14dm: allow dm_accept_partial_bio() for dm_io without duplicate biosMike Snitzer
The intent behind commit e6fc9f62ce6e ("dm: flag clones created by __send_duplicate_bios") was to formally disallow the use of dm_accept_partial_bio() where it simply isn't possible -- due to constraint that multiple bios cannot meaningfully update a shared tio->len_ptr. But that commit went too far and disallowed the case where "abormal" IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by not marking a dm_io with a single dm_target_io (and bio), that happens to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO. Also remove 'unsigned *len' parameter from alloc_multiple_bios(). This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned when a WRITE_ZEROES bio is issued. Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-14Merge tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Eggs season holidays are among us, and I think I'd expect some smaller pulls for two weeks then. This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I didn't see a misc pull this week, so I expect that will catch up next week. i915: - Correct legacy mmap disabling to use GRAPHICS_VER_FULL msm: - system suspend fix - kzalloc return checks - misc display fix - iommu_present removal amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix" * tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: remove dtbclk_ss compensation for dcn316 drm/amdgpu: Enable gfxoff quirk on MacBook Pro drm/amdgpu: Ensure HDA function is suspended before ASIC reset drm/amdgpu: fix VCN 3.1.2 firmware name drm/amd/display: don't ignore alpha property on pre-multiplied mode drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP drm/msm/dp: add fail safe mode outside of event_mutex context drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init() drm/msm: Stop using iommu_present() drm/msm/mdp5: check the return of kzalloc() drm/msm: Fix range size vs end confusion drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL drm/msm/dpu: Use indexed array initializer to prevent mismatches drm/msm/disp: check the return value of kzalloc() dt-bindings: display/msm: another fix for the dpu-qcm2290 example drm/msm: Add missing put_task_struct() in debugfs path drm/msm/gpu: Remove mutex from wait_event condition drm/msm/gpu: Park scheduler threads for system suspend drm/msm/gpu: Rename runtime suspend/resume functions
2022-04-14Merge tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe) * tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio: vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
2022-04-15Merge tag 'amd-drm-fixes-5.18-2022-04-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-13: amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com
2022-04-14Merge tag 'optee-fix-for-v5.18' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE fix missing mutex_destroy in probe error handling path * tag 'optee-fix-for-v5.18' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: add missing mutext_destroy in optee_ffa_probe Link: https://lore.kernel.org/r/20220413052001.GA49798@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 'imx-fixes-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.18: - Increase DOMAIN_MAX_CLKS in imx8m-blk-ctrl driver to fix an ISI hang on i.MX8MN. - Fix spi-tx-bus-width on imx8mq-tqma8mq board. - Fix an SGTL5000 detection issue by moving MCLK pinctrl into SGTL5000 codec node. - Fix spi2 pin configuration on imx8mm-venice board. - Fix SCU clock controller's compatible property for i.MX8QM. - Fix SAI device compatible for i.MX8MN. - A couple of fixes from Rob to address issues in boolean properties and touchscreen property sizes. - Fix OTG controller over-current configuration for imx8mm-venice-gw boards. - Fix NULL but dereferenced coccicheck error in imx-weim driver. * tag 'imx-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes ARM: dts: imx: Fix boolean properties with values ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode arm64: dts: imx8mn: Fix SAI nodes arm64: dts: imx8mq-tqma8mq: change the spi-nor tx ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue soc: imx: imx8m-blk-ctrl: Fix IMX8MN_DISPBLK_PD_ISI hang arm64: dts: imx8qm: Correct SCU clock controller's compatible property arm64: dts: imx8mm-venice: fix spi2 pin configuration bus: imx-weim: fix NULL but dereferenced coccicheck error Link: https://lore.kernel.org/r/20220411024301.GH129381@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 'net-5.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter. Current release - regressions: - smc: fix af_ops of child socket pointing to released memory - wifi: ath9k: fix usage of driver-private space in tx_info Previous releases - regressions: - ipv6: fix panic when forwarding a pkt with no in6 dev - sctp: use the correct skb for security_sctp_assoc_request - smc: fix NULL pointer dereference in smc_pnet_find_ib() - sched: fix initialization order when updating chain 0 head - phy: don't defer probe forever if PHY IRQ provider is missing - dsa: revert "net: dsa: setup master before ports" - dsa: felix: fix tagging protocol changes with multiple CPU ports - eth: ice: - fix use-after-free when freeing @rx_cpu_rmap - revert "iavf: fix deadlock occurrence during resetting VF interface" - eth: lan966x: stop processing the MAC entry is port is wrong Previous releases - always broken: - sched: - flower: fix parsing of ethertype following VLAN header - taprio: check if socket flags are valid - nfc: add flush_workqueue to prevent uaf - veth: ensure eth header is in skb's linear part - eth: stmmac: fix altr_tse_pcs function when using a fixed-link - eth: macb: restart tx only if queue pointer is lagging - eth: macvlan: fix leaking skb in source mode with nodst option" * tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies net: dsa: felix: fix tagging protocol changes with multiple CPU ports tun: annotate access to queue->trans_start nfc: nci: add flush_workqueue to prevent uaf net: dsa: realtek: don't parse compatible string for RTL8366S net: dsa: realtek: fix Kconfig to assure consistent driver linkage net: ftgmac100: access hardware register after clock ready Revert "net: dsa: setup master before ports" macvlan: Fix leaking skb in source mode with nodst option netfilter: nf_tables: nft_parse_register can return a negative value net: lan966x: Stop processing the MAC entry is port is wrong. net: lan966x: Fix when a port's upper is changed. net: lan966x: Fix IGMP snooping when frames have vlan tag net: lan966x: Update lan966x_ptp_get_nominal_value sctp: Initialize daddr on peeled off socket net/smc: Fix af_ops of child socket pointing to released memory net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() net/smc: use memcpy instead of snprintf to avoid out of bounds read net: macb: Restart tx only if queue pointer is lagging ...
2022-04-14block: null_blk: end timed out poll requestMing Lei
When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler. Fixes: 0a593fbbc245 ("null_blk: poll queue support") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220413084836.1571995-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14USB: quirks: add STRING quirk for VCOM deviceOliver Neukum
This has been reported to stall if queried Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14USB: quirks: add a Realtek card readerOliver Neukum
This device is reported to stall when enummerated. Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14ice: Fix memory leak in ice_get_orom_civd_data()Jianglei Nie
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: fix crash in switchdev modeWojciech Drewek
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a663f ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: allow creating VFs for !CONFIG_NET_SWITCHDEVMaciej Fijalkowski
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <grzegorz.nitka@intel.com> Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
2022-04-14gpio: sim: fix setting and getting multiple linesBartosz Golaszewski
We need to take mask into account in the set/get_multiple() callbacks. Use bitmap_replace() instead of bitmap_copy(). Fixes: cb8c474e79be ("gpio: sim: new testing module") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 14:12:29 +0000