summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-17octeontx2-pf: Fix otx2_get_fecparam()Dan Carpenter
Static checkers complained about an off by one read overflow in otx2_get_fecparam() and we applied two conflicting fixes for it. Correct: b0aae0bde26f ("octeontx2: Fix condition.") Wrong: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Revert the incorrect fix. Fixes: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17cteontx2-pf: cn10k: Prevent harmless double shift bugsDan Carpenter
These defines are used with set_bit() and test_bit() which take a bit number. In other words, the code is doing: if (BIT(BIT(1)) & pf->hw.cap_flag) { This was done consistently so it did not cause a problem at runtime but it's still worth fixing. Fixes: facede8209ef ("octeontx2-pf: cn10k: Add mbox support for CN10K") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: Add PCI bus info to ethtool driver query outputWong Vee Khee
This patch populates the PCI bus info in the ethtool driver query data. Users will be able to view PCI bus info using 'ethtool -i <interface>'. Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessaryVincent Cheng
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.Vincent Cheng
Code clean-up. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.Vincent Cheng
Code clean-up. * Remove blank line between variable declarations. * Remove blank line between: err = blah(...) if (err) ... * Remove unnecessary blank line before/after loop constructs. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Clean-up dev_*() messages.Vincent Cheng
Code clean-up. * Remove unnecessary \n termination from dev_*() messages. * Remove 'char *fmt' to define strings to stay within 80 column limit. Not needed since coding guidelines increased to 100 columns limit. Keeping format in place allows static code checkers to validate the arguments. * Tighten up vertical spacing. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Remove unused header declarations.Vincent Cheng
Removed unused header declarations. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.Vincent Cheng
When enabling output using PTP_CLK_REQ_PEROUT, need to align the output clock to the internal 1 PPS clock. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.Vincent Cheng
Part of the device initialization aligns the rising edge of the output clock to the internal 1 PPS clock. If the system APLL and DPLL is not locked, then the alignment will fail and there will be a fixed offset between the internal 1 PPS clock and the output clock. After loading the device firmware, poll the system APLL and DPLL for locked state prior to initialization, timing out after 2 seconds. Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Add a shutdown callbackSamuel Holland
The Ethernet MAC and PHY are usually major consumers of power on boards which may not be able to fully power off (those with no PMIC). Powering down the MAC and internal PHY saves power while these boards are "off". Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Minor probe function cleanupSamuel Holland
Adjust the spacing and use an explicit "return 0" in the success path to make the function easier to parse. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Use reset_control_resetSamuel Holland
Use the appropriate function instead of reimplementing it, and update the error message to match the code. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Remove unnecessary PHY power checkSamuel Holland
sun8i_dwmac_unpower_internal_phy already checks if the PHY is powered, so there is no need to do it again here. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Return void from PHY unpowerSamuel Holland
This is a deinitialization function that always returned zero, and that return value was always ignored. Have it return void instead. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17r8169: use macro pm_ptrHeiner Kallweit
Use macro pm_ptr(), this helps to avoid some ifdeffery. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: mdio: Remove of_phy_attach()Florian Fainelli
We have no in-tree users, also update the sfp-phylink.rst documentation to indicate that phy_attach_direct() is used instead of of_phy_attach(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: mscc: ocelot: select PACKING in the KconfigVladimir Oltean
Ocelot now uses include/linux/dsa/ocelot.h which makes use of CONFIG_PACKING to pack/unpack bits into the Injection/Extraction Frame Headers. So it needs to explicitly select it, otherwise there might be build errors due to the missing dependency. Fixes: 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
2021-02-17Merge remote-tracking branch 'asoc/for-5.12' into asoc-linusMark Brown
2021-02-17HID: playstation: fix array size comparison (off-by-one)Colin Ian King
The comparison of value with the array size ps_gamepad_hat_mapping appears to be off-by-one. Fix this by using >= rather than > for the size comparison. Addresses-Coverity: ("Out-of-bounds read") Fixes: bc2e15a9a022 ("HID: playstation: initial DualSense USB support.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-02-17thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on errorViresh Kumar
freq_qos_update_request() returns 1 if the effective constraint value has changed, 0 if the effective constraint value has not changed, or a negative error code on failures. The frequency constraints for CPUs can be set by different parts of the kernel. If the maximum frequency constraint set by other parts of the kernel are set at a lower value than the one corresponding to cooling state 0, then we will never be able to cool down the system as freq_qos_update_request() will keep on returning 0 and we will skip updating cpufreq_state and thermal pressure. Fix that by doing the updates even in the case where freq_qos_update_request() returns 0, as we have effectively set the constraint to a new value even if the consolidated value of the actual constraint is unchanged because of external factors. Cc: v5.7+ <stable@vger.kernel.org> # v5.7+ Reported-by: Thara Gopinath <thara.gopinath@linaro.org> Fixes: f12e4f66ab6a ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Thara Gopinath<thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/b2b7e84944937390256669df5a48ce5abba0c1ef.1613540713.git.viresh.kumar@linaro.org
2021-02-17HID: playstation: fix unused variable in ps_battery_get_property.Roderick Colenbrander
The ret variable in ps_battery_get_property is set in an error path, but never actually returned. Change the function to return ret. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-02-17HID: playstation: report DualSense hardware and firmware version.Roderick Colenbrander
Retrieve DualSense hardware and firmware information using a vendor specific feature report. Report the data through sysfs and also report using hid_info as there can be signficant differences between versions. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2021-02-17Merge tag 'v5.11' into sched/core, to pick up fixes & refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-17drm/i915/gt: Correct surface base address for renderclearChris Wilson
The surface_state_base is an offset into the batch, so we need to pass the correct batch address for STATE_BASE_ADDRESS. Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20210210122728.20097-1-chris@chris-wilson.co.uk (cherry picked from commit 1914911f4aa08ddc05bae71d3516419463e0c567) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-02-17drm/i915: Disallow plane x+w>stride on ilk+ with X-tilingVille Syrjälä
ilk+ planes get notably unhappy when the plane x+w exceeds the stride. This wasn't a problem previously because we always aligned SURF to the closest tile boundary so the x offset never got particularly large. But now with async flips we have to align to 256KiB instead and thus this becomes a real issue. On ilk/snb/ivb it looks like the accesses just wrap early to the next tile row when scanout goes past the SURF+n*stride boundary, hsw/bdw suffer more heavily and start to underrun constantly. i965/g4x appear to be immune. vlv/chv I've not yet checked. Let's borrow another trick from the skl+ code and search backwards for a better SURF offset in the hopes of getting the x offset below the limit. IIRC when I ran into a similar issue on skl years ago it was causing the hardware to fall over pretty hard as well. And let's be consistent and include i965/g4x in the check as well, just in case I just got super lucky somehow when I wasn't able to reproduce the issue. Not that it really matters since we still use 4k SURF alignment for i965/g4x anyway. Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv") Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb") Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 59fb8218c8e5001f854e7d5fdb5fb135cba58102) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo also exported some functions from intel_display.c during backport]
2021-02-16net: re-solve some conflicts after net -> net-next mergeJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-16RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()Jack Wang
smatch gives the warning: drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR' Which is trying to say smatch has shown that srv is not an error pointer and thus cannot be passed to PTR_ERR. The solution is to move the list_add() down after full initilization of rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the list operation as suggested by Leon. Fixes: 03e9b33a0fd6 ("RDMA/rtrs: Only allow addition of path to an already established session") Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodesNicolas Morey-Chaisemartin
The current code computes a number of channels per SRP target and spreads them equally across all online NUMA nodes. Each channel is then assigned a CPU within this node. In the case of unbalanced, or even unpopulated nodes, some channels do not get a CPU associated and thus do not get connected. This causes the SRP connection to fail. This patch solves the issue by rewriting channel computation and allocation: - Drop channel to node/CPU association as it had no real effect on locality but added unnecessary complexity. - Tweak the number of channels allocated to reduce CPU contention when possible: - Up to one channel per CPU (instead of up to 4 by node) - At least 4 channels per node, unless ch_count module parameter is used. Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16net: phy: broadcom: Do not modify LED configuration for SFP module PHYsRobert Hancock
bcm54xx_config_init was modifying the PHY LED configuration to enable link and activity indications. However, some SFP modules (such as Bel-Fuse SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS signal, and modifying the LED settings will cause the LOS output to malfunction. Skip this configuration for PHYs which are bound to an SFP bus. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: Add is_on_sfp_module flag and phy_on_sfp helperRobert Hancock
Add a flag and helper function to indicate that a PHY device is part of an SFP module, which is set on attach. This can be used by PHY drivers to handle SFP-specific quirks or behavior. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616SRobert Hancock
The default configuration for the BCM54616S PHY may not match the desired mode when using 1000BaseX or SGMII interface modes, such as when it is on an SFP module. Add code to explicitly set the correct mode using programming sequences provided by Bel-Fuse: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: sync only the received area of an rx ring bufferSven Van Asbroeck
On cpu architectures w/o dma cache snooping, dma_unmap() is a is a very expensive operation, because its resulting sync needs to invalidate cpu caches. Increase efficiency/performance by syncing only those sections of the lan743x's rx ring buffers that are actually in use. Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: boost performance on cpu archs w/o dma cache snoopingSven Van Asbroeck
The buffers in the lan743x driver's receive ring are always 9K, even when the largest packet that can be received (the mtu) is much smaller. This performs particularly badly on cpu archs without dma cache snooping (such as ARM): each received packet results in a 9K dma_{map|unmap} operation, which is very expensive because cpu caches need to be invalidated. Careful measurement of the driver rx path on armv7 reveals that the cpu spends the majority of its time waiting for cache invalidation. Optimize by keeping the rx ring buffer size as close as possible to the mtu. This limits the amount of cache that requires invalidation. This optimization would normally force us to re-allocate all ring buffers when the mtu is changed - a disruptive event, because it can only happen when the network interface is down. Remove the need to re-allocate all ring buffers by adding support for multi-buffer frames. Now any combination of mtu and ring buffer size will work. When the mtu changes from mtu1 to mtu2, consumed buffers of size mtu1 are lazily replaced by newly allocated buffers of size mtu2. These optimizations double the rx performance on armv7. Third parties report 3x rx speedup on armv8. Tested with iperf3 on a freescale imx6qp + lan7430, both sides set to mtu 1500 bytes, measure rx performance: Before: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0 After: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: enetc: fix destroyed phylink dereference during unbindVladimir Oltean
The following call path suggests that calling unregister_netdev on an interface that is up will first bring it down. enetc_pf_remove -> unregister_netdev -> unregister_netdevice_queue -> unregister_netdevice_many -> dev_close_many -> __dev_close_many -> enetc_close -> enetc_stop -> phylink_stop However, enetc first destroys the phylink instance, then calls unregister_netdev. This is already dissimilar to the setup (and error path teardown path) from enetc_pf_probe, but more than that, it is buggy because it is invalid to call phylink_stop after phylink_destroy. So let's first unregister the netdev (and let the .ndo_stop events consume themselves), then destroy the phylink instance, then free the netdev. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Implement mqprio supportMaxime Chevallier
Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. The TX logic stays the same as when we don't offload the qdisc. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Remove per-cpu queue mapping for Armada 3700Maxime Chevallier
According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'mlx5-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== pull-request: mlx5-next 2021-02-16 The patches in this pr are already submitted and reviewed through the netdev and rdma mailing lists. The series includes mlx5 HW bits and definitions for mlx5 real time clock translation and handling in the mlx5 driver clock module to enable and support such mode [1] [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210212223042.449816-7-saeed@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16drivers: net: xilinx_emaclite: remove arch limitationGary Guo
The changes made in eccd540 is enough for xilinx_emaclite to run without problem on 64-bit systems. I have tested it on a Xilinx FPGA with RV64 softcore. The architecture limitation in Kconfig seems no longer necessary. A small change is included to print address with %lx instead of casting to int and print with %x. Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: dsa: felix: Add support for MRPHoratiu Vultur
Implement functions 'port_mrp_add', 'port_mrp_del', 'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp functions from ocelot. Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ will be forward by the SW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mscc: ocelot: Add support for MRPHoratiu Vultur
Add basic support for MRP. The HW will just trap all MRP frames on the ring ports to CPU and allow the SW to process them. In this way it is possible to for this node to behave both as MRM and MRC. Current limitations are: - it doesn't support Interconnect roles. - it supports only a single ring. - the HW should be able to do forwarding of MRP Test frames so the SW will not need to do this. So it would be able to have the role MRC without SW support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: marvell: Ensure SGMII auto-negotiation is enabled for 88E1111Robert Hancock
When 88E1111 is operating in SGMII mode, auto-negotiation should be enabled on the SGMII side so that the link will come up properly with PCSes which normally have auto-negotiation enabled. This is normally the case when the PHY defaults to SGMII mode at power-up, however if we switched it from some other mode like 1000Base-X, as may happen in some SFP module situations, it may not be, particularly for modules which have 1000Base-X auto-negotiation defaulting to disabled. Call genphy_check_and_restart_aneg on the fiber page to ensure that auto- negotiation is properly enabled on the SGMII interface. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16sfp: add support for 5gbase-t SFPsMarek Behún
The sfp_parse_support() function is setting 5000baseT_Full in some cases. Now that we have PHY_INTERFACE_MODE_5GBASER interface mode available, change sfp_select_interface() to return PHY_INTERFACE_MODE_5GBASER if 5000baseT_Full is set in the link mode mask. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phylink: Add 5gbase-r supportMarek Behún
Add 5GBASER interface type and speed to phylink. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16tg3: Remove unused PHY_BRCM flagsFlorian Fainelli
The tg3 driver tried to communicate towards the PHY driver whether it wanted RGMII in-band signaling enabled or disabled however there is nothing that looks at those flags in drivers/net/phy/broadcom.c so this does do not anything. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFPShyam Sundar S K
Frequent link up/down events can happen when a Bel Fuse SFP part is connected to the amd-xgbe device. Try to avoid the frequent link issues by resetting the PHY as documented in Bel Fuse SFP datasheets. Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Reset link when the link never comes backShyam Sundar S K
Normally, auto negotiation and reconnect should be automatically done by the hardware. But there seems to be an issue where auto negotiation has to be restarted manually. This happens because of link training and so even though still connected to the partner the link never "comes back". This needs an auto-negotiation restart. Also, a change in xgbe-mdio is needed to get ethtool to recognize the link down and get the link change message. This change is only required in a backplane connection mode. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warningShyam Sundar S K
The current driver calls netif_carrier_off() late in the link tear down which can result in a netdev watchdog timeout. Calling netif_carrier_off() immediately after netif_tx_stop_all_queues() avoids the warning. ------------[ cut here ]------------ NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220 Modules linked in: amd_xgbe(E) amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019 RIP: 0010:dev_watchdog+0x20d/0x220 Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48 RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0 RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018 R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000 R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0 Call Trace: <IRQ> ? pfifo_fast_reset+0x100/0x100 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 18:29:41 +0000