| Age | Commit message (Collapse) | Author |
|---|
|
When the device tree has 2 CPU ports defined, a single one is active
(has any dp->cpu_dp pointers point to it). Yet the second one is still a
CPU port, and DSA still calls ->change_tag_protocol on it.
On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the
active CPU port and port 5 is inactive.
After the following commands:
# Initial setting
cat /sys/class/net/eno2/dsa/tagging
ocelot
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo ocelot > /sys/class/net/eno2/dsa/tagging
traffic is now broken, because the driver has moved the NPI port from
port 4 to port 5, unbeknown to DSA.
The problem can be avoided by detecting that the second CPU port is
unused, and not doing anything for it. Further rework will be needed
when proper support for multiple CPU ports is added.
Treat this as a bug and prepare current kernels to work in single-CPU
mode with multiple-CPU DT blobs.
Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to the sc7180 commit, let's drop the IP0 interconnects here
because the IP0 resource is also used in the clk-rpmh driver on sdx55.
It's bad to have the clk framework and interconnect framework control
the same RPMh resource without any coordination. The rpmh driver in the
kernel doesn't aggregate resources between clients either, so leaving
control to clk-rpmh avoids any issues with unused interconnects turning
off IP0 behind the back of the clk framework.
Cc: Alex Elder <elder@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver
in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and
modeled as a clk, but this interconnect driver still had it modeled as
an interconnect. This was mostly OK because nobody used the interconnect
definition, until the interconnect framework started dropping bandwidth
requests on interconnects that aren't used via the sync_state callback
in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once
that patch was applied the IP0 resource was going to be controlled from
two places, the clk framework and the interconnect framework.
Even then, things were probably going to be OK, because commit
b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in
pre_aggregate") was needed to actually drop bandwidth requests on unused
interconnects, of which the IPA was one of the interconnect that wasn't
getting dropped to zero. Combining the three commits together leads to
bad behavior where the interconnect framework is disabling the IP0
resource because it has no users while the clk framework thinks the IP0
resource is on because the only user, the IPA driver, has turned it on
via clk_prepare_enable(). Depending on when sync_state is called, we can
get into a situation like below:
IPA driver probes
IPA driver gets notified modem started
runtime PM get()
IPA clk enabled -> IP0 resource is ON
sync_state runs
interconnect zeroes out the IP0 resource -> IP0 resource is off
IPA driver tries to access a register and blows up
The crash is an unclocked access that manifest as an SError.
SError Interrupt on CPU0, code 0xbe000011 -- SError
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x4c/0x80
lr : mutex_lock+0x30/0x80
sp : ffffffc00da9b9c0
x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000
x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000
x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8
x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00
x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000
x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080
x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28
x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166
Hardware name: Google Lazor (rev1 - 2) with LTE (DT)
Call trace:
dump_backtrace+0xf4/0x114
show_stack+0x24/0x30
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
panic+0x150/0x38c
nmi_panic+0x88/0xa0
arm64_serror_panic+0x74/0x80
do_serror+0x0/0x80
do_serror+0x58/0x80
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x78/0x7c
mutex_lock+0x4c/0x80
__gsi_channel_start+0x50/0x17c
gsi_channel_start+0x54/0x90
ipa_endpoint_enable_one+0x34/0xc0
ipa_open+0x4c/0x120
Remove all IP0 resource management from the interconnect driver so that
clk-rpmh is the sole owner. This fixes the issue by preventing the
interconnect driver from overwriting the IP0 resource data that the
clk-rpmh driver wrote.
Cc: Alex Elder <elder@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180")
Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Commit 5337824f4dc4 ("net: annotate accesses to queue->trans_start")
introduced a new helper, txq_trans_cond_update, to update
queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c
was missed, as it was introduced roughly at the same time.
Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().
Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Some msm fixes for v5.18.
kzalloc return checks, display fix, misc locking and scheduler bug, iommu present removal.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvuTwx09MKwK68KWXqi4o7LxDGMUz1=Z7xOS+i=OV84Ug@mail.gmail.com
|
|
[why]
dcn316's dtbclk is from non_ss clock source.
no compensation required here.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enabling gfxoff quirk results in perfectly usable graphical user
interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB.
Without the quirk, X server is completely unusable as every few seconds
there is gpu reset due to ring gfx timeout.
Signed-off-by: Tomasz Moń <desowin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
DP/HDMI audio on AMD PRO VII stops working after S3:
[ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset
[ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset
[ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset
[ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot
[ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot
...
[ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535
The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in
suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for
reset in S3 ") doesn't help, so the issue is something different.
Assuming that to make HDA resume to D0 fully realized, it needs to be
successfully put to D3 first. And this guesswork proves working, by
moving amdgpu_asic_reset() to noirq callback, so it's called after HDA
function is in D3.
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Drop the trailing vcn.
Fixes: afc2f276057ea1 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2")
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as
documented in supported_modes of drm_plane_create_blend_mode_property():
https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c
In this mode, both 'pixel alpha' and 'plane alpha' participate in the
calculation, as described by the pixel blend mode formula in KMS/DRM
documentation:
out.rgb = plane_alpha * fg.rgb +
(1 - (plane_alpha * fg.alpha)) * bg.rgb
Considering the blend config mechanisms we have in the driver so far,
the alpha mode that better fits this blend mode is the
_PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain
is the plane alpha (global_alpha).
With this change, alpha property stops to be ignored. It also addresses
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734
v2:
* keep the 8-bit value for global_alpha_value (Nicholas)
* correct the logical ordering for combined global gain (Nicholas)
* apply to dcn10 too (Nicholas)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
get_pf_vdev() tries to check if a PF is a VFIO PF by looking at the driver:
if (pci_dev_driver(physfn) != pci_dev_driver(vdev->pdev)) {
However now that we have multiple VF and PF drivers this is no longer
reliable.
This means that security tests realted to vf_token can be skipped by
mixing and matching different VFIO PCI drivers.
Instead of trying to use the driver core to find the PF devices maintain a
linked list of all PF vfio_pci_core_device's that we have called
pci_enable_sriov() on.
When registering a VF just search the list to see if the PF is present and
record the match permanently in the struct. PCI core locking prevents a PF
from passing pci_disable_sriov() while VF drivers are attached so the VFIO
owned PF becomes a static property of the VF.
In common cases where vfio does not own the PF the global list remains
empty and the VF's pointer is statically NULL.
This also fixes a lockdep splat from recursive locking of the
vfio_group::device_lock between vfio_device_get_from_name() and
vfio_device_get_from_dev(). If the VF and PF share the same group this
would deadlock.
Fixes: ff53edf6d6ab ("vfio/pci: Split the pci_driver code out of vfio_pci_core.c")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v3-876570980634+f2e8-vfio_vf_token_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Commit 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface") changed
the alloc_io() function to delay the initialization of struct dm_io's
orig_bio member, leaving it NULL until after the dm_io and associated
user submitted bio is processed by __split_and_process_bio(). This
change causes a NULL pointer dereference in dm_zone_map_bio() when the
original user bio is inspected to detect the need for zone append
command emulation.
Fix this NULL pointer by updating dm_zone_map_bio() to not access
->orig_bio when the same info can be accessed from the clone of the
->orig_bio _before_ any ->map processing. Save off the bio_op() and
bio_sectors() for the clone and then use the saved orig_bio_details as
needed.
Fixes: 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface")
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Mixing sched_clock() and ktime_get_ns() usage will give bad results.
Switch hst_select_path() from using sched_clock() to ktime_get_ns().
Also rename path_service_time()'s 'sched_now' variable to 'now'.
Fixes: 2613eab11996 ("dm mpath: add Historical Service Time Path Selector")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
It is possible to set up dm-integrity in such a way that the
"tag_size" parameter is less than the actual digest size. In this
situation, a part of the digest beyond tag_size is ignored.
In this case, dm-integrity would write beyond the end of the
ic->recalc_tags array and corrupt memory. The corruption happened in
integrity_recalc->integrity_sector_checksum->crypto_shash_final.
Fix this corruption by increasing the tags array so that it has enough
padding at the end to accomodate the loop in integrity_recalc() being
able to write a full digest size for the last member of the tags
array.
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.
Scaling is represented as:
scale 0 - 1 (2^(5*0)) = 2^0
scale 1 - 32 (2^(5 *1))= 2^5
scale 2 - 1024 (2^(5 *2)) =2^10
scale 3 - 32768 (2^(5 *3)) =2^15
scale 4 - 1048576 (2^(5 *4)) = 2^20
scale 5 - 33554432 (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.
Replace the u16 type with the u32 type and allow corrected LTR
representation.
Cc: stable@vger.kernel.org
Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Some mainboard/CPU combinations, in particular, Alder Lake-S with a
W680 mainboard, have shown problems (system hangs usually, no kernel
logs) with suspend/resume when PCIe PTM is enabled and active. In some
cases, it could be reproduced when removing the igc module.
The best we can do is to stop PTM dialogs from the downstream/device
side before the interface is brought down. PCIe PTM will be re-enabled
when the interface is being brought up.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use the spi_mem_default_supports_op() core helper in order to take into
account the buswidth specified by the user in device tree.
Cc: <stable@vger.kernel.org>
Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220406133604.455356-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace usleep_range() method with udelay() method to allow atomic contexts
in low-level MDIO access functions.
The following issue can be seen by doing the following:
$ modprobe -r bonding
$ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0
$ ip link set bond0 up
$ ifenslave bond0 eth0 eth1
[ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002
[ 982.364431] INFO: lockdep is turned off.
[ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding]
[ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1
[ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017
[ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding]
[ 982.465622] Call Trace:
[ 982.468355] dump_stack+0x8e/0xd0
[ 982.472056] __schedule_bug.cold.60+0x3a/0x60
[ 982.476919] __schedule+0x147b/0x1bc0
[ 982.481007] ? firmware_map_remove+0x16b/0x16b
[ 982.485967] ? hrtimer_fixup_init+0x40/0x40
[ 982.490625] schedule+0xd9/0x250
[ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0
[ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130
[ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90
[ 982.511332] ? usleep_range+0x88/0x130
[ 982.515514] ? recalibrate_cpu_khz+0x10/0x10
[ 982.520279] ? ktime_get+0xab/0x1c0
[ 982.524175] ? usleep_range+0x88/0x130
[ 982.528355] usleep_range+0xdd/0x130
[ 982.532344] ? console_conditional_schedule+0x30/0x30
[ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc]
[ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc]
[ 982.548887] igc_phy_has_link+0xfa/0x260 [igc]
[ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc]
[ 982.558894] ? lock_acquire+0x34d/0x890
[ 982.563187] ? lock_downgrade+0x710/0x710
[ 982.567659] ? rcu_read_unlock+0x50/0x50
[ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc]
[ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc]
[ 982.584286] ? rcu_read_unlock+0x50/0x50
[ 982.588661] ? lock_release+0x591/0xb80
[ 982.592939] ? lock_release+0x591/0xb80
[ 982.597220] igc_has_link+0x113/0x330 [igc]
[ 982.601887] ? lock_downgrade+0x710/0x710
[ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc]
[ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding]
[ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding]
[ 982.623277] ? rcu_read_lock_held+0x62/0xc0
[ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0
[ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding]
[ 982.638738] ? lock_contended+0x880/0x880
[ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding]
[ 982.649336] ? lock_acquire+0x34d/0x890
[ 982.653615] ? lock_downgrade+0x710/0x710
[ 982.658089] ? debug_object_deactivate+0x221/0x340
[ 982.663436] ? rcu_read_unlock+0x50/0x50
[ 982.667811] ? debug_print_object+0x2b0/0x2b0
[ 982.672672] ? __switch_to_asm+0x41/0x70
[ 982.677049] ? __switch_to_asm+0x35/0x70
[ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40
[ 982.686288] ? trace_hardirqs_on+0x20/0x195
[ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40
[ 982.695818] process_one_work+0x8f0/0x1770
[ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320
[ 982.705443] ? debug_show_held_locks+0x50/0x50
[ 982.710403] worker_thread+0x87/0xb40
[ 982.714489] ? process_one_work+0x1770/0x1770
[ 982.719349] kthread+0x344/0x410
[ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0
[ 982.728975] ret_from_fork+0x3a/0x50
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.
Fixes: c0071c7aa5fe ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since the conversion to spi-mem, the driver advertised support for
various operations that cqspi_set_protocol() was never expected to handle
correctly - in particuar all non-DTR operations with command or address
buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as
cqspi_set_protocol() returns -EINVAL.
In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that
support such operations. As a minimal fix that can be backported to stable
kernels, simply disallow the unsupported operations again to avoid this
issue.
Fixes: a314f6367787 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220406132832.199777-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.
Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel test robot reported a build failure:
or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'
... with the following build configuration:
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m
The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.
The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.
Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:
1. The interface drivers' Kconfig symbols must have a value no greater
than the value of any subdriver Kconfig symbols.
2. The subdrivers should by default enable both interface drivers, since
most users probably want at least one of them; those interface
drivers can be explicitly disabled however.
What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.
Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Intel Raptor Lake-S has the same SPI serial flash controller as Alder
Lake-P. Add Raptor Lake-S PCI ID to the driver list of supported
devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220411112116.53281-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some implementations were returning type `unsigned long`, while others
that fell back to get_cycles() were implicitly returning a `cycles_t` or
an untyped constant int literal. That makes for weird and confusing
code, and basically all code in the kernel already handled it like it
was an `unsigned long`. I recently tried to handle it as the largest
type it could be, a `cycles_t`, but doing so doesn't really help with
much.
Instead let's just make random_get_entropy() return an unsigned long all
the time. This also matches the commonly used `arch_get_random_long()`
function, so now RDRAND and RDTSC return the same sized integer, which
means one can fallback to the other more gracefully.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than failing entirely if a copy_to_user() fails at some point,
instead we should return a partial read for the amount that succeeded
prior, unless none succeeded at all, in which case we return -EFAULT as
before.
This makes it consistent with other reader interfaces. For example, the
following snippet for /dev/zero outputs "4" followed by "1":
int fd;
void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
assert(x != MAP_FAILED);
fd = open("/dev/zero", O_RDONLY);
assert(fd >= 0);
printf("%zd\n", read(fd, x, 4));
printf("%zd\n", read(fd, x + 4095, 4));
close(fd);
This brings that same standard behavior to the various RNG reader
interfaces.
While we're at it, we can streamline the loop logic a little bit.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled. Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved. To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.
Fixes: 137d23cea1c0 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.
When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.
Properly free the skb when consuming packets to fix that leak.
Fixes: 427f0c8c194b ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.
Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Otherwise power_supply_get_battery_info always returns -ENODEV
on devices that do not have a static battery, even when a simple
battery is found.
Fixes: c8aee3f41cb8 ("power: supply: Static data for Samsung batteries")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Two of the batteries were missing charging restart voltages,
meaning they can drain if the algorithm relies on restarting
charging at this voltage. Fix it up.
Fixes: c8aee3f41cb8 ("power: supply: Static data for Samsung batteries")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.
Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Shared is the opposite of write/exclusive.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 0597ca7b43e4 ("drm/radeon: use new iterator in radeon_sync_resv")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1970
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412093626.608767-1-christian.koenig@amd.com
|
|
It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.
So let's flush the recovery worker before trying to powerdown the device.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.
So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support
AST2600 FW SPI quad mode. These pins can be used with dedicated FW
SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14)
and FWSPIMISO (AB13).
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl. These pins must be used with the FWSPI
pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.
Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a regression fix for si2157
- a Kconfig dependency fix for imx-mipi-csis
- fix the rockchip/rga driver probing logic
* tag 'media/v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: si2157: unknown chip version Si2147-A30 ROM 0x50
media: platform: imx-mipi-csis: Add dependency on VIDEO_DEV
media: rockchip/rga: do proper error checking in probe
|
|
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
For wmfw format v2 and later the coefficient name strings have a length
field and are NOT null-terminated. Use kasprintf() to convert the
unterminated string into a null-terminated string in an allocated buffer.
The previous code handled this duplication incorrectly using kmemdup()
and getting the length from a strlen() of the (unterminated) source string.
This resulted in creating a string that continued up to the next byte in
the firmware file that just happened to be 0x00.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://lore.kernel.org/r/20220412163927.1303470-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After system resumes, the registers of nor controller are
initialized with default values. The nor controller will
not function properly.
To handle both issues above, we add mtk_nor_init() in
mtk_nor_resume after pm_runtime_force_resume().
Fixes: 3bfd9103c7af ("spi: spi-mtk-nor: Add power management support")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220412115743.22641-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The referenced commit generates a reference counting error if the rkey has
the same index but the wrong key. In this case the reference taken by
rxe_pool_get_index() is not dropped.
Drop the reference if the keys don't match in rxe_recheck_mr(). Check
that the mw and mr are still valid.
Fixes: 8a1a0be894da ("RDMA/rxe: Replace mr by rkey in responder resources")
Link: https://lore.kernel.org/r/20220411030647.20011-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
On some arch (ie aarch64 iMX8MM) unaligned PCIe accesses are
not allowed and lead to a kernel Oops.
[ 1911.668835] Unable to handle kernel paging request at virtual address ffff80001bc00a8c
[ 1911.668841] Mem abort info:
[ 1911.668844] ESR = 0x96000061
[ 1911.668847] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1911.668850] SET = 0, FnV = 0
[ 1911.668852] EA = 0, S1PTW = 0
[ 1911.668853] Data abort info:
[ 1911.668855] ISV = 0, ISS = 0x00000061
[ 1911.668857] CM = 0, WnR = 1
[ 1911.668861] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000040ff4000
[ 1911.668864] [ffff80001bc00a8c] pgd=00000000bffff003, pud=00000000bfffe003, pmd=0068000018400705
[ 1911.668872] Internal error: Oops: 96000061 [#1] PREEMPT SMP
...
The llp register present in the channel group registers is not
aligned on 64bit.
Fix unaligned 64bit access using two 32bit accesses
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220225120252.309404-1-herve.codina@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
mtk_uart_apdma_alloc_chan_resources
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it:
1) Replacing it with pm_runtime_resume_and_get to keep usage counter
balanced.
2) Add putting operation before returning error.
Fixes:9135408c3ace4 ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319022142.142709-1-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On beagleboard revisions A to B4 we need to use gpt12 as the system timer.
However, the quirk handling added for gpt12 caused a regression for system
suspend for am335x as the PM coprocessor needs the timers idled for
suspend.
Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need
it. Beagleboard revisions C and later no longer need to use the gpt12
related quirk. Then at some point, if we decide to drop support for the old
beagleboard revisions A to B4, we can also drop the gpt12 related quirks
completely.
Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Suggested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
As of commit 0fe66f327c464943 ("fbdev/sh_mobile: remove
sh_mobile_lcdc_display_notify"), there is no longer a need for a foward
declaration of sh_mobile_lcdc_check_var().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
- Documentation and compilation warning fixes
- Kconfig dep fixes
- Misc small code cleanups
* tag 'platform-drivers-x86-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: amd-pmc: Fix compilation without CONFIG_SUSPEND
platform/x86: acerhdf: Cleanup str_starts_with()
Documentation/ABI: sysfs-class-firmware-attributes: Misc. cleanups
Documentation/ABI: sysfs-class-firmware-attributes: Fix Sphinx errors
Documentation/ABI: sysfs-driver-intel_sdsi: Fix sphinx warnings
platform/x86: barco-p50-gpio: Fix duplicate included linux/io.h
platform/x86: samsung-laptop: Fix an unsigned comparison which can never be negative
platform/x86: think-lmi: certificate support clean ups
|
|
Currently when getting a new MAC is learn, the HW generates an
interrupt. So then the SW will check the new entry and checks if it
arrived on a correct port. If it didn't just generate a warning.
But this could still crash the system. Therefore stop processing that
entry when an issue is seen.
Fixes: 5ccd66e01cbef8 ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
