| Age | Commit message (Collapse) | Author |
|---|
|
We configure the minimum and maximum number of various types of IPA
resources in ipa_resource_config(). It iterates over resource types
in the configuration data and assigns resource limits to each
resource group for each type.
Unfortunately, we are repeatedly initializing the resource data for
the first type, rather than initializing each of the types whose
limits are specified.
Fix this bug.
Fixes: 4a0d7579d466e ("net: ipa: avoid going past end of resource group array")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable mfs_max is not initialized and is being compared to find
the maximum value. Fix this by initializing it to 0.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some internal PHY's have their events like link change reported by the
MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario.
I'm not too happy with this name. We don't ignore interrupts, typically
there is no interrupt exposed at a PHY level. So let's rename it to
PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is
called from the MAC interrupt handler to handle PHY events.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AR8035 recently gained MDIX support. The same functions will work for
the AR8031/33 PHY. We just need to add the at803x_config_aneg()
callback.
This was tested on a Kontron sl28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The work queue is used to queue reset requests like CHANGE-PARAM or
FAILOVER resets for the worker thread. When the adapter is being removed
the adapter state is set to VNIC_REMOVING and the work queue is flushed
so no new work is added. However the check for adapter being removed is
racy in that the adapter can go into REMOVING state just after we check
and we might end up adding work just as it is being flushed (or after).
The ->rwi_lock is already being used to serialize queue/dequeue work.
Extend its usage ensure there is no race when scheduling/flushing work.
Fixes: 6954a9e4192b ("ibmvnic: Flush existing work items before device removal")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Cc:Uwe Kleine-König <uwe@kleine-koenig.org>
Cc:Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BCM54210E/BCM50212E has been verified to work correctly with the
auto-power down configuration done by bcm54xx_adjust_rxrefclk(), add it
to the list of PHYs working.
While we are at it, provide an appropriate name for the bit we are
changing which disables the RXC and TXC during auto-power down when
there is no energy on the cable.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a number of unused flags defined today and since we are scarce
on space and may need to introduce new flags in the future remove and
shift every existing flag down into a contiguous assignment.
PHY_BCM_FLAGS_MODE_1000BX was only used internally for the BCM54616S
PHY, so we allocate a driver private structure instead to store that
flag instead of canibalizing one from phydev->dev_flags for that
purpose.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid a forward declaration by moving the callers of
bcm54xx_config_clock_delay() below its body.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Timeout reset will trigger the VIOS to unmap it automatically,
similarly as FAILVOER and MOBILITY events. If we unmap it
in the linux side, we will see errors like
"30000003: Error 4 in REQUEST_UNMAP_RSP".
So, don't call send_request_unmap for timeout reset.
Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_rmb() barrier is added to load the long term buffer before copying
it to socket buffer; and dma_wmb() barrier is added to update the
long term buffer before it being accessed by VIOS (virtual i/o server).
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CRQ and subCRQ descriptors are DMA mapped, so dma_wmb(),
though weaker, is good enough to protect the data structures.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only thing reset_long_term_buff() should do is set
buffer to zero. After doing that, it is not necessary to
send_request_map again to VIOS since it actually does not
change the mapping. So, keep memset function and remove all
others.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems that the right argument to be passed is &tcp_ip6_spec->ip6dst,
not &tcp_ip6_spec->ip6src, when calling function ipv6_addr_any().
Addresses-Coverity-ID: 1501734 ("Copy-paste error")
Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hardware comes up with default max frame size set to 1518. When using it
with switch it results in actual Ethernet MTU 1492:
1518 - 14 (Ethernet header) - 4 (Broadcom's tag) - 4 (802.1q) - 4 (FCS)
Above means hardware in its default state can't handle standard Ethernet
traffic (MTU 1500).
Define maximum possible Ethernet overhead and always set MAC max frame
length accordingly. This change fixes handling Ethernet frames of length
1506 - 1514.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs.
This patch contains only the basic function of the device. There is no
clock control, PM, etc. yet. These will be added in the future.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Armin reported that after referenced commit his RTL8105e is dead when
resuming from suspend and machine runs on battery. This patch has been
confirmed to fix the issue.
Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions")
Reported-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With MTU less than 1500B on all ports, the driver uses per CPU pool mode.
If one of the ports set to jumbo frame MTU size, all ports move
to shared pools mode.
Here, buffer manager TX Flow Control reconfigured on all ports.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1KB is enough for loopback port, so 2KB can be distributed
between other ports.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
default
The sja1105 driver has a limitation, extensively described under
Documentation/networking/dsa/sja1105.rst and
Documentation/networking/devlink/sja1105.rst, which says that when the
ports are under a bridge with vlan_filtering=1, traffic to and from
the network stack is not possible, unless the driver-specific
best_effort_vlan_filtering devlink parameter is enabled.
For users, this creates a 'wtf' moment. They need to go to the
documentation and find about the existence of this property, then maybe
install devlink and set it to true.
Having best_effort_vlan_filtering enabled by the kernel by default
delays that 'wtf' moment (maybe up to the point that it never even
happens). The user doesn't need to care that the driver supports
addressing the ports individually by retagging VLAN IDs until he/she
needs to use more than 32 VLAN IDs (since there can be at most 32
retagging rules). Only then do they need to think whether they need the
full VLAN table, at the expense of no individual port addressing, or
not.
But the odds that an sja1105 user will need more than 32 VLANs
terminated by the CPU is probably low. And, if we were to follow the
principle that more advanced use cases should require more advanced
preparation steps, then it makes more sense for ping to 'just work'
while CPU termination of > 32 VLAN IDs to require a bit more forethought
and possibly a driver-specific devlink param.
So we should be able to safely change the default here, and make this
driver act just a little bit more sanely out of the box.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->name is determined only after calling register_hdlc_device(),
however ,it is used by printk before the name is fully determined.
[ 4.565137] hdlc%d: detected at e8000000, irq 11
Instead of printing out a %d, print hdlc directly
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lmc set sc->lmc_media pointer when there is a matching device.
However, when no matching device is found, this pointer is NULL
and the following dereference will result in a null-ptr-deref.
To fix this issue, unregister the hdlc device and return an error.
[ 4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc]
[ 4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95
[ 4.570102]
[ 4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94
[ 4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4
[ 4.571125] Call Trace:
[ 4.571261] dump_stack+0x7d/0xa3
[ 4.571445] kasan_report.cold+0x10c/0x10e
[ 4.571667] ? lmc_init_one.cold+0x2b6/0x55d [lmc]
[ 4.571932] lmc_init_one.cold+0x2b6/0x55d [lmc]
[ 4.572186] ? lmc_mii_readreg+0xa0/0xa0 [lmc]
[ 4.572432] local_pci_probe+0x6f/0xb0
[ 4.572639] pci_device_probe+0x171/0x240
[ 4.572857] ? pci_device_remove+0xe0/0xe0
[ 4.573080] ? kernfs_create_link+0xb6/0x110
[ 4.573315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[ 4.573598] really_probe+0x161/0x420
[ 4.573799] driver_probe_device+0x6d/0xd0
[ 4.574022] device_driver_attach+0x82/0x90
[ 4.574249] ? device_driver_attach+0x90/0x90
[ 4.574485] __driver_attach+0x60/0x100
[ 4.574694] ? device_driver_attach+0x90/0x90
[ 4.574931] bus_for_each_dev+0xe1/0x140
[ 4.575146] ? subsys_dev_iter_exit+0x10/0x10
[ 4.575387] ? klist_node_init+0x61/0x80
[ 4.575602] bus_add_driver+0x254/0x2a0
[ 4.575812] driver_register+0xd3/0x150
[ 4.576021] ? 0xffffffffc0018000
[ 4.576202] do_one_initcall+0x84/0x250
[ 4.576411] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 4.576733] ? unpoison_range+0xf/0x30
[ 4.576938] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 4.577219] ? unpoison_range+0xf/0x30
[ 4.577423] ? unpoison_range+0xf/0x30
[ 4.577628] do_init_module+0xf8/0x350
[ 4.577833] load_module+0x3fe6/0x4340
[ 4.578038] ? vm_unmap_ram+0x1d0/0x1d0
[ 4.578247] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 4.578526] ? module_frob_arch_sections+0x20/0x20
[ 4.578787] ? __do_sys_finit_module+0x108/0x170
[ 4.579037] __do_sys_finit_module+0x108/0x170
[ 4.579278] ? __ia32_sys_init_module+0x40/0x40
[ 4.579523] ? file_open_root+0x200/0x200
[ 4.579742] ? do_sys_open+0x85/0xe0
[ 4.579938] ? filp_open+0x50/0x50
[ 4.580125] ? exit_to_user_mode_prepare+0xfc/0x130
[ 4.580390] do_syscall_64+0x33/0x40
[ 4.580586] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 4.580859] RIP: 0033:0x7f1a724c3cf7
[ 4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891
[ 4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7
[ 4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003
[ 4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[ 4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0
[ 4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001
[ 4.584349] ==================================================================
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Smatch is confused by the fact that a 32-bit BIT(port) macro is passed
as argument to the ocelot_ifh_set_dest function and warns:
ocelot_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type?
seville_xmit() warn: should '(((1))) << (dp->index)' be a 64 bit type?
The destination port mask is copied into a 12-bit field of the packet,
starting at bit offset 67 and ending at 56.
So this DSA tagging protocol supports at most 12 bits, which is clearly
less than 32. Attempting to send to a port number > 12 will cause the
packing() call to truncate way before there will be 32-bit truncation
due to type promotion of the BIT(port) argument towards u64.
Therefore, smatch's fears that BIT(port) will do the wrong thing and
cause unexpected truncation for "port" values >= 32 are unfounded.
Nonetheless, let's silence the warning by explicitly passing an u64
value to ocelot_ifh_set_dest, such that the compiler does not need to do
a questionable type promotion.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation for the PHY update [1] states:
Loop 4 times with index i
If PHY Revision >= 3
Copy table[i] to coef[i]
Otherwise
Set coef[i] to 0
the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.
[1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/
Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
and ulds
The Max imm data size in cxgb4 is not similar to the max imm data size
in the chtls. This caused an mismatch in output of is_ofld_imm() of
cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data
same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN.
As cxgb4's max imm. data value for ofld packets is changed to
MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also.
Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
idt77252 is broken and wont load on amd64 systems
modprobe idt77252 shows the following
idt77252_init: skb->cb is too small (48 < 56)
Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data
so that the total size can be <= sizeof(skb->cb)
Also convert runtime size check to buildtime size check in
idt77252_init()
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Armin reported that after referenced commit his RTL8105e is dead when
resuming from suspend and machine runs on battery. This patch has been
confirmed to fix the issue.
Fixes: e80bd76fbf56 ("r8169: work around power-saving bug on some chip versions")
Reported-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for Thermal Monitoring part of PMIC5. This part is closely
coupled with ADC, using it's channels directly. ADC-TM support
generating interrupts on ADC value crossing low or high voltage bounds,
which is used to support thermal trip points.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205000118.493610-3-dmitry.baryshkov@linaro.org
|
|
into testing
|
|
When we set bit 10 high we use continuous mode and not single
mode. Let's correct this to avoid confusion. No functional
changes here, the code does the right thing with bit 10.
Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205134534.49200-5-tony@atomide.com
|
|
We can use iopoll for checking the EOCZ (end of conversion) bit. And with
this we now also want to handle the timeout errors properly.
For omap3, we need about 1.2ms for the single mode sampling to wait for
EOCZ down, so let's use 1.5ms timeout there. Waiting for sampling to start
is faster and we can use 1ms timeout.
Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205134534.49200-4-tony@atomide.com
|
|
At least for 4430, trying to use the single conversion mode eventually
hangs the thermal sensor. This can be quite easily seen with errors:
thermal thermal_zone0: failed to read out thermal zone (-5)
Also, trying to read the temperature shows a stuck value with:
$ while true; do cat /sys/class/thermal/thermal_zone0/temp; done
Where the temperature is not rising at all with the busy loop.
Additionally, the EOCZ (end of conversion) bit is not rising on 4430 in
single conversion mode while it works fine in continuous conversion mode.
It is also possible that the hung temperature sensor can affect the
thermal shutdown alert too.
Let's fix the issue by adding TI_BANDGAP_FEATURE_CONT_MODE_ONLY flag and
use it for 4430.
Note that we also need to add udelay to for the EOCZ (end of conversion)
bit polling as otherwise we have it time out too early on 4430. We'll be
changing the loop to use iopoll in the following clean-up patch.
Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205134534.49200-3-tony@atomide.com
|
|
On dra7, there is no Start of Conversion (SOC) register bit and we have an
empty bgap_soc_mask in the configuration for the thermal driver. Let's not
do pointless reads and writes with the empty mask.
There's also no point waiting for End of Conversion bit (EOCZ) to go high
on dra7. We only care about it going down, and are now mostly timing out
waiting for EOCZ high while it has already gone down.
When we add checking for the timeout errors in a later patch, waiting for
EOCZ high would cause bogus time out errors.
Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210205134534.49200-2-tony@atomide.com
|
|
* powercap:
powercap: intel_rapl: Use topology interface in rapl_init_domains()
powercap: intel_rapl: Use topology interface in rapl_add_package()
powercap/intel_rapl: add support for AlderLake Mobile
powercap/drivers/dtpm: Fix size of object being allocated
powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check
powercap/drivers/dtpm: Fix some missing unlock bugs
powercap/drivers/dtpm: Fix a double shift bug
powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols
powercap/drivers/dtpm: Add CPU energy model based support
powercap/drivers/dtpm: Add API for dynamic thermal power management
Documentation/powercap/dtpm: Add documentation for dtpm
units: Add Watt units
* pm-misc:
PM: Kconfig: remove unneeded "default n" options
PM: EM: update Kconfig description and drop "default n" option
|
|
* acpi-messages:
ACPI: OSL: Clean up printing messages
ACPI: OSL: Rework acpi_check_resource_conflict()
ACPI: thermal: Clean up printing messages
ACPI: video: Clean up printing messages
ACPI: button: Clean up printing messages
ACPI: battery: Clean up printing messages
ACPI: AC: Clean up printing messages
ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
ACPI: utils: Clean up printing messages
ACPI: scan: Clean up printing messages
ACPI: bus: Clean up printing messages
ACPI: PM: Clean up printing messages
ACPI: power: Clean up printing messages
|
|
'acpi-apei'
* acpi-misc:
ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
* acpi-cppc:
ACPI: CPPC: initialise vaddr pointers to NULL
ACPI: CPPC: add __iomem annotation to generic_comm_base pointer
ACPI: CPPC: remove __iomem annotation for cpc_reg's address
* acpi-docs:
Documentation: ACPI: add new rule for gpio-line-names
* acpi-config:
ACPI: configfs: add missing check after configfs_register_default_group()
* acpi-apei:
ACPI: APEI: ERST: remove unneeded semicolon
ACPI: APEI: Add is_generic_error() to identify GHES sources
|
|
* acpi-scan:
ACPI: scan: Rearrange code related to acpi_get_device_data()
ACPI: scan: Adjust white space in acpi_device_add()
ACPI: scan: Rearrange memory allocation in acpi_device_add()
* acpi-properties:
ACPI: property: Satisfy kernel doc validator (part 2)
ACPI: property: Satisfy kernel doc validator (part 1)
ACPI: property: Make acpi_node_prop_read() static
ACPI: property: Remove dead code
ACPI: property: Fix fwnode string properties matching
* acpi-platform:
ACPI: platform-profile: Fix possible deadlock in platform_profile_remove()
ACPI: platform-profile: Introduce object pointers to callbacks
ACPI: platform-profile: Drop const qualifier for cur_profile
ACPI: platform: Add platform profile support
Documentation: Add documentation for new platform_profile sysfs attribute
|
|
* pm-devfreq:
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
PM / devfreq: Correct spelling in a comment
* pm-tools:
cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
cpupower: Remove family arg to decode_pstates()
cpupower: Condense pstate enabled bit checks in decode_pstates()
cpupower: Update family checks when decoding HW pstates
cpupower: Remove unused pscur variable.
cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
cpupower: Correct macro name for CPB caps flag
cpupower: Update msr_pstate union struct naming
cpupower: add Makefile dependencies for install targets
|
|
* pm-opp: (37 commits)
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
cpufreq: qcom: Migrate to dev_pm_opp_set_opp()
opp: Implement dev_pm_opp_set_opp()
opp: Update parameters of _set_opp_custom()
opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
opp: Allow _generic_set_opp_regulator() to work for non-freq devices
opp: Allow _set_opp() to work for non-freq devices
opp: Split _set_opp() out of dev_pm_opp_set_rate()
opp: Keep track of currently programmed OPP
opp: No need to check clk for errors
...
|
|
* pm-sleep:
PM: sleep: Constify static struct attribute_group
PM: sleep: Use dev_printk() when possible
PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads()
* pm-core:
PM: runtime: Fix typos and grammar
PM: runtime: Fix resposible -> responsible in runtime.c
* pm-domains:
PM: domains: Simplify the calculation of variables
PM: domains: Add "performance" column to debug summary
PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER
PM: domains: Make set_performance_state() callback optional
PM: domains: use device's next wakeup to determine domain idle state
PM: domains: inform PM domain of a device's next wakeup
* pm-clk:
PM: clk: make PM clock layer compatible with clocks that must sleep
|
|
* pm-cpuidle:
MAINTAINERS: cpuidle: exynos: include header in file pattern
intel_idle: remove definition of DEBUG
* pm-cpufreq:
cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
cpufreq: Remove CPUFREQ_STICKY flag
cpufreq: intel_pstate: Remove repeated word
cpufreq: remove tango driver
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: qcom-hw: enable boost support
cpufreq: tegra20: Use resource-managed API
cpufreq: intel_pstate: Get per-CPU max freq via MSR_HWP_CAPABILITIES if available
cpufreq: intel_pstate: Rename two functions
cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
cpufreq: intel_pstate: Always read hwp_cap_cached with READ_ONCE()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier
- New driver for the MIPS-based Realtek RTL838x/RTL839x SoC
- Conversion of the sun6i-r support code to a hierarchical setup
- Fix wake-up interrupts for the ls-extirq driver
- Fix MSI allocation for the loongson-pch-msi driver
- Add compatible strings for new Qualcomm SoCs
- Tidy up a few Kconfig entries (IMX, CSKY)
- Spelling phyksiz
- Remove the sirfsoc and tango drivers
Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
|
|
This reverts commit a8c3209998afb5c4941b49e35b513cea9050cb4a.
It is reported that the said commit caused regression in netvsc.
Reported-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
- use predefined constants instead of plain numbers
- use provided bank IRQ number instead of defined constant
for port F
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
- replace plain numbers with girq->num_parents in devm_kcalloc
- replace plain numbers with girq->num_parents for port F
- refactor i - 1 to i + 1 to make loop more readable
- combine getting IRQ's loop and setting handler's into single loop
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Fix typo in comment.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
As ->to_irq is redefined in gpiochip_add_irqchip, having it defined in
driver is useless, so let's drop it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Port F IRQ's should be statically mapped to EP93XX_GPIO_F_IRQ_BASE.
So we need to specify girq->first otherwise:
"If device tree is used, then first_irq will be 0 and
IRQ's get mapped dynamically on the fly"
And that's not the thing we want.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Add check to see if gpio-width property does not exceed 32.
If it exceeds then return -EINVAL.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Add support for suspend and resume, pm runtime suspend and resume.
Added free and request calls.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
Adds interrupt support to the Xilinx GPIO driver so that rising and
falling edge line events can be supported. Since interrupt support is
an optional feature in the Xilinx IP, the driver continues to support
devices which have no interrupt provided.
Depends on OF_GPIO framework for of_xlate function to translate
gpiospec to the GPIO number and flags.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
